5in1 Oil Stabiliser is a product specially developed to compensate for wear in old engines and gearboxes and prevent the wear process in new engines and gearboxes. This special blend allows engine and gearboxes to achieve higher fluidity levels. It prevents viscosity decomposition at high temperatures, even in the most extreme conditions. It also ensures that the oil lasts 50% longer. Oil treated with 5in1 Oil Stabiliser does not flow out of the cylinders after decommissioning. This prevents dry starting which is the main cause of wear in an otherwise well-maintained engine.

5in1 Oil Stabilizer has been specially developed with molybdenum to prevent blow-through. Breakthrough occurs when the explosion that takes place in the combustion chamber of your engine causes fuel, air and moisture to pass through the rings in the crankcase. Your engine's rings need to remain in excellent condition to maintain pressure. Less passage means less contamination, less fuel dilution and more power. The cleaning agents and the disulphide in the molybdenum work together to remove soot and deposits from your rings so they seal the combustion chamber better. The molybdenum fills the gaps in the cylinder walls resulting in a better seal. Ordinary mo- tor oil is developed against the tolerance of new engines. Once an engine starts to wear, the wear process proceeds at a rapid pace, as engine oil alone cannot fill the space between the moving parts.

5in1 Oil Stabiliser has been developed for both old and new engines. The formula of 5in1 Oil Stabiliser helps worn engines to properly seal and fill the moving parts to reduce oil consumption and reduce further wear. It also stops most leaks in seals. The product can be used with all automotive lubricants, both synthetic and mineral oil and ATF.

Properties
- Increases oil pressure
- Stops smoking exhaust
- Reduces engine noise
- Reduces valve ticking and piston tilting Fuel saving by stopping blow- by.
- Stops oil consumption
- Reduces friction through strong film coating
- Starts faster at cold temperatures

Instructions for use
Add at warm engine while idling. Best result after oil change, add after every oil change. One 400 ml bottle is sufficient for 3 to 6 litres of engine oil. Do not use with wet clutch.
For heavily worn engines: add 2 bottles.