Akrapovic Porsche 911 Turbo/Turbo S (991) Decat Titanium Link Pipe Set De volgende stap van Akrapovic voor de Porsche 911 Turbo / Turbo S is de optionele titanium link pijpset zonder katten, perfect afgewerkt met een coating om meer duurzaamheid te bieden zonder het uiterlijk te veranderen. Ontworpen om de beste uitlaatstroom te creëren en een enorme gewichtsbesparing te bieden ten opzichte van standaardwanneer gebruikt in combinatie met de Slip-Onverhogen de verbindingspijpen het vermogen en geven de auto een sportief racegeluid. Om de afstemmingsmogelijkheden van deze geweldige auto te vergroten, zijn de link-pipes zonder katten een eenvoudig te installeren prestatie-upgrade. Bij het installeren van Akrapovic aftermarket optionele verbindingspijpen zonder katalysatoren, die alleen zijn ontwikkeld voor gebruik op gesloten circuits, is het opnieuw toewijzen van de ECU verplicht. DIT PRODUCT VOLDOET NIET AAN EMISSIE-VEREISTEN VOOR GEBRUIK OP STRAAT OF OP DE WEG. Fabrikant: AKRAPOVIC SKU: L-PO991T/2 Automerk: Porsche Type: 911 TURBO/TURBO S (991) Bouwjaar: 2014 – 2015

Akrapovic Porsche 911 Turbo/Turbo S (991) “Slip On” Titanium Exhaust System De Akrapovic Slip-On Line voor de Porsche 911 Turbo / Turbo S is de eerste stap in het afstellingsproces van de uitlaat en geeft deze toch al uitstekende auto een volgende stap in prestatie. Gemaakt van een hoogwaardige titaniumlegering en afgewerkt met prachtig handgemaakte koolstofvezel en titanium uitlaatpijpen, vermindert de Slip-On Line het gewicht om te helpen bij het hanteren. De geluidstechnici van Akrapovic hebben ook een diep en uniek geluid gecreëerd om de Porsche 911 Turbo / Turbo S nog meer te laten opvallen. De Slip-On Line kan ook worden gebruikt in combinatie met de optionele Akrapovic-verbindingspijpenmet of zonder kattendie aan het systeem kunnen worden toegevoegd om de prestaties naar een ander niveau te tillen. De Slip-On Line is prachtig afgewerkt met een coating voor meer duurzaamheid, zonder het uiterlijk of de prestaties van het systeem te veranderen. Fabrikant: AKRAPOVIC SKU: S-PO991TSO-HT Automerk: Porsche Type: 911 TURBO/TURBO S (991) Bouwjaar: 2014 – 2015

Akrapovic Renault Clio Mk3 Rs 200 – “Evolution” Link Pipe LET OP! Dit is enkel een link pipe set. Alleen te monteren met een Akrapovic Systeem ! Take the performance even further with adding an additional stainless steel link pipe with an integrated resonator to the Slip-On system. The impact on weight loss and performance versus the stock system of the Renault Clio R.S. is even more dramatic. There are real power delivery gains, and the engine, which is already primed for high-rev action, spins even more effectively, which in practical terms means that its noticeably more responsive. The sound is deeper, sportier, and louder, akin to racing in the Clio Cup, but without droning. The look of Clio R.S. with the Evolution system is completed with distinctive precision-crafted carbon fibre tailpipes. THIS PRODUCT DOES NOT MEET EMISSION COMPLIANCE REQUIREMENTS FOR STREET OR HIGHWAY USE. Fabrikant: AKRAPOVIC SKU: L-RECL3RS/1 Automerk: Renault Type: CLIO MK3 RS 200 – Bouwjaar: 2009 – 2012

Akrapovic Renault Clio Mk3 Rs 200 – “Slip On” Exhaust System The Clio R.S. is known as a real hot hatch among small cars. Akrapovic offers a Slip-On exhaust system in stainless steel with a two-muffler design and exquisitely designed and manufactured tailpipes. The Slip-On gives the Clio R.S. additional power and torque, and reduces the weight. The system also improves the driving characteristics at practically all rpms and gives the 2-liter engine that distinctive Akrapovic sound. In addition to the power gains resulting from weight reduction and a better power-to-weight ratio, leading to increased power, a Clio RS with an Akrapovic exhaust system can be distinguished even from afar thanks to its precision-crafted carbon fibre tailpipes. The Akrapovic Slip-On markedly improves the driving experience. Fabrikant: AKRAPOVIC SKU: MTP-RECL3RSH Automerk: Renault Type: CLIO MK3 RS 200 – Bouwjaar: 2009 – 2012

