Carpoint Battery Float Charger 12V
Carpoint battery charger diagnoses, repairs, charges and maintains 12V lead and gel batteries (WET, MF, AGM, GEL). Specially designed to maintain battery voltage for long periods of time and ideal when storing motorhomes, motorbikes, etc. Starts charging as soon as the battery voltage drops below a certain value and stops charging as soon as it rises above an acceptable value. With protection against overcharging, overheating and short circuits. Dust- and splash-proof. Technical data: Input voltage AC: 220-240V, 50/60Hz, 50/60Hz Output voltage: 12V Input Current: 0.6A RMS max. Charge Voltage: 14.4V±0.25V or 14.7V±0.25V or 14.7V±0.25V Charge Current: 3.8A±10% or 0.8A±10% Current: 3.8A±10% or 0.8A±10% Battery capacity: 1.2-120Ah Battery type: 12V lead-acid batteries (WET, MF, AGM and GEL) Battery capacity: 1.2-120Ah Dimensions: 172x62x42mm (LxWxH) Weight: 0.486kg Noise level: <50dB (from a distance of 50cm) Housing: IP65 (dustproof and water-resistant) Indoor use
Carpoint Battery Terminal Clamps + en -
Use the Carpoint battery terminal clamps to attach wiring to vehicle batteries. The two clamps, one for the minus pole and one for the plus pole, fit DIN battery terminals. The minus terminal has a diameter of 16 mm and the plus terminal has a diameter of 18 mm.
Carpoint Battery Tester Professional
The professional Carpoint battery tester is designed to test the status and condition of 6 and 12 Volt lead-acid batteries of cars, vans, 4x4 and agricultural vehicles. The meter indicates the condition through colour coding. The compact and portable battery tester has a strong steel construction with handle and clamp holders. The battery tester is equipped with semi-insulated battery terminals. Safe to use and spark-free.
Carpoint Beaded Cushion Classic 126x39cm
Make the car ride extra comfortable with this Carpoint wooden beaded pillow Classic. The beaded pillow is universal and fits easily in any car seat. The wooden beads have a ventilating and massaging effect that stimulates circulation. Thanks to the ventilating effect, this wooden beaded seat is wonderfully cool in summer. The size of this camel-coloured cushion is 126 x 39 cm.
Carpoint Beaded Cushion Deluxe 94x44cm
Grey. With velvet border. 94 x 44 cm.
Carpoint Bike Carrier Tow Bar with Number Plate Holder
With the universal Towbar Bike Carrier with Number Plate Holder, you can safely transport bicycles on the back of your car. The carrier is transporting 2 bicycles with a maximum weight of 30 kg. The bicycle rack is therefore also transporting heavier bicycles.
Carpoint Blade Fuse Holder Bypass 12V
This Carpoint blade Bypass fuse holder is suitable to connect an additional 12 Volt accessory fused without changing the wiring. In the fuse box you can replace the original fuse with this blade fuse holder, the released fuse will be put back in this holder.
Carpoint Blade Fuse Kit 7.5-30A 6-pieces
Carpoint assorted packaging with blade fuses. The set consists of six different blade fuses with 7.5, 10, 15, 20, 25 and 30 amps. Always replace the defective blade fuse with a fuse of the same value or colour or as indicated in the fuse box. The fuses are supplied in a blister pack.
Carpoint Booster Cable Set 16mm² Insulated Grip
These Carpoint booster cables are the solution when the car won't start due to a dead battery. use with 12 and 24 volt batteries. The jumper cables are colour coded (red and black) and have a length of 3 metres. For petrol cars with displacement up to 2500cc. Cable thickness of 16mm² with metal clamps and insulated handles. Tip: Keep Carpoint booster cables in the supplied carrying bag in the car so you always have the cables at hand.
Carpoint Booster Cable Set 16mm² TUV/GS/DIN72553
These Carpoint booster cables are the solution when the car won't start due to a dead battery. use with 12 and 24 volt batteries. The jumper cables are colour coded (red and black) and have a length of 3 metres. For petrol cars with displacement up to 2500cc. Cable thickness of 16mm² with fully insulated clamps and with TüV/GS product certification. Tip: Keep Carpoint booster cables in the supplied carrying bag in the car so you always have the cables at hand.
