Real 3D Carbon Rear bumper protector BMW 3 Touring (G21) Facelift 2022- 'Ribs'
Real 3D Carbon Rear bumper protector BMW 3 Touring (G21) Facelift 2022- 'Ribs'Provide optimum protection against wear and tear on the top of the rear bumper. This part of the vehicle is highly susceptible to damage from goods being loaded and unloaded. The cost of repairing and repainting is high, and the value of your car can drop.A rear bumper protector prevents damage to the top of your rear bumper. These are precisely tailored to your car type, and moulds to the bumper of your car, resulting in a perfect fit.Material:These Avisa protection strips are made of real Carbonfiber, which in addition to good protection also gives a sporty look to your car. Due to its material properties, Carbon fiber is very lightweight and also has good resistance to material fatigue; it is very resistant to pressure and continuous use. In addition, the durable material has been properly refined and protected against UV radiation and do not undergo discoloration. This means that the cover will last for years in its original shape.With over 30 years of experience, Avisa is a leader in the design and production of these protectors. They are available in different colours and styles.Mounting:These protection frames are very easy to assemble. They are attached with double-sided 3M tape, which does not damage the original paint. This is included in the package, as are full schematic mounting instructions. The installation takes about 10 minutes.
Real 3D Carbon Rear bumper protector BMW 3-Series G20 Sedan M-Package 2019-
Real 3D Carbon Rear bumper protector BMW 3-Series G20 Sedan M-Package 2019-Provide optimum protection against wear and tear on the top of the rear bumper. This part of the vehicle is highly susceptible to damage from goods being loaded and unloaded. The cost of repairing and repainting is high, and the value of your car can drop.A rear bumper protector prevents damage to the top of your rear bumper. These are precisely tailored to your car type, and moulds to the bumper of your car, resulting in a perfect fit.Material:These Avisa protection strips are made of real Carbonfiber, which in addition to good protection also gives a sporty look to your car. Due to its material properties, Carbon fiber is very lightweight and also has good resistance to material fatigue; it is very resistant to pressure and continuous use. In addition, the durable material has been properly refined and protected against UV radiation and do not undergo discoloration. This means that the cover will last for years in its original shape.With over 30 years of experience, Avisa is a leader in the design and production of these protectors. They are available in different colours and styles.Mounting:These protection frames are very easy to assemble. They are attached with double-sided 3M tape, which does not damage the original paint. This is included in the package, as are full schematic mounting instructions. The installation takes about 10 minutes.
Real 3D Carbon Rear bumper protector BMW 5-Series F11 Touring 2010-2016 'Ribs'
Real 3D Carbon Rear bumper protector BMW 5-Series F11 Touring 2010-2016 'Ribs'Provide optimum protection against wear and tear on the top of the rear bumper. This part of the vehicle is highly susceptible to damage from goods being loaded and unloaded. The cost of repairing and repainting is high, and the value of your car can drop.A rear bumper protector prevents damage to the top of your rear bumper. These are precisely tailored to your car type, and moulds to the bumper of your car, resulting in a perfect fit.Material:These Avisa protection strips are made of real Carbonfiber, which in addition to good protection also gives a sporty look to your car. Due to its material properties, Carbon fiber is very lightweight and also has good resistance to material fatigue; it is very resistant to pressure and continuous use. In addition, the durable material has been properly refined and protected against UV radiation and do not undergo discoloration. This means that the cover will last for years in its original shape.With over 30 years of experience, Avisa is a leader in the design and production of these protectors. They are available in different colours and styles.Mounting:These protection frames are very easy to assemble. They are attached with double-sided 3M tape, which does not damage the original paint. This is included in the package, as are full schematic mounting instructions. The installation takes about 10 minutes.
Real 3D Carbon Rear bumper protector BMW 5-Series Touring G31 FL 2020-2024 'Ribs'
Real 3D Carbon Rear bumper protector BMW 5-Series Touring G31 FL 2020-2024 'Ribs'Provide optimum protection against wear and tear on the top of the rear bumper. This part of the vehicle is highly susceptible to damage from goods being loaded and unloaded. The cost of repairing and repainting is high, and the value of your car can drop.A rear bumper protector prevents damage to the top of your rear bumper. These are precisely tailored to your car type, and moulds to the bumper of your car, resulting in a perfect fit.Material:These Avisa protection strips are made of real Carbonfiber, which in addition to good protection also gives a sporty look to your car. Due to its material properties, Carbon fiber is very lightweight and also has good resistance to material fatigue; it is very resistant to pressure and continuous use. In addition, the durable material has been properly refined and protected against UV radiation and do not undergo discoloration. This means that the cover will last for years in its original shape.With over 30 years of experience, Avisa is a leader in the design and production of these protectors. They are available in different colours and styles.Mounting:These protection frames are very easy to assemble. They are attached with double-sided 3M tape, which does not damage the original paint. This is included in the package, as are full schematic mounting instructions. The installation takes about 10 minutes.
