In this category you will find wheel spacers of the well-known brand H&R. By increasing the track width, not only the appearance is improved, but you also achieve an improved road holding in combination with a higher stability, because the role of the chassis is influenced in a positive way. If you install wheel spacers, the car looks wider and better, while the wheel fills the wheelhouse.
If you can not find certain wheel spacers in our webshop, ask one of our employees.
H&R Wheel Spacers 21mm 5x130 - Hub 71,6mm - Bolt size M14x1,5 - Porsche - Black
H&R DRM-System Wheel spacers:- 21mm per spacer - 42mm per axle - Bolt pattern 5x130 - Hub 71,6mm - Bolt size M14x1,5 - Porsche - Black H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval Produced in Germany The wheel spacer should be attached to the axial hub using the fastening nuts provided. The wheels should then be fitted using the existing wheel nuts provided with the wheels. Using steel wheel rims in combination with DRM system is generally not possible. All fixing-accessories are included!
H&R Wheel Spacers 24mm 5x130 - Hub 71,6mm - Bolt size M14x1,5 - Audi/Porsche
H&R DR-System Wheel spacers:- 14mm per spacer - 28mm per axle - Bolt pattern 5x130 - Hub 71,6mm - Bolt size M14x1,5 - Audi/Porsche H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted between the wheel and the axial hub using longer wheel bolts (please order separately). When ordering the longer bolts please state which cone type you require and the required extra length. All screws for the DR Systems have to be ordered separately.
H&R Wheel Spacers 24mm 5x130 - Hub 71,6mm - Bolt size M14x1,5 - Porsche
H&R DRS-System Wheel spacers:- 14mm per spacer - 28mm per axle - Bolt pattern 5x130 - Hub 71,6mm - Bolt size M14x1,5 - Porsche H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The fitting of the DRS-System requires the exchange in the wheel flanges or the brake drums, of the existing knurl bolts with the appropriate longer H&R knurl bolts. The longer H&R knurl bolts are supplied. The wheels should then be fitted using the existing wheel nuts provided with the wheels. All fixing-accessories are included!
H&R Wheel Spacers 25mm 4x100 - Hub 54,1mm - Bolt size M12x1,25 - Suzuki Baleno EG
H&R DRM-System Wheel spacers:- 25mm per spacer - 50mm per axle - Bolt pattern 4x100 - Hub 54,1mm - Bolt size M12x1,25 - Suzuki Baleno EG H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval Produced in Germany The wheel spacer should be attached to the axial hub using the fastening nuts provided. The wheels should then be fitted using the existing wheel nuts provided with the wheels. Using steel wheel rims in combination with DRM system is generally not possible. All fixing-accessories are included!
H&R Wheel Spacers 25mm 4x100 - Hub 54,1mm - Bolt size M12x1,5 - Daihatsu/Fiat/Hyundai/Kia/Mazda/Toyota
H&R DRM-System Wheel spacers:- 25mm per spacer - 50mm per axle - Bolt pattern 4x100 - Hub 54,1mm - Bolt size M12x1,5 - Daihatsu/Fiat/Hyundai/Kia/Mazda/Toyota H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval Produced in Germany The wheel spacer should be attached to the axial hub using the fastening nuts provided. The wheels should then be fitted using the existing wheel nuts provided with the wheels. Using steel wheel rims in combination with DRM system is generally not possible. All fixing-accessories are included! Not applicable with steel rims: Fiat 124 Spider Type NF Kia Picanto Type TA Mazda MX-5 Type ND Mazda 2 Type DE/DE1 Toyota Yaris Type XP13M(a)/XP13N(a)
H&R Wheel Spacers 25mm 4x100 - Hub 54,1mm - Bolt size M12x1,5 - Daihatsu/Fiat/Hyundai/Kia/Mazda/Toyota - Black
H&R DRM-System Wheel spacers:- 25mm per spacer - 50mm per axle - Bolt pattern 4x100 - Hub 54,1mm - Bolt size M12x1,5 - Daihatsu/Fiat/Hyundai/Kia/Mazda/Toyota - Black H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval Produced in Germany The wheel spacer should be attached to the axial hub using the fastening nuts provided. The wheels should then be fitted using the existing wheel nuts provided with the wheels. Using steel wheel rims in combination with DRM system is generally not possible. All fixing-accessories are included! Not applicable with steel rims: Fiat 124 Spider Type NF Kia Picanto Type TA Mazda MX-5 Type ND Mazda 2 Type DE/DE1 Toyota Yaris Type XP13M(a)/XP13N(a)
H&R Wheel Spacers 25mm 4x100 - Hub 56,1mm - Bolt size M12x1,5 - Daihatsu/Honda/Kia/Mitsubishi/Proton/Rover
H&R DRM-System Wheel spacers:- 25mm per spacer - 50mm per axle - Bolt pattern 4x100 - Hub 56,1mm - Bolt size M12x1,5 - Daihatsu/Honda/Kia/Mitsubishi/Proton/Rover H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval Produced in Germany The wheel spacer should be attached to the axial hub using the fastening nuts provided. The wheels should then be fitted using the existing wheel nuts provided with the wheels. Using steel wheel rims in combination with DRM system is generally not possible. All fixing-accessories are included!