Akrapovic Renault Mégane Mk3 Coupé Rs – Titanium Exhaust System The Akrapovic Evolution Line performance exhaust system takes the performance of the Renault Mégane R.S. to even greater heights. The lower weight of the system over stock improves the cars handling, and together with the increase in power and torque makes this impressive hot hatch an even more thrilling experience. Beautifully crafted from titanium and finished with a unique carbon fibre tailpipe, the Evolution Line system will make the Mégane R.S. stand out from the crowd. When the high-revving engine lets out that distinctive deep and sporty Akrapovic sound, the whole package becomes one for all the senses to enjoy.THIS PRODUCT DOES NOT MEET EMISSION COMPLIANCE REQUIREMENTS FOR STREET OR HIGHWAY USE. Fabrikant: AKRAPOVIC SKU: S-RE/T/1 Automerk: Renault Type: MÉGANE MK3 COUPÉ RS – Bouwjaar: 2010 – 2016

Akrapovic Renault Mégane Mk4 Rs – “Evolution” Titanium Link Pipe Set  Evolution Link pipe set (Titanium) was tested and developed together with Slip-On Line (Titanium) system. The titanium Evolution link pipe set upgrades the Slip-On system to the Evolution system, that takes the performance of the Renault Mégane R.S. to even greater heights. The lower weight of the system over stock improves the cars handling, and together with the increase in power and torque makes this impressive hot hatch an even more thrilling experience. When the high-revving engine lets out that distinctive deep and sporty Akrapovic sound, the whole package becomes one for all the senses to enjoy. For installing the evolution link pipe set, the stock exhaust system has to be cut. Please read the instructions carefully before the start of the installation. For OPF: When installing the Akrapovic Evolution link pipe set, remapping the ECU is mandatory in order to prevent potential check engine light warning signals. THIS PRODUCT DOES NOT MEET EMISSION COMPLIANCE REQUIREMENTS FOR STREET OR HIGHWAY USE. Fabrikant: AKRAPOVIC SKU: L-RE/T/2 Automerk: RENAULT Type: MÉGANE MK4 RS – Bouwjaar: 2017 – –

Akrapovic Renault Mégane Mk4 Rs – “Slip On” Titanium Exhaust System   The Akrapovic Slip-On Line exhaust system is made from titanium with a distinctive precision-crafted carbon fibre tailpipe to give the Mégane R.S added appeal before its sporty engine kicks into life. Once the high-revving engine starts to spin, the Slip-On Line gives the Mégane R.S. increased sportiness and responsiveness with additional power and torque, and also reduces the weight to assist with overall handling. The system also gives the engine a deeper Akrapovic sound to further enhance the drivers enjoyment. ECE type approval is only valid for cars equipped with otto/gasoline particulate filter. For installing the slip-on system, the stock exhaust system has to be cut. Please read the instructions carefully before the start of the installation. Fitment notice: This system does not fit on Megane R.S. Line, Trophy and Trophy-R models. Fabrikant: AKRAPOVIC SKU: S-RE/T/4H Automerk: RENAULT Type: MÉGANE MK4 RS – Bouwjaar: 2017 – –

Akrapovic Toyota Gr Yaris – “Evolution” Link Pipe This exhaust is constructed with high-grade austenitic stainless steel and designed to be installed with the Akrapovic Slip-On Race Line (Titanium) exhaust system. The sound is further enhanced by a tuned resonator in the middle part of the link pipe, calculated to deliver a perfect sound experience, serving up a deep, rich, and sporty sound with no drone or streaming, to create a pure three-cylinder racing sound from the engine. It delivers power and torque increases of 13.5 kW (18.4 hp) at 5,900 rpm and 21.8 Nm at 5,900 rpm when using a combination of the Slip-On Race Line (Titanium) with an Evolution Link Pipe (SS) and tested on the Akrapovic dyno against a GR Yaris with a standard stock exhaust. Designed for racetracks and closed courses only and requiring mandatory remapping of the ECU, the link pipe weighs in at 19,6 % lighter than stock and removes the standard OPF/GPF. THIS PRODUCT DOES NOT MEET EMISSION COMPLIANCE REQUIREMENTS FOR STREET OR HIGHWAY USE.

Akrapovic Toyota Gr Yaris – “Slip On” Race Line Titanium Exhaust System  This exhaust is produced using race-proven, high-grade titanium for the entire system and features megaphone-shaped tailpipes. A collector centred between the rear resonators has been cast in the in-house foundry; this collector optimizes and balances the gas flow to produce an acoustically tuned sound with no drone. Three resonators two at the back of the collector and one in the middle pipe further tune the sound experience to create a sporty racing tone, fully enhancing the engines characteristics with a deep and enthusiastic sound, to give the occupants a feeling of exhilaration that is never interrupted by excess noise. The engineers have placed a special emphasis on the acoustics in the middle and high rev range, with a high-frequency tone at higher rpms and more sound at idle and revving. This sound is managed by two megaphone-shaped titanium tailpipes that are welded to the exhaust and specially coated to resist any colour changes at high temperatures. The shape of the tailpipes influences the sound. They are bigger than stock, measuring in at 110 mm, and have a similar profile to the Akrapovic exhaust for the Toyota GR Supra. Developed to decrease back pressure, the system weighs in at 7,8 kg, which is 37 % lighter than stock and yields power gains of 9.5 kW (12.9 hp) at 6,950 rpm and torque increases of 13.0 Nm at 6,950 rpm when tested on the Akrapovic dyno against a Toyota GR Yaris with a standard stock exhaust. This exhaust is designed for use on racetracks and closed courses only. It is necessary to cut the stock exhaust system when installing this product, but no ECU remapping is needed for this configuration. An optional Evolution link pipe is available for customers looking to extend the exhaust tuning possibilities for even better performance of the Akrapovic Slip-On Race Line (Titanium) system. THIS PRODUCT DOES NOT MEET EMISSION COMPLIANCE REQUIREMENTS FOR STREET OR HIGHWAY USE.