Real 3D Carbon Rear bumper protector BMW 6-Series Gran Turismo G32 2017- 'Ribs'
Real 3D Carbon Rear bumper protector BMW 6-Series Gran Turismo G32 2017- 'Ribs'Provide optimum protection against wear and tear on the top of the rear bumper. This part of the vehicle is highly susceptible to damage from goods being loaded and unloaded. The cost of repairing and repainting is high, and the value of your car can drop.A rear bumper protector prevents damage to the top of your rear bumper. These are precisely tailored to your car type, and moulds to the bumper of your car, resulting in a perfect fit.Material:These Avisa protection strips are made of real Carbonfiber, which in addition to good protection also gives a sporty look to your car. Due to its material properties, Carbon fiber is very lightweight and also has good resistance to material fatigue; it is very resistant to pressure and continuous use. In addition, the durable material has been properly refined and protected against UV radiation and do not undergo discoloration. This means that the cover will last for years in its original shape.With over 30 years of experience, Avisa is a leader in the design and production of these protectors. They are available in different colours and styles.Mounting:These protection frames are very easy to assemble. They are attached with double-sided 3M tape, which does not damage the original paint. This is included in the package, as are full schematic mounting instructions. The installation takes about 10 minutes.
Real 3D Carbon Rear bumper protector BMW 7-Series G70 Sedan M-Package 2023-
Real 3D Carbon Rear bumper protector BMW 7-Series G70 Sedan M-Package 2023-Provide optimum protection against wear and tear on the top of the rear bumper. This part of the vehicle is highly susceptible to damage from goods being loaded and unloaded. The cost of repairing and repainting is high, and the value of your car can drop.A rear bumper protector prevents damage to the top of your rear bumper. These are precisely tailored to your car type, and moulds to the bumper of your car, resulting in a perfect fit.Material:These Avisa protection strips are made of real Carbonfiber, which in addition to good protection also gives a sporty look to your car. Due to its material properties, Carbon fiber is very lightweight and also has good resistance to material fatigue; it is very resistant to pressure and continuous use. In addition, the durable material has been properly refined and protected against UV radiation and do not undergo discoloration. This means that the cover will last for years in its original shape.With over 30 years of experience, Avisa is a leader in the design and production of these protectors. They are available in different colours and styles.Mounting:These protection frames are very easy to assemble. They are attached with double-sided 3M tape, which does not damage the original paint. This is included in the package, as are full schematic mounting instructions. The installation takes about 10 minutes.
Real 3D Carbon Rear bumper protector BMW iX (I20) 2021- 'Ribs'
Real 3D Carbon Rear bumper protector BMW iX (I20) 2021- 'Ribs'Provide optimum protection against wear and tear on the top of the rear bumper. This part of the vehicle is highly susceptible to damage from goods being loaded and unloaded. The cost of repairing and repainting is high, and the value of your car can drop.A rear bumper protector prevents damage to the top of your rear bumper. These are precisely tailored to your car type, and moulds to the bumper of your car, resulting in a perfect fit.Material:These Avisa protection strips are made of real Carbonfiber, which in addition to good protection also gives a sporty look to your car. Due to its material properties, Carbon fiber is very lightweight and also has good resistance to material fatigue; it is very resistant to pressure and continuous use. In addition, the durable material has been properly refined and protected against UV radiation and do not undergo discoloration. This means that the cover will last for years in its original shape.With over 30 years of experience, Avisa is a leader in the design and production of these protectors. They are available in different colours and styles.Mounting:These protection frames are very easy to assemble. They are attached with double-sided 3M tape, which does not damage the original paint. This is included in the package, as are full schematic mounting instructions. The installation takes about 10 minutes.
Real 3D Carbon Rear bumper protector BMW iX3 (G08) 2020- 'Ribs'
Real 3D Carbon Rear bumper protector BMW iX3 (G08) 2020- 'Ribs'Provide optimum protection against wear and tear on the top of the rear bumper. This part of the vehicle is highly susceptible to damage from goods being loaded and unloaded. The cost of repairing and repainting is high, and the value of your car can drop.A rear bumper protector prevents damage to the top of your rear bumper. These are precisely tailored to your car type, and moulds to the bumper of your car, resulting in a perfect fit.Material:These Avisa protection strips are made of real Carbonfiber, which in addition to good protection also gives a sporty look to your car. Due to its material properties, Carbon fiber is very lightweight and also has good resistance to material fatigue; it is very resistant to pressure and continuous use. In addition, the durable material has been properly refined and protected against UV radiation and do not undergo discoloration. This means that the cover will last for years in its original shape.With over 30 years of experience, Avisa is a leader in the design and production of these protectors. They are available in different colours and styles.Mounting:These protection frames are very easy to assemble. They are attached with double-sided 3M tape, which does not damage the original paint. This is included in the package, as are full schematic mounting instructions. The installation takes about 10 minutes.
Real 3D Carbon Rear bumper protector BMW X1 (F48) 2015-2022
Real 3D Carbon Rear bumper protector BMW X1 (F48) 2015-2022Provide optimum protection against wear and tear on the top of the rear bumper. This part of the vehicle is highly susceptible to damage from goods being loaded and unloaded. The cost of repairing and repainting is high, and the value of your car can drop.A rear bumper protector prevents damage to the top of your rear bumper. These are precisely tailored to your car type, and moulds to the bumper of your car, resulting in a perfect fit.Material:These Avisa protection strips are made of real Carbonfiber, which in addition to good protection also gives a sporty look to your car. Due to its material properties, Carbon fiber is very lightweight and also has good resistance to material fatigue; it is very resistant to pressure and continuous use. In addition, the durable material has been properly refined and protected against UV radiation and do not undergo discoloration. This means that the cover will last for years in its original shape.With over 30 years of experience, Avisa is a leader in the design and production of these protectors. They are available in different colours and styles.Mounting:These protection frames are very easy to assemble. They are attached with double-sided 3M tape, which does not damage the original paint. This is included in the package, as are full schematic mounting instructions. The installation takes about 10 minutes.
