JL Audio subwoofer in kist CLS113RG-W7 Geschlossene Bassreflex-Subbox mit 13W7-D1.5 Aluguss-Subwoofer Dauerbelastbarkeit 1.500 Watt, Impedanz 3 Ohm Aluminium-Schutzbugel Frontpartie in Klavierlack/schwarz Abmessungen: 572 x 464 x 464/292 mm For those who seek the ultimate in compact-enclosure sub-bass fidelity, we offer this sealed ProWedge system, in which the superb performance capabilities of the W7AE subwoofer driver are harnessed within a compact, sealed enclosure. This system has it all: extension, impact, detail and smooth response... at any listening level. This enclosure design has been carefully engineered to the optimum sealed enclosure alignment for the 13W7-D1.5 and has been fine-tuned through extensive real-world listening. This subwoofer system is shipped wired, loaded and ready to connect via a five-way binding post terminal. The angled-back design saves precious cargo space by allowing the enclosure to fit tightly against the back of a vehicle's rear seat. Finish: Black, high-grade automotive carpet, with gloss-black laminated decorative front baffle trim. Three solid aluminum bars provide stylish and rugged woofer protection.

JL audio subwoofer in kist CP106LG-W3v3     16,5 cm Ported Enclosure 150 Watts RMS, Impendance 4 Ohm Grey Carpet, 1 x 6W3v3-4 (16,5 cm) driver 36 x 25 x 13 cm   This particular series harnesses the powerful attributes of the W3v3 subwoofer drivers in compact enclosures that deliver superb bass with strong output. The CNC-Cut MDF enclosure is covered with dark gray high-grade automotive carpet. The angled-back design saves precious cargo space and a steel mesh grille is included to protect the subwoofer driver.  

JL audio subwoofer in kist CP108LG-W3v3 Bassreflex-Subbox mit 20 cm 8W3v3 Subwoofer Dauerbelastbarkeit 250 Watt, Impedanz 4 Ohm in extraflacher Ausführung mit schwarzem Teppich Abmessungen: 473 x 130 x 279 mm This incredible MicroSub subwoofer system delivers the kind of output and extension that is normally possible with only much larger systems. The key to its performance lies in the precise tuning of its 8W3v3 subwoofer driver into an efficient slot-ported design. Extensive interior bracing permits the use of thinner wall material that maximizes the enclosure's internal volume relative to its exterior volume. The port wraps around two walls of the enclosure to produce the necessary low tuning frequency that ensures excellent extension and response smoothness. The flared port entry and exit further enhance sound quality by minimizing air-flow noises through the port. This subwoofer system is shipped wired, loaded and ready to connect via a five-way binding post terminal. Finish: Black, high-grade automotive carpet with silver JL AUDIO embroidery on front baffle. A steel mesh grille is included to protect the subwoofer driver.

JL audio subwoofer in kist CP110-W1v2 Dauerbelastbarkeit 300 Watt, Impedanz 4 Ohm 25 cm Bassreflexbox mit Frontgitter, Aluminium-Blenden und Logo-Stick, Teppich schwarz, mit 10W1v2-4 Subwoofer Abmessungen: 510 x 340 x 370/220 mm

JL Audio subwoofer in kist CP112-W0v2 Dauerbelastbarkeit 300 Watt Impedanz 4 Ohm, Bassreflex-Box mit 12WØv2 Subwoofer in neuem Gehäuse-Design This powerful slot-ported BassWedge subwoofer system delivers awesome output and unsurpassed value. The slot-port runs along the bottom of the enclosure and fires on the same plane as the woofer to produce excellent extension and response smoothness. The port mouth is flared to minimize air-flow noises. The ultra-versatile BassWedge shape has extended sides so that it can be placed with the woofer firing out or straight down, off the floor of the vehicle. The shape works equally well in forward or rear-firing installations. This gives you plenty of options for tweaking the loading of the enclosure into your vehicle. This subwoofer system is shipped wired, loaded and ready to connect via a push-button terminal. Finish: Dark gray, high-grade automotive carpet with JL AUDIO embroidery on the top edge and Slot-Ported BassWedge embroidered on the port mouth.

JL audio subwoofer in kist CP112-W1v2 Dauerbelastbarkeit 300 Watt, Impedanz 4 Ohm 30 cm Bassreflexbox mit Frontgitter, Aluminium-Blenden und Logo-Stick, Teppich schwarz, mit 12W1v2-4 Subwoofer Abmessungen: 590 x 395 x 480/310 mm

JL audio subwoofer in kist CP208LG-W3v3     2 x 20 cm Ported Enclosure 500 Watts RMS, Impendance 2 Ohms Grey Carpet, 2 x 8W3v3-4 (20 cm) driver 90,5 x 28 x13 cm This particular series harnesses the powerful attributes of the W3v3 subwoofer drivers in compact enclosures that deliver superb bass with strong output. The CNC-Cut MDF enclosure is covered with dark gray high-grade automotive carpet. The angled-back design saves precious cargo space and a steel mesh grille is included to protect the subwoofer driver.  