Akrapovic Toyota Supra (A90) & BMW M340i (G20/G21) M440I (G22, G23) Z4 M50i (G29) With Gpf – Downpipe met Racecat   Downpipe w Cat (SS) was tested and developed together with Evolution Line (Titanium) system. The high-flow downpipe is constructed using high-quality stainless steel and, once fitted to the Evolution Line exhaust, it creates a complete system from the manifold to the tailpipes that will further enhance the performance figures: both the torque and power outputs. It incorporates a sporty catalytic converter. This optional downpipe produces an enhanced sound that delivers a pure racing emotion and fantastic feedback at high revs, without unwanted drone, making it suitable for everyday use. When installing the Akrapovic downpipe, remapping the ECU is mandatory in order to prevent potential check engine light warning signals. Downpipe is optional product to the following evolution systems: Toyota Supra (A90) with OPF/GPF: Slip-On Line (Titanium) + Evolution Link pipe (SS) – S-TY/T/1H + E-TY/SS/2 BMW Z4 M40i (G29) with OPF/GPF: Slip-On Line (Titanium) + Evolution Link pipe (SS) – S-BM/T/9H + E-TY/SS/2 THIS PRODUCT DOES NOT MEET EMISSION COMPLIANCE REQUIREMENTS FOR STREET OR HIGHWAY USE. Fabrikant: AKRAPOVIC SKU: DP-TY/SS/2 Automerk: ToyotaType: SUPRA (A90) with GPF – Bouwjaar: 2019 – –

Akrapovic Toyota Supra (A90) BMW Z4 M40I (G29) met Gpf – “Evolution” Link Pipe Evolution Link Pipe Set (Titanium) was tested and developed together with the Slip-On or the Evolution Line (Titanium) system. The Evolution link pipe set upgrades the Slip-On system to the Evolution system. The Evolution link pipe set is constructed from high-quality austenitic stainless steel. It features an arrangement of two central link pipes for the best flow of the exhaust gases from the engine. It is designed to increase power and torque and reduce overall weight, while delivering a deep and sporty sound with no unwanted drone or streaming. When installing the Akrapovic Evolution link pipe set, remapping the ECU is mandatory in order to prevent potential check engine light warning signals. THIS PRODUCT DOES NOT MEET EMISSION COMPLIANCE REQUIREMENTS FOR STREET OR HIGHWAY USE. Fabrikant: AKRAPOVIC SKU: E-TY/SS/2 Automerk: Toyota Type: SUPRA (A90) with GPF – Bouwjaar: 2019 – –

Akrapovic Toyota Supra (A90) With Gpf – “Slip On” Titanium Exhaust System This ECE type-approved system is constructed entirely from high-grade titanium and features an exhaust valve with a housing cast in the in-house foundry. The single muffler arrangement has a unique set of titanium tailpipes, utilising a design not previously seen on an aftermarket exhaust. Fully adapted to the lines of the car, the outer side of the tailpipe has been coated for increased durability, while the inner surface has a bluish-purple natural titanium colour achieved by annealing, plus a stylish and sporty imprint design to give the system a very special and exclusive finish. Through the use of lightweight materials, the system will reduce overall vehicle weight, optimising power and torque through the entire rev range. Different sound modes offer a pleasant experience in comfort mode without any intrusive drone and, when the driving gets more dynamic and enthusiastic, the exhaust produces a vibrant and deep roar from the six-cylinder engine, which the Supra is well known for, and adds an exciting and exhilarating sensation as the revs rise. An optional Akrapovic Sound Kit is available to control the various sound settings, and optional tuning opportunities exist through the addition of the stainless-steel Evolution Link Pipe set. As with the Sound Kit, fitting the Link Pipe will negate the ECE type approval. Fitment and ECE type-approval are valid for engine type B58B30C. ECE type approval is only valid for cars equipped with otto/gasoline particulate filter.For installing the slip-on system, the stock exhaust system has to be cut. Please read the instructions carefully before the start of the installation. Fabrikant: AKRAPOVIC SKU: S-TY/T/1H Automerk: Toyota Type: SUPRA (A90) with GPF – Bouwjaar: 2019 – –

