In this category you will find wheel spacers and adapters. By increasing the track width, not only the appearance is improved, but you also achieve an improved road holding in combination with a higher stability, because the role of the chassis is influenced in a positive way. If you install track spacers the car looks wider and better, while the wheel fills the wheelhouse.
In our assortment we have track wideners of the top brands: H&R, Eibach and SCC.
In addition to wheel spacers, we also have wheel adapters from H&R in our range. These adapters are in addition to spacers intended to make wheels with different sizes of wheel bolts or the number of bolts still fit.
If you can not find certain parts in our webshop, ask one of our employees.
H&R DR-System Wheelspacers 11mm 5x114,3 - Hub 66,0mm - Bolt size M12x1,5 - Alpine/Renault/Dacia/Mercedes - Black
H&R DR-System Wheel spacers:- 11mm per spacer - 22mm per axle - Bolt pattern 5x114,3 - Hub 66,0mm - Bolt size M12x1,5 - Alpine/Renault/Dacia/Mercedes - Black H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted between the wheel and the axial hub using longer bolt snot supplied (please order separately). When ordering the longer bolts please state which cone type you require and the required extra length. All screws for the DR Systems have to be ordered separately. Remark: Not usable with steel rims
H&R DR-System Wheelspacers 11mm 5x127 - Hub 75,0mm - Bolt size M14x1,5 - Aston Martin
H&R DR-System Wheel spacers:- 11mm per spacer - 22mm per axle - Bolt pattern 5x127 - Hub 75,0mm - Bolt size M14x1,5 - Aston Martin H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted between the wheel and the axial hub using longer wheel bolts (please order separately). When ordering the longer bolts please state which cone type you require and the required extra length. All screws for the DR Systems have to be ordered separately. Remark: Not usable with steel rims
H&R DR-System Wheelspacers 11mm 5x127 - Hub 75,0mm - Bolt size M14x1,5 - Aston Martin - Black
H&R DR-System Wheel spacers:- 11mm per spacer - 22mm per axle - Bolt pattern 5x127 - Hub 75,0mm - Bolt size M14x1,5 - Aston Martin - Black H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted between the wheel and the axial hub using longer wheel bolts (please order separately). When ordering the longer bolts please state which cone type you require and the required extra length. All screws for the DR Systems have to be ordered separately. Remark: Not usable with steel rims
H&R DR-System Wheelspacers 12mm 4x100 - Hub 56,6mm - Bolt size M12x1,5 - Opel
H&R DR-System Wheel spacers:- 12mm per spacer - 24mm per axle - Bolt pattern 4x100 - Hub 56,6mm - Bolt size M12x1,5 - Opel H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted between the wheel and the axial hub using longer wheel bolts (please order separately). When ordering the longer bolts please state which cone type you require and the required extra length. All screws for the DR Systems have to be ordered separately. Remark: Not usable with steel rims Only installation on the front axle (ask for more detailed info)
H&R DR-System Wheelspacers 12mm 4x108 - Hub 65,0mm - Bolt size M12x1,25 - Citroën/Peugeot/Volvo/Opel
H&R DR-System Wheel spacers:- 12mm per spacer - 24mm per axle - Bolt pattern 4x108 - Hub 65,0mm - Bolt size M12x1,25 - Citroën/Peugeot/Volvo/Opel H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted between the wheel and the axial hub using longer wheel bolts (please order separately). When ordering the longer bolts please state which cone type you require and the required extra length. All screws for the DR Systems have to be ordered separately. Bolt size M12x1,75 Volvo S70/V70 Type L (4-hole-wheels)
H&R DR-System Wheelspacers 12mm 4x98 - Hub 58,0mm - Bolt size M12x1,25 - Alfa/Fiat/Ford/Lancia
H&R DR-System Wheel spacers:- 12mm per spacer - 24mm per axle - Bolt pattern 4x98 - Hub 58,0mm - Bolt size M12x1,25 - Alfa/Fiat/Ford/Lancia H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted between the wheel and the axial hub using longer wheel bolts (please order separately). When ordering the longer bolts please state which cone type you require and the required extra length. All screws for the DR Systems have to be ordered separately.
H&R DR-System Wheelspacers 12mm 4x98 - Hub 58,0mm - Bolt size M12x1,25 - Fiat
H&R DR-System Wheel spacers:- 12mm per spacer - 24mm per axle - Bolt pattern 4x98 - Hub 58,0mm - Bolt size M12x1,25 - Fiat H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted between the wheel and the axial hub using longer wheel bolts (please order separately). When ordering the longer bolts please state which cone type you require and the required extra length. All screws for the DR Systems have to be ordered separately.
