In de categorie diversen hebben we een zeer groot aanbod aan accessoires, gereedschappen, herstel- en onderhoudsproducten. Van poetsmiddelen tot olie en van een krik tot antivries, we hebben het allemaal.
OMP seat HTE carbon
Same characteristics as HA/772. Shell: carbon fiber shell molded in autoclave. Perforated seat shell enhances seat and back breathability (only on carbon version). Upholstered customized on demand.
OMP Seat HTE Navy Blue
Racing seat Navy Blue • Gel-coated fiberglass shell. • Large shoulder harness slots to accommodate various heights. • High side bolsters for lateral leg support for higher protection. • Shaped security headrest to limit lateral movement of the helmet. • Removable back cushion - base - split leg rests to allow maximum individual seating comfort. • Rubber dots for improved grip inserts. • Compatible with the HANS® safety device. • Side fixing points type W. Upholstered entirely in new high breathability AIRTEX® material. HANS compatible. FIA homologated 8859/1999.
OMP Seat HTE Red
Racing seat. • Gel-coated fiberglass shell. • Large shoulder harness slots to accommodate various heights. • High side bolsters for lateral leg support for higher protection. • Shaped security headrest to limit lateral movement of the helmet. • Removable back cushion - base - split leg rests to allow maximum individual seating comfort. • Rubber dots for improved grip inserts. • Compatible with the HANS® safety device. • Side fixing points type W. Upholstered entirely in new high breathability AIRTEX® material.
OMP Seat Prototipo
Ultra-light seat with backrest inclination specific for GT cars. With carbon fibre shell molded in autoclave. 5 seat belt openings. Side fixing points (Type W). Colour: black. A - removable cushions: back rest, base and split sleg rest HANS compatible. FIA homologated.
OMP stoel HTE - One
The seat has passed the standard FIA 8862-2009. The most advanced standard of the world for racing seats redefines completely the characteristics of the seat, forming a true Cell Survival, for a security level compared to that of the cars of Formula 1. +300% increased resistance, with exclusive technology for maximum resistance and lightness. Shell: with carbon fiber. Fixing points: side (type W). 5 seat belt openings. A: removable cushions: back rest, base and split sleg rest. Colour: black. HANS ® compatible. Homologation FIA 8862-2009 HTE-ONE is predisposed for mounting the exclusive system AIR FLO by OMP for ventilation of the seat back.
OMP Tech-race Headset
Headseat with adjustable boom and dynamic microphone; noise reduction. Nexus plug compatible with JA/833 control boxes.
OMPI-Race Intercom kit for open helmets
Exclusively compatible only with intercom I-RACE Intercom kit for helmets with cable and Nexus plug already wired (for example OMP JET 10). Flat, soft and bigger earcups for better comfort, velcro sewed on the outer side to permit the fixing in the helmet. Noise reducing microphone on flexible
Oneway Body Cladding Nissan Navara D40 2005-2010 - Matt black
Oneway Body Cladding Nissan Navara D40 2005-2010 - Matt blackUpgrade your car with our high-quality ABS plastic side body moulding, which offers the perfect balance between style and protection. Enhance your driving experience today with this high-quality accessory that combines aesthetics with functionality.Developed in GermanyDesigned and produced by ONEWAYBrand new OEM quality1 year manufacturer's warranty100% vehicle-specific fitABE TÜV Approval: TÜV approval is not requiredProduct SpecificationsColour: Matt blackMaterial: ABS plasticMounting style: 3M adhesive tape (pre-installed)Can be paintedScope of delivery:Side Body Moulding - 4-piece setAssembly instructionsMounting kit
Oneway Body Cladding Volkswagen Transporter T7 2024- (Short wheel base / All versions) - Gloss black
Oneway Body Cladding Volkswagen Transporter T7 2024- (Short wheel base / All versions) - Gloss blackUpgrade your car with our high-quality ABS plastic side body moulding, which offers the perfect balance between style and protection. Enhance your driving experience today with this high-quality accessory that combines aesthetics with functionality.Developed in GermanyDesigned and produced by ONEWAYBrand new OEM quality1 year manufacturer's warranty100% vehicle-specific fitABE TÜV Approval: TÜV approval is not requiredProduct SpecificationsColour: Gloss blackMaterial: ABS plasticMounting style: 3M adhesive tape (pre-installed)Can be paintedScope of delivery:Side Body Moulding - 5-piece setAssembly instructionsMounting kit
Oneway Rear Diffuser Audi Q3 (F3N) Sportback S-Line 2019-2025 excl. RSQ3 - Gloss black
Oneway Rear Diffuser Audi Q3 (F3N) Sportback S-Line 2019-2025 excl. RSQ3 - Gloss blackAdd a touch of sophistication and style to your rear bumper with our rear diffuser. This sporty upgrade not only improves the aesthetics, but also ensures that your vehicle stands out on the road and makes a strong statement. The rear valance comes in a glossy black finish that you can easily paint if you prefer.Developed in GermanyDesigned and produced by ONEWAYBrand new OEM quality1 year manufacturer's warranty100% vehicle-specific fitABE TÜV Approval: NoProduct SpecificationsColour: Glossy blackMaterial: ABS plasticMounting style: ScrewsCan be paintedScope of delivery:Rear Diffuser - 1 pieceAssembly instructionsMounting kit