Akrapovič AUDI RS6 C8 Exhaust System Evolution Line (titanium) OPF/GPF 2020   Power+11.6 kW at 6150 rpm Torque+17.9 Nm at 6150 rpm Manufactured using high-grade lightweight titanium, the Evolution Line exhaust system features a specially designed layout with one central and two side mufflers and a collector made from titanium, all leading from stainless steel link pipes with a larger diameter compared to stock and custom-made flex tubes, fully insulated where they attach to the downpipes. A valve on each side muffler controls the flow of gases and aids the fantastic sound produced by the system. Each valve has a housing cast in Akrapovič’s in-house foundry, as does the complex active X-connection, which also features a valve for controlling the gas-flow from both sides of the engine. The system is finished with unique carbon fibre/titanium tailpipes – one on each side – with an eye-catching design that has never been used before, with the handmade dynamically shaped carbon fibre outer sleeve perfectly aligned with the sandblasted and coated titanium inner, all giving a powerful and sporty conclusion to this stunning exhaust system. Designed to supply a soundtrack that has been acoustically tuned to perfection at every rev point to give an aural delight from the low-down rumble, through a strong mid-range and onto a high frequency top end with distinctive feel of Akrapovič’s racing heritage, all added to the increased excitement where every downshift is accompanied a sharp rumble. The system has been tuned to provide the occupants the comfort of driving like an everyday commuter with no unwanted drone or excessive noise. Akrapovič has conducted tests on its in-house dyno with the Evolution Line (Titanium) exhaust system, using an Audi RS 6 Avant (C8) with the stock Audi Sport exhaust system for comparison, and a power gain of 15.7 hp (m) at 6150 rpm and a torque increase of 17.9 Nm at 6150 rpm were achieved under controlled conditions and with a weight saving of over 30% against the stock system. This is an ECE compliant system that is a serious performer in all areas. Further changes can be made with the addition of the optional Downpipe / Link pipe set (SS), increased exhaust tuning, and the optional Akrapovič Sound Kit to control the valves in the exhaust and give greater flexibility in the sound the exhaust produces. To give the Evolution Line (Titanium) an even greater visual impact, a handmade carbon fibre diffuser in matte or glossy is available as an option to provide that special finish. The Link pipe set (SS) L-AU/SS/6 is a mandatory product to the Evolution Line (Titanium) S-AU/TI/15H. The system is split into two codes because of packaging requirements. If the Evolution Line exhaust system is combined with the Downpipe / Link pipe set (SS), the link pipe set L-AU/SS/6 is not needed. In this case, the ECE type approval is not valid anymore, and remapping the ECU is mandatory when it is fitted. With the installation of Akrapovič Sound Kit, ECE type approval for the Evolution Line (Titanium) exhaust system is not valid.   ECE type approval is only valid for cars equipped with otto/gasoline particulate filter.

Akrapovič AUDI RS6 C8 Exhaust System Evolution Line (titanium) OPF/GPF 2020   Power+11.6 kW at 6150 rpm Torque+17.9 Nm at 6150 rpm Manufactured using high-grade lightweight titanium, the Evolution Line exhaust system features a specially designed layout with one central and two side mufflers and a collector made from titanium, all leading from stainless steel link pipes with a larger diameter compared to stock and custom-made flex tubes, fully insulated where they attach to the downpipes. A valve on each side muffler controls the flow of gases and aids the fantastic sound produced by the system. Each valve has a housing cast in Akrapovič’s in-house foundry, as does the complex active X-connection, which also features a valve for controlling the gas-flow from both sides of the engine. The system is finished with unique carbon fibre/titanium tailpipes – one on each side – with an eye-catching design that has never been used before, with the handmade dynamically shaped carbon fibre outer sleeve perfectly aligned with the sandblasted and coated titanium inner, all giving a powerful and sporty conclusion to this stunning exhaust system. Designed to supply a soundtrack that has been acoustically tuned to perfection at every rev point to give an aural delight from the low-down rumble, through a strong mid-range and onto a high frequency top end with distinctive feel of Akrapovič’s racing heritage, all added to the increased excitement where every downshift is accompanied a sharp rumble. The system has been tuned to provide the occupants the comfort of driving like an everyday commuter with no unwanted drone or excessive noise. Akrapovič has conducted tests on its in-house dyno with the Evolution Line (Titanium) exhaust system, using an Audi RS 6 Avant (C8) with the stock Audi Sport exhaust system for comparison, and a power gain of 15.7 hp (m) at 6150 rpm and a torque increase of 17.9 Nm at 6150 rpm were achieved under controlled conditions and with a weight saving of over 30% against the stock system. This is an ECE compliant system that is a serious performer in all areas. Further changes can be made with the addition of the optional Downpipe / Link pipe set (SS), increased exhaust tuning, and the optional Akrapovič Sound Kit to control the valves in the exhaust and give greater flexibility in the sound the exhaust produces. To give the Evolution Line (Titanium) an even greater visual impact, a handmade carbon fibre diffuser in matte or glossy is available as an option to provide that special finish. The Link pipe set (SS) L-AU/SS/6 is a mandatory product to the Evolution Line (Titanium) S-AU/TI/15H. The system is split into two codes because of packaging requirements. If the Evolution Line exhaust system is combined with the Downpipe / Link pipe set (SS), the link pipe set L-AU/SS/6 is not needed. In this case, the ECE type approval is not valid anymore, and remapping the ECU is mandatory when it is fitted. With the installation of Akrapovič Sound Kit, ECE type approval for the Evolution Line (Titanium) exhaust system is not valid.   ECE type approval is only valid for cars equipped with otto/gasoline particulate filter.

