EXCALIBUR X3 Complete Car Audio set
Excalibur X3 Complete Car Audio set (BoomBox 1000W/ 2 Ch. Amplifier/ Cable set)Complete BASS kit with 12inch boombox - 1000 watts, 2-channel amplifier - 1000 watts and a complete cable set. This set is perfectly matched and easy to install.Subwoofer Specifications:Type: X12CRMS power: 300 WattPeak power: 1000 WattFrequency range: 25 ~ 250 HzDiameter: 12 inches (30 cm)Dimensions: 43 x 26.5/35.5 x 39 cm (W x D x H)Amplifier Specifications:Type: X500.2Number of channels: 2RMS power: 2 x 50 Watts (4 ohms)Peak power (total): 1000 watts (4 ohms)THD: < 0.1%Frequency Response: 20 Hz ~ 25.000 HzSignal to noise ratio (SNR): > 88 dBSensitivity: 150mV ~ 8VDimensions: 23 x 22.5 x 5.5 cm (L x W x H)Cable set specifications:Type: X8GASet includes:5m Blue power cable1m Silver power cable5.2m RCA cable5.2m Remote cable1 AGU Fuse holder1 AGU 60Amp fuse4x Cable terminals
Excalibur X500.2 – Amplifier – 2-Channel – 1000W – Black
The Excalibur X500.2 is a compact 2-channel amplifier with a peak power of 1000 watts. It delivers 2 × 50W RMS at 4 Ohms and 1 × 150W RMS in bridged mode. With adjustable high-pass and low-pass filters and a bass boost function, you can fine-tune the sound to your liking. The amplifier includes thermal and short-circuit protection for safe operation. Measuring 225 × 230 × 55 mm and weighing around 1.95 kg, it’s easy to install in various vehicles. Benefits: Flexible power options: 2 × 50W RMS at 4 Ohm or 1 × 150W bridged at 4 Ohm. Advanced sound control: Adjustable HPF/LPF and bass boost up to +12 dB. Compact and safe: Built-in protection against overheating and short circuits.
Excalibur X500.4 – Amplifier – 4-Channel – 2000W – Black
The Excalibur X500.4 is a 4-channel amplifier with a maximum power output of 2000W. It delivers 4 × 50W RMS at 4 Ohms and can be bridged to 2 × 150W RMS. With adjustable high-pass and low-pass filters and a bass boost function, you can fine-tune the sound to your preference. The X500.4 offers versatile connectivity for both speakers and subwoofers, making it a wide range of car audio setups. Benefits: Flexible configuration: Supports 4 speakers or a 2-speaker and subwoofer setup. Advanced sound control: Adjustable HPF and LPF with bass boost for optimal balance. Compact and powerful: Easy installation with dimensions of 300 × 230 × 55 mm. In the box: 1 × Excalibur X500.4 amplifier 1 × User manual Mounting hardware Specifications: Max power: 4 × 500W RMS power @ 4 Ohm: 4 × 50W RMS bridged @ 4 Ohm: 2 × 150W Frequency response: 20 Hz – 25 kHz Signal-to-noise ratio: >92 dB Sensitivity: 150 mV – 8 V Fuse: 2 × 20A Dimensions (W × D × H): 300 × 230 × 55 mm
Excalibur X572 – 5"" x 7"" (13 x 18cm) 2-Way Coaxial 450W Car Speakers
The Excalibur X572 is a 2-way coaxial car speaker with a size of 13 x 18 cm (5 x 7 inch). This speaker set delivers 80W RMS and 450W maximum power. Designed for clear sound reproduction with deep bass and crisp highs. Advantages: High power – With up to 450W, the X572 delivers powerful sound. Wide frequency range – Frequency response from 105 Hz to 20,000 Hz ensures detailed audio. Easy installation – With a mounting depth of 52 mm, it fits in many vehicles. What's in the box: 2x Excalibur X572 car speakers 2x speaker grills Mounting hardware Specifications: Size: 13 x 18 cm (5 x 7 inch) Power: 80W RMS / 450W max Impedance: 4 Ohm Sensitivity: 87 dB Frequency response: 105 Hz – 20,000 Hz Mounting depth: 52 mm Type: 2-way coaxial
Excalibur X600.2 – Amplifier – 2-Channel – 1200W – Silver
The Excalibur X600.2 is a 2-channel amplifier with a peak power output of 1200W. It delivers 2 × 60W RMS at 4 Ohms and can be bridged to 1 × 180W RMS. With adjustable high-pass and low-pass filters and a bass boost function, you can fine-tune your sound exactly the way you like it. Its compact design makes it easy to install in any setup. Benefits: Flexible configuration: 2 speakers or a single subwoofer in bridged mode. Advanced sound control: Adjustable HPF/LPF with bass boost for perfect sound tuning. Compact design: At 240 × 220 × 48 mm, easy to install in most vehicles. In the box: 1 × Excalibur X600.2 amplifier 4 × Mounting screws 1 × Spare fuse Specifications: Max power: 1200W RMS power @ 4 Ohm: 2 × 60W RMS bridged @ 4 Ohm: 1 × 180W Frequency response: 20 Hz – 20 kHz Signal-to-noise ratio: >85 dB Sensitivity: 150 mV – 8 V Variable HPF/LPF crossover Fuse: 25A Dimensions (W × D × H): 240 × 220 × 48 mm