Oneway Set Fender Flares Ford Ranger T9 2022- - Gloss black
Oneway Set Fender Flares Ford Ranger T9 2022- - Gloss blackAggressive look: Transform your car's appearance into that of a powerhouse that turns heads. Our mudguard extensions have a bold and aggressive look and ensure that your vehicle stands out on the road with its impressive presence.Developed in GermanyDesigned and produced by ONEWAYBrand new OEM quality1 year manufacturer's warranty100% vehicle-specific fitABE TÜV Approval: YesProduct SpecificationsColour: Gloss blackMaterial: ABS plasticMounting style: Screws (if necessary, remove the mud flaps)Can be paintedProduct Dimensions: 1194 x 629 x 93 mmExtension: 35 mmScope of delivery:Fender Flares - 4-piece setAssembly instructionsMounting kit
Oneway Set Fender Flares Volkswagen Amarok MK2 2022- - Gloss black
Oneway Set Fender Flares Volkswagen Amarok MK2 2022- - Gloss blackAggressive look: Transform your car's appearance into that of a powerhouse that turns heads. Our mudguard extensions have a bold and aggressive look and ensure that your vehicle stands out on the road with its impressive presence.Developed in GermanyDesigned and produced by ONEWAYBrand new OEM quality1 year manufacturer's warranty100% vehicle-specific fitABE TÜV Approval: NoProduct SpecificationsColour: Gloss blackMaterial: ABS plasticMounting style: Screws (if necessary, remove the mud flaps)Can be paintedProduct Dimensions: 1240 x 660 x 100 mmExtension: 50 mmScope of delivery:Fender Flares - 4-piece setAssembly instructionsMounting kit
Oneway Set Wheel Arch Trims Volkswagen Transporter T7 2024- (Short wheel base / Sliding door left & right) - Gloss black
Oneway Set Wheel Arch Trims Volkswagen Transporter T7 2024- (Short wheel base / Sliding door left & right) - Gloss blackUpgrade your car with our ABS plastic wheel arch mouldings, which offer the perfect balance between style and protection. Enhance your driving experience today with this high-quality accessory that combines aesthetics with functionality.Developed in GermanyDesigned and produced by ONEWAYBrand new OEM quality1 year manufacturer's warranty100% vehicle-specific fitABE TÜV Approval: NoProduct SpecificationsColour: Gloss blackMaterial: ABS plasticMounting style: 3M adhesive tape (pre-installed)Can be paintedExtension: 2 mmScope of delivery:Wheel Arch Trims - 12-piece setAssembly instructionsMounting kit
Oneway Set Wheel Arch Trims Volkswagen Transporter T7 2024- (Short wheel base / Sliding door left) - Gloss black
Oneway Set Wheel Arch Trims Volkswagen Transporter T7 2024- (Short wheel base / Sliding door left) - Gloss blackUpgrade your car with our ABS plastic wheel arch mouldings, which offer the perfect balance between style and protection. Enhance your driving experience today with this high-quality accessory that combines aesthetics with functionality.Developed in GermanyDesigned and produced by ONEWAYBrand new OEM quality1 year manufacturer's warranty100% vehicle-specific fitABE TÜV Approval: NoProduct SpecificationsColour: Gloss blackMaterial: ABS plasticMounting style: 3M adhesive tape (pre-installed)Can be paintedExtension: 2 mmScope of delivery:Wheel Arch Trims - 11-piece setAssembly instructionsMounting kit
Oneway Set Wheel Arch Trims Volkswagen Transporter T7 2024- (Short wheel base / Sliding door right) - Gloss black
Oneway Set Wheel Arch Trims Volkswagen Transporter T7 2024- (Short wheel base / Sliding door right) - Gloss blackUpgrade your car with our ABS plastic wheel arch mouldings, which offer the perfect balance between style and protection. Enhance your driving experience today with this high-quality accessory that combines aesthetics with functionality.Developed in GermanyDesigned and produced by ONEWAYBrand new OEM quality1 year manufacturer's warranty100% vehicle-specific fitABE TÜV Approval: NoProduct SpecificationsColour: Gloss blackMaterial: ABS plasticMounting style: 3M adhesive tape (pre-installed)Can be paintedExtension: 2 mmScope of delivery:Wheel Arch Trims - 11-piece setAssembly instructionsMounting kit
Oneway Set Wheel Arch Trims Volkswagen Transporter T7 2024- (Short wheel base / Without sliding doors) - Gloss black
Oneway Set Wheel Arch Trims Volkswagen Transporter T7 2024- (Short wheel base / Without sliding doors) - Gloss blackUpgrade your car with our ABS plastic wheel arch mouldings, which offer the perfect balance between style and protection. Enhance your driving experience today with this high-quality accessory that combines aesthetics with functionality.Developed in GermanyDesigned and produced by ONEWAYBrand new OEM quality1 year manufacturer's warranty100% vehicle-specific fitABE TÜV Approval: NoProduct SpecificationsColour: Gloss blackMaterial: ABS plasticMounting style: 3M adhesive tape (pre-installed)Can be paintedExtension: 2 mmScope of delivery:Wheel Arch Trims - 10-piece setAssembly instructionsMounting kit
OPEN-END SPANNER SET
Set of 8 pieces. 6-22 mm DIN.