Carpoint Booster Cable Set 200A Insulated Grip
These Carpoint booster cables are the solution when the car won't start due to a dead battery. use with 6, 12 and 24 volt batteries. The jumper cables are colour coded (red and black) and have a length of 2.50 metres. Maximum load up to 200 amps, with metal clamps and insulated handles. Tip: Keep Carpoint booster cables in the supplied carrying bag in the car so you always have the cables at hand.
Carpoint Booster Cable Set 25mm² Insulated Grip
These Carpoint booster cables are the solution when the car won't start due to a dead battery. use with 12 and 24 volt batteries. The jumper cables are colour coded (red and black) and have a length of 2.5 metres. For petrol cars with displacement up to 5500cc and diesel engines up to 3000cc. Cable thickness of 25mm² with metal clamps and insulated handles. Tip: Keep Carpoint booster cables in the supplied carrying bag in the car so you always have the cables at hand.
Carpoint Booster Cable Set 25mm² TUV/GS/DIN72553
These Carpoint booster cables are the solution when the car won't start due to a dead battery. use with 12 and 24 volt batteries. The jumper cables are colour coded (red and black) and have a length of 3.50 metres. For petrol cars with displacement up to 2500cc. Cable thickness of 25mm² with fully insulated clamps and with TÜV/GS product certification. Tip: Keep Carpoint booster cables in the supplied carrying bag in the car so you always have the cables at hand.
Carpoint Booster Cable Set 35mm² Insulated Grip
These Carpoint booster cables are the solution when the car won't start due to a dead battery. use with 12 and 24 volt batteries. The jumper cables are colour coded (red and black) and have a length of 3.5 metres. For petrol cars with displacement up to 7000cc and diesel engines up to 4000cc. Cable thickness of 35mm² with metal clamps and insulated handles. Tip: Keep Carpoint booster cables in the supplied carrying bag in the car so you always have the cables at hand.
Carpoint Booster Cable Set 35mm² TUV/GS/DIN72553
These Carpoint booster cables are the solution when the car won't start due to a dead battery. use with 12 and 24 volt batteries. The jumper cables are colour coded (red and black) and have a length of 4.50 metres. For petrol cars with displacement up to 7000cc and for diesel engine cars up to 4000cc. Cable thickness of 35mm² with fully insulated clamps and with TüV/GS product certification. Tip: Keep Carpoint booster cables in the supplied carrying bag in the car so you always have the cables at hand.
Carpoint Booster Cable Set 400A Insulated Grip
These Carpoint booster cables are the solution when the car won't start due to a dead battery. use with 6, 12 and 24 volt batteries. The jumper cables are colour coded (red and black) and have a length of 3 metres. Maximum load up to 400 amps, with metal clamps and insulated handles. Tip: Keep Carpoint booster cables in the supplied carrying bag in the car so you always have the cables at hand.
Carpoint Booster Cable Set 500A Safety Plug
Carpoint jumper cables with yellow safety plug with polarity indication. This allows you to always connect the jumper cables to the correct poles. The jumper cable consists of two parts and are colour coded (red and black) with a yellow safety plug with LED indication at each end. Tip: Keep Carpoint jumper cables in the supplied carrying bag in the car so you always have the jumper cables at hand.
Carpoint Boot Mat Rubber Universal
100% natural rubber. Universal, can be cut in appropriate size. Protects your booth from dirt, mud, snow and moisture. Convenient to carry any kind of load in your car. 139x108cm.
Carpoint Boot Protector Tow Bar Lock
Striking red metal Carpoint lock to attach to the tow bar to secure rear doors of vans or the boot of station wagons. The lock prevents unauthorised opening. This prevents expensive tools or equipment from being stolen from the van or station wagon. After installation, the lock barricades the access to the loading space. The tow bar lock can remain on the tow bar while driving. The solid lock has a height of 26cm and a width of 41cm. several vans like: Mercedes Vito (without step) Mercedes Sprinter (with step in bumper) VW Transporter VW Crafter (with step) VW Caddy Renault Traffic Renault Master Nissan Primastar Opel Vivaro Ford Transit
Carpoint Brake-Away Cable for Overrun Brake 110cm 1000N/98kg
The Carpoint breakaway cable between car and caravan or trailer is an additional safety device for stationary trailers and caravans and ensures that the brake is applied when the caravan or trailer is detached from the car. The cable breaks when the handbrake is applied.
