Grill passend voor VW Golf 3 Hofele

Moet opnieuw gespoten worden

Grill passend voor VW Polo 9N GTI 05-09

Grill without logo VW Bora black

Grill zonder logo, zwart. Eenvoedig zelf te monteren. Spuit klaar Inclusief montagemateriaal

Grill without logo VW Golf III in Golf IV look black

Grill zonder Embleem VW Golf 3 in Golf 4 look zwart Grill zonder logo, zwart. Eenvoedig zelf te monteren. Inclusief montagemateriaal  

Grill without logo VW Golf V

Grill zonder Embleem Volkswagen Golf 5 2 Ribben Motorkapvuller Prijs per stuk  

Grill without logo VW Passat 3C 05- black

Grill zonder logo, zwart, voor auto zonder parktronic Eenvoedig zelf te monteren. Spuit klaar Inclusief montagemateriaal

Grill zonder Embleem Seat Leon 1P 05-09

  Grill zonder Embleem Seat Leon 1P 05-09   Eenvoudig zelf te monteren. Hoogwaardig ABS Inclusief montagemateriaal

GT Momentum Air intake BMW 330i (G20) 430i (G22/G23) 2.0L (t) B48

GT Momentum Air intake BMW 330i (G20) 430i (G22/G23) 2.0L (t) B48 BMW 320i/330i (G20) 19-21 2.0L (t) B48BMW 420i/430i (G22/23) 19-21 2.0L (t) B48 * Dyno-bewezen winsten tot +11 HP & +12 Lbs. x Ft. TQ * Uitstroom fabrieksinname met 6% gemeten stroom: 155 CFM @ 7 " * H20 wasbaar en herbruikbaar Pro 5R-luchtfilter voor maximale prestaties Helder kijkvenster voor handige filterinspectie zonder demontage Innovatieve filter-naar-behuizing-interface en minimale hardware voor snelle en eenvoudige installatie Maakt gebruik van fabrieksmontagelocaties voor een eenvoudige en veilige installatie

GTI SPOILER set GOLF III 91-97

GTI SPOILER SET GOLF III 91-97 Bouwjaar: 91-97 Opmerkingen: HD Vervangingsdelen zijn vervangingsdelen van A-Kwaliteit, van de beste merken zoals Hella, Valeo, Depo, enz. De specificaties zijn OEM en worden zowel gebruikt bij de merkdealers als bij het universele garage bedrijf. Vergelijk het getoonde product goed met hetgeen u nodig heeft, controleer bouwjaar, type en eventueel andere vermelde gegevens om een teleurstelling te voorkomen.   Levertijd 1 à 2 werkdagen

H&R Height Adjustable Spring System Volkswagen Transporter T5/T6/T6.1 FA45/60/RA20-50mm

H&R Height-Adjustable Spring Systems for VW Transporter T5, T6 & T6.1 – Sporty Lowering with OEM Comfort Experience maximum performance and sporty styling with the H&R height-adjustable spring systems – specially developed for the Volkswagen Transporter, Multivan, and California models of the T5, T6, and T6.1 series. These innovative spring systems allow variable lowering while maintaining full compatibility with factory adaptive or electronically adjustable dampers. Advantages of H&R Height-Adjustable Spring Systems Individually adjustable lowering in the range front axle 45–60 mm / rear axle 20–50 mm Sporty appearance and improved road handling Retains full OEM damper functionality – no performance loss Suitable with or without adaptive damping control Compatible with Standard, Dynamic, and Sport suspension setups Not suitable for rough-road suspension Optimized driving dynamics for more precise handling Supplied with TÜV-approved certificate (Teilegutachten) No modification of vehicle electronics required Important Note Depending on engine type, transmission, equipment level, and vehicle tolerances, the actual lowering may vary from the stated values. Compatibility The H&R height-adjustable spring systems are suitable for the following models: Volkswagen Transporter / Multivan / California T5 (7HM, 7HC, HK, 7HKX0, 7J0, 7HMA, 7HCA) Model years: 2003–2015 • 2WD/4WD • incl. Dynamic/Sport suspension • without rough-road suspension Lowering: Front 60 mm / Rear 20–50 mm Volkswagen Transporter / Multivan / Kombi / California / California Beach T6 (7HC, 7HMA, 7J0) Model years: 2015–2020 • 2WD/4WD • incl. Dynamic/Sport suspension • without rough-road suspension Lowering: Front 60 mm / Rear 20–50 mm Volkswagen Transporter / Multivan / Kombi T6.1 (7HC, 7J0) Model years: from 2020 • 2WD/4WD • incl. Dynamic/Sport suspension • without rough-road suspension Lowering: Front 45 mm / Rear 20–50 mm Volkswagen California / California Beach T6.1 (7HMA) Model years: from 2020 • 2WD/4WD • incl. Dynamic/Sport suspension • without rough-road suspension Lowering: Front 60 mm / Rear 30–50 mm Conclusion With the H&R height-adjustable spring systems for the VW Transporter T5, T6, and T6.1, you combine sporty design, precise handling, and maximum ride comfort. Perfect for drivers who want individual lowering without compromising comfort.