JL Audio subwoofer in kist CP212-W0v2 Dauerbelastbarkeit 600 Watt, Impedanz 2 Ohm, Bassreflex-Box mit zwei 12W0v2 Subwoofer in neuem Gehäuse-Design This powerful slot-ported BassWedge subwoofer system delivers awesome output and unsurpassed value. The slot-port runs along the bottom of the enclosure and fires on the same plane as the woofers to produce excellent extension and response smoothness. The port mouth is flared to minimize air-flow noises. The ultra-versatile BassWedge shape has extended sides so that it can be placed with the woofers firing out or straight down, off the floor of the vehicle. The shape works equally well in forward or rear-firing installations. This gives you plenty of options for tweaking the loading of the enclosure into your vehicle. This subwoofer system is shipped wired, loaded and ready to connect via a push-button terminal. Finish: Dark gray, high-grade automotive carpet with JL AUDIO embroidery on the top edge and "Slot-Ported BassWedge embroidered on the port mouth.

JL Audio subwoofer in kist CS112-WX Geschlossene Subbox mit 12WX Subwoofer Dauerbelastbarkeit 200 Watt, Impedanz 4 Ohm Teppich dunkelgrau, Abmessungen: 495 x 387 x 298 mm This compact BassWedge™ subwoofer system delivers great-sounding sub-bass at an unsurpassed value. This subwoofer system is shipped wired, loaded and ready to connect via a push-button terminal. Finish: Dark gray, high-grade automotive carpet with "JL AUDIO" embroidery on the top surface. Construction: MDF Recommended amplifier power: 75 - 200W

JL Audio subwoofer in kist CS212-WX Geschlossene Subbox mit zwei 12WX Subwoofern Dauerbelastbarkeit 400 Watt, Impedanz 2 Ohm Mono Teppich dunkelgrau, Abmessungen: 813 x 387 x 298 mm This compact BassWedge™ subwoofer system delivers great-sounding sub-bass at an unsurpassed value. This subwoofer system is shipped wired, loaded and ready to connect via a push-button terminal. Finish: Dark gray, high-grade automotive carpet with "JL AUDIO" embroidery on the top surface. Construction: MDF Recommended amplifier power: 150 - 400W

JL Audio subwoofer in kist CVS110RG-W6v2 Geschlossene Bassreflex-Subbox mit 10W6v2-D4 Aluguss-Subwoofer Dauerbelastbarkeit 600 Watt, Impedanz 4 Ohm mit Frontgitter Abmessungen: 406 x 324 x 286/178 mm If you need a highly compact subwoofer solution that does not sacrifice sound quality, this ProWedge system is made for you. The superb performance capabilities of the W6v2 subwoofer driver are harnessed within a very compact, sealed enclosure. This system has it all: extension, impact, detail and smooth response... at any listening level. This enclosure design has been carefully engineered to the optimum sealed enclosure alignment for the 10W6v2 and has been fine-tuned through extensive real-world listening. This subwoofer system is shipped wired, loaded and ready to connect via a five-way binding post terminal. The angled-back design saves precious cargo space by allowing the enclosure to fit tightly against the back of a vehicle's rear seat. Finish: Black, high-grade automotive carpet on the top, back and bottom surfaces, with black vinyl on the front baffle and sides. A steel mesh grille is included to protect the subwoofer driver.

JL audio subwoofer in kist CVS112RG-W6v2 Geschlossene Bassreflex-Subbox mit 12W6v2-D4 Aluguss-Subwoofer Dauerbelastbarkeit 600 Watt, Impedanz 4 Ohm mit Frontgitter Abmessungen: 610 x 375 x 318/184 mm If you need a highly compact subwoofer solution that does not sacrifice sound quality, this ProWedge system is made for you. The superb performance capabilities of the W6v2 subwoofer driver are harnessed within a very compact, sealed enclosure. This system has it all: extension, impact, detail and smooth response... at any listening level. This enclosure design has been carefully engineered to the optimum sealed enclosure alignment for the 12W6v2 and has been fine-tuned through extensive real-world listening. This subwoofer system is shipped wired, loaded and ready to connect via a five-way binding post terminal. The angled-back design saves precious cargo space by allowing the enclosure to fit tightly against the back of a vehicle's rear seat. Finish: Black, high-grade automotive carpet on the top, back and bottom surfaces, with black vinyl on the front baffle and sides. A steel mesh grille is included to protect the subwoofer driver.