H&R Wheel Spacers 25mm 4x100 - Hub 56,6mm - Bolt size M12x1,5 - Chevrolet/Fiat/Opel/Vauxhall
H&R DRA-System Wheel spacers:- 25mm per spacer - 50mm per axle - Bolt pattern 4x100 - Hub 56,6mm - Bolt size M12x1,5 - Chevrolet/Fiat/Opel/Vauxhall H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted to the axial hub using the fastening bolts provided. The wheels should then be fitted using the existing wheel bolts provided with the wheels. The length of the existing screw sticking out of the rim, must necessarily be smaller than the width of the wheel spacer! All fixing-accessories are included!
H&R Wheel Spacers 25mm 4x100 - Hub 57,1mm - Bolt size M12x1,5 - BMW/Seat/Skoda/Volkswagen
H&R DRA-System Wheel spacers:- 25mm per spacer - 50mm per axle - Bolt pattern 4x100 - Hub 57,1mm - Bolt size M12x1,5 - BMW/Seat/Skoda/Volkswagen H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted to the axial hub using the fastening bolts provided. The wheels should then be fitted using the existing wheel bolts provided with the wheels. The length of the existing screw sticking out of the rim, must necessarily be smaller than the width of the wheel spacer! All fixing-accessories are included!
H&R Wheel Spacers 25mm 4x100 - Hub 57,1mm - Bolt size M12x1,5 - BMW/Seat/Skoda/Volkswagen - Black
H&R DRA-System Wheel spacers:- 25mm per spacer - 50mm per axle - Bolt pattern 4x100 - Hub 57,1mm - Bolt size M12x1,5 - BMW/Seat/Skoda/Volkswagen - Black H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted to the axial hub using the fastening bolts provided. The wheels should then be fitted using the existing wheel bolts provided with the wheels. The length of the existing screw sticking out of the rim, must necessarily be smaller than the width of the wheel spacer! All fixing-accessories are included!
H&R Wheel Spacers 25mm 4x100 - Hub 57,1mm - Bolt size M12x1,5 - Opel/Vauxhall
H&R DRM-System Wheel spacers:- 25mm per spacer - 50mm per axle - Bolt pattern 4x100 - Hub 57,1mm - Bolt size M12x1,5 - Opel/Vauxhall H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval Produced in Germany The wheel spacer should be attached to the axial hub using the fastening nuts provided. The wheels should then be fitted using the existing wheel nuts provided with the wheels. Using steel wheel rims in combination with DRM system is generally not possible. All fixing-accessories are included!
H&R Wheel Spacers 25mm 4x100 - Hub 59,1mm - Bolt size M12x1,25 - Nissan/Subaru
H&R DRM-System Wheel spacers:- 25mm per spacer - 50mm per axle - Bolt pattern 4x100 - Hub 59,1mm - Bolt size M12x1,25 - Nissan/Subaru H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval Produced in Germany The wheel spacer should be attached to the axial hub using the fastening nuts provided. The wheels should then be fitted using the existing wheel nuts provided with the wheels. Using steel wheel rims in combination with DRM system is generally not possible. All fixing-accessories are included!
H&R Wheel Spacers 25mm 4x100 - Hub 60,1mm - Bolt size M12x1,5 - Dacia/Nissan/Renault/Smart
H&R DRA-System Wheel spacers:- 25mm per spacer - 50mm per axle - Bolt pattern 4x100 - Hub 60,1mm - Bolt size M12x1,5 - Dacia/Nissan/Renault/Smart H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted to the axial hub using the fastening bolts provided. The wheels should then be fitted using the existing wheel bolts provided with the wheels. The length of the existing screw sticking out of the rim, must necessarily be smaller than the width of the wheel spacer! All fixing-accessories are included! Nissan Micra K12: Bolt size M12x1,25 Smart: Using the spacers with steel rims is not possible.