H&R Lowering Springs Alfa Romeo MiTo/Fiat Grande Punto/Evo/Opel Corsa D/E from 851kg FA-Load 2005- FA20-35/RA20-35mm

H&R Lowering Springs Alfa Romeo MiTo/Fiat Grande Punto/Evo/Opel Corsa D/E from 851kg FA-Load 2005- FA20-35/RA20-35mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Alfa Romeo MiTo including Quadrifoglio Verde Type 955, from 851kg Front axle load 2008- Front axle 30mm/Rear axle 30mmFiat Grande Punto/Evo including Racing Type 199, from 851kg Front axle load, including Abarth, with ABE 2005- Front axle 35mm/Rear axle 35mmOpel Corsa D including OPC Type S-D, from 851kg Front axle load, with ABE 2006- Front axle 35mm/Rear axle 35mmOpel Corsa E Type S-D, from 861kg Front axle load, with ABE 2014- Front axle 20mm/Rear axle 20mm

H&R Lowering Springs BMW 3-Series E21 4/6-Cylinder -1982 FA35/RA35mm

H&R Lowering Springs BMW 3-Series E21 4/6-Cylinder -1982 FA35/RA35mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:BMW 3-Series E21 Type 3 4/6-Cylinder -1982 Front axle 35mm/Rear axle 35mm

H&R Lowering Springs BMW 5/6-Series F10 Sedan/F06 Gran Coupé 2/4WD 2010- FA30-35/RA15-35mm

H&R Lowering Springs BMW 5/6-Series F10 Sedan/F06 Gran Coupé 2/4WD 2010- FA30-35/RA15-35mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:BMW 5-Series F10 Sedan Type 5L, 2/4WD, exclusive 535dx/550i-ix-d, with ABE 2010- Front axle 35mm/Rear axle 35mmBMW 6-Series Gran Coupé F06 Type 6C, 2WD, with ABE 2012- Front axle 30mm/Rear axle 15mm

H&R Lowering Springs Ford Fiesta 2002- FA35/RA35mm

H&R Lowering Springs Ford Fiesta 2002- FA35/RA35mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Ford Fiesta Type JH1/JD3, exclusive ST150/Sport 2002- Front axle 35mm/Rear axle 35mm

H&R Lowering Springs Mercedes A-Class W177 4WD 2018- & CLA C118 2WD 2019- FA30/RA30mm

H&R Lowering Springs Mercedes A-Class W177 4WD 2018- & CLA C118 2WD 2019- FA30/RA30mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Mercedes A-Class W177 Type F2A, 4WD, Only for cars with the original comfort suspension and original lowering, Only for multilink rear axle, inclusive adaptive shocks 2018- Front axle 30mm / Rear axle 30mm Mercedes CLA C117 Type F2CLA, 2WD, Only for multilink rear axle, inclusive adaptive shocks 2019- Front axle 30mm / Rear axle 32mm

H&R Lowering Springs Mercedes A-Class W177 A35/A45/A45s AMG 2018- FA25/RA15mm

H&R Lowering Springs Mercedes A-Class W177 A35/A45/A45s AMG 2018- FA25/RA15mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Mercedes A35/A45/A45s AMG Type F2A, with/without adaptive shocks (AMG Ride Control) 2018- Front axle 25mm / Rear axle 15mm