Real 3D Carbon Rear bumper protector BMW X1 U11 / U11 xLine 2022- 'Ribs'
Real 3D Carbon Rear bumper protector BMW X1 U11 / U11 xLine 2022- 'Ribs'Provide optimum protection against wear and tear on the top of the rear bumper. This part of the vehicle is highly susceptible to damage from goods being loaded and unloaded. The cost of repairing and repainting is high, and the value of your car can drop.A rear bumper protector prevents damage to the top of your rear bumper. These are precisely tailored to your car type, and moulds to the bumper of your car, resulting in a perfect fit.Material:These Avisa protection strips are made of real Carbonfiber, which in addition to good protection also gives a sporty look to your car. Due to its material properties, Carbon fiber is very lightweight and also has good resistance to material fatigue; it is very resistant to pressure and continuous use. In addition, the durable material has been properly refined and protected against UV radiation and do not undergo discoloration. This means that the cover will last for years in its original shape.With over 30 years of experience, Avisa is a leader in the design and production of these protectors. They are available in different colours and styles.Mounting:These protection frames are very easy to assemble. They are attached with double-sided 3M tape, which does not damage the original paint. This is included in the package, as are full schematic mounting instructions. The installation takes about 10 minutes.
Real 3D Carbon Rear bumper protector BMW X1 with M-Package (U11) 2022- 'Ribs'
Real 3D Carbon Rear bumper protector BMW X1 with M-Package (U11) 2022- 'Ribs'Provide optimum protection against wear and tear on the top of the rear bumper. This part of the vehicle is highly susceptible to damage from goods being loaded and unloaded. The cost of repairing and repainting is high, and the value of your car can drop.A rear bumper protector prevents damage to the top of your rear bumper. These are precisely tailored to your car type, and moulds to the bumper of your car, resulting in a perfect fit.Material:These Avisa protection strips are made of real Carbonfiber, which in addition to good protection also gives a sporty look to your car. Due to its material properties, Carbon fiber is very lightweight and also has good resistance to material fatigue; it is very resistant to pressure and continuous use. In addition, the durable material has been properly refined and protected against UV radiation and do not undergo discoloration. This means that the cover will last for years in its original shape.With over 30 years of experience, Avisa is a leader in the design and production of these protectors. They are available in different colours and styles.Mounting:These protection frames are very easy to assemble. They are attached with double-sided 3M tape, which does not damage the original paint. This is included in the package, as are full schematic mounting instructions. The installation takes about 10 minutes.
Real 3D Carbon Rear bumper protector BMW X2 F39 M-Package 2018-2023
Real 3D Carbon Rear bumper protector BMW X2 F39 M-Package 2018-2023Provide optimum protection against wear and tear on the top of the rear bumper. This part of the vehicle is highly susceptible to damage from goods being loaded and unloaded. The cost of repairing and repainting is high, and the value of your car can drop.A rear bumper protector prevents damage to the top of your rear bumper. These are precisely tailored to your car type, and moulds to the bumper of your car, resulting in a perfect fit.Material:These Avisa protection strips are made of real Carbonfiber, which in addition to good protection also gives a sporty look to your car. Due to its material properties, Carbon fiber is very lightweight and also has good resistance to material fatigue; it is very resistant to pressure and continuous use. In addition, the durable material has been properly refined and protected against UV radiation and do not undergo discoloration. This means that the cover will last for years in its original shape.With over 30 years of experience, Avisa is a leader in the design and production of these protectors. They are available in different colours and styles.Mounting:These protection frames are very easy to assemble. They are attached with double-sided 3M tape, which does not damage the original paint. This is included in the package, as are full schematic mounting instructions. The installation takes about 10 minutes.
Real 3D Carbon Rear bumper protector BMW X3 (G01) 2017-2021 & Facelift 2021- excl. M-Package 'Ribs'
Real 3D Carbon Rear bumper protector BMW X3 (G01) 2017-2021 & Facelift 2021- excl. M-Package 'Ribs'Provide optimum protection against wear and tear on the top of the rear bumper. This part of the vehicle is highly susceptible to damage from goods being loaded and unloaded. The cost of repairing and repainting is high, and the value of your car can drop.A rear bumper protector prevents damage to the top of your rear bumper. These are precisely tailored to your car type, and moulds to the bumper of your car, resulting in a perfect fit.Material:These Avisa protection strips are made of real Carbonfiber, which in addition to good protection also gives a sporty look to your car. Due to its material properties, Carbon fiber is very lightweight and also has good resistance to material fatigue; it is very resistant to pressure and continuous use. In addition, the durable material has been properly refined and protected against UV radiation and do not undergo discoloration. This means that the cover will last for years in its original shape.With over 30 years of experience, Avisa is a leader in the design and production of these protectors. They are available in different colours and styles.Mounting:These protection frames are very easy to assemble. They are attached with double-sided 3M tape, which does not damage the original paint. This is included in the package, as are full schematic mounting instructions. The installation takes about 10 minutes.
Real 3D Carbon Rear bumper protector BMW X4 (G02) 2018-
Real 3D Carbon Rear bumper protector BMW X4 (G02) 2018-Provide optimum protection against wear and tear on the top of the rear bumper. This part of the vehicle is highly susceptible to damage from goods being loaded and unloaded. The cost of repairing and repainting is high, and the value of your car can drop.A rear bumper protector prevents damage to the top of your rear bumper. These are precisely tailored to your car type, and moulds to the bumper of your car, resulting in a perfect fit.Material:These Avisa protection strips are made of real Carbonfiber, which in addition to good protection also gives a sporty look to your car. Due to its material properties, Carbon fiber is very lightweight and also has good resistance to material fatigue; it is very resistant to pressure and continuous use. In addition, the durable material has been properly refined and protected against UV radiation and do not undergo discoloration. This means that the cover will last for years in its original shape.With over 30 years of experience, Avisa is a leader in the design and production of these protectors. They are available in different colours and styles.Mounting:These protection frames are very easy to assemble. They are attached with double-sided 3M tape, which does not damage the original paint. This is included in the package, as are full schematic mounting instructions. The installation takes about 10 minutes.