H&R DR-System Wheelspacers 12mm 5x100 - Hub 57,1mm - Version A - Bolt size M14x1,5 - Audi/Seat/Skoda/Volkswagen
H&R DR-System Wheel spacers:- 12mm per spacer - 24mm per axle - Bolt pattern 5x100 - Hub 57,1mm - Version A - Bolt size M14x1,5 - Audi/Seat/Skoda/Volkswagen H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted between the wheel and the axial hub using longer bolt snot supplied (please order separately). When ordering the longer bolts please state which cone type you require and the required extra length. All screws for the DR Systems have to be ordered separately. Remark: Not usable with steel rims Only for rim with inner bavel mind. 7 x 45 Wheel hub length at the car max. 17mm
H&R DR-System Wheelspacers 12mm 5x100 - Hub 57,1mm - Version A - Bolt size M14x1,5 - Audi/Seat/Skoda/Volkswagen - Black
H&R DR-System Wheel spacers:- 12mm per spacer - 24mm per axle - Bolt pattern 5x100 - Hub 57,1mm - Version A - Bolt size M14x1,5 - Audi/Seat/Skoda/Volkswagen - Black H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted between the wheel and the axial hub using longer bolt snot supplied (please order separately). When ordering the longer bolts please state which cone type you require and the required extra length. All screws for the DR Systems have to be ordered separately. Remark: Not usable with steel rims Only for rim with inner bavel mind. 7 x 45 Wheel hub length at the car max. 17mm
H&R DR-System Wheelspacers 12mm 5x100 - Hub 57,1mm - Version B - Bolt size M14x1,5 - Audi/Seat/Skoda/Volkswagen
H&R DR-System Wheel spacers:- 12mm per spacer - 24mm per axle - Bolt pattern 5x100 - Hub 57,1mm - Version B - Bolt size M14x1,5 - Audi/Seat/Skoda/Volkswagen H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted between the wheel and the axial hub using longer bolt snot supplied (please order separately). When ordering the longer bolts please state which cone type you require and the required extra length. All screws for the DR Systems have to be ordered separately. Remark: Not usable with steel rims Only for rim with inner bavel mind. 5 x 45 Wheel hub length at the car max. 14,5mm
H&R DR-System Wheelspacers 12mm 5x100 - Hub 57,1mm - Version B - Bolt size M14x1,5 - Audi/Seat/Skoda/Volkswagen - Black
H&R DR-System Wheel spacers:- 12mm per spacer - 24mm per axle - Bolt pattern 5x100 - Hub 57,1mm - Version B - Bolt size M14x1,5 - Audi/Seat/Skoda/Volkswagen - Black H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted between the wheel and the axial hub using longer bolt snot supplied (please order separately). When ordering the longer bolts please state which cone type you require and the required extra length. All screws for the DR Systems have to be ordered separately. Remark: Not usable with steel rims Only for rim with inner bavel mind. 5 x 45 Wheel hub length at the car max. 14,5mm
H&R DR-System Wheelspacers 12mm 5x108 - Hub 58,0mm - Bolt size M12x1,25 - Alfa/Citroën/Fiat/Lancia/Peugeot
H&R DR-System Wheel spacers:- 12mm per spacer - 24mm per axle - Bolt pattern 5x108 - Hub 58,0mm - Bolt size M12x1,25 - Alfa/Citroën/Fiat/Lancia/Peugeot H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted between the wheel and the axial hub using longer wheel bolts (please order separately). When ordering the longer bolts please state which cone type you require and the required extra length. All screws for the DR Systems have to be ordered separately.
H&R DR-System Wheelspacers 12mm 5x108 - Hub 65,0mm - Bolt size M12x1,25 - Citroën/Opel/Peugeot/Volvo
H&R DR-System Wheel spacers:- 12mm per spacer - 24mm per axle - Bolt pattern 5x108 - Hub 65,0mm - Bolt size M12x1,25 - Citroën/Opel/Peugeot/Volvo H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted between the wheel and the axial hub using longer wheel bolts (please order separately). When ordering the longer bolts please state which cone type you require and the required extra length. All screws for the DR Systems have to be ordered separately.