Carpoint Built-in Connector USB-A/USB-C 65W Fast Charger
Carpoint in-vehicle charging port with USB-A and USB-C connectors, featuring Quick Charging (QC) and Power Delivery (PD) technology. cars, vans, motorcycles, boats, RVs, and trailers with 12- and 24-volt power systems. Charge up to 5 times faster with the Quick Charging USB 3.0 port, which supports charging power up to 18 watts, and a Power Delivery USB-C port with charging power up to 65 watts. Use the waterproof dust cap to protect the connector when not in use. Comes with a power cable with a fuse and extra fuses.
Carpoint Built-In Socket ISO 4165 12V 20A
Carpoint 12 Volt recessed socket with dust cover the standard 21mm cigarette lighter plug. Hole diameter of 30mm and a built-in depth of 50mm. To be connected with a solder joint or cable lugs.
Carpoint Built-In Socket 12V 10A
Carpoint 12 Volt recessed socket with dust cover the standard 21mm cigarette lighter plug. With a hole diameter of 28mm and a recessed depth of 75mm. To be screwed in with the screws provided and 40mm centre distance. Colour coded cables with a length of 95cm with a 10 amp floating fuse in the plus cable.
Carpoint Butt Splice Terminals 545 Red Blister 10-pieces
545. 4,0 mm. 22,7mm. Red. 10 pieces in blister.
Carpoint Butt Splice Terminals 546 Blue 10-pieces
546. 4,5mm. 22,7mm. Blue. 10 pieces.
Carpoint Butt Splice Terminals 546 Blue Blister 10-pieces
546. 4,5mm. 22,7mm. Blue. 10 pieces in blister.
Carpoint BX-1D 12V Battery Charger 3.8 Ampère Lithium
This Carpoint BX-1D battery charger is charging 12-volt with 1.2 to 120 amp rechargeable lead-acid batteries and 10-80 amp lithium batteries. The battery charger goes through a fully automatic charging cycle in 7 steps. Diagnostic phase, checks the condition of the battery and/or it can accept the charge. Soft start phase, restores severely discharged batteries of more than 3Volt under low charge condition. Recovery phase, severely discharged battery with more than 7.5Volts can be recovered. Bulk phase, maximum charging current of 80% of energy is charged. Absorption phase, charging until almost 100% is reached. Analysis phase, checking the state of charge. Float phase, battery fully charged and maintained at maximum level with low charge current. Maximum charging current 3.8 amps. The CP-1D battery charger comes with two different colour coded cables. One cable equipped with battery terminals for charging disconnected batteries and one cable with eye terminals (Ø6.3mm) and 10 Amp fuse for permanently connected batteries . Both cables are equipped with a quick connector. Clear display with: mode key to switch between normal battery, small battery, Lithium or Calcium mode, Check indicator lights for error messages, reverse polarity. Charge indicator lights fully charged or ready to use. Technical data: * AC input voltage: 220-240VAC 50Hz * Output voltage: Rated: 12V * Input current: Maximum 0.6A RMS * Minimum battery voltage: >3.0V * Output power: 57W * Efficiency: 80% * Charge current: Maximum 3.8A * Return current: <10 mA * Standby power: < 1W * Ambient temperature: 0°C to 40°C * Charger type: Seven steps, fully automatic, multi-mode charging * Battery types: 12V rechargeable acid-lead batteries (WET, MF, VRLA, AGM and GEL and Calcium) Lithium: 12.8V, 4 cells LiFePO4 * Battery capacity: lead-acid batteries 1.2-120Ah (charging) Lithium 10-80Ah * Dimensions (l x w x h): 188.6x62.3x48.8mm * Protection housing: IP65 (dust and splash proof) for indoor use only * Weight: 0.7kg * Noise level: <50 dB (tested at a distance of 50 cm)
Carpoint BX-2D 12V/24V Battery Charger 7.5 Ampère Lithium
This Carpoint BX-2D battery charger is charging 12 and 24 Volt with 10 to 240 amp rechargeable lead-acid batteries and 10-80 amp lithium batteries. The battery charger goes through a fully automatic charging cycle in 8 steps. Diagnostic phase, checks the condition of the battery and/or it can accept the charge. Recovery and soft start phase, restores severely discharged batteries of more than 2 volts under low charge condition or pulse charging. Fast charge phaseRecovers severely discharged batteries with high charge voltage. Bulk phase, maximum charging current of 80% of the energy is charged. Absorption phase, charging until almost 100% is reached. Analysis phase, checking the state of charge. Float phase, battery fully charged and maintained at maximum level with low charge current. Maximum charging current 