OptiMate 1 VoltMatic 6V / 12V 0,6A Battery Saving charger-tester-maintainer
OptiMate 1 VoltMatic 6V / 12V 0.6A Battery Charger / Tester / Maintainer BRONZE series: 4-stage 6V / 12V 0.6A battery charger and maintainer The OptiMate 1 VoltMatic automatically adjusts to the battery voltage (6V or 12V) – Simply connect it to the battery and the OptiMate 1 VoltMatic does the rest; no supervision required! Delivers 0.6 amps of charging current, recommended for maintaining smaller batteries. Charges and provides long-term maintenance – Simply connect it to the battery and the OptiMate 1 VoltMatic does the rest; no supervision required! For 6V and 12V lead-acid (Pb) batteries, including STD (with filler caps), AGM & GEL (sealed VRLA). IDEAL FOR: AGM, GEL and STD 6V or 12V batteries from 2 to 28Ah CHARGING CURRENT: 0.6A (constant current) CHARGING VOLTAGE: nominal: 6V and 12V; range: 4V – 14.4V OPERATION: Fully automatic STAGES: 4 FEATURES: Charges 6V and 12V lead-acid batteries. The VoltMatic microprocessor automatically selects the correct charging voltage. USE: Indoor (minimum temperature: -4°F / -20°C). INPUT: Universal (100–240V 50–60Hz), high efficiency (as specified by CEC). DESIGN: Dust-proof plug-in housing, with a 12 ft/370 cm charging cable featuring an SAE connector. SAFETY: No risk of overcharging. Completely safe for vehicle electronics. Suppresses sparks. Safe for long-term battery maintenance. Automatic shut-off in the event of a short circuit or battery disconnection. INCLUDED: Weather-resistant battery cable and a set of battery clamps. WARRANTY: 3-year limited replacement warranty.
Optimate 12V Panelmount socket kit - Weatherproof AUTO socket with SAE connection cable
Optimate 12V Panelmount socket kit- Weatherproof AUTO socket with SAE connection cable The OptiMate O‑46KIT provides a complete, ready-to-install solution for adding an external 12V power and charging port to work trucks, trailers, RVs/caravans, industrial machines, motorcycles, ATVs, and UTVs. – This kit includes the O‑46 weatherproof panel-mount socket and the O‑22 SAE connection cable. Universal / standard 12V socket (Ø21mm / 13/16”) with locking blades that latches onto a suitable plug (O-02 / O-22) – guarantees a reliable vibration resistant connection. Includes OptiMate O-22 adapter cable – provides a reliable SAE-to-AUTO plug connection for standard Ø21–22 mm 12V automotive sockets. Fused battery connection cable with size adaptable ring terminal – default M6 (1/4”) adaptable to M8 (5/16”) provides flexible installation options. Premium specifications – 100cm (40”) length, 15A fuse, -40° rated cable, 10A (13A max) current rating, panel mount. O‑46 Weatherproof Panel-Mount Socket LENGTH: 40″/100cm CONNECTORS: 12V auto socket to 1/4″ (M6) / 5/16” (M8) ringlets CABLE RATING: 16AWG (1.32mm2) SPT2-W FUSE: 15A USE: -40°C/-40°F low temperature use STYLE: Panel mount with sealing cap. WARRANTY: 3-year limited replacement warranty O‑22 SAE Connection Cable (Included) LENGTH: 12″ / 30cm CONNECTORS: Ø21–22mm AUTO Plug to OptiMate heavy-duty SAE (standard 2-pin) CABLE RATING: All-weather, heavy-duty cable FUSE: Integrated fuse inside connector USE: Reliable, vibration-resistant power delivery for 12V automotive and motorcycle applications STYLE: Latching plug with 360° flared negative ring for secure contact inside socket WARRANTY: 3-year limited replacement warranty
OptiMate 2 DUO x 2 BANK - 12V / 12,8V 2-Amp Battery Saving charger-tester-maintainer
OptiMate 2 DUO x 2 BANK – 12V / 12.8V 2-amp battery charger / tester / maintainer BRONZE series: 5-stage 2x 12V / 12.8V 2A sealed charger & maintainer The OptiMate 2 DUO x2 unit automatically adapts to the connected battery type – Ensures healthy lithium or lead-acid batteries! Charge, test and maintain 2x 12V lead-acid batteries (STD, AGM, GEL) / 12.8V lithium LFP (LiFePO4) batteries independently – batteries are always ready for use. Charges automatically and provides long-term maintenance – the OptiMate 2 DUO QUAD charger makes your battery stronger and extends its life, with no supervision required! all types of 12V powersport batteries, including lead-acid (Pb) > STD (with filler caps), AGM, GEL (sealed VRLA) & EFB, and Li-Ion batteries manufactured using LiFePO4 / LFP technology. IDEAL FOR: 2x 12V AGM, GEL and STD batteries from 6 – 48 Ah // Lithium (LiFePO4) 12.8/13.2V batteries from 2 – 24 Ah CHARGING CURRENT: 2A (constant current, per bank) CHARGING VOLTAGE: nominal: 12V & 12.8V; range: 4V – 14.4V OPERATION: Fully automatic STAGES: 5 FEATURES: Automatically adapts to Pb or LFP batteries. 2 x 24/7 safe long-term maintenance. USE: Indoor / outdoor (lowest temperature: -40 °F / -40 °C). INPUT: Universal (100–240V 50–60Hz), high efficiency (as specified in CEC). DESIGN: Weatherproof housing with wall mounting, including a 6ft / 180cm AC power cable and 2 x 6ft / 180cm charging cables with SAE connectors at the end. SAFETY: No risk of overcharging. Completely safe for vehicle electronics. Suppresses sparks. Safe for long-term battery maintenance. Automatic shut-off in the event of a short circuit or battery disconnection. INCLUDES: 2 x water-resistant battery cables and 2 x battery clip sets WARRANTY: 3-year limited replacement warranty.