H&R DR-System Wheelspacers 12mm 5x110 - Hub 65,0mm - Bolt size M14x1,5 - Alfa/Opel/Maserati
H&R DR-System Wheel spacers:- 12mm per spacer - 24mm per axle - Bolt pattern 5x110 - Hub 65,0mm - Bolt size M14x1,5 - Alfa/Opel/Maserati H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted between the wheel and the axial hub using longer bolt snot supplied (please order separately). When ordering the longer bolts please state which cone type you require and the required extra length. All screws for the DR Systems have to be ordered separately. Remark: Not usable with steel rims
H&R DR-System Wheelspacers 12mm 5x112 - Hub 57,1mm - Bolt size M14x1,5 - Audi/Seat/Skoda/Volkswagen/Ford
H&R DR-System Wheel spacers:- 12mm per spacer - 24mm per axle - Bolt pattern 5x112 - Hub 57,1mm - Bolt size M14x1,5 - Audi/Seat/Skoda/Volkswagen/Ford H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted between the wheel and the axial hub using longer bolt snot supplied (please order separately). When ordering the longer bolts please state which cone type you require and the required extra length. All screws for the DR Systems have to be ordered separately. Not applicable with steel rims: Audi A3/S3/TT/TTS Type 8V/8J (8S from 2014) Only for rims with inner bavel mind. 5x45° Audi RS3 Type 8P Audi RS3/TT RS Type 8V/8J1 Audi Q3/RS Q3 Type 8U/8U1 Seat Ateca Type 5FP Seat Leon Type 5F 9 (Only for rim with inner bavel mind. 5x45°) Skoda Superb Type 3T (from model 2015, only for rims with inner bavel mind. 5x45°) Skoda Octavia Type 5E (Only for rims with inner bavel mind. 5x45°) Skoda Karoq Type NU Volkswagen Passat 3C (from model 2015, only for rims with inner bavel mind. 5x45°) Volkswagen Golf VII Type AU/AUV (Only for rims with inner bavel mind. 5x45°) Volkswagen Passat Alltrack Type 3C (model 2012-2014) Volkswagen Beetle Type 16 only for front axle: Audi R8 Type 42 (from model 2016) H&R DR-System Wheel spacers:- 12mm per spacer - 24mm per axle - Bolt pattern 5x112 - Hub 57,1mm - Bolt size M14x1,5 - Audi/Seat/Skoda/Volkswagen H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted between the wheel and the axial hub using longer bolt snot supplied (please order separately). When ordering the longer bolts please state which cone type you require and the required extra length. All screws for the DR Systems have to be ordered separately. Not applicable with steel rims: Audi A3/S3/TT/TTS Type 8V/8J (8S from 2014) Only for rims with inner bavel mind. 5x45° Audi RS3 Type 8P Audi RS3/TT RS Type 8V/8J1 Audi Q3/RS Q3 Type 8U/8U1 Seat Ateca Type 5FP Seat Leon Type 5F 9 (Only for rim with inner bavel mind. 5x45°) Skoda Superb Type 3T (from model 2015, only for rims with inner bavel mind. 5x45°) Skoda Octavia Type 5E (Only for rims with inner bavel mind. 5x45°) Skoda Karoq Type NU Volkswagen Passat 3C (from model 2015, only for rims with inner bavel mind. 5x45°) Volkswagen Golf VII Type AU/AUV (Only for rims with inner bavel mind. 5x45°) Volkswagen Passat Alltrack Type 3C (model 2012-2014) Volkswagen Beetle Type 16 only for front axle: Audi R8 Type 42 (from model 2016)
H&R DR-System Wheelspacers 12mm 5x112 - Hub 57,1mm - Bolt size M14x1,5 - Audi/Seat/Skoda/Volkswagen/Ford - Black
H&R DR-System Wheel spacers:- 12mm per spacer - 24mm per axle - Bolt pattern 5x112 - Hub 57,1mm - Bolt size M14x1,5 - Audi/Seat/Skoda/Volkswagen/Ford - Black H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted between the wheel and the axial hub using longer bolt snot supplied (please order separately). When ordering the longer bolts please state which cone type you require and the required extra length. All screws for the DR Systems have to be ordered separately. Not applicable with steel rims: Audi A3/S3/TT/TTS Type 8V/8J (8S from 2014) Only for rims with inner bavel mind. 5x45° Audi RS3 Type 8P Audi RS3/TT RS Type 8V/8J1 Audi Q3/RS Q3 Type 8U/8U1 Seat Ateca Type 5FP Seat Leon Type 5F 9 (Only for rim with inner bavel mind. 5x45°) Skoda Superb Type 3T (from model 2015, only for rims with inner bavel mind. 5x45°) Skoda Octavia Type 5E (Only for rims with inner bavel mind. 5x45°) Skoda Karoq Type NU Volkswagen Passat 3C (from model 2015, only for rims with inner