JL audio subwoofer in kist HO110RG-W3v3 Bassreflex-Subbox mit 25 cm12W3v3 Subwoofer Dauerbelastbarkeit 500 Watt, Impedanz 4 Ohm mit Schutzbügel Abmessungen: 749 x 343 x 305/191 mm JL Audio's patented High Output Enclosures are designed to deliver the ultimate high-performance bass experience with a rare combination of superb sound quality and awesome output. JL Audio's patented, chamber-coupled port design (U.S. patent #6,625,292) wraps around the inner enclosure boundary and terminates on one side of the woofer, coupling the port output to the woofer's direct output. This also provides the necessary surface area and port length to maximize the performance of the W3v3 driver. This enclosure design has been carefully engineered to the optimum ported alignment for the 10W3v3, and has been fine-tuned through extensive real-world listening. This efficient system will produce superb output with as little as 150W of amplifier power, but performs best with 300 - 500 W of power. This subwoofer system is shipped wired, loaded and ready to connect via a five-way binding post terminal. Three solid aluminum bars provide stylish and rugged woofer protection. The angled-back design saves precious cargo space by allowing the enclosure to fit tightly against the back of a vehicle's rear seat.

JL audio subwoofer in kist HO112RG-W3v3 Bassreflex-Subbox mit 30 cm 12W3v3 Subwoofer Dauerbelastbarkeit 500 Watt, Impedanz 2 Ohm mit Schutzbügel Abmessungen: 819 x 387 x 343/191 mm JL Audio's patented High Output Enclosures are designed to deliver the ultimate high-performance bass experience with a rare combination of superb sound quality and awesome output. JL Audio's patented, chamber-coupled port design (U.S. patent 6,625,292) wraps around the inner enclosure boundary and terminates on one side of the woofer, coupling the port output to the woofer's direct output. This also provides the necessary surface area and port length to maximize the performance of the W3v3 driver. This enclosure design has been carefully engineered to the optimum ported alignment for the 12W3v3, and has been fine-tuned through extensive real-world listening. This efficient system will produce superb output with as little as 150W of amplifier power, but performs best with 300 - 500 W of power. This subwoofer system is shipped wired, loaded and ready to connect via a five-way binding post terminal. Three solid aluminum bars provide stylish and rugged woofer protection. The angled-back design saves precious cargo space by allowing the enclosure to fit tightly against the back of a vehicle's rear seat. Finish: Dark gray, high-grade automotive carpet, with black carpet on woofer baffle. JL AUDIO is embroidered in silver on the top surface of the enclosure.

Strakke, krachtige bas. De TS-WX303 is vervaardigd uit dik MDF en staat daarmee garant voor stevigheid en stabiliteit. Deze subwoofer met basreflex heeft een fijn afgestemde basreflexpoort om krachtige bastonen te reproduceren. De TS-WX303 heeft nu een nog groter vermogen van 1200 W en is bovendien uitgerust met een IMPP™-conus (Injection Moulded Polypropylene), die bestaat uit gevlochten aramidevezels die in elkaar overgaan, wat de woofer superstevig, maar toch ook licht maakt: ideaal voor lage vervorming en een krachtige bas bij hoge volumes. De TS-WX303 heeft een verlengd, geventileerd pooljuk, wat een aanzienlijke verbetering op het vlak van lineariteit oplevert. Bekijk zeker ook onze GM-3400T-versterker, de ideale aanvulling op de TS-WX303 voor een optimale geluidservaring in de auto.

Rockford Fosgate Prime 2 x 10inch (30cm) R1-2X10 subwoofer in kist   De R1-2X10 is een geladen behuizing met dual 10 "subwoofers gebouwd met duurzame MDF, high-density tapijt, en is voorzien van quick release klemmen om meteen te verwijderen of vervangen van de behuizing in uw rit.        Gebouwd met 5/8 "MDF      Bedekt met een hoge dichtheid tapijt      Hoge huidige bindende berichten

The PRIME series full-range speakers with three models are the perfect entry into the world of the famous Rockford Fosagte sound without busting your budget. SUBWOOFERS • 2.0 (50 mm) voice coil • Anodized aluminum voice coil former • Compression terminals • Parabolic polypropylene cone • Shallow stamped steel basket • Optimized for sealed enclosures ENCLOSURES • Loaded with PUNCH R1 Subwoofers R1L-1X10 10” (25 cm) Sealed Subbox 150/300 Watts RMS/MAX., 4 Ohms Dimensions: 35,5 x 40,1 x 31,1 cm