Real 3D Carbon Rear bumper protector BMW X4 F26 2014-2018 'Ribs'
Real 3D Carbon Rear bumper protector BMW X4 F26 2014-2018Provide optimum protection against wear and tear on the top of the rear bumper. This part of the vehicle is highly susceptible to damage from goods being loaded and unloaded. The cost of repairing and repainting is high, and the value of your car can drop.A rear bumper protector prevents damage to the top of your rear bumper. These are precisely tailored to your car type, and moulds to the bumper of your car, resulting in a perfect fit.Material:These Avisa protection strips are made of real Carbonfiber, which in addition to good protection also gives a sporty look to your car. Due to its material properties, Carbon fiber is very lightweight and also has good resistance to material fatigue; it is very resistant to pressure and continuous use. In addition, the durable material has been properly refined and protected against UV radiation and do not undergo discoloration. This means that the cover will last for years in its original shape.With over 30 years of experience, Avisa is a leader in the design and production of these protectors. They are available in different colours and styles.Mounting:These protection frames are very easy to assemble. They are attached with double-sided 3M tape, which does not damage the original paint. This is included in the package, as are full schematic mounting instructions. The installation takes about 10 minutes.
Real 3D Carbon Rear bumper protector BMW X5 (G05) M-Package 2018- excl. M-Competition 'Ribs'
Real 3D Carbon Rear bumper protector BMW X5 (G05) M-Package 2018- excl. M-Competition 'Ribs'Provide optimum protection against wear and tear on the top of the rear bumper. This part of the vehicle is highly susceptible to damage from goods being loaded and unloaded. The cost of repairing and repainting is high, and the value of your car can drop.A rear bumper protector prevents damage to the top of your rear bumper. These are precisely tailored to your car type, and moulds to the bumper of your car, resulting in a perfect fit.Material:These Avisa protection strips are made of real Carbonfiber, which in addition to good protection also gives a sporty look to your car. Due to its material properties, Carbon fiber is very lightweight and also has good resistance to material fatigue; it is very resistant to pressure and continuous use. In addition, the durable material has been properly refined and protected against UV radiation and do not undergo discoloration. This means that the cover will last for years in its original shape.With over 30 years of experience, Avisa is a leader in the design and production of these protectors. They are available in different colours and styles.Mounting:These protection frames are very easy to assemble. They are attached with double-sided 3M tape, which does not damage the original paint. This is included in the package, as are full schematic mounting instructions. The installation takes about 10 minutes.
Real 3D Carbon Rear bumper protector BMW X5 F15 2013-2018 with M-Package 'Ribs'
Real 3D Carbon Rear bumper protector BMW X5 F15 2013-2018 with M-Package 'Ribs'Provide optimum protection against wear and tear on the top of the rear bumper. This part of the vehicle is highly susceptible to damage from goods being loaded and unloaded. The cost of repairing and repainting is high, and the value of your car can drop.A rear bumper protector prevents damage to the top of your rear bumper. These are precisely tailored to your car type, and moulds to the bumper of your car, resulting in a perfect fit.Material:These Avisa protection strips are made of real Carbonfiber, which in addition to good protection also gives a sporty look to your car. Due to its material properties, Carbon fiber is very lightweight and also has good resistance to material fatigue; it is very resistant to pressure and continuous use. In addition, the durable material has been properly refined and protected against UV radiation and do not undergo discoloration. This means that the cover will last for years in its original shape.With over 30 years of experience, Avisa is a leader in the design and production of these protectors. They are available in different colours and styles.Mounting:These protection frames are very easy to assemble. They are attached with double-sided 3M tape, which does not damage the original paint. This is included in the package, as are full schematic mounting instructions. The installation takes about 10 minutes.
Real 3D Carbon Rear bumper protector BMW X7 (G07) 2019- with M-Sport package 'Ribs'
Real 3D Carbon Rear bumper protector BMW X7 (G07) 2019- with M-Sport package 'Ribs'Provide optimum protection against wear and tear on the top of the rear bumper. This part of the vehicle is highly susceptible to damage from goods being loaded and unloaded. The cost of repairing and repainting is high, and the value of your car can drop.A rear bumper protector prevents damage to the top of your rear bumper. These are precisely tailored to your car type, and moulds to the bumper of your car, resulting in a perfect fit.Material:These Avisa protection strips are made of real Carbonfiber, which in addition to good protection also gives a sporty look to your car. Due to its material properties, Carbon fiber is very lightweight and also has good resistance to material fatigue; it is very resistant to pressure and continuous use. In addition, the durable material has been properly refined and protected against UV radiation and do not undergo discoloration. This means that the cover will last for years in its original shape.With over 30 years of experience, Avisa is a leader in the design and production of these protectors. They are available in different colours and styles.Mounting:These protection frames are very easy to assemble. They are attached with double-sided 3M tape, which does not damage the original paint. This is included in the package, as are full schematic mounting instructions. The installation takes about 10 minutes.