bavel mind. 5x45°) Volkswagen Golf VII Type AU/AUV (Only for rims with inner bavel mind. 5x45°) Volkswagen Passat Alltrack Type 3C (model 2012-2014) Volkswagen Beetle Type 16 only for front axle: Audi R8 Type 42 (from model 2016) H&R DR-System Wheel spacers:- 12mm per spacer - 24mm per axle - Bolt pattern 5x112 - Hub 57,1mm - Bolt size M14x1,5 - Audi/Seat/Skoda/Volkswagen - Black H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted between the wheel and the axial hub using longer bolt snot supplied (please order separately). When ordering the longer bolts please state which cone type you require and the required extra length. All screws for the DR Systems have to be ordered separately. Not applicable with steel rims: Audi A3/S3/TT/TTS Type 8V/8J (8S from 2014) Only for rims with inner bavel mind. 5x45° Audi RS3 Type 8P Audi RS3/TT RS Type 8V/8J1 Audi Q3/RS Q3 Type 8U/8U1 Seat Ateca Type 5FP Seat Leon Type 5F 9 (Only for rim with inner bavel mind. 5x45°) Skoda Superb Type 3T (from model 2015, only for rims with inner bavel mind. 5x45°) Skoda Octavia Type 5E (Only for rims with inner bavel mind. 5x45°) Skoda Karoq Type NU Volkswagen Passat 3C (from model 2015, only for rims with inner bavel mind. 5x45°) Volkswagen Golf VII Type AU/AUV (Only for rims with inner bavel mind. 5x45°) Volkswagen Passat Alltrack Type 3C (model 2012-2014) Volkswagen Beetle Type 16 only for front axle: Audi R8 Type 42 (from model 2016)
H&R DR-System Wheelspacers 12mm 5x112 - Hub 57,1mm - Bolt size M14x1,5 - Seat/Skoda/Volkswagen/Audi/Cupra
H&R DR-System Wheel spacers:- 12mm per spacer - 24mm per axle - Bolt pattern 5x112 - Hub 57,1mm - Bolt size M14x1,5 - Seat/Skoda/Volkswagen/Audi/Cupra H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted between the wheel and the axial hub using longer bolt snot supplied (please order separately). When ordering the longer bolts please state which cone type you require and the required extra length. All screws for the DR Systems have to be ordered separately. Remark: Not usable with steel rims
H&R DR-System Wheelspacers 12mm 5x112 - Hub 57,1mm - Bolt size M14x1,5 - Seat/Skoda/Volkswagen/Audi/Cupra - Black
H&R DR-System Wheel spacers:- 12mm per spacer - 24mm per axle - Bolt pattern 5x112 - Hub 57,1mm - Bolt size M14x1,5 - Seat/Skoda/Volkswagen/Audi/Cupra - Black H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted between the wheel and the axial hub using longer bolt snot supplied (please order separately). When ordering the longer bolts please state which cone type you require and the required extra length. All screws for the DR Systems have to be ordered separately. Remark: Not usable with steel rims
H&R DR-System Wheelspacers 12mm 5x112 - Hub 66,5mm - Bolt size M14x1,25 - BMW/Toyota/Mini
H&R DR-System Wheel spacers:- 12mm per spacer - 24mm per axle - Bolt pattern 5x112 - Hub 66,5mm - Bolt size M14x1,25 - BMW/Toyota/Mini H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted between the wheel and the axial hub using longer wheel bolts (please order separately). When ordering the longer bolts please state which cone type you require and the required extra length. All screws for the DR Systems have to be ordered separately. Remark: Not usable with steel rims
H&R DR-System Wheelspacers 12mm 5x112 - Hub 66,5mm - Bolt size M14x1,25 - BMW/Toyota/Mini - Black
H&R DR-System Wheel spacers:- 12mm per spacer - 24mm per axle - Bolt pattern 5x112 - Hub 66,5mm - Bolt size M14x1,25 - BMW/Toyota/Mini - Black H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted between the wheel and the axial hub using longer wheel bolts (please order separately). When ordering the longer bolts please state which cone type you require and the required extra length. All screws for the DR Systems have to be ordered separately. Remark: Not usable with steel rims
H&R DR-System Wheelspacers 12mm 5x112 - Hub 66,5mm - Bolt size M14x1,5 - Audi/Porsche/Volkswagen
H&R DR-System Wheel spacers:- 12mm per spacer - 24mm per axle - Bolt pattern 5x112 - Hub 66,5mm - Bolt size M14x1,5 - Audi/Porsche/Volkswagen H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted between the wheel and the axial hub using longer bolt snot supplied (please order separately). When ordering the longer bolts please state which cone type you require and the required extra length. All screws for the DR Systems have to be ordered separately. Remark: Not usable with steel rims