H&R Lowering Springs Mercedes A-Class W177/ 2WD 2018- FA25/RA25mm

H&R Lowering Springs Mercedes A-Class W177/ 2WD 2018- FA25/RA25mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Mercedes-Benz A-Class W177 Type F2A, 2WD, except for adaptive shock system, only for cars with the original comfort suspension, Only for multi-link rear axle 2018- Front axle 25mm / Rear axle 25mm

H&R Lowering Springs Mercedes CLA C118 2WD 2019- FA25/RA20mm

H&R Lowering Springs Mercedes CLA C118 2WD 2019- FA25/RA20mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Mercedes CLA C117 Type F2CLA, 2WD, Only for cars with the original comfort suspension and original lowering, Only for multilink rear axle, exclusive adaptive shocks 2019- Front axle 25mm / Rear axle 20mm

H&R Lowering Springs Mercedes CLA C118 4WD 2019- FA30/RA20mm

H&R Lowering Springs Mercedes CLA C118 4WD 2019- FA30/RA20mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Mercedes CLA C117 Type F2CLA, 4WD, Only for cars with the original comfort suspension and original lowering, inclusive adaptive shocks 2019- Front axle 30mm / Rear axle 20mm

H&R Lowering Springs Mercedes CLA35/45/45s AMG & A35 AMG Sedan 2019- FA25/RA15mm

H&R Lowering Springs Mercedes CLA35/45/45s AMG & A35 AMG Sedan 2019- FA25/RA15mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Mercedes CLA35 AMG Type F2CLA, with adaptive shocks (AMG Ride Control) 2019- Front axle 25mm / Rear axle 15mmMercedes CLA45/CLA45s AMG Type F2CLA, with adaptive shocks (AMG Ride Control) 2019- Front axle 30mm / Rear axle 15mmMercedes A35 AMG Sedan Type F2A, with adaptive shocks (AMG Ride Control) 2019- Front axle 25mm / Rear axle 15mm

H&R Lowering Springs Mercedes W201 1.8/2.0L 1982-1993 FA45/RA45mm

H&R Lowering Springs Mercedes W201 1.8/2.0L 1982-1993 FA45/RA45mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Mercedes-Benz W201 190/190E, 1.8/2.0L 1982-1993 Front axle 45mm/Rear axle 45mm

H&R Lowering Springs Mercedes-Benz A-Class W177 2WD 2018- FA25/RA25mm

H&R Lowering Springs Mercedes-Benz A-Class W177 2WD 2018- FA25/RA25mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Mercedes A-Class W177 Type F2A, 2WD, Only for multilink rear axle, Only with adaptive shocks 2018- Front axle 25mm / Rear axle 25mm

H&R Lowering Springs Mercedes-Benz A-Class W177 2WD 2018- FA35/RA35mm

H&R Lowering Springs Mercedes-Benz A-Class W177 2WD 2018- FA35/RA35mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Mercedes A-Class W177 Type F2A, 2WD, Only for cars with twist beam rear axle, Only for cars with comfort suspension without OE lowering, Except adaptive shocks 2018- Front axle 35mm / Rear axle 35mm

H&R Lowering Springs Mercedes-Benz A-Class W177/V177 2WD 2018- FA25/RA25mm

H&R Lowering Springs Mercedes-Benz A-Class W177/V177 2WD 2018- FA25/RA25mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Mercedes-Benz A-Class W177 Type F2A, 2WD, except for adaptive shock system, only for cars with the original comfort suspension and original lowering, Only for multi-link rear axle 2018- Front axle 25mm / Rear axle 25mm

H&R Lowering Springs Seat Ibiza Cupra/-FR/Volkswagen Polo GTI/Edition 2002- FA30-35/RA30-35mm

H&R Lowering Springs Seat Ibiza Cupra/-FR/Volkswagen Polo GTI/Edition 2002- FA30-35/RA30-35mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Seat Ibiza Cupra/-FR Type 6L, only for Cupra/-FR, with ABE 2002- Front axle 30-35mm/Rear axle 30-35mmVolkswagen Polo GTI+Edition Type 9N 2006- Front axle 30-35mm/Rear axle 30-35mm