Real 3D Carbon Rear bumper protector Fiat 500e Berlina, 3+1 & Cabrio 2020- 'Ribs'
Real 3D Carbon Rear bumper protector Fiat 500e Berlina, 3+1 & Cabrio 2020- 'Ribs'Provide optimum protection against wear and tear on the top of the rear bumper. This part of the vehicle is highly susceptible to damage from goods being loaded and unloaded. The cost of repairing and repainting is high, and the value of your car can drop.A rear bumper protector prevents damage to the top of your rear bumper. These are precisely tailored to your car type, and moulds to the bumper of your car, resulting in a perfect fit.Material:These Avisa protection strips are made of real Carbonfiber, which in addition to good protection also gives a sporty look to your car. Due to its material properties, Carbon fiber is very lightweight and also has good resistance to material fatigue; it is very resistant to pressure and continuous use. In addition, the durable material has been properly refined and protected against UV radiation and do not undergo discoloration. This means that the cover will last for years in its original shape.With over 30 years of experience, Avisa is a leader in the design and production of these protectors. They are available in different colours and styles.Mounting:These protection frames are very easy to assemble. They are attached with double-sided 3M tape, which does not damage the original paint. This is included in the package, as are full schematic mounting instructions. The installation takes about 10 minutes.
Real 3D Carbon Rear bumper protector Fiat 600 Hybrid & 600e 2023- 'Ribs'
Real 3D Carbon Rear bumper protector Fiat 600 Hybrid & 600e 2023- 'Ribs'Provide optimum protection against wear and tear on the top of the rear bumper. This part of the vehicle is highly susceptible to damage from goods being loaded and unloaded. The cost of repairing and repainting is high, and the value of your car can drop.A rear bumper protector prevents damage to the top of your rear bumper. These are precisely tailored to your car type, and moulds to the bumper of your car, resulting in a perfect fit.Material:These Avisa protection strips are made of real Carbonfiber, which in addition to good protection also gives a sporty look to your car. Due to its material properties, Carbon fiber is very lightweight and also has good resistance to material fatigue; it is very resistant to pressure and continuous use. In addition, the durable material has been properly refined and protected against UV radiation and do not undergo discoloration. This means that the cover will last for years in its original shape.With over 30 years of experience, Avisa is a leader in the design and production of these protectors. They are available in different colours and styles.Mounting:These protection frames are very easy to assemble. They are attached with double-sided 3M tape, which does not damage the original paint. This is included in the package, as are full schematic mounting instructions. The installation takes about 10 minutes.
Real 3D Carbon Rear bumper protector Ford Edge II Facelift 2018- incl. ST-Line & Vignale 'Ribs'
Real 3D Carbon Rear bumper protector Ford Edge II Facelift 2018- incl. ST-Line & Vignale 'Ribs'(only EU version)Provide optimum protection against wear and tear on the top of the rear bumper. This part of the vehicle is highly susceptible to damage from goods being loaded and unloaded. The cost of repairing and repainting is high, and the value of your car can drop.A rear bumper protector prevents damage to the top of your rear bumper. These are precisely tailored to your car type, and moulds to the bumper of your car, resulting in a perfect fit.Material:These Avisa protection strips are made of real Carbonfiber, which in addition to good protection also gives a sporty look to your car. Due to its material properties, Carbon fiber is very lightweight and also has good resistance to material fatigue; it is very resistant to pressure and continuous use. In addition, the durable material has been properly refined and protected against UV radiation and do not undergo discoloration. This means that the cover will last for years in its original shape.With over 30 years of experience, Avisa is a leader in the design and production of these protectors. They are available in different colours and styles.Mounting:These protection frames are very easy to assemble. They are attached with double-sided 3M tape, which does not damage the original paint. This is included in the package, as are full schematic mounting instructions. The installation takes about 10 minutes.
Real 3D Carbon Rear bumper protector Ford Focus Hatchback 5-doors (incl. ST-Line) 2018-2021 & Facelift 2021- 'Ribs'
Real 3D Carbon Rear bumper protector Ford Focus Hatchback 5-doors (incl. ST-Line) 2018-2021 & Facelift 2021- 'Ribs'Provide optimum protection against wear and tear on the top of the rear bumper. This part of the vehicle is highly susceptible to damage from goods being loaded and unloaded. The cost of repairing and repainting is high, and the value of your car can drop.A rear bumper protector prevents damage to the top of your rear bumper. These are precisely tailored to your car type, and moulds to the bumper of your car, resulting in a perfect fit.Material:These Avisa protection strips are made of real Carbonfiber, which in addition to good protection also gives a sporty look to your car. Due to its material properties, Carbon fiber is very lightweight and also has good resistance to material fatigue; it is very resistant to pressure and continuous use. In addition, the durable material has been properly refined and protected against UV radiation and do not undergo discoloration. This means that the cover will last for years in its original shape.With over 30 years of experience, Avisa is a leader in the design and production of these protectors. They are available in different colours and styles.Mounting:These protection frames are very easy to assemble. They are attached with double-sided 3M tape, which does not damage the original paint. This is included in the package, as are full schematic mounting instructions. The installation takes about 10 minutes.