OptiMate 2 DUO x 4 BANK - 12V / 12,8V 2-Amp Battery Saving charger-tester-maintainer
OptiMate 2 DUO x 4 BANK – 12V / 12.8V 2-amp battery charger / tester / maintainer BRONZE series: 5-stage 4x 12V / 12.8V 2A sealed charger & maintainer The OptiMate 2 DUO QUAD unit automatically adapts to the connected battery type – Ensures healthy lithium or lead-acid batteries! Charge, test and maintain 4x 12V lead-acid batteries (STD, AGM, GEL) / 12.8V lithium LFP (LiFePO4) batteries independently – batteries are always ready for use. Charges automatically and provides long-term maintenance – the OptiMate 2 DUO QUAD charger makes your battery stronger and extends its life, with no supervision required! all types of 12V powersport batteries, including lead-acid (Pb) > STD (with filler caps), AGM, GEL (sealed VRLA) & EFB, and Li-Ion batteries manufactured using LiFePO4 / LFP technology. IDEAL FOR: 4x 12V AGM, GEL and STD batteries from 6 – 48 Ah // Lithium (LiFePO4) 12.8/13.2V batteries from 2 – 24 Ah CHARGING CURRENT: 2A (constant current, per bank) CHARGING VOLTAGE: nominal: 12V & 12.8V; range: 4V – 14.4V OPERATION: Fully automatic STAGES: 5 FEATURES: Automatically adapts to Pb or LFP batteries. 4 x 24/7 safe long-term maintenance. USE: Indoor / outdoor (lowest temperature: -40 °F / -40 °C). INPUT: Universal (100–240V 50–60Hz), high efficiency (as specified in CEC). DESIGN: Weatherproof housing with wall mounting, including a 6ft / 180cm AC power cable and 4 x 6ft / 180cm charging cables with SAE connectors at the end. SAFETY: No risk of overcharging. Completely safe for vehicle electronics. Suppresses sparks. Safe for long-term battery maintenance. Automatic shut-off in the event of a short circuit or battery disconnection. INCLUDES: 4 x water-resistant battery cables and 4 x battery clip sets WARRANTY: 3-year limited replacement warranty.
OptiMate 5 6V 4A / 12V 3A Battery Saving charger-tester-maintainer
OptiMate 5 6V 4A / 12V 3A Battery charger / tester / maintainer SILVER series: 8-stage 6V 4A / 12V 3A sealed battery-preserving charger & maintainer The OptiMate 5 6V/12V is the smarter charger for all 6V and 12V lead-acid batteries – ideal for deep-cycle batteries! Select the correct charging voltage for your 6V or 12V lead-acid battery – your selection remains in the memory even if the AC power fails. Fully automatic multi-stage programme safely brings the battery to full charge – simply connect it to the battery and the OptiMate 5 6V/12V does the rest; no supervision required! For 6V and 12V lead-acid (Pb) batteries, including STD (with filler caps), AGM, GEL (sealed VRLA), deep-cycle and SLI. IDEAL FOR: STD, AGM, GEL, SLI & DEEP-CYCLE 6 & 12V batteries from 3 – 120Ah (up to 160Ah for 6V). CHARGING CURRENT: 4A (6V) / 3A (12V) (Ampmatic) CHARGING VOLTAGE: 6V range: 0.5V – 7.2V; 12V range: 8V (0.5V*) – 14.4V *Voltage safety check. Will not charge the battery if its voltage does not match the selected voltage. The user must confirm that it is a 12V battery with low voltage > press and hold the selection button for 3 seconds to confirm > the lowest charging voltage for 12V has been reduced to 0.5V. OPERATION: Selectable STEPS: 8 FEATURES: RESCUES & CHARGES all 6V & 12V lead-acid batteries. USE: Indoor / outdoor (lowest temperature: -40°F / -40°C). INPUT VOLTAGE: Universal (100–240V 50–60Hz), high efficiency (as specified by CEC). DESIGN: Weatherproof housing with wall mounting, including a 6ft / 180cm AC power cable and a 6ft / 180cm charging cable with an SAE connector at the end. RECOVERY: Starts at a low voltage of 0.5V + 2-stage desulphation recovery. SAFE: Eliminates the risk of overcharging. Completely safe for vehicle electronics. Suppresses sparks. Safe for long-term battery maintenance. Automatic shut-off in the event of a short circuit or battery disconnection. INCLUDES: Water-resistant battery cable and battery clip set WARRANTY: 3-year limited replacement warranty.