Akrapovič AUDI RS6 C8 Exhaust System Evolution Line (titanium) OPF/GPF 2020   Power+11.6 kW at 6150 rpm Torque+17.9 Nm at 6150 rpm Manufactured using high-grade lightweight titanium, the Evolution Line exhaust system features a specially designed layout with one central and two side mufflers and a collector made from titanium, all leading from stainless steel link pipes with a larger diameter compared to stock and custom-made flex tubes, fully insulated where they attach to the downpipes. A valve on each side muffler controls the flow of gases and aids the fantastic sound produced by the system. Each valve has a housing cast in Akrapovič’s in-house foundry, as does the complex active X-connection, which also features a valve for controlling the gas-flow from both sides of the engine. The system is finished with unique carbon fibre/titanium tailpipes – one on each side – with an eye-catching design that has never been used before, with the handmade dynamically shaped carbon fibre outer sleeve perfectly aligned with the sandblasted and coated titanium inner, all giving a powerful and sporty conclusion to this stunning exhaust system. Designed to supply a soundtrack that has been acoustically tuned to perfection at every rev point to give an aural delight from the low-down rumble, through a strong mid-range and onto a high frequency top end with distinctive feel of Akrapovič’s racing heritage, all added to the increased excitement where every downshift is accompanied a sharp rumble. The system has been tuned to provide the occupants the comfort of driving like an everyday commuter with no unwanted drone or excessive noise. Akrapovič has conducted tests on its in-house dyno with the Evolution Line (Titanium) exhaust system, using an Audi RS 6 Avant (C8) with the stock Audi Sport exhaust system for comparison, and a power gain of 15.7 hp (m) at 6150 rpm and a torque increase of 17.9 Nm at 6150 rpm were achieved under controlled conditions and with a weight saving of over 30% against the stock system. This is an ECE compliant system that is a serious performer in all areas. Further changes can be made with the addition of the optional Downpipe / Link pipe set (SS), increased exhaust tuning, and the optional Akrapovič Sound Kit to control the valves in the exhaust and give greater flexibility in the sound the exhaust produces. To give the Evolution Line (Titanium) an even greater visual impact, a handmade carbon fibre diffuser in matte or glossy is available as an option to provide that special finish. The Link pipe set (SS) L-AU/SS/6 is a mandatory product to the Evolution Line (Titanium) S-AU/TI/15H. The system is split into two codes because of packaging requirements. If the Evolution Line exhaust system is combined with the Downpipe / Link pipe set (SS), the link pipe set L-AU/SS/6 is not needed. In this case, the ECE type approval is not valid anymore, and remapping the ECU is mandatory when it is fitted. With the installation of Akrapovič Sound Kit, ECE type approval for the Evolution Line (Titanium) exhaust system is not valid.   ECE type approval is only valid for cars equipped with otto/gasoline particulate filter.

Akrapovič AUDI RS6 C8 Exhaust System Evolution Line (titanium) OPF/GPF 2020   Power+11.6 kW at 6150 rpm Torque+17.9 Nm at 6150 rpm Manufactured using high-grade lightweight titanium, the Evolution Line exhaust system features a specially designed layout with one central and two side mufflers and a collector made from titanium, all leading from stainless steel link pipes with a larger diameter compared to stock and custom-made flex tubes, fully insulated where they attach to the downpipes. A valve on each side muffler controls the flow of gases and aids the fantastic sound produced by the system. Each valve has a housing cast in Akrapovič’s in-house foundry, as does the complex active X-connection, which also features a valve for controlling the gas-flow from both sides of the engine. The system is finished with unique carbon fibre/titanium tailpipes – one on each side – with an eye-catching design that has never been used before, with the handmade dynamically shaped carbon fibre outer sleeve perfectly aligned with the sandblasted and coated titanium inner, all giving a powerful and sporty conclusion to this stunning exhaust system. Designed to supply a soundtrack that has been acoustically tuned to perfection at every rev point to give an aural delight from the low-down rumble, through a strong mid-range and onto a high frequency top end with distinctive feel of Akrapovič’s racing heritage, all added to the increased excitement where every downshift is accompanied a sharp rumble. The system has been tuned to provide the occupants the comfort of driving like an everyday commuter with no unwanted drone or excessive noise. Akrapovič has conducted tests on its in-house dyno with the Evolution Line (Titanium) exhaust system, using an Audi RS 6 Avant (C8) with the stock Audi Sport exhaust system for comparison, and a power gain of 15.7 hp (m) at 6150 rpm and a torque increase of 17.9 Nm at 6150 rpm were achieved under controlled conditions and with a weight saving of over 30% against the stock system. This is an ECE compliant system that is a serious performer in all areas. Further changes can be made with the addition of the optional Downpipe / Link pipe set (SS), increased exhaust tuning, and the optional Akrapovič Sound Kit to control the valves in the exhaust and give greater flexibility in the sound the exhaust produces. To give the Evolution Line (Titanium) an even greater visual impact, a handmade carbon fibre diffuser in matte or glossy is available as an option to provide that special finish. The Link pipe set (SS) L-AU/SS/6 is a mandatory product to the Evolution Line (Titanium) S-AU/TI/15H. The system is split into two codes because of packaging requirements. If the Evolution Line exhaust system is combined with the Downpipe / Link pipe set (SS), the link pipe set L-AU/SS/6 is not needed. In this case, the ECE type approval is not valid anymore, and remapping the ECU is mandatory when it is fitted. With the installation of Akrapovič Sound Kit, ECE type approval for the Evolution Line (Titanium) exhaust system is not valid.   ECE type approval is only valid for cars equipped with otto/gasoline particulate filter.