Real 3D Carbon Rear bumper protector Ford Kuga II 2013-2019 'Ribs'
Real 3D Carbon Rear bumper protector Ford Kuga II 2013-2019 'Ribs'Provide optimum protection against wear and tear on the top of the rear bumper. This part of the vehicle is highly susceptible to damage from goods being loaded and unloaded. The cost of repairing and repainting is high, and the value of your car can drop.A rear bumper protector prevents damage to the top of your rear bumper. These are precisely tailored to your car type, and moulds to the bumper of your car, resulting in a perfect fit.Material:These Avisa protection strips are made of real Carbonfiber, which in addition to good protection also gives a sporty look to your car. Due to its material properties, Carbon fiber is very lightweight and also has good resistance to material fatigue; it is very resistant to pressure and continuous use. In addition, the durable material has been properly refined and protected against UV radiation and do not undergo discoloration. This means that the cover will last for years in its original shape.With over 30 years of experience, Avisa is a leader in the design and production of these protectors. They are available in different colours and styles.Mounting:These protection frames are very easy to assemble. They are attached with double-sided 3M tape, which does not damage the original paint. This is included in the package, as are full schematic mounting instructions. The installation takes about 10 minutes.
Real 3D Carbon Rear bumper protector Ford Kuga III ST-Line/Vignale/Hybrid 2019-2024 & FL 2024- 'Ribs'
Real 3D Carbon Rear bumper protector Ford Kuga III ST-Line/Vignale/Hybrid 2019-2024 & FL 2024- 'Ribs'Provide optimum protection against wear and tear on the top of the rear bumper. This part of the vehicle is highly susceptible to damage from goods being loaded and unloaded. The cost of repairing and repainting is high, and the value of your car can drop.A rear bumper protector prevents damage to the top of your rear bumper. These are precisely tailored to your car type, and moulds to the bumper of your car, resulting in a perfect fit.Material:These Avisa protection strips are made of real Carbonfiber, which in addition to good protection also gives a sporty look to your car. Due to its material properties, Carbon fiber is very lightweight and also has good resistance to material fatigue; it is very resistant to pressure and continuous use. In addition, the durable material has been properly refined and protected against UV radiation and do not undergo discoloration. This means that the cover will last for years in its original shape.With over 30 years of experience, Avisa is a leader in the design and production of these protectors. They are available in different colours and styles.Mounting:These protection frames are very easy to assemble. They are attached with double-sided 3M tape, which does not damage the original paint. This is included in the package, as are full schematic mounting instructions. The installation takes about 10 minutes.
Real 3D Carbon Rear bumper protector Ford Mustang VI Coupé 2015-2017 & FL 2017- incl. GT 'Ribs'
Real 3D Carbon Rear bumper protector Ford Mustang VI Coupé 2015-2017 & FL 2017- incl. GT 'Ribs'Provide optimum protection against wear and tear on the top of the rear bumper. This part of the vehicle is highly susceptible to damage from goods being loaded and unloaded. The cost of repairing and repainting is high, and the value of your car can drop.A rear bumper protector prevents damage to the top of your rear bumper. These are precisely tailored to your car type, and moulds to the bumper of your car, resulting in a perfect fit.Material:These Avisa protection strips are made of real Carbonfiber, which in addition to good protection also gives a sporty look to your car. Due to its material properties, Carbon fiber is very lightweight and also has good resistance to material fatigue; it is very resistant to pressure and continuous use. In addition, the durable material has been properly refined and protected against UV radiation and do not undergo discoloration. This means that the cover will last for years in its original shape.With over 30 years of experience, Avisa is a leader in the design and production of these protectors. They are available in different colours and styles.Mounting:These protection frames are very easy to assemble. They are attached with double-sided 3M tape, which does not damage the original paint. This is included in the package, as are full schematic mounting instructions. The installation takes about 10 minutes.
Real 3D Carbon Rear bumper protector Ford Puma 2019- 2-Pieces
Real 3D Carbon Rear bumper protector Ford Puma 2019- 2-PiecesProvide optimum protection against wear and tear on the top of the rear bumper. This part of the vehicle is highly susceptible to damage from goods being loaded and unloaded. The cost of repairing and repainting is high, and the value of your car can drop.A rear bumper protector prevents damage to the top of your rear bumper. These are precisely tailored to your car type, and moulds to the bumper of your car, resulting in a perfect fit.Material:These Avisa protection strips are made of real Carbonfiber, which in addition to good protection also gives a sporty look to your car. Due to its material properties, Carbon fiber is very lightweight and also has good resistance to material fatigue; it is very resistant to pressure and continuous use. In addition, the durable material has been properly refined and protected against UV radiation and do not undergo discoloration. This means that the cover will last for years in its original shape.With over 30 years of experience, Avisa is a leader in the design and production of these protectors. They are available in different colours and styles.Mounting:These protection frames are very easy to assemble. They are attached with double-sided 3M tape, which does not damage the original paint. This is included in the package, as are full schematic mounting instructions. The installation takes about 10 minutes.
Real 3D Carbon Rear bumper protector Honda Jazz Crosstar Hybrid 2020- 'Ribs'
Real 3D Carbon Rear bumper protector Honda Jazz Crosstar Hybrid 2020- 'Ribs'Provide optimum protection against wear and tear on the top of the rear bumper. This part of the vehicle is highly susceptible to damage from goods being loaded and unloaded. The cost of repairing and repainting is high, and the value of your car can drop.A rear bumper protector prevents damage to the top of your rear bumper. These are precisely tailored to your car type, and moulds to the bumper of your car, resulting in a perfect fit.Material:These Avisa protection strips are made of real Carbonfiber, which in addition to good protection also gives a sporty look to your car. Due to its material properties, Carbon fiber is very lightweight and also has good resistance to material fatigue; it is very resistant to pressure and continuous use. In addition, the durable material has been properly refined and protected against UV radiation and do not undergo discoloration. This means that the cover will last for years in its original shape.With over 30 years of experience, Avisa is a leader in the design and production of these protectors. They are available in different colours and styles.Mounting:These protection frames are very easy to assemble. They are attached with double-sided 3M tape, which does not damage the original paint. This is included in the package, as are full schematic mounting instructions. The installation takes about 10 minutes.