The PRIME series full-range speakers with three models are the perfect entry into the world of the famous Rockford Fosagte sound without busting your budget. ENCLOSURES • Loaded with PUNCH R1 Subwoofers R1L-2X10 2 x 10” (25 cm) Sealed Subbox 300/600 Watts RMS/MAX., 2 Ohms Dimensions: 30,5 x 76,2 x 31,1 cm

PUNCH serie enorm vermogen in een kleiner chassis ontwerpen. De beste waarde subwoofers in de car audio! Al langer als 25 jaar zijn de Punch subwoofers al een standaard in de car audio industrie van vandaag. Dit is dan ook een goede reden om ook voor de Punch subwoofer te kiezen. Elke Punch subwoofer geeft een sonische perfectie met een geweldige kracht in een compact behuizing! Rockford Fosgate P2-1X10 CEA-2031 Compliant     CEA-2031 Guidelines Woofer Quantity     1 Woofer Size     10" Woofer Series     Punch P2D2-10 Nominal Impedance (ea)     Dual 2-Ohm DVC Internally wired in parallel to create a 1-Ohm amplifier load Power Handling     300 Watts RMS 600 Watts Max System Configuration     Vented Enclosure Material     5/8" MDF (Medium Density Fiberboard) Speaker Connector     Up to 10 AWG compression terminals Shipping Weight     41.25 Lbs. (18.71 kg) Dimensions     13.125" x 17" x 15.125" (33.3cm x 43.2cm x 38.4cm)

PUNCH serie enorm vermogen in een kleiner chassis ontwerpen. De beste waarde subwoofers in de car audio! Al langer als 25 jaar zijn de Punch subwoofers al een standaard in de car audio industrie van vandaag. Dit is dan ook een goede reden om ook voor de Punch subwoofer te kiezen. Elke Punch subwoofer geeft een sonische perfectie met een geweldige kracht in een compact behuizing! Rockford Fosgate P2-1X12 CEA-2031 Compliant     CEA-2031 Guidelines Woofer Quantity     2 Woofer Size     12" Woofer Series     Punch P2D4-12 Nominal Impedance (ea)     Dual 4-Ohm DVC Internally wired in parallel to create a 1-Ohm amplifier load Power Handling     800 Watts RMS 1600 Watts Max System Configuration     Vented Enclosure Material     5/8" MDF (Medium Density Fiberboard) Speaker Connector     Up to 10 AWG compression terminals Shipping Weight     77.35 Lbs. (35.08 kg) Dimensions     15.125" x 33.875" x 15.75" (38.4cm x 86cm x 40cm)

PUNCH serie enorm vermogen in een kleiner chassis ontwerpen. De beste waarde subwoofers in de car audio! Al langer als 25 jaar zijn de Punch subwoofers al een standaard in de car audio industrie van vandaag. Dit is dan ook een goede reden om ook voor de Punch subwoofer te kiezen. Elke Punch subwoofer geeft een sonische perfectie met een geweldige kracht in een compact behuizing! Rockford Fosgate P2-2X10 Description     Value CEA-2031 Compliant     CEA-2031 Guidelines Woofer Quantity     2 Woofer Size     10" Woofer Series     Punch P2D4-10 Nominal Impedance (ea)     Dual 4-Ohm DVC Internally wired in parallel to create a 1-Ohm amplifier load Power Handling     600 Watts RMS 1200 Watts Max System Configuration     Vented Enclosure Material     5/8" MDF (Medium Density Fiberboard) Speaker Connector     Up to 10 AWG compression terminals Shipping Weight     70.2 Lbs. (31.84 kg) Dimensions     13.125" x 31.125" x 15.125" (33.3cm x 79.1cm x 38.4cm)

PUNCH serie enorm vermogen in een kleiner chassis ontwerpen. De beste waarde subwoofers in de car audio! Al langer als 25 jaar zijn de Punch subwoofers al een standaard in de car audio industrie van vandaag. Dit is dan ook een goede reden om ook voor de Punch subwoofer te kiezen. Elke Punch subwoofer geeft een sonische perfectie met een geweldige kracht in een compact behuizing! Rockford Fosgate P2-2X12 CEA-2031 Compliant     CEA-2031 Guidelines Woofer Quantity     2 Woofer Size     12" Woofer Series     Punch P2D4-12 Nominal Impedance (ea)     Dual 4-Ohm DVC Internally wired in parallel to create a 1-Ohm amplifier load Power Handling     800 Watts RMS 1600 Watts Max System Configuration     Vented Enclosure Material     5/8" MDF (Medium Density Fiberboard) Speaker Connector     Up to 10 AWG compression terminals Shipping Weight     77.35 Lbs. (35.08 kg) Dimensions     15.125" x 33.875" x 15.75" (38.4cm x 86cm x 40cm)