H&R Wheel Spacers 25mm 4x108 - Hub 57,1mm - Bolt size M14x1,5 - Audi
H&R DRA-System Wheel spacers:- 25mm per spacer - 50mm per axle - Bolt pattern 4x108 - Hub 57,1mm - Bolt size M14x1,5 - Audi H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted to the axial hub using the fastening bolts provided. The wheels should then be fitted using the existing wheel bolts provided with the wheels. The length of the existing screw sticking out of the rim, must necessarily be smaller than the width of the wheel spacer! All fixing-accessories are included!
H&R Wheel Spacers 25mm 4x108 - Hub 63,3mm - Bolt size M12x1,5 - Ford
H&R DRA-System Wheel spacers:- 25mm per spacer - 50mm per axle - Bolt pattern 4x108 - Hub 63,3mm - Bolt size M12x1,5 - Ford H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted to the axial hub using the fastening bolts provided. The wheels should then be fitted using the existing wheel bolts provided with the wheels. The length of the existing screw sticking out of the rim, must necessarily be smaller than the width of the wheel spacer! All fixing-accessories are included!
H&R Wheel Spacers 25mm 4x108 - Hub 63,3mm - Bolt size M12x1,5 - Ford/Mazda
H&R DRM-System Wheel spacers:- 25mm per spacer - 50mm per axle - Bolt pattern 4x108 - Hub 63,3mm - Bolt size M12x1,5 - Ford/Mazda H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval Produced in Germany The wheel spacer should be attached to the axial hub using the fastening nuts provided. The wheels should then be fitted using the existing wheel nuts provided with the wheels. Using steel wheel rims in combination with DRM system is generally not possible. All fixing-accessories are included! Ford Fiesta Type JA8 Using the spacers with steel rims is not possible. Attention: By using spacers for a Mazda 2 Type DY the wheel hubs have to be sealed watertight!
H&R Wheel Spacers 25mm 4x108 - Hub 65,0mm
H&R DRA-System Wheel spacers:- 25mm per spacer - 50mm per axle - Bolt pattern 4x108 - Hub 65,0mm H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted to the axial hub using the fastening bolts provided. The wheels should then be fitted using the existing wheel bolts provided with the wheels. The length of the existing screw sticking out of the rim, must necessarily be smaller than the width of the wheel spacer! All fixing-accessories are included!
H&R Wheel Spacers 25mm 4x108 - Hub 65,0mm - Bolt size M12x1,25 - Citroën/Peugeot
H&R DRA-System Wheel spacers:- 25mm per spacer - 50mm per axle - Bolt pattern 4x108 - Hub 65,0mm - Bolt size M12x1,25 - Citroën/Peugeot H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted to the axial hub using the fastening bolts provided. The wheels should then be fitted using the existing wheel bolts provided with the wheels. The length of the existing screw sticking out of the rim, must necessarily be smaller than the width of the wheel spacer! All fixing-accessories are included!
H&R Wheel Spacers 25mm 4x108 - Hub 65,0mm - Bolt size M12x1,75 - Volvo
H&R DRA-System Wheel spacers:- 25mm per spacer - 50mm per axle - Bolt pattern 4x108 - Hub 65,0mm - Bolt size M12x1,75 - Volvo H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted to the axial hub using the fastening bolts provided. The wheels should then be fitted using the existing wheel bolts provided with the wheels. The length of the existing screw sticking out of the rim, must necessarily be smaller than the width of the wheel spacer! All fixing-accessories are included!
H&R Wheel Spacers 25mm 4x114,3 - Hub 59,5mm - Bolt size M12x1,5 - Kia Pride
H&R DRM-System Wheel spacers:- 25mm per spacer - 50mm per axle - Bolt pattern 4x114,3 - Hub 59,5mm - Bolt size M12x1,5 - Kia Pride H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval Produced in Germany The wheel spacer should be attached to the axial hub using the fastening nuts provided. The wheels should then be fitted using the existing wheel nuts provided with the wheels. Using steel wheel rims in combination with DRM system is generally not possible. All fixing-accessories are included!
H&R Wheel Spacers 25mm 4x114,3 - Hub 60,1mm - Bolt size M12x1,25 - Suzuki Swift
H&R DRM-System Wheel spacers:- 25mm per spacer - 50mm per axle - Bolt pattern 4x114,3 - Hub 60,1mm - Bolt size M12x1,25 - Suzuki Swift H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval Produced in Germany The wheel spacer should be attached to the axial hub using the fastening nuts provided. The wheels should then be fitted using the existing wheel nuts provided with the wheels. Using steel wheel rims in combination with DRM system is generally not possible. All fixing-accessories are included!