Akrapovič AUDI RS6 C8 Exhaust System Evolution Line (titanium) OPF/GPF 2020   Power+11.6 kW at 6150 rpm Torque+17.9 Nm at 6150 rpm Manufactured using high-grade lightweight titanium, the Evolution Line exhaust system features a specially designed layout with one central and two side mufflers and a collector made from titanium, all leading from stainless steel link pipes with a larger diameter compared to stock and custom-made flex tubes, fully insulated where they attach to the downpipes. A valve on each side muffler controls the flow of gases and aids the fantastic sound produced by the system. Each valve has a housing cast in Akrapovič’s in-house foundry, as does the complex active X-connection, which also features a valve for controlling the gas-flow from both sides of the engine. The system is finished with unique carbon fibre/titanium tailpipes – one on each side – with an eye-catching design that has never been used before, with the handmade dynamically shaped carbon fibre outer sleeve perfectly aligned with the sandblasted and coated titanium inner, all giving a powerful and sporty conclusion to this stunning exhaust system. Designed to supply a soundtrack that has been acoustically tuned to perfection at every rev point to give an aural delight from the low-down rumble, through a strong mid-range and onto a high frequency top end with distinctive feel of Akrapovič’s racing heritage, all added to the increased excitement where every downshift is accompanied a sharp rumble. The system has been tuned to provide the occupants the comfort of driving like an everyday commuter with no unwanted drone or excessive noise. Akrapovič has conducted tests on its in-house dyno with the Evolution Line (Titanium) exhaust system, using an Audi RS 6 Avant (C8) with the stock Audi Sport exhaust system for comparison, and a power gain of 15.7 hp (m) at 6150 rpm and a torque increase of 17.9 Nm at 6150 rpm were achieved under controlled conditions and with a weight saving of over 30% against the stock system. This is an ECE compliant system that is a serious performer in all areas. Further changes can be made with the addition of the optional Downpipe / Link pipe set (SS), increased exhaust tuning, and the optional Akrapovič Sound Kit to control the valves in the exhaust and give greater flexibility in the sound the exhaust produces. To give the Evolution Line (Titanium) an even greater visual impact, a handmade carbon fibre diffuser in matte or glossy is available as an option to provide that special finish. The Link pipe set (SS) L-AU/SS/6 is a mandatory product to the Evolution Line (Titanium) S-AU/TI/15H. The system is split into two codes because of packaging requirements. If the Evolution Line exhaust system is combined with the Downpipe / Link pipe set (SS), the link pipe set L-AU/SS/6 is not needed. In this case, the ECE type approval is not valid anymore, and remapping the ECU is mandatory when it is fitted. With the installation of Akrapovič Sound Kit, ECE type approval for the Evolution Line (Titanium) exhaust system is not valid.   ECE type approval is only valid for cars equipped with otto/gasoline particulate filter.