OptiMate 5 Start Stop - 12V/4.0A 7-step battery saving charger-tester-maintainer
SILVER series: 7-step 12V 4A sealed battery saving charger & maintainerIDEAL FOR: AGM, GEL, STD & EFB 12V batteries from 12 – 160Ah.CHARGING AMPS: 4A (Constant current, temperature compensated)CHARGING VOLTS: nominal: 12V range: 0.5V - 14.4VOPERATION: Fully automaticSteps: 7FEATURES: Ideal 12V care for START/STOP & Deep Cycle applications. Saves batteries from as low as 0,5V and will then charge and maintain the battery, all automatically.USE: Indoor / Outdoor (lowest temperature: -40°F / -40°C).INPUT: Global (100-240V 50-60Hz), high efficiency (CEC listed).STYLE: Weatherproof case with wall mounts, with 6ft / 180cm AC supply lead and 6ft / 180cm charge lead ending in SAE connector.SAVE : Low Volt Start of 0.5V + 2-step desulphation recovery.SAFE: No risk of overcharging. Totally safe for vehicle electronics. Sparks suppressed. Safe for long-term battery maintenance. Automatic shut-down if short-circuited or battery disconnected.INCLUDED: Weatherproof battery lead & battery clip set.WARRANTY: 3-year limited replacement warranty.
OptiMate 6 Ampmatic 12V/6.0A 9-step battery saving charger-tester-maintainer
SILVER series: 9-step 12V 6A sealed battery saving charger & maintainerIDEAL FOR: AGM, GEL & STD 12V batteries from 3 – 144Ah.CHARGING AMPS: 6A (Ampmatic current)CHARGING VOLTS: nominal: 12V range: 0.5V - 14.4VOPERATION: Fully automaticSteps: 9FEATURES: Saves batteries other chargers can’t, because it recognizes the difference between a discharged battery that needs charging and a dead flat sulphated battery that needs savingUSE: Indoor / Outdoor (lowest temperature: -40°F / -40°C).INPUT: Global (100-240V 50-60Hz), high efficiency (CEC listed).STYLE: Weatherproof case with wall mounts, with 6ft / 180cm AC supply lead and 6ft / 180cm charge lead ending in SAE connector.SAVE : Low Volt Start of 0.5V + 2-step desulphation recovery.SAFE: No risk of overcharging. Totally safe for vehicle electronics. Sparks suppressed. Safe for long-term battery maintenance. Automatic shut-down if short-circuited or battery disconnected.INCLUDED: Weatherproof battery lead & battery clip set.WARRANTY: 3-year limited replacement warranty.
OptiMate 6 Select 12V/6.0A 9-step battery saving charger-tester-maintainer
GOLD series: 9-stage 12V 6A battery charger and maintenance charger for sealed batteries with a recovery programmeOptiMate 6 Select (version 2) is the ultimate 12V battery charger capable of restoring, charging, testing and maintaining any type of 12V battery – Pb (lead-acid), AGM and lithium LFP.Three battery modes ensure that every vehicle’s starter or auxiliary battery receives the correct charging voltage and charging method:Pb – 14.4V for STD lead-acid (wet / EFB / GEL), AGM – 14.7V for premium AGM batteriesLFP – 14.3V for LiFePO4-based lithium– The mode selection remains stored in the memory, even if the mains power fails. IDEAL FOR: AGM, GEL, STD & EFB 12V batteries from 3 – 144Ah & LITHIUM LFP (LiFePO4) 12.8/13.2V batteries from 2 – 68Ah.CHARGING CURRENT: 6A (Ampmatic current)CHARGING VOLTAGE: 3 modes: 12V Pb: 0.5V – 14.4V, 12V Pb-AGM: 0.5V – 14.7V, LFP: 0.5V – 14.3VOPERATION: SelectableSTEPS: 9FUNCTIONS: Service mode provides continuous battery support, ideal for vehicle tuning, diagnostics and troubleshooting, or showroom use.USE: Indoor / outdoor (lowest temperature: -40°F / -40°C).INPUT: Worldwide (100–240V 50–60Hz), high efficiency (CEC-listed).DESIGN: Weatherproof, wall-mounted housing, with a 6ft / 180cm AC power cable and a 6ft / 180cm charging cable with SAE connector.SAVE : Starts at low voltage from 0.5V + 2-stage desulphation recovery. SAFE: No risk of overcharging. Completely safe for vehicle electronics. Sparking suppressed. Safe for long-term battery maintenance. Automatic shut-off in the event of a short circuit or if the battery is disconnected.INCLUDED: Battery clamp set.WARRANTY: 3-year limited replacement warranty.
Optimate 7 Select 12V 10-Amp Battery Saving charger-tester-maintainer
OptiMate 7 Select 12V 10-Amp Battery Charger / Tester / Maintainer GOLD series: 9-stage 12V 10A sealed battery-preserving charger & maintainer The OptiMate 7 Select ‘GOLD series’ is the ‘PRO choice’ battery charger that unlocks the full potential of your high-performance 12V battery. – Includes a power supply to support the battery during tuning or troubleshooting. Select a charging voltage of 14.4V for most batteries or 14.7V for premium AGM batteries, or select the power supply support mode – the selection is stored in memory, even if the AC power fails The power supply mode provides a constant power supply for tuning, diagnostics and troubleshooting in the vehicle. Fully automatic multi-stage programme safely charges the battery to full capacity – Simply connect it to the battery and the OptiMate 7 Select does the rest; no supervision required! For lead-acid (Pb) 12V automotive starter (SLI) including STD (with filler caps), AGM, GEL (sealed VRLA) & EFB and deep-cycle battery types. IDEAL FOR: AGM, GEL, STD, EFB & DEEP-CYCLE 12V batteries from 3 to 240Ah. CHARGING CURRENT: 10A (Ampere current) CHARGING VOLTAGE: 12V range (3 modes): 0.5V – 14.4V, 0.5V – 14.7V, 0.5V – 13.6V (Power supply) OPERATION: Selectable Steps: 9 FEATURES: Power supply, for diagnostic and troubleshooting assistance. USE: Indoor/outdoor (lowest temperature: -40°F/ -40°C). INPUT VOLTAGE: Universal (100–240V 50–60Hz), high efficiency (CEC-listed), fully sealed. DESIGN: Weatherproof housing with wall mounts, a 6ft/180cm AC cable and 6ft/180cm charging cables terminated with SAE connectors. RECHARGING: Low-voltage start at 0.5V + two-stage desulphation SAFE: No risk of overcharging. Completely safe for vehicle electronics. Sparks are suppressed. Safe long-term battery maintenance. Automatic shut-off in the event of a short circuit or when the battery is disconnected. INCLUDED: Weatherproof battery cable & battery terminal set included. WARRANTY: 3-year limited replacement warranty.
OptiMate CABLE O-97C12 – MagCode Clip – Magnetic battery charger connector to SAE – 12V
OptiMate CABLE O-97C12 – MagCode Clip – Magnetic battery charger connection to SAE – 12VPremium specifications – MagCode® clip, 75 cm (30”) long, 10A (13A max) current, standard SAE charging connector. all OptiMate chargers with an SAE plug. The 12V clip fits the O-97P12 12V port.The OptiMate O-97C12 uses the 12V MagCode® clip to provide a short-circuit-proof, self-aligning magnetic battery charger connection. LENGTH: 30″/75 cmCONNECTORS: 12V MagCode clip to SAECABLE RATING: 16 AWG (1.32 mm²) SPT2-WUSE: -40°C/-40°F low-temperature operationSTYLE: Includes protective cap for OptiMATE heavy-duty SAE connector.WARRANTY: 3-year limited replacement warranty
OptiMate CABLE O-97C24 – MagCode Clip – Magnetic battery charger connector to SAE – 24V
OptiMate CABLE O-97C24 – MagCode Clip – Magnetic battery charger connection to SAE – 24VPremium specifications – MagCode® clip, 75 cm (30”) long, 10A (13A max) current, standard SAE charging connector. all OptiMate chargers with an SAE plug. The 24V clip fits the O-97P24 24V port.The OptiMate O-97C24 uses the 24V MagCode® clip to provide a short-circuit-proof, self-aligning magnetic battery charger connection. LENGTH: 30″/75 cmCONNECTORS: 24V MagCode clip to SAECABLE RATING: 16 AWG (1.32 mm²) SPT2-WUSE: -40°C/-40°F low-temperature operationSTYLE: Includes protective cap for OptiMATE heavy-duty SAE connector.WARRANTY: 3-year limited replacement warranty
OptiMate Lithium 4s 10-Amp Battery Saving charger-tester-maintainer
OptiMate Lithium 4s 10-Amp battery charger / tester / maintainer LITHIUM series: 10-stage 12.8V 10A sealed battery charger & trickle charger The OptiMate Lithium 4s 10A is an advanced battery charger, featuring TUNE mode for diagnostics or firmware updates, for 12.8V/13.2V LiFePO4 / LFP batteries – the ultimate lithium charger for racing car owners! Power reset quickly recharges the battery. Provides stable battery support during ECU programming / troubleshooting. Fully automatic multi-stage programme safely brings the battery up to full charge. – Simply connect it to the battery and the OptiMate Lithium 4s 10A does the rest; no supervision required! IDEAL FOR: LiFePO4 (LFP) batteries with 4-cell configurations of 12.8V/13.2V, ranging from 3 to 120 Ah. CHARGING CURRENT: 10A (Ampmatic current) CHARGING VOLTAGE: nominal: 12.8V – 13.2V; operating range: 0.5V – 14.4V OPERATION: Fully automatic STAGES: 10 FEATURES: TUNE mode provides stable power for reprogramming vehicle systems, demonstrating vehicles in the showroom, or retaining stored settings when battery cables are disconnected to fit powered accessories or replace the battery. USE: Indoor/outdoor (minimum temperature: -40°F / -40°C). INPUT POWER: Universal (100–240V 50–60Hz), high efficiency (CEC-listed), fully sealed. DESIGN: Weatherproof housing with wall mounts, a 6ft/180cm AC cable and 6ft/180cm charging cables terminated with SAE connectors. RECOVERY: Starts at a low voltage of 0.5 V and features three-stage recovery and low-voltage testing SAFE: No risk of overcharging. Completely safe for vehicle electronics. Sparks are suppressed. Safe long-term battery maintenance. Automatic shut-off in the event of a short circuit or when the battery is disconnected. INCLUDES: Weatherproof battery cable & battery terminal set included. WARRANTY: 3-year limited replacement warranty
OptiMate Lithium 4s 6-Amp Battery Saving charger-tester-maintainer
OptiMate Lithium 4s 6-Amp Battery Charger / Tester / Maintainer LITHIUM series: 10-stage 12.8V 6A sealed battery-preserving charger & maintainer OptiMate Lithium 4s 6A is the advanced ‘PRO’ battery charger for your performance/racing motorbike, car or boat – The racer’s and dealer’s choice! Power reset quickly recharges the battery. Provides stable battery support during ECU programming / troubleshooting. Fully automated multi-step programme charges the battery safely and fully – Simply connect it to the battery and the OptiMate Lithium 4s 6A does the rest. No supervision required! IDEAL FOR: LiFePO4 (LFP) batteries with 4-cell configurations of 12.8V/13.2V between 3 and 72Ah. CHARGING CURRENT: 6A (Ampmatic current) CHARGING VOLTAGE: nominal: 12.8V – 13.2V; operating range: 0.5V – 14.4V OPERATION: Fully automatic STAGES: 10 FEATURES: Starts at 0.5V with continuous monitoring / testing for charge acceptance or faulty / short-circuited cells. Unnecessary (and unsafe) charging of a faulty battery is prevented. USE: Indoor/outdoor (lowest temperature: -40°F / -40°C). INPUT CURRENT: Universal (100–240V 50–60Hz), high efficiency (CEC-listed), fully sealed. DESIGN: Weatherproof housing with wall mounts, a 6ft/180cm AC cable and 6ft/180cm charging cables terminated with SAE connectors. RECOVERY: Starts at a low voltage of 0.5V and features three-stage recovery and low-voltage testing. SAFE: No risk of overcharging. Completely safe for vehicle electronics. Sparks are suppressed. Safe long-term battery maintenance. Automatic shut-off in the event of a short circuit or when the battery is disconnected. INCLUDES: Weather-resistant battery cable & battery terminal set included. WARRANTY: 3-year limited replacement warranty.
OptiMate Lithium 8s 5-Amp Battery Saving charger-tester-maintainer
OptiMate Lithium 8s 5-Amp Battery Charger / Tester / Maintainer LITHIUM series: 10-stage 25.6V/26.4V 5A sealed battery charger & trickle charger The OptiMate Lithium 8s 5A is the professional battery charger for 25.6V/26.4V LiFePO4 / LFP batteries in your light aircraft or medical equipment, featuring a power support mode for diagnostics or software updates – the ultimate solution for ‘24V’ lithium batteries! Power reset quickly recharges the battery. Provides stable battery support during ECU programming / troubleshooting. Fully automatic multi-stage programme safely brings the battery up to full charge – Simply connect it to the battery and the OptiMate Lithium 8s 5A does the rest; no supervision required! IDEAL FOR: LiFePO4 (LFP) batteries with 4-cell configurations of 25.6V/26.4V between 2.5 – 100Ah. CHARGING CURRENT: 5A (Ampmatic current) CHARGING VOLTAGE: nominal: 25.6V / 26.4V; operating range: 0.5V – 28.8V OPERATION: Fully automatic STEPS: 10 FEATURES: TUNE mode provides stable power for reprogramming vehicle systems, demonstrating vehicles in the showroom, or retaining stored settings when battery cables are disconnected to fit powered accessories or replace the battery. USE: Indoor/outdoor (minimum temperature: -4°F / -20°C). INPUT POWER: Universal (100–240V 50–60Hz), high efficiency (CEC-listed), fully sealed. DESIGN: Weatherproof housing with wall mounts, a 6ft/180cm AC cable and 6ft/180cm charging cables terminated with SAE connectors. RECOVERY: Starts at a low voltage of 0.5V and features three-stage recovery and low-voltage testing SAFE: No risk of overcharging. Completely safe for vehicle electronics. Sparks are suppressed. Safe long-term battery maintenance. Automatic shut-off in the event of a short circuit or when the battery is disconnected. INCLUDES: Weatherproof battery cable & battery terminal set included. WARRANTY: 3-year limited replacement warranty.
OptiMate PORT O-97P12 – MagCode Clip Panel Mount – Magnetic battery charger connection – 12V
OptiMate PORT O-97P12 – MagCode Clip Panel Mount – Magnetic battery charger connection – 12VPremium specifications – 100 cm (40”) length, 15A fuse, -40° rated cable, 10A (13A max) current rating, panel mount. Provides a means of establishing a magnetic connection to the O-97C12. The connector features a rubber sealing cap to keep water out of the connection point when not in use.The OptiMate O-97P12 utilises the 12V MagCode® port to provide a short-circuit-proof, self-aligning magnetic battery charger connection. LENGTH: 40″/100cmCONNECTORS: 12V MagCode port to 5/16″ (M8) / 3/8″ (M10) ferrulesCABLE RATING: 16AWG (1.32 mm²) SPT2-WFUSE: 15AUSE: -40°C/-40°F low-temperature operationSTYLE: Panel mount with cover cap.WARRANTY: 3-year limited replacement warranty
OptiMate PORT O-97P24 – MagCode Clip Panel Mount – Magnetic battery charger connection – 24V
OptiMate PORT O-97P24 – MagCode Clip Panel Mount – Magnetic battery charger connection – 24VPremium specifications – 100 cm (40”) length, 15A fuse, -40° rated cable, 10A (13A max) current rating, panel mount. Provides a means of establishing a magnetic connection to the O-97C24. The connector features a rubber sealing cap to keep water out of the connection point when not in use.The OptiMate O-97P24 utilises the 24V MagCode® port to provide a short-circuit-proof, self-aligning magnetic battery charger connection.LENGTH: 40″/100cmCONNECTORS: 12V MagCode port to 5/16″ (M8) / 3/8″ (M10) ferrulesCABLE RATING: 16AWG (1.32 mm²) SPT2-WFUSE: 15AUSE: -40°C/-40°F low-temperature operationSTYLE: Panel mount with cover cap.WARRANTY: 3-year limited replacement warranty
Osram LEDguardian® Saver Light Plus - Multifunctional Safety Light
Osram LEDguardian® Saver Light Plus - Multifunctional Safety Light Prepared for any emergency situation LEDguardian SAVER LIGHT PLUS provides a reliable light during your travels, when camping and for inspection and maintenance work on your car. This multifunctional torch has a powerful LED light and non-slip, dirt-resistant surface. Thanks to the holder or three magnets included in the package, the light can be easily attached wherever you need it in the car or on the roof. Due its twelve yellow flashing LED lights the torch can be transformed into a reliable warning light in dangerous situations. In addition to this, this practical all-rounder offers reliable help as an emergency hammer to smash the windscreen and as a seat belt cutter.
Osram LEDinspect® 3-in-1 Inspection Light Kit - hand-inspection light
Versatile, 3-in-1 Kit with multiple modes for different tasksThe OSRAM LEDinspect™ 3-IN-1 INSPECTION LIGHT KIT is an innovative and adaptable lighting solution for users who need flexibility and performance. This multifunctional kit contains three interchangeable attachments - a flashlight, an inspection light and a gooseneck light - making it ideal for automotive, workshop and general inspection work. Each attachment has four lighting modes - high, medium, eco and flash - for different tasks. The powerful 500 lumen flashlight provides focused illumination for up to 2 hours on the High setting, while the 450 lumen inspection light offers wide illumination with an adjustable double joint that can be rotated 180° and 230° for precise positioning. The 160 lumen gooseneck light offers up to 7 hours of operation on the high setting and an adjustable spot-to-flood function for more versatility.
Osram LEDinspect® DUAL CHARGE PAD
LEDinspect DUAL CHARGE PAD The easiest way to recharge inspection lights Removing the need to find and connect the correct charging cable, OSRAM’s Wire-Free charging pad securely stores and recharges a pair of suitable inspection lamps, so they are ready when you are. This innovative design not only enhances convenience but also supports an uninterrupted workflow. Wire-Free Technology - Simply place a compatible work light on the charging pad to easily hold and rechargeFlexible mounting options - With strong magnets and screw holes built-in, you can easily attach the charging pad to toolboxes, workbenches and moreBuilt to last - IK08 and IP20 rated to survive the rigors of the professional workshop*Compatible with OS LEDIL421 & OS LEDIL422