Real 3D Carbon Rear bumper protector Hyundai Bayon 2021- 'Ribs'
Real 3D Carbon Rear bumper protector Hyundai Bayon 2021- 'Ribs'Provide optimum protection against wear and tear on the top of the rear bumper. This part of the vehicle is highly susceptible to damage from goods being loaded and unloaded. The cost of repairing and repainting is high, and the value of your car can drop.A rear bumper protector prevents damage to the top of your rear bumper. These are precisely tailored to your car type, and moulds to the bumper of your car, resulting in a perfect fit.Material:These Avisa protection strips are made of real Carbonfiber, which in addition to good protection also gives a sporty look to your car. Due to its material properties, Carbon fiber is very lightweight and also has good resistance to material fatigue; it is very resistant to pressure and continuous use. In addition, the durable material has been properly refined and protected against UV radiation and do not undergo discoloration. This means that the cover will last for years in its original shape.With over 30 years of experience, Avisa is a leader in the design and production of these protectors. They are available in different colours and styles.Mounting:These protection frames are very easy to assemble. They are attached with double-sided 3M tape, which does not damage the original paint. This is included in the package, as are full schematic mounting instructions. The installation takes about 10 minutes.
Real 3D Carbon Rear bumper protector Hyundai Tucson 2020- 'Ribs'
Real 3D Carbon Rear bumper protector Hyundai Tucson 2020- incl. N-Line 'Ribs'Provide optimum protection against wear and tear on the top of the rear bumper. This part of the vehicle is highly susceptible to damage from goods being loaded and unloaded. The cost of repairing and repainting is high, and the value of your car can drop.A rear bumper protector prevents damage to the top of your rear bumper. These are precisely tailored to your car type, and moulds to the bumper of your car, resulting in a perfect fit.Material:These Avisa protection strips are made of real Carbonfiber, which in addition to good protection also gives a sporty look to your car. Due to its material properties, Carbon fiber is very lightweight and also has good resistance to material fatigue; it is very resistant to pressure and continuous use. In addition, the durable material has been properly refined and protected against UV radiation and do not undergo discoloration. This means that the cover will last for years in its original shape.With over 30 years of experience, Avisa is a leader in the design and production of these protectors. They are available in different colours and styles.Mounting:These protection frames are very easy to assemble. They are attached with double-sided 3M tape, which does not damage the original paint. This is included in the package, as are full schematic mounting instructions. The installation takes about 10 minutes.
Real 3D Carbon Rear bumper protector Hyundai Tucson Facelift 2018-
Real 3D Carbon Rear bumper protector Hyundai Tucson Facelift 2018-Provide optimum protection against wear and tear on the top of the rear bumper. This part of the vehicle is highly susceptible to damage from goods being loaded and unloaded. The cost of repairing and repainting is high, and the value of your car can drop.A rear bumper protector prevents damage to the top of your rear bumper. These are precisely tailored to your car type, and moulds to the bumper of your car, resulting in a perfect fit.Material:These Avisa protection strips are made of real Carbonfiber, which in addition to good protection also gives a sporty look to your car. Due to its material properties, Carbon fiber is very lightweight and also has good resistance to material fatigue; it is very resistant to pressure and continuous use. In addition, the durable material has been properly refined and protected against UV radiation and do not undergo discoloration. This means that the cover will last for years in its original shape.With over 30 years of experience, Avisa is a leader in the design and production of these protectors. They are available in different colours and styles.Mounting:These protection frames are very easy to assemble. They are attached with double-sided 3M tape, which does not damage the original paint. This is included in the package, as are full schematic mounting instructions. The installation takes about 10 minutes.
Real 3D Carbon Rear bumper protector Jeep Avenger + e-Hybrid & EV 2023- 'Ribs'
Real 3D Carbon Rear bumper protector Jeep Avenger + e-Hybrid & EV 2023- 'Ribs'Provide optimum protection against wear and tear on the top of the rear bumper. This part of the vehicle is highly susceptible to damage from goods being loaded and unloaded. The cost of repairing and repainting is high, and the value of your car can drop.A rear bumper protector prevents damage to the top of your rear bumper. These are precisely tailored to your car type, and moulds to the bumper of your car, resulting in a perfect fit.Material:These Avisa protection strips are made of real Carbonfiber, which in addition to good protection also gives a sporty look to your car. Due to its material properties, Carbon fiber is very lightweight and also has good resistance to material fatigue; it is very resistant to pressure and continuous use. In addition, the durable material has been properly refined and protected against UV radiation and do not undergo discoloration. This means that the cover will last for years in its original shape.With over 30 years of experience, Avisa is a leader in the design and production of these protectors. They are available in different colours and styles.Mounting:These protection frames are very easy to assemble. They are attached with double-sided 3M tape, which does not damage the original paint. This is included in the package, as are full schematic mounting instructions. The installation takes about 10 minutes.