H&R Wheel Spacers 25mm 4x114,3 - Hub 64,0mm - Bolt size M12x1,5 - Honda/Rover
H&R DRM-System Wheel spacers:- 25mm per spacer - 50mm per axle - Bolt pattern 4x114,3 - Hub 64,0mm - Bolt size M12x1,5 - Honda/Rover H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval Produced in Germany The wheel spacer should be attached to the axial hub using the fastening nuts provided. The wheels should then be fitted using the existing wheel nuts provided with the wheels. Using steel wheel rims in combination with DRM system is generally not possible. All fixing-accessories are included!
H&R Wheel Spacers 25mm 4x114,3 - Hub 66,2mm - Bolt size M12x1,25 - Nissan
H&R DRM-System Wheel spacers:- 25mm per spacer - 50mm per axle - Bolt pattern 4x114,3 - Hub 66,2mm - Bolt size M12x1,25 - Nissan H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval Produced in Germany The wheel spacer should be attached to the axial hub using the fastening nuts provided. The wheels should then be fitted using the existing wheel nuts provided with the wheels. Using steel wheel rims in combination with DRM system is generally not possible. All fixing-accessories are included!
H&R Wheel Spacers 25mm 4x114,3 - Hub 67,1mm - Bolt size M12x1,5 - Hyundai/Kia/Mitsubishi/Smart/Volvo
H&R DRM-System Wheel spacers:- 25mm per spacer - 50mm per axle - Bolt pattern 4x114,3 - Hub 67,1mm - Bolt size M12x1,5 - Hyundai/Kia/Mitsubishi/Smart/Volvo H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval Produced in Germany The wheel spacer should be attached to the axial hub using the fastening nuts provided. The wheels should then be fitted using the existing wheel nuts provided with the wheels. Using steel wheel rims in combination with DRM system is generally not possible. All fixing-accessories are included!
H&R Wheel Spacers 25mm 4x130 - Hub 78,6mm - Bolt size M14x1,5 - Volkswagen
H&R DRA-System Wheel spacers:- 25mm per spacer - 50mm per axle - Bolt pattern 4x130 - Hub 78,6mm - Bolt size M14x1,5 - Volkswagen H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted to the axial hub using the fastening bolts provided. The wheels should then be fitted using the existing wheel bolts provided with the wheels. The length of the existing screw sticking out of the rim, must necessarily be smaller than the width of the wheel spacer! All fixing-accessories are included!
H&R Wheel Spacers 25mm 4x95,25 - Hub 56,7mm - Bolt size M12x1,5 - Lotus/Rover
H&R DRM-System Wheel spacers:- 25mm per spacer - 50mm per axle - Bolt pattern 4x95,25 - Hub 56,7mm - Bolt size M12x1,5 - Lotus/Rover H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval Produced in Germany The wheel spacer should be attached to the axial hub using the fastening nuts provided. The wheels should then be fitted using the existing wheel nuts provided with the wheels. Using steel wheel rims in combination with DRM system is generally not possible. All fixing-accessories are included!
H&R Wheel Spacers 25mm 4x98 - Hub 58,0mm - Bolt size M12x1,25 - Alfa Romeo/Fiat/Ford/Lancia
H&R DRA-System Wheel spacers:- 25mm per spacer - 50mm per axle - Bolt pattern 4x98 - Hub 58,0mm - Bolt size M12x1,25 - Alfa Romeo/Fiat/Ford/Lancia H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted to the axial hub using the fastening bolts provided. The wheels should then be fitted using the existing wheel bolts provided with the wheels. The length of the existing screw sticking out of the rim, must necessarily be smaller than the width of the wheel spacer! All fixing-accessories are included!
H&R Wheel Spacers 25mm 4x98 - Hub 58,5mm
H&R DRM-System Wheel spacers:- 25mm per spacer - 50mm per axle - Bolt pattern 4x98 - Hub 58,5mm H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval Produced in Germany The wheel spacer should be attached to the axial hub using the fastening nuts provided. The wheels should then be fitted using the existing wheel nuts provided with the wheels. Using steel wheel rims in combination with DRM system is generally not possible. All fixing-accessories are included!
H&R Wheel Spacers 25mm 5x100 - Hub 54,1mm - Bolt size M12x1,5 - Toyota
H&R DRM-System Wheel spacers:- 25mm per spacer - 50mm per axle - Bolt pattern 5x100 - Hub 54,1mm - Bolt size M12x1,5 - Toyota H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval Produced in Germany The wheel spacer should be attached to the axial hub using the fastening nuts provided. The wheels should then be fitted using the existing wheel nuts provided with the wheels. Using steel wheel rims in combination with DRM system is generally not possible. All fixing-accessories are included!