7.5 amps. The CP-2D battery charger comes with two different colour coded cables. One cable equipped with battery terminals for charging disconnected batteries and one cable with eye terminals (Ø6.3mm) and 10 Amp fuse for permanently connected batteries . Both cables are equipped with a quick connector. Clear display with: mode key to switch between different battery types and amps, fast charge mode. Control indicator lights for error messages and reverse polarity and power supply mode. Indication lights for fully charged or ready to use. Technical data: * Input voltage AC: 220-240VAC 50Hz * Output voltage: Rated: 12V/24V * Input current: Maximum 1.33A RMS * Minimum battery voltage: >2.0V * Output power: 110W * Efficiency: 80% * Charging current: 7.5A 12 Volt battery / 3.75A 24 Volt battery /5A for 13.6V Power Supply * Return current: <10 mA * Standby power: < 1W * Ambient temperature: 0°C to 40°C * Charger type: Eight step, fully automatic, multi-mode charging * Battery types: 12V rechargeable acid-lead batteries (WET, MF, VRLA, AGM and GEL and Calcium) Lithium: 12.8V, 4 cells LiFePO4 * Battery capacity: Lead acid batteries 12Volt 18-240Ah / 24 Volt 10-120Ah / Lithium 10-80Ah * Dimensions (l x w x h): 219.3x90.8x60.8mm * Protection housing: IP65 (dust and splash proof) for indoor use only * Weight: 0.95kg * Noise level: <50 dB (tested at a distance of 50 cm)
Carpoint BX-4M 6V/12V Battery Charger 1 Ampère
This Carpoint BX-4M battery charger is charging 6 and 12 volt 1.2 to 20 amp lead-acid batteries. The battery charger goes through a fully automatic charging cycle in 5 steps: Recovery phase, highly discharged battery can be restored. Bulk phase, maximum charging current of 80% of energy is charged. Absorption phase, charging until almost 100% is reached. Analysis phase, Checking the state of charge. Float phase, Battery fully charged and maintained at maximum level with low charge current. Charge current is 1 amp maximum. The CP-4M battery charger comes with two different colour coded cables. One cable equipped with battery terminals for charging disconnected batteries and one cable with eye terminals (Ø6.3mm) and 10 Amp fuse for permanently connected batteries . Both cables are equipped with a quick connector. Clear display with: mode key to switch between 6 and 12 Volts, Control indicator lights (Error message and 6 or 12 Volt mode), Charge indicator lights in which of the 5 steps in the charging cycle is charging. Technical data: * Input voltage AC: 220-240VAC 50Hz * Output voltage: Nominal: 6V / 12V * Input current: Maximum 0.18A RMS * Minimum battery voltage: >2.5V * Output power: 14.4W * Efficiency: 80% * Charge current: 1A maximum * Return current: <10 mA * Standby power: < 1W * Ambient temperature: 0°C to 40°C * Charger type: Five-step, fully automatic, multi-mode charging * Battery types: 6V / 12V rechargeable acid-lead batteries (WET, MF, VRLA, AGM and GEL) * Battery capacity: 1.2-20Ah * Dimensions (l x w x h): 109.4x65x38.5mm * Protection housing: IP20 (dust-free) for indoor use only * Weight: 0.35kg * Noise level: <50 dB (tested at a distance of 50 cm)
Carpoint BX-5M 12V/24V Battery Charger 25 Ampère Lithium
This Carpoint BX-5M battery charger is charging 12 and 24 Volt 50-500 amp (12V) and 25-100 amp (24V) rechargeable lead acid batteries and 25-100 amp lead calcium batteries and 12 Volt 50-500 amp Lithium-ion batteries. The battery charger goes through a fully automatic charging cycle in 9 steps. Diagnosis and bulk charge phase, checks the condition of the battery and in case of severely discharged batteries, the battery is charged with pulse charging with high and low current to restore the battery. Bulk phase, maximum charging current of 80% of the energy is charged. Absorption phase, charging until almost 100% is reached. Analysis phase, checking the state of charge. Drip charging phase, battery is maintained at maximum level. Maintenance charge phase, starts when battery voltage falls below certain level. Quick charge phase, restores severely discharged batteries with high charge voltage. Manual special maintenance phase, With constant voltage and current, trickle charging is performed. Power supply phase, Used as power supply with maximum capacity when output voltage becomes lower than 12V. Maximum charging current 25 amps. The CP-5M battery charger is supplied with two different colour-coded cables. One cable equipped with battery clamps for charging