Akrapovič AUDI RS6 C8 Exhaust System Evolution Line (titanium) OPF/GPF 2020   Power+11.6 kW at 6150 rpm Torque+17.9 Nm at 6150 rpm Manufactured using high-grade lightweight titanium, the Evolution Line exhaust system features a specially designed layout with one central and two side mufflers and a collector made from titanium, all leading from stainless steel link pipes with a larger diameter compared to stock and custom-made flex tubes, fully insulated where they attach to the downpipes. A valve on each side muffler controls the flow of gases and aids the fantastic sound produced by the system. Each valve has a housing cast in Akrapovič’s in-house foundry, as does the complex active X-connection, which also features a valve for controlling the gas-flow from both sides of the engine. The system is finished with unique carbon fibre/titanium tailpipes – one on each side – with an eye-catching design that has never been used before, with the handmade dynamically shaped carbon fibre outer sleeve perfectly aligned with the sandblasted and coated titanium inner, all giving a powerful and sporty conclusion to this stunning exhaust system. Designed to supply a soundtrack that has been acoustically tuned to perfection at every rev point to give an aural delight from the low-down rumble, through a strong mid-range and onto a high frequency top end with distinctive feel of Akrapovič’s racing heritage, all added to the increased excitement where every downshift is accompanied a sharp rumble. The system has been tuned to provide the occupants the comfort of driving like an everyday commuter with no unwanted drone or excessive noise. Akrapovič has conducted tests on its in-house dyno with the Evolution Line (Titanium) exhaust system, using an Audi RS 6 Avant (C8) with the stock Audi Sport exhaust system for comparison, and a power gain of 15.7 hp (m) at 6150 rpm and a torque increase of 17.9 Nm at 6150 rpm were achieved under controlled conditions and with a weight saving of over 30% against the stock system. This is an ECE compliant system that is a serious performer in all areas. Further changes can be made with the addition of the optional Downpipe / Link pipe set (SS), increased exhaust tuning, and the optional Akrapovič Sound Kit to control the valves in the exhaust and give greater flexibility in the sound the exhaust produces. To give the Evolution Line (Titanium) an even greater visual impact, a handmade carbon fibre diffuser in matte or glossy is available as an option to provide that special finish. The Link pipe set (SS) L-AU/SS/6 is a mandatory product to the Evolution Line (Titanium) S-AU/TI/15H. The system is split into two codes because of packaging requirements. If the Evolution Line exhaust system is combined with the Downpipe / Link pipe set (SS), the link pipe set L-AU/SS/6 is not needed. In this case, the ECE type approval is not valid anymore, and remapping the ECU is mandatory when it is fitted. With the installation of Akrapovič Sound Kit, ECE type approval for the Evolution Line (Titanium) exhaust system is not valid.   ECE type approval is only valid for cars equipped with otto/gasoline particulate filter.

Akrapovič AUDI RS6 C8 Exhaust System Evolution Line (titanium) OPF/GPF 2020   Power+11.6 kW at 6150 rpm Torque+17.9 Nm at 6150 rpm Manufactured using high-grade lightweight titanium, the Evolution Line exhaust system features a specially designed layout with one central and two side mufflers and a collector made from titanium, all leading from stainless steel link pipes with a larger diameter compared to stock and custom-made flex tubes, fully insulated where they attach to the downpipes. A valve on each side muffler controls the flow of gases and aids the fantastic sound produced by the system. Each valve has a housing cast in Akrapovič’s in-house foundry, as does the complex active X-connection, which also features a valve for controlling the gas-flow from both sides of the engine. The system is finished with unique carbon fibre/titanium tailpipes – one on each side – with an eye-catching design that has never been used before, with the handmade dynamically shaped carbon fibre outer sleeve perfectly aligned with the sandblasted and coated titanium inner, all giving a powerful and sporty conclusion to this stunning exhaust system. Designed to supply a soundtrack that has been acoustically tuned to perfection at every rev point to give an aural delight from the low-down rumble, through a strong mid-range and onto a high frequency top end with distinctive feel of Akrapovič’s racing heritage, all added to the increased excitement where every downshift is accompanied a sharp rumble. The system has been tuned to provide the occupants the comfort of driving like an everyday commuter with no unwanted drone or excessive noise. Akrapovič has conducted tests on its in-house dyno with the Evolution Line (Titanium) exhaust system, using an Audi RS 6 Avant (C8) with the stock Audi Sport exhaust system for comparison, and a power gain of 15.7 hp (m) at 6150 rpm and a torque increase of 17.9 Nm at 6150 rpm were achieved under controlled conditions and with a weight saving of over 30% against the stock system. This is an ECE compliant system that is a serious performer in all areas. Further changes can be made with the addition of the optional Downpipe / Link pipe set (SS), increased exhaust tuning, and the optional Akrapovič Sound Kit to control the valves in the exhaust and give greater flexibility in the sound the exhaust produces. To give the Evolution Line (Titanium) an even greater visual impact, a handmade carbon fibre diffuser in matte or glossy is available as an option to provide that special finish. The Link pipe set (SS) L-AU/SS/6 is a mandatory product to the Evolution Line (Titanium) S-AU/TI/15H. The system is split into two codes because of packaging requirements. If the Evolution Line exhaust system is combined with the Downpipe / Link pipe set (SS), the link pipe set L-AU/SS/6 is not needed. In this case, the ECE type approval is not valid anymore, and remapping the ECU is mandatory when it is fitted. With the installation of Akrapovič Sound Kit, ECE type approval for the Evolution Line (Titanium) exhaust system is not valid.   ECE type approval is only valid for cars equipped with otto/gasoline particulate filter.