H&R Wheel Spacers 25mm 5x100 - Hub 56,0mm - Bolt size M12x1,25 - Subaru
H&R DRM-System Wheel spacers:- 25mm per spacer - 50mm per axle - Bolt pattern 5x100 - Hub 56,0mm - Bolt size M12x1,25 - Subaru H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval Produced in Germany The wheel spacer should be attached to the axial hub using the fastening nuts provided. The wheels should then be fitted using the existing wheel nuts provided with the wheels. Using steel wheel rims in combination with DRM system is generally not possible. All fixing-accessories are included!
H&R Wheel Spacers 25mm 5x100 - Hub 57,1mm - Bolt size M12x1,5 - Chrysler
H&R DRM-System Wheel spacers:- 25mm per spacer - 50mm per axle - Bolt pattern 5x100 - Hub 57,1mm - Bolt size M12x1,5 - Chrysler H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval Produced in Germany The wheel spacer should be attached to the axial hub using the fastening nuts provided. The wheels should then be fitted using the existing wheel nuts provided with the wheels. Using steel wheel rims in combination with DRM system is generally not possible. All fixing-accessories are included!
H&R Wheel Spacers 25mm 5x100 - Hub 57,1mm - Bolt size M14x1,5 - Audi/Seat/Skoda/Volkswagen
H&R DRA-System Wheel spacers:- 25mm per spacer - 50mm per axle - Bolt pattern 5x100 - Hub 57,1mm - Bolt size M14x1,5 - Audi/Seat/Skoda/Volkswagen H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted to the axial hub using the fastening bolts provided. The wheels should then be fitted using the existing wheel bolts provided with the wheels. The length of the existing screw sticking out of the rim, must necessarily be smaller than the width of the wheel spacer! All fixing-accessories are included! Skoda Fabia RS Type 5J only for rear axle. Using the spacers with steel rims is not possible.
H&R Wheel Spacers 25mm 5x100 - Hub 57,1mm - Bolt size M14x1,5 - Audi/Seat/Skoda/Volkswagen - Black
H&R DRA-System Wheel spacers:- 25mm per spacer - 50mm per axle - Bolt pattern 5x100 - Hub 57,1mm - Bolt size M14x1,5 - Audi/Seat/Skoda/Volkswagen - Black H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted to the axial hub using the fastening bolts provided. The wheels should then be fitted using the existing wheel bolts provided with the wheels. The length of the existing screw sticking out of the rim, must necessarily be smaller than the width of the wheel spacer! All fixing-accessories are included! Skoda Fabia RS Type 5J only for rear axle. Using the spacers with steel rims is not possible.
H&R Wheel Spacers 25mm 5x108 - Hub 58,0mm - Bolt size M12x1,25 - Alfa Romeo/Lancia
H&R DRA-System Wheel spacers:- 25mm per spacer - 50mm per axle - Bolt pattern 5x108 - Hub 58,0mm - Bolt size M12x1,25 - Alfa Romeo/Lancia H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted to the axial hub using the fastening bolts provided. The wheels should then be fitted using the existing wheel bolts provided with the wheels. The length of the existing screw sticking out of the rim, must necessarily be smaller than the width of the wheel spacer! All fixing-accessories are included!
H&R Wheel Spacers 25mm 5x108 - Hub 60,1mm - Bolt size M14x1,5 - Lotus/Renault
H&R DRA-System Wheel spacers:- 25mm per spacer - 50mm per axle - Bolt pattern 5x108 - Hub 60,1mm - Bolt size M14x1,5 - Lotus/Renault H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted to the axial hub using the fastening bolts provided. The wheels should then be fitted using the existing wheel bolts provided with the wheels. The length of the existing screw sticking out of the rim, must necessarily be smaller than the width of the wheel spacer! All fixing-accessories are included!
H&R Wheel Spacers 25mm 5x108 - Hub 63,3mm - Bolt size M12x1,5 - Ford/Jaguar/Volvo
H&R DRM-System Wheel spacers:- 25mm per spacer - 50mm per axle - Bolt pattern 5x108 - Hub 63,3mm - Bolt size M12x1,5 - Ford/Jaguar/Volvo H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval Produced in Germany The wheel spacer should be attached to the axial hub using the fastening nuts provided. The wheels should then be fitted using the existing wheel nuts provided with the wheels. Using steel wheel rims in combination with DRM system is generally