H&R Lowering Springs Seat Leon Cupra/Cupra R/Volkswagen Golf VII Sedan/GTD/GTI/TCR from 1011kg FA-Load 2012-FA25-45/RA25-45mm

H&R Lowering Springs Seat Leon Cupra/Cupra R/Volkswagen Golf VII Sedan/GTD/GTI/TCR from 1011kg FA-Load 2012-FA25-45/RA25-45mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Seat Leon Cupra Type 5F 2014- Front axle 35mm/Rear axle 35mmVolkswagen Golf VII Sedan Type AU, 2WD, including DCC, Low version 2012- Front axle 45mm/Rear axle 45mmVolkswagen Golf VII GTD/GTI/GTI Performance/GTI Clubsport Type AU, 2WD, including DCC 2012- Front axle 30-35mm/Rear axle 30-35mmSeat Leon Cupra R, inclusive Facelift 2017, 2014- Front axle 25mm/Rear axle 25mmVolkswagen Golf VII GTI TCR Type AU, 2019- Front axle 25mm/Rear axle 25mmFrom 1011kg front axle load. Only for multi-link rearaxle.With ABE.

H&R Lowering Springs Seat Leon Cupra/Cupra R/Volkswagen Golf VII Sedan/GTD/GTI/TCR up to 1010kg FA-Load 2012-FA25-45/RA25-45mm

H&R Lowering Springs Seat Leon Cupra/Cupra R/Volkswagen Golf VII Sedan/GTD/GTI/TCR up to 1010kg FA-Load 2012-FA25-45/RA25-45mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Seat Leon Cupra Type 5F, up to 1010kg front axle load, only for multi-link/four-link rear axle, with ABE 2014- Front axle 35mm/Rear axle 35mmVolkswagen Golf VII Sedan Type AU, 2WD, up to 1010kg front axle load, including DCC, with ABE, Low version, only for cars with multi-link rear axle 2012- Front axle 45mm/Rear axle 45mmVolkswagen Golf VII GTD/GTI/GTI Performance/GTI Clubsport Type AU, 2WD, up to 1010kg front axle load, including DCC, only for cars with multi-link rear axle, with ABE 2012- Front axle 30-35mm/Rear axle 30-35mmSeat Leon Cupra R, up to 1010kg Front Axle-Load, only for cars with multi-link rear axle, inclusive Facelift 2017, 2014- Front axle 25mm/Rear axle 25mmVolkswagen Golf VII GTI TCR Type AU, up to 1010kg Front Axle-Load 2019- Front axle 25mm/Rear axle 25mm

H&R Lowering Springs Seat Mii/Skoda Citigo/Volkswagen UP (Facelift/GTI) 2011- FA25-40/RA25-40mm

H&R Lowering Springs Seat Mii/Skoda Citigo/Volkswagen UP (Facelift/GTI) 2011- FA25-40/RA25-40mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Seat Mii Type AA 2011- Front axle 35-40mm/Rear axle 35-40mmSkoda Citigo Type AA 2011- Front axle 40mm/Rear axle 40mmVolkswagen UP Type AA, including 5-doors 2011- Front axle 35mm/Rear axle 35mmVolkswagen UP Facelift Type AA, Facelift 2016, except Cross Up 2016- Front axle 40mm/Rear axle 40mmVolkswagen UP GTI Type AA 2017- Front axle 25mm/Rear axle 25mm

H&R Lowering Springs Tesla Model 3 4WD 2018- FA30/RA30mm

H&R Lowering Springs Tesla Model 3 4WD 2018- FA30/RA30mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Tesla Model 3 including Performance 4WD 2018- and Facelift 2023- Front axle 30mm / Rear axle 30mm

H&R Lowering Springs Volkswagen Golf VI R 4-Motion 2009- FA20-35/RA20-35mm

H&R Lowering Springs Volkswagen Golf VI R 4-Motion 2009- FA20-35/RA20-35mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Volkswagen Golf VI R 4-Motion Type 1K, 4WD, including DCC, with ABE 2009- Front axle 20mm/Rear axle 20mmVolkswagen Golf VI 4-Motion Type 1K, only 4WD, including DCC 2008- Front axle 30-35mm/Rear axle 30-35mm

H&R Lowering Springs Volkswagen Polo (GTI) up to 929kg FA-Load 2009- FA20-25/RA30-40mm

