MARTEN REPELLENT
Produces loud and pulsating ultrasonic sounds which are not perceptible by people. The marten experiences these sounds as extremely awkward and will try to avoid them. For use in cars, on attics and in houses. 1A fuse.
MARTEN REPELLENT
The martin is a protected animal species and must therefore be repelled in an animal-friendly manner. Ultra-modern microelectronic CMOS technology and high-frequency sound make the device very reliable.
MARTEN REPELLENT
Kemo.100n. The martin is a protected animal species and must therefore be repelled in an animal-friendly manner. The product is equipped with an LED to indicate whether the device is operating.
Marten repellent 12V
Kemo.100n. The marten is a protected animal species and must therefore be repelled in an animal-friendly manner. The product is equipped with an LED to indicate whether the device is operating.
Marternator Marten Repeller
Marternator scares away martens with piercing, ultrasound frequencies (above 20 kHz). Highly effective ultrasonic device connects to the on-board power supply. The device contains zero chemical raw materials and does no harm to other equipment and electrical appliances. Ultrasound is not audible to humans. The device lets out an ultrasonic frequency above 20 kHz to expel rodents safely. Installation: 1.Connect the red wire to the battery (direct current 12V) ?+?side and connect the black wire to the ??side. 2.Connect the optional green wire to the engine + current which indicates if the engine is working. 3.If the green wire is connected, the device will work when the car engine is turned off, and the device will stop working when the car is started. 4.If all is connected properly, the LED light will first blink, and then light up continuously. Tip: If the marten/rodent has already left its scent markings, it is imperative that these be removed by thoroughly washing the engine and car. This also applies to the parking spot, garage, car port, etc. The marten/rodent may feel the need to defend its territory if this measure is not taken. Specification: Power supply: 12V Frequency: 20 kHz-60kHz Power Consumption: 6 mA Sound pressure: 90dB Operating temperature range: approx. 30 °C to 70 °C Important: Please note that the high, ultrasound frequencies emitted cause considerable stress to martens. The martens generally flee to where they are not exposed to the bothersome tones. However, we cannot guarantee that the martens will be expelled in 100% of all cases.
Slime Smart Repair Compressor Set 50050
Back on the road in 15 minutes with the 12 Volt Slime Smart Repair Compressor Set without having to dismount the wheel, no jack or tools needed. The TMPS water-based sealant seals punctures up to 6mm. The compact inflator allows to regain full inflation. Content: - 12V inflator with integrated gauge - 473ml sealant bottle - Adaptors for inflatables - Tool to dismount the valve core - Canvas bag for storage