Real 3D Carbon Rear bumper protector Kia Sportage IV Facelift 2018-2021 'Ribs'
Real 3D Carbon Rear bumper protector Kia Sportage IV Facelift 2018-2021 'Ribs'Provide optimum protection against wear and tear on the top of the rear bumper. This part of the vehicle is highly susceptible to damage from goods being loaded and unloaded. The cost of repairing and repainting is high, and the value of your car can drop.A rear bumper protector prevents damage to the top of your rear bumper. These are precisely tailored to your car type, and moulds to the bumper of your car, resulting in a perfect fit.Material:These Avisa protection strips are made of real Carbonfiber, which in addition to good protection also gives a sporty look to your car. Due to its material properties, Carbon fiber is very lightweight and also has good resistance to material fatigue; it is very resistant to pressure and continuous use. In addition, the durable material has been properly refined and protected against UV radiation and do not undergo discoloration. This means that the cover will last for years in its original shape.With over 30 years of experience, Avisa is a leader in the design and production of these protectors. They are available in different colours and styles.Mounting:These protection frames are very easy to assemble. They are attached with double-sided 3M tape, which does not damage the original paint. This is included in the package, as are full schematic mounting instructions. The installation takes about 10 minutes.
Real 3D Carbon Rear bumper protector Mazda CX-30 2019- 'Ribs'
Real 3D Carbon Rear bumper protector Mazda CX-30 2019-Provide optimum protection against wear and tear on the top of the rear bumper. This part of the vehicle is highly susceptible to damage from goods being loaded and unloaded. The cost of repairing and repainting is high, and the value of your car can drop.A rear bumper protector prevents damage to the top of your rear bumper. These are precisely tailored to your car type, and moulds to the bumper of your car, resulting in a perfect fit.Material:These Avisa protection strips are made of real Carbonfiber, which in addition to good protection also gives a sporty look to your car. Due to its material properties, Carbon fiber is very lightweight and also has good resistance to material fatigue; it is very resistant to pressure and continuous use. In addition, the durable material has been properly refined and protected against UV radiation and do not undergo discoloration. This means that the cover will last for years in its original shape.With over 30 years of experience, Avisa is a leader in the design and production of these protectors. They are available in different colours and styles.Mounting:These protection frames are very easy to assemble. They are attached with double-sided 3M tape, which does not damage the original paint. This is included in the package, as are full schematic mounting instructions. The installation takes about 10 minutes.
Real 3D Carbon Rear bumper protector Mazda CX-5 2012-2017 'Ribs'
Real 3D Carbon Rear bumper protector Mazda CX-5 2012-2017 'Ribs'Provide optimum protection against wear and tear on the top of the rear bumper. This part of the vehicle is highly susceptible to damage from goods being loaded and unloaded. The cost of repairing and repainting is high, and the value of your car can drop.A rear bumper protector prevents damage to the top of your rear bumper. These are precisely tailored to your car type, and moulds to the bumper of your car, resulting in a perfect fit.Material:These Avisa protection strips are made of real Carbonfiber, which in addition to good protection also gives a sporty look to your car. Due to its material properties, Carbon fiber is very lightweight and also has good resistance to material fatigue; it is very resistant to pressure and continuous use. In addition, the durable material has been properly refined and protected against UV radiation and do not undergo discoloration. This means that the cover will last for years in its original shape.With over 30 years of experience, Avisa is a leader in the design and production of these protectors. They are available in different colours and styles.Mounting:These protection frames are very easy to assemble. They are attached with double-sided 3M tape, which does not damage the original paint. This is included in the package, as are full schematic mounting instructions. The installation takes about 10 minutes.
Real 3D Carbon Rear bumper protector Mazda CX-5 II 2017- incl. Facelift
Real 3D Carbon Rear bumper protector Mazda CX-5 II 2017- incl. FaceliftProvide optimum protection against wear and tear on the top of the rear bumper. This part of the vehicle is highly susceptible to damage from goods being loaded and unloaded. The cost of repairing and repainting is high, and the value of your car can drop.A rear bumper protector prevents damage to the top of your rear bumper. These are precisely tailored to your car type, and moulds to the bumper of your car, resulting in a perfect fit.Material:These Avisa protection strips are made of real Carbonfiber, which in addition to good protection also gives a sporty look to your car. Due to its material properties, Carbon fiber is very lightweight and also has good resistance to material fatigue; it is very resistant to pressure and continuous use. In addition, the durable material has been properly refined and protected against UV radiation and do not undergo discoloration. This means that the cover will last for years in its original shape.With over 30 years of experience, Avisa is a leader in the design and production of these protectors. They are available in different colours and styles.Mounting:These protection frames are very easy to assemble. They are attached with double-sided 3M tape, which does not damage the original paint. This is included in the package, as are full schematic mounting instructions. The installation takes about 10 minutes.
Real 3D Carbon Rear bumper protector Mazda MX-30 2020- 'Ribs'
Real 3D Carbon Rear bumper protector Mazda MX-30 2020- 'Ribs'Provide optimum protection against wear and tear on the top of the rear bumper. This part of the vehicle is highly susceptible to damage from goods being loaded and unloaded. The cost of repairing and repainting is high, and the value of your car can drop.A rear bumper protector prevents damage to the top of your rear bumper. These are precisely tailored to your car type, and moulds to the bumper of your car, resulting in a perfect fit.Material:These Avisa protection strips are made of real Carbonfiber, which in addition to good protection also gives a sporty look to your car. Due to its material properties, Carbon fiber is very lightweight and also has good resistance to material fatigue; it is very resistant to pressure and continuous use. In addition, the durable material has been properly refined and protected against UV radiation and do not undergo discoloration. This means that the cover will last for years in its original shape.With over 30 years of experience, Avisa is a leader in the design and production of these protectors. They are available in different colours and styles.Mounting:These protection frames are very easy to assemble. They are attached with double-sided 3M tape, which does not damage the original paint. This is included in the package, as are full schematic mounting instructions. The installation takes about 10 minutes.