H&R Lowering Springs Volkswagen Polo (GTI) up to 929kg FA-Load 2009- FA20-25/RA30-40mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Volkswagen Polo Type 6R up to 929kg front axle load, with ABE 2009- Front axle 25mm/Rear axle 40mmVolkswagen Polo GTI Type 6R, up to 929kg front axle load 2010- Front axle 20mm/Rear axle 30-35mm

H&R Lowering Springs Volkswagen Polo (GTI) up to 929kg FA-Load 2009- FA30-35/RA45-55mm

H&R Lowering Springs Volkswagen Polo (GTI) up to 929kg FA-Load 2009- FA30-35/RA45-55mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Volkswagen Polo Type 6R, up to 929kg front axle load, Low version, with ABE 2009- Front axle 35mm/Rear axle 55mmVolkswagen Polo GTI Type 6R, up to 929kg front axle load, Low version, with ABE 2010- Front axle 30mm/Rear axle 45mm

H&R Lowering springs Volkswagen Polo VI & Seat Ibiza 6F 2017- 50mm

H&R Lowering springs Volkswagen Polo VI & Seat Ibiza 6F 2017- 50mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Volkswagen Polo VI & Seat Ibiza 6F 2017-, Front axle 50mm / Rear axle 50mm, excl. models with adaptive shocks

H&R Lowering springs Volkswagen Polo VI/GTI & Seat Ibiza 6F 2017- Incl.l Facelift FA30-35/RA30-35mm (FA-Load from 901kg) & Skoda Fabia 2021- FA45/RA40mm (VA-Load from 871kg)

H&R Lowering springs Volkswagen Polo VI/GTI & Seat Ibiza 6F 2017- FA30-35/RA30-35mm (FA-Load from 901kg) & Skoda Fabia 2021- FA45/RA40mm (VA-Load from 871kg)H&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use. Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance :Seat Ibiza FR Type KJ, from 901kg Front axle load, including adaptive shocks, 2017- Front axle 30mm/Rear axle 30mmVolkswagen Polo VI & Seat Ibiza 6F, Front axle load from 901kg, with ABE 2017- Front axle 35mm / Rear axle 35mmVolkswagen Polo GTI Type AW from 901kg Front axle load, including adaptive shocks, with ABE 2017- Front axle 35mm/Rear axle 35mmSkoda Fabia PJ, from 901kg Front axle load, including Sport & adaptive shocks, 2021- Front axle 40mm/Rear axle 45mm 

H&R Lowering Springs Volkswagen Scirocco III up to 1020kg FA-Load 2008- FA30-35/RA30-35mm

H&R Lowering Springs Volkswagen Scirocco III up to 1020kg FA-Load 2008- FA30-35/RA30-35mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Volkswagen Scirocco III Type 13, up to 1020kg front axle load, including DCC, with ABE 2008- Front axle 30-35mm/Rear axle 30-35mm

H&R Lowering Springs Volkswagen Transporter T5/T6 2/4WD from 1501kg FA-Load and 1561kg RA-Load 2003- FA40/RA40mm

H&R Lowering Springs Volkswagen Transporter T5/T6 2/4WD from 1501kg FA-Load and 1561kg RA-Load 2003- FA40/RA40mmH&R Lowering Springs have been engineered to deliver improved handling and a lowered ride height while maintaining superb ride quality. Manufactured and tested in Germany, H&R Springs are the ideal solution for the enthusiast who appreciates race-bred components designed for street use.Sporty appearanceLowered center of gravityLinear or progressive spring designCompatible with OE and aftermarket shock absorbersImproved handling characteristicsDelivered with ABE or TÜV approvalEngineered, manufactured and tested in GermanyPowder coated for enhanced appearance and corrosion resistance:Volkswagen Transporter T5 2/4WD, from 1501kg front axle load, from 1561kg rear axle load, with ABE 2003- Front axle 40mm/Rear axle 40mmVolkswagen Transporter T6 Type 7HC/7HMA/7J0, 2/4WD, from 1551kg front axle load, from 1551kg rear axle load, for dynamic-and/or sport-suspension, except bad road suspension, with ABE 2003- Front axle 40mm/Rear axle 40mm