Akrapovič AUDI RS6 C8 Exhaust System Evolution Line (titanium) OPF/GPF 2020   Power+11.6 kW at 6150 rpm Torque+17.9 Nm at 6150 rpm Manufactured using high-grade lightweight titanium, the Evolution Line exhaust system features a specially designed layout with one central and two side mufflers and a collector made from titanium, all leading from stainless steel link pipes with a larger diameter compared to stock and custom-made flex tubes, fully insulated where they attach to the downpipes. A valve on each side muffler controls the flow of gases and aids the fantastic sound produced by the system. Each valve has a housing cast in Akrapovič’s in-house foundry, as does the complex active X-connection, which also features a valve for controlling the gas-flow from both sides of the engine. The system is finished with unique carbon fibre/titanium tailpipes – one on each side – with an eye-catching design that has never been used before, with the handmade dynamically shaped carbon fibre outer sleeve perfectly aligned with the sandblasted and coated titanium inner, all giving a powerful and sporty conclusion to this stunning exhaust system. Designed to supply a soundtrack that has been acoustically tuned to perfection at every rev point to give an aural delight from the low-down rumble, through a strong mid-range and onto a high frequency top end with distinctive feel of Akrapovič’s racing heritage, all added to the increased excitement where every downshift is accompanied a sharp rumble. The system has been tuned to provide the occupants the comfort of driving like an everyday commuter with no unwanted drone or excessive noise. Akrapovič has conducted tests on its in-house dyno with the Evolution Line (Titanium) exhaust system, using an Audi RS 6 Avant (C8) with the stock Audi Sport exhaust system for comparison, and a power gain of 15.7 hp (m) at 6150 rpm and a torque increase of 17.9 Nm at 6150 rpm were achieved under controlled conditions and with a weight saving of over 30% against the stock system. This is an ECE compliant system that is a serious performer in all areas. Further changes can be made with the addition of the optional Downpipe / Link pipe set (SS), increased exhaust tuning, and the optional Akrapovič Sound Kit to control the valves in the exhaust and give greater flexibility in the sound the exhaust produces. To give the Evolution Line (Titanium) an even greater visual impact, a handmade carbon fibre diffuser in matte or glossy is available as an option to provide that special finish. The Link pipe set (SS) L-AU/SS/6 is a mandatory product to the Evolution Line (Titanium) S-AU/TI/15H. The system is split into two codes because of packaging requirements. If the Evolution Line exhaust system is combined with the Downpipe / Link pipe set (SS), the link pipe set L-AU/SS/6 is not needed. In this case, the ECE type approval is not valid anymore, and remapping the ECU is mandatory when it is fitted. With the installation of Akrapovič Sound Kit, ECE type approval for the Evolution Line (Titanium) exhaust system is not valid.   ECE type approval is only valid for cars equipped with otto/gasoline particulate filter.

Alfa GTV Typ 916 system Uitgang rechts/links - 2x76 Typ 10 rechts/links Passend voor: Buisdiameter: Opmerkingen: Merk: FOX Levertijd: 1 tot 14 dagen

Alfa GTV Typ 916 system Uitgang rechts/links - 2x76 Typ 18 rechts/links Passend voor: Buisdiameter: Opmerkingen: Merk: FOX Levertijd: 1 tot 14 dagen

Alfa Mito 1.4 Tjet Actuator FORGE GRAND PUNTO 1.4 Tjet TURBO ACTUATOR Type: Alfa Model: Mito 1.4 Tjet Modification: Actuator Description: GRAND PUNTO 1.4 Tjet TURBO ACTUATOR Hose Colour: N/A Merk: FORGE MOTORSPORT

Alfa Mito 1.4 Tjet Dump valve FORGE GRAND PUNTO 1.4 Tjet TURBO DUMP VALVE Type: Alfa Model: Mito 1.4 Tjet Modification: Dump valve Description: GRAND PUNTO 1.4 Tjet TURBO DUMP VALVE Hose Colour: N/A Merk: FORGE MOTORSPORT

Alfa Mito 1.4 Tjet FORGE COOLANT HOSE KIT FOR FIAT GRAND PUNTO 1.4 TJET Type: Alfa Model: Mito 1.4 Tjet Modification: Description: COOLANT HOSE KIT FOR FIAT GRAND PUNTO 1.4 TJET Hose Colour: Black/Blue/Red Merk: FORGE MOTORSPORT

Alfa Mito 1.4 Tjet FORGE HEADER TANK FOR FIAT GRAND PUNTO 1.4 Tjet / 1.9 Mjet Type: Alfa Model: Mito 1.4 Tjet Modification: Description: HEADER TANK FOR FIAT GRAND PUNTO 1.4 Tjet / 1.9 Mjet Hose Colour: N/A Merk: FORGE MOTORSPORT

Alfa Mito 1.4 Tjet FORGE INTERCOOLER OUTLET HOSES GRAND PUNTO 1.4 TJET Type: Alfa Model: Mito 1.4 Tjet Modification: Description: INTERCOOLER OUTLET HOSES GRAND PUNTO 1.4 TJET Hose Colour: Black/Blue/Red Merk: FORGE MOTORSPORT

Alfa Mito 1.4 Tjet FORGE TURBO HOSE KIT FOR FIAT GRAND PUNTO 1.4 TJET Type: Alfa Model: Mito 1.4 Tjet Modification: Description: TURBO HOSE KIT FOR FIAT GRAND PUNTO 1.4 TJET Hose Colour: Black/Blue/Red Merk: FORGE MOTORSPORT