disconnected batteries and one cable with eye terminals (Ø8.5mm) for permanently connected batteries. Both cables are equipped with a quick connector. Clear display with: mode key to switch between different battery types and between amp/voltage and percentage charge. Indicator lights for error messages. Further equipped with quick charge and memory function, night charge mode and power mode. Technical data: * Input voltage AC: 220-240VAC 50/60Hz * Output voltage: Rated: 12V/24V * Input current: Maximum 4A RMS * Minimum battery voltage: >4.5V * Output power: 320W * Efficiency: 75% * Charge current: 25A 12 Volt battery/ 12.5A 24 Volt battery/ 5A Lead-Calcium battery/ 25A Lithium-Ion battery/ 12.5A for 13.6V Power Supply * Return current: <5 mA * Cooling: Fan * Ambient temperature: 0°C to 40°C reduced output power at higher tempratures * Charger type: Nine step, fully automatic, Switching mode with maintenance charge * Battery types: 12 and 24V rechargeable acid-lead batteries (WET, MF, VRLA, AGM and GEL) 12V lead-calcium and Lithium-Ion batteries * Battery capacity: 50-500Ah (12V) 25-250Ah (24V) 25-100Ah (12V lead-calcium batteries) 50-500Ah (12V Lithium-Ion batteries) * Dimensions (l x w x h): 260x135x70mm * Protection housing: IPX4 (splash-proof) * Weight: 2.6kg * Noise level: <50 dB (Night mode, tested at a distance of 50 cm)
Carpoint BX-6 Battery Charger 16A / 4 Bank
This Carpoint BX-6 battery charger is simultaneously charging up to four 12 Volt 1.2-120Ah rechargeable lead-acid batteries. The battery charger goes through a fully automatic charging cycle in 5 steps. Diagnosis and bulk charging, automatically checks battery charge status and starts pulse charging. Bulk phase, maximum charging current of 80% of energy is charged. Absorption phase, charging until almost 100% is reached. Drip charging phase, battery is maintained at maximum level. Maintenance charge phase, starts when battery voltage drops below certain level. Maximum charging current 16 amps. The CP-6 battery charger comes with four cable sets to charge batteries, all sets have two different colour coded cables equipped with battery terminals. All cables are equipped with a quick disconnect. Four separate displays for each battery to be charged, each display has a mode key to switch between different different charging modes and control LED indicator lights for incorrect polarity and four LED lights indicating charging percentage (25/50/75 or 100% full). Technical data: * AC input voltage: 220-240VAC 50/60Hz * Output voltage: Rated: 12V * Starting current: <25A (no AC input) * Input current: Maximum 2.4A RMS * Efficiency: 75% * Charging voltage: 14.4V +/-0.25V or 14.7V +/- 0.25V * Charging current: 16mp (4.0A +/-10% or 0.8A +/-10% per Bank) * Drain leakage current: <5mA * Ripple: Max 150mV * Ambient temperature: -20°C to 40°C lower output current at higher tempratures * Charger type: Fully automatic five-step switching mode with maintenance current * Battery type: 12V Lead-acid rechargeable batteries (NAT, MF, AGM and GEL) * Bank Configuration: Quadruple * Number of batteries that can be charged simultaneously: 4 (disconnect serial wiring during charging) * Battery capacity: 1.5-120Ah * Dimensions (l x w x h): 260x246x63mm * Protection housing: IP64 (Dust and splash-proof) for outdoor use * Weight: 2.3kg * Noise level: <50 dB (At a distance of 50cm)
Carpoint Can Holder 2-pieces
With the Carpoint can holder, you always have a place to put away cans or bottles without spilling. The plastic can holder hangs easily and securely between the window and door frame, after use the holder can be easily removed from the window and door frame. The height of the holder is 13 cm and the diameter is 7 centimetres. The holder fits 250ml, 330ml cans or small 500ml bottles. Comes in sets of two.
Carpoint Canbus LED Adapter 13>7 pin
For new vehicles with a Canbus connection, the problem with connecting a trailer or bicycle rack with LED lighting is that the on-board computer of the towing vehicle displays an error message. This Carpoint LED Canbus converter solves malfunctions or other error messages, when used in combination with a car and a trailer or bike carrier with LED lighting. The Carpoint Canbus adapter communicates with the Canbus system of the base vehicle. The adapter has a 13-pole connection to a 7-pole connection and can easily be placed between the connection of the car and the trailer or bike carrier.