Professional paint correction for detailers, garages and other car detailing companies.

- Removes sanding marks and holograms from step 1
- Refines the paintwork and restores shine
- Perfect in combination with our Gecko Polisher (item no. 687812)

The Gecko Pro Compound Step 2 is a medium-cut polishing compound specially developed for the second step in the paint correction process. This high-quality compound removes sanding scratches (P1200-P3000), car wash scratches, polishing marks and paint imperfections left behind after coarse polishing with the Gecko Pro Super Cut (Step 1). Ideal for refining the paintwork and restoring an even, deep shine.

Thanks to its balanced formula, Gecko Pro Compound ensures a smooth and shiny surface without dust formation or micro-scratches. Use this product in combination with the Gecko Medium Polishing Pad for the best results.

Please note: This compound does not provide definitive protection. For an optimal finish and paint seal, we recommend finishing with Gecko Pro Wax Guard (item number 687692).

Application & Use

The Gecko Pro Compound has been developed for professional use in the second phase of the polishing process. all paint types, including sensitive or dark paints where a perfect finish is essential. View the complete Gecko Pro-Line range for a complete multi-step paint treatment.

Instructions

Use the Gecko polishing machine with the Gecko Light Cutting Pad and sufficient product. Shake well before use and remove any irregularities with suitable sandpaper.

1. Preparation: Make sure the paintwork is clean and dry. For best results, start with Gecko Pro Super Cut (Step 1) to remove deeper defects.
2. Application: Apply a small amount of compound to the Gecko Light Cutting Pad.
3. Distribution: Distribute the product evenly over the surface to be treated at low speed.
4. Polishing: Increase the speed to 1500 - 2000 rpm and work in overlapping strokes of approximately 1 m². Repeat if necessary for a deeper shine.
5. Wiping: Remove excess product with a clean Gecko Microfibre Cloth from the 5-pack (item no. 687853).
6. After-treatment: Finish with Gecko Pro Wax Finish & Protect (item no. 687692) for protection and long-lasting shine. If necessary, you can first continue with Gecko Pro Fine Finish (Step 3) for further finishing.


Tip from the professional
Allow the Gecko Pro Compound to do its work. Work in calm, overlapping strokes and maintain even pressure. Gecko Pro Compound is designed so that the abrasive particles gradually break down during polishing. So give the product time to work in fully — you will notice that it becomes increasingly transparent. Only then will you get the most out of this polishing step. Stopping too soon often means you have to start all over again later.