H&R DR-System Wheelspacers 12mm 5x112 - Hub 66,5mm - Bolt size M14x1,5 - Audi/Porsche/Volkswagen - Black
H&R DR-System Wheel spacers:- 12mm per spacer - 24mm per axle - Bolt pattern 5x112 - Hub 66,5mm - Bolt size M14x1,5 - Audi/Porsche/Volkswagen - Black H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted between the wheel and the axial hub using longer bolt snot supplied (please order separately). When ordering the longer bolts please state which cone type you require and the required extra length. All screws for the DR Systems have to be ordered separately. Remark: Not usable with steel rims
H&R DR-System Wheelspacers 12mm 5x112 - Hub 66,5mm - Bolt size M14x1,5 - Mercedes
H&R DR-System Wheel spacers:- 12mm per spacer - 24mm per axle - Bolt pattern 5x112 - Hub 66,5mm - Bolt size M14x1,5 - Mercedes H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted between the wheel and the axial hub using longer wheel bolts (please order separately). When ordering the longer bolts please state which cone type you require and the required extra length. All screws for the DR Systems have to be ordered separately. Remark: Only installation on the front axle (ask for more detailed info)
H&R DR-System Wheelspacers 12mm 5x112 - Hub 66,5mm - Bolt size M14x1,5 - Mercedes - Black
H&R DR-System Wheel spacers:- 12mm per spacer - 24mm per axle - Bolt pattern 5x112 - Hub 66,5mm - Bolt size M14x1,5 - Mercedes - Black H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted between the wheel and the axial hub using longer wheel bolts (please order separately). When ordering the longer bolts please state which cone type you require and the required extra length. All screws for the DR Systems have to be ordered separately. Remark: Only installation on the front axle (ask for more detailed info)
H&R DR-System Wheelspacers 12mm 5x114,3 - Hub 60,1mm - Bolt size M12x1,5 - Suzuki
H&R DR-System Wheel spacers:- 12mm per spacer - 24mm per axle - Bolt pattern 5x114,3 - Hub 60,1mm - Bolt size M12x1,5 - Suzuki H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted between the wheel and the axial hub using longer wheel bolts (please order separately). When ordering the longer bolts please state which cone type you require and the required extra length. All screws for the DR Systems have to be ordered separately. Remark: Not usable with steel rims
H&R DR-System Wheelspacers 12mm 5x114,3 - Hub 67,0mm - Bolt size M14x1,5 - Maserati
H&R DR-System Wheel spacers:- 12mm per spacer - 24mm per axle - Bolt pattern 5x114,3 - Hub 67,0mm - Bolt size M14x1,5 - Maserati H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted between the wheel and the axial hub using longer wheel bolts (please order separately). When ordering the longer bolts please state which cone type you require and the required extra length. All screws for the DR Systems have to be ordered separately.
H&R DR-System Wheelspacers 12mm 5x114,3 - Hub 67,0mm - Bolt size M14x1,5 - Maserati - Black
H&R DR-System Wheel spacers:- 12mm per spacer - 24mm per axle - Bolt pattern 5x114,3 - Hub 67,0mm - Bolt size M14x1,5 - Maserati - Black H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted between the wheel and the axial hub using longer wheel bolts (please order separately). When ordering the longer bolts please state which cone type you require and the required extra length. All screws for the DR Systems have to be ordered separately.
H&R DR-System Wheelspacers 12mm 5x120 - Hub 65,0mm - Bolt size M14x1,5 - Volkswagen
H&R DR-System Wheel spacers:- 12mm per spacer - 24mm per axle - Bolt pattern 5x120 - Hub 65,0mm - Bolt size M14x1,5 - Volkswagen H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted between the wheel and the axial hub using longer bolt snot supplied (please order separately). When ordering the longer bolts please state which cone type you require and the required extra length. All screws for the DR Systems have to be ordered separately.