Excalibur X600.4 – Amplifier – 4-Channel – 2400W – Silver
The Excalibur X600.4 is a powerful 4-channel amplifier with a peak output of 2400W. It delivers 4 × 60W RMS at 4 Ohms and can be bridged to 2 × 180W RMS. With Tri-mode configuration and adjustable filters, you can fine-tune the sound exactly to your liking. Benefits: Tri-mode configuration: Supports 4 speakers, 2 speakers + subwoofer, or 2 subwoofers. Adjustable filters: Tune the sound with high-pass, low-pass, and bass boost controls. Compact design: Measuring 240 × 220 × 48 mm, easy to install in any setup. In the box: 1 × Excalibur X600.4 amplifier 4 × Mounting screws 2 × Spare fuses Specifications: Max power: 2400W RMS power @ 4 Ohm: 4 × 60W RMS bridged @ 4 Ohm: 2 × 180W Frequency response: 20 Hz – 20 kHz Signal-to-noise ratio: >88 dB Sensitivity: 150 mV – 8 V Variable HPF/LPF crossover Fuse: 2 × 25A Dimensions (W × D × H): 240 × 220 × 48 mm
Excalibur X693 - 6"" x 9"" (16.4 x 23.4cm) 3-Way Coaxial 500W Car Speakers
The Excalibur X693 is a 3-way triaxial car speaker with a size of 6x9 inch (16.4 x 23.4 cm). This speaker set delivers 100W RMS and 500W maximum power. Designed for clear sound reproduction with deep bass and crisp highs. Advantages: High power – With up to 500W, the X693 delivers powerful sound. Wide frequency range – Frequency response from 50 Hz to 20,000 Hz ensures detailed audio. Easy installation – With a mounting depth of 75 mm, it fits most vehicles. What's in the box: 2x Excalibur X693 car speakers 2x speaker grills Mounting hardware Specifications: Size: 16.4 x 23.4 cm (6 x 9 inch) Power: 100W RMS / 500W max Impedance: 4 Ohm Sensitivity: 90 dB Frequency response: 50 Hz – 20,000 Hz Mounting depth: 75 mm Type: 3-way triaxial Woofer material: IMPP composite cone Midrange: 50 mm Mylar Tweeter: 30 mm Mylar
Extension spout angled for grease gun 15cm
Angled 150 mm. Without coupler.
Festoon 3D SuperLED Bulb 12V/1W White 10x31mm, single piece (8000K)
Festoon 3D SuperLED Bulb 12V/1W White 10x31mm, single piece (8000K) Not Canbus systems The latest LED technology are these new Toyoda Gosei LEDs, which produce a sincerely extreme light-output (120 Lumen / 8.000K) at only 1 Watt consumption. Due to the 3D design you're even ensured of a wide-angle light beam. Specifications: - Toyoda Gosei LED - Whole new long-life technology - 3D Design, wide-angle - Patented High-Power LED - Over heat protection scheme - Stabilizer inside - Low consumption, only 1 Watt - 8.000K light output - 120 Lumen Please note! This product is not equipped with an E-Mark and therefore it’s not allowed to use it as exterior lighting on public roads. The product may only be used as interior lighting and/or only be used at private property or a closed circuit.
Festoon 3D SuperLED Bulb 12V/1W White 10x36mm, single piece (8000K)
Festoon 3D SuperLED Bulb 12V/1W White 10x36mm, single piece (8000K) Not Canbus systems The latest LED technology are these new Toyoda Gosei LEDs, which produce a sincerely extreme light-output (120 Lumen / 8.000K) at only 1 Watt consumption. Due to the 3D design you're even ensured of a wide-angle light beam. Specifications: - Toyoda Gosei LED - Whole new long-life technology - 3D Design, wide-angle - Patented High-Power LED - Over heat protection scheme - Stabilizer inside - Low consumption, only 1 Watt - 8.000K light output - 120 Lumen Please note! This product is not equipped with an E-Mark and therefore it’s not allowed to use it as exterior lighting on public roads. The product may only be used as interior lighting and/or only be used at private property or a closed circuit.