PUNCH serie enorm vermogen in een kleiner chassis ontwerpen. De beste waarde subwoofers in de car audio! Al langer als 25 jaar zijn de Punch subwoofers al een standaard in de car audio industrie van vandaag. Dit is dan ook een goede reden om ook voor de Punch subwoofer te kiezen. Elke Punch subwoofer geeft een sonische perfectie met een geweldige kracht in een compact behuizing! Rockford Fosgate P3-1X12 CEA-2031 Compliant     CEA-2031 Guidelines Woofer Quantity     1 Woofer Size     12" Woofer Series     Punch P3D2-12 Nominal Impedance (ea)     Dual 2-Ohm DVC Internally wired in parallel to create a 1-Ohm amplifier load Power Handling     600 Watts RMS 1200 Watts Max System Configuration     Vented Enclosure Material     5/8" MDF (Medium Density Fiberboard) Speaker Connector     Up to 10 AWG compression terminals Shipping Weight     56.9 Lbs. (25.8 kg) Dimensions      Dimensions     15.125" x 19.125" x 15.75" (38.4cm x 48.6cm x 40cm)

PUNCH serie enorm vermogen in een kleiner chassis ontwerpen. De beste waarde subwoofers in de car audio! Al langer als 25 jaar zijn de Punch subwoofers al een standaard in de car audio industrie van vandaag. Dit is dan ook een goede reden om ook voor de Punch subwoofer te kiezen. Elke Punch subwoofer geeft een sonische perfectie met een geweldige kracht in een compact behuizing! Rockford Fosgate P3-2X10 CEA-2031 Compliant     CEA-2031 Guidelines Woofer Quantity     2 Woofer Size     10" Woofer Series     Punch P3D4-10 Nominal Impedance (ea)     Dual 4-Ohm DVC Internally wired in parallel to create a 1-Ohm amplifier load Power Handling     1000 Watts RMS 2000 Watts Max System Configuration     Vented Enclosure Material     5/8" MDF (Medium Density Fiberboard) Speaker Connector     Up to 10 AWG compression terminals Shipping Weight     77 Lbs. (34.92 kg) Dimensions     13.125" x 31.125" x 15.125" (33.3cm x 79.1cm x 38.4cm)

PUNCH serie enorm vermogen in een kleiner chassis ontwerpen. De beste waarde subwoofers in de car audio! Al langer als 25 jaar zijn de Punch subwoofers al een standaard in de car audio industrie van vandaag. Dit is dan ook een goede reden om ook voor de Punch subwoofer te kiezen. Elke Punch subwoofer geeft een sonische perfectie met een geweldige kracht in een compact behuizing! Rockford Fosgate P3-2X12 CEA-2031 Compliant     CEA-2031 Guidelines Woofer Quantity     2 Woofer Size     12" Woofer Series     Punch P3D4-12 Nominal Impedance (ea)     Dual 4-Ohm DVC Internally wired in parallel to create a 1-Ohm amplifier load Power Handling     1200 Watts RMS 2400 Watts Max System Configuration     Vented Enclosure Material     5/8" MDF (Medium Density Fiberboard) Speaker Connector     Up to 10 AWG compression terminals Shipping Weight     89.65 Lbs. (40.66 kg) Dimensions      Dimensions     15.125" x 33.875" x 15.75" (38.4cm x 86cm x 40cm)

Rockford Fosgate Punch Speakers Wenn Sie ein erwachsenes Komponenten-System suchen oder einfach nur ein Paar Koaxe brauchen, um Ihre Werksanlage aufzurüsten, bieten die PUNCH Speakers das richtige für Ihr Gefährt. Insgesamt stehen fünfzehn Modelle zur Auswahl. Car Audio Enthusiasten werden die PUNCH Kompo-Systeme lieben, bieten diese mit dem flexiblen FlexFitTM Korbdesign die Möglichkeit, nahezu jede fahrzeugspezifische Lautsprecher-Öffnung zu bestücken. Die im Korb integrierte verstecke Weiche (ICC) macht den Einbau eines Weichengehäuses überflüssig. ENCLOSURES • Loaded with PUNCH R1 Subwoofers R1L-2X12 2 x 12” (30 cm) Sealed Subbox 300/600 Watts RMS/MAX., 2 Ohms Dimensions: 35, 6 x 85,7 x 31,1 cm