H&R DR-System Wheelspacers 12mm 5x120 - Hub 65,0mm - Bolt size M14x1,5 - Volkswagen - Black
H&R DR-System Wheel spacers:- 12mm per spacer - 24mm per axle - Bolt pattern 5x120 - Hub 65,0mm - Bolt size M14x1,5 - Volkswagen - Black H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted between the wheel and the axial hub using longer bolt snot supplied (please order separately). When ordering the longer bolts please state which cone type you require and the required extra length. All screws for the DR Systems have to be ordered separately.
H&R DR-System Wheelspacers 12mm 5x120 - Hub 72,5mm - Bolt size M14x1,25 - BMW/Mini
H&R DR-System Wheel spacers:- 12mm per spacer - 24mm per axle - Bolt pattern 5x120 - Hub 72,5mm - Bolt size M14x1,25 - BMW/Mini H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted between the wheel and the axial hub using longer wheel bolts (please order separately). When ordering the longer bolts please state which cone type you require and the required extra length. All screws for the DR Systems have to be ordered separately. Remark: Not usable with steel rims
H&R DR-System Wheelspacers 12mm 5x120 - Hub 72,5mm - Bolt size M14x1,25 - BMW/Mini - Black
H&R DR-System Wheel spacers:- 12mm per spacer - 24mm per axle - Bolt pattern 5x120 - Hub 72,5mm - Bolt size M14x1,25 - BMW/Mini - Black H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted between the wheel and the axial hub using longer wheel bolts (please order separately). When ordering the longer bolts please state which cone type you require and the required extra length. All screws for the DR Systems have to be ordered separately. Remark: Not usable with steel rims
H&R DR-System Wheelspacers 12mm 5x120 - Hub 74,0mm - Bolt size M12x1,5 - BMW
H&R DR-System Wheel spacers:- 12mm per spacer - 24mm per axle - Bolt pattern 5x120 - Hub 74,0mm - Bolt size M12x1,5 - BMW H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted between the wheel and the axial hub using longer wheel bolts (please order separately). When ordering the longer bolts please state which cone type you require and the required extra length. All screws for the DR Systems have to be ordered separately. Remark: Not usable with steel rims
H&R DR-System Wheelspacers 12mm 5x120 - Hub 74,0mm - Bolt size M12x1,5 - BMW - Black
H&R DR-System Wheel spacers:- 12mm per spacer - 24mm per axle - Bolt pattern 5x120 - Hub 74,0mm - Bolt size M12x1,5 - BMW - Black H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted between the wheel and the axial hub using longer wheel bolts (please order separately). When ordering the longer bolts please state which cone type you require and the required extra length. All screws for the DR Systems have to be ordered separately. Remark: Not usable with steel rims
H&R DR-System Wheelspacers 12mm 5x120 - Hub 74,0mm - Bolt size M14x1,25 - BMW
H&R DR-System Wheel spacers:- 12mm per spacer - 24mm per axle - Bolt pattern 5x120 - Hub 74;0mm - Bolt size M14x1,25 - BMW H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength; lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted between the wheel and the axial hub using longer wheel bolts (please order separately). When ordering the longer bolts please state which cone type you require and the required extra length. All screws for the DR Systems have to be ordered separately. Remark: Not usable with steel rims Only installation on the rear axle (ask for more detailed info)
H&R DR-System Wheelspacers 12mm 5x120 - Hub 74,0mm - Bolt size M14x1,25 - BMW - Black
H&R DR-System Wheel spacers:- 12mm per spacer - 24mm per axle - Bolt pattern 5x120 - Hub 74;0mm - Bolt size M14x1,25 - BMW - Black H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength; lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted between the wheel and the axial hub using longer wheel bolts (please order separately). When ordering the longer bolts please state which cone type you require and the required extra length. All screws for the DR Systems have to be ordered separately. Remark: Not usable with steel rims Only installation on the rear axle (ask for more detailed info)
H&R DR-System Wheelspacers 12mm 5x127 - Hub 71,6mm - Bolt size M14x1,5 - Jeep
H&R DR-System Wheel spacers:- 12mm per spacer - 24mm per axle - Bolt pattern 5x127 - Hub 71,6mm - Bolt size M14x1,5 - Jeep H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted between the wheel and the axial hub using longer wheel bolts (please order separately). When ordering the longer bolts please state which cone type you require and the required extra length. All screws for the DR Systems have to be ordered separately. Remark: Not usable with steel rims