Festoon 3D SuperLED Bulb 12V/1W White 10x42mm, single piece (8000K)
Festoon 3D SuperLED Bulb 12V/1W White 10x42mm, single piece (8000K) Not Canbus systems The latest LED technology are these new Toyoda Gosei LEDs, which produce a sincerely extreme light-output (120 Lumen / 8.000K) at only 1 Watt consumption. Due to the 3D design you're even ensured of a wide-angle light beam. Specifications: - Toyoda Gosei LED - Whole new long-life technology - 3D Design, wide-angle - Patented High-Power LED - Over heat protection scheme - Stabilizer inside - Low consumption, only 1 Watt - 8.000K light output - 120 Lumen Please note! This product is not equipped with an E-Mark and therefore it’s not allowed to use it as exterior lighting on public roads. The product may only be used as interior lighting and/or only be used at private property or a closed circuit.
Festoon Bulb 2Q SMD Xenon-Optics 10x37mm 12V, single piece, with CAN-bus resistance
Festoon Bulb 2Q SMD Xenon-Optics 10x37mm 12V, single piece, with CAN-bus resistance Please note! This product is not equipped with an E-Mark and therefore it’s not allowed to use it as exterior lighting on public roads. The product may only be used as interior lighting and/or only be used at private property or a closed circuit.
Festoon Bulb 2Q SMD Xenon-Optics 10x43mm 12V, single piece, with CAN-bus resistance
Festoon Bulb 2Q SMD Xenon-Optics 10x43mm 12V, single piece, with CAN-bus resistance Please note! This product is not equipped with an E-Mark and therefore it’s not allowed to use it as exterior lighting on public roads. The product may only be used as interior lighting and/or only be used at private property or a closed circuit.
Festoon Bulb 3Q SMD Xenon-Optics 11x37mm 12V, single piece, with CAN-bus resistance
Xenon-Look festoon lighting provides you with the absolutely brightest light for your car there is. The Xenon-Look lights emit a strong white light which creates the perfect clean look. Give your car a new modern look. The festoon lighting is equipped with 3 Samsung SMD’s. The Xenon-Look bulbs are supplied per 1 piece. For cars with a Canbus system, these Xenon-Look bulbs are suitable. This Xenon-Look emits bright white light. The Xenon-Look bulbs have an original shape, so they fit perfectly into your car. The Xenon-Look lights are also very energy efficient. Xenon-Look lights are much more durable than normal lights and because of the robust design these Xenon-Look bulbs last very long. Assembly: You can easily install and remove the Xenon-Look lights. On YouTube you can find numerous instructional videos to assist you. Should you want to have assistance when installing your Xenon-Look lights help you can always go to your dealer. Important: Canbus support. Please note! This product is not equipped with an E-Mark and therefore it’s not allowed to use it as exterior lighting on public roads. The product may only be used as interior lighting and/or only be used at private property or a closed circuit.
Festoon Bulb 3Q SMD Xenon-Optics 11x43mm 12V, single piece, with CAN-bus resistance
Xenon-Look festoon lighting provides you with the absolutely brightest light for your car there is. The Xenon-Look lights emit a strong white light which creates the perfect clean look. Give your car a new modern look. The festoon lighting is equipped with 3 Samsung SMD’s. The Xenon-Look bulbs are supplied per 1 piece. For cars with a Canbus system, these Xenon-Look bulbs are suitable. This Xenon-Look emits bright white light. The Xenon-Look bulbs have an original shape, so they fit perfectly into your car. The Xenon-Look lights are also very energy efficient. Xenon-Look lights are much more durable than normal lights and because of the robust design these Xenon-Look bulbs last very long. Assembly: You can easily install and remove the Xenon-Look lights. On YouTube you can find numerous instructional videos to assist you. Should you want to have assistance when installing your Xenon-Look lights help you can always go to your dealer. Important: Canbus support. Please note! This product is not equipped with an E-Mark and therefore it’s not allowed to use it as exterior lighting on public roads. The product may only be used as interior lighting and/or only be used at private property or a closed circuit.
Festoon Bulbs 10W/12V 11x39mm Blue (Coated), set of 2 pieces
Festoon Bulbs 10W/12V 11x39mm Blue (Coated), set of 2 pieces Please note! This product is not equipped with an E-Mark and therefore it’s not allowed to use it as exterior lighting on public roads. The product may only be used as interior lighting and/or only be used at private property or a closed circuit.
Festoon Bulbs 10W/12V 11x39mm Red (Coated), set of 2 pieces
Festoon Bulbs 10W/12V 11x39mm Red (Coated), set of 2 pieces Please note! This product is not equipped with an E-Mark and therefore it’s not allowed to use it as exterior lighting on public roads. The product may only be used as interior lighting and/or only be used at private property or a closed circuit.
Festoon LED Bulb 12V Xenon-Optics Blue 10x37mm, single piece
Festoon LED Bulb 12V Xenon-Optics Blue 10x37mm, single piece Please note! This product is not equipped with an E-Mark and therefore it’s not allowed to use it as exterior lighting on public roads. The product may only be used as interior lighting and/or only be used at private property or a closed circuit.
Festoon LED Bulb 12V Xenon-Optics White 10x31mm, single piece
Festoon LED Bulb 12V Xenon-Optics White 10x31mm, single piece Please note! This product is not equipped with an E-Mark and therefore it’s not allowed to use it as exterior lighting on public roads. The product may only be used as interior lighting and/or only be used at private property or a closed circuit.
Festoon LED Bulb 12V Xenon-Optics White 10x37mm, single piece
Festoon LED Bulb 12V Xenon-Optics White 10x37mm, single piece Please note! This product is not equipped with an E-Mark and therefore it’s not allowed to use it as exterior lighting on public roads. The product may only be used as interior lighting and/or only be used at private property or a closed circuit.
Festoon LED Bulb 12V Xenon-Optics White 10x42mm, single piece
Festoon LED Bulb 12V Xenon-Optics White 10x42mm, single piece Please note! This product is not equipped with an E-Mark and therefore it’s not allowed to use it as exterior lighting on public roads. The product may only be used as interior lighting and/or only be used at private property or a closed circuit.
Flexible Silicon Hose - Black - 76->76mm - Length 82mm
Flexible intake rubber black, diameter 76mm, length 82mm
Fog light Peugeot 206 excl. SW - Clear
Fog light Peugeot 206 excl. SW - Clear
Fog light covers/frames Tesla Model 3 2017- 'Aero' (Glossy Black ABS)
Fog light covers/frames Tesla Model 3 2017- 'Aero' (Glossy Black ABS) - Set of 2 pieces
Foil Application Scraper Set, set of 6-pieces
Foil Application Scraper Set, set of 6-pieces Consisting of: - 3 different types of synthetic scrapers - 1 rubber scraper - 1 cutting knife - 1 set replacement cutting blades
Foldable AutoBag 320L Black 105x80x45cm
Foldable Roof Bag 320 Litres 'I'm leaving for a holiday and I'm taking with me...' It's a thought that regularly crosses one's mind when the holiday season is around the corner once again. Naturally, the best solution is a roofbox, but where will you store it after the holidays? Exactly. With this in mind, has introduced this great new foldable roof bag. This black bag is universal, and will therefore fit every type of crossbeam. Its volume is 320 litres! Made from high-quality PVC-coated polyester. The roofbag can be shrunk when not completely filled. Specifications: - 320 litres - 105x80x45cm - 100% waterproof nylon and zipper - maximum load 50kg - side support for dimensional stability - Special UV-blocking and anti-freeze treatment - 600dx600d heavy polyester
Foliatec 'Chrome Out' Set Black Matt - Film strip 5cm x 15m
Foliatec 'Chrome Out' Set Black Matt - Window trim film 5cm x 15m Chrome is out! With the Chrome Out Set, chrome and trim strips disappear behind elegant matt black in no time. - self-adhesive foil strip (length 15 m, width 5 cm) - ideal for chrome and trim strips on cars - Blackline Look - can be fitted in 3D - simple self-assembly, tools included (squeegee and cutterknife) Application: The Chrome Out Set can be fitted in 3D and is easy to attach with heat gun and a squeegee. For detailed information, check the instruction manual! Frequently asked: Will the film stay in the car wash? Yes, the Chrome Out Set is made from a high-quality car wrapping film and is therefore also car washes. Does the film also stick to plastic? No, plastic components emit plasticizers, which negatively affect the adhesion of the film. In addition, most plastic components have a structure that reduces the adhesion of the film.
Foliatec Adhesive Remover 1x400ml
Foliatec Adhesive Remover 1x400ml The Adhesive Remover was specially developed for all adhesive remains on non-absorbent surfaces. - Easy, quick and effective - Squeegee included in the lid
Foliatec AirCaps valve cap set Aluminum - 4 pieces - 3 rubber rings
Foliatec AirCaps valve cap set Aluminum - 4 pieces - 3 rubber rings - fits for all valve types - no corroding possible
Foliatec AirCaps valve cap set Crystal Cube black - 4 pieces
Foliatec AirCaps valve cap set Crystal Cube black - 4 pieces - fits for all valve types - no corroding possible
Foliatec AirCaps valve cap set Skull black red eyes
Foliatec AirCaps valve cap set Skull black red eyes - fits for all valve types - no corroding possible
Foliatec Aluminum Race-mesh medium black 20x120cm - 1 piece 13mm x 6mm
Foliatec Aluminum Race-mesh medium black 20x120cm - 1 piece 13mm x 6mm - high quality anodised aluminium - easy to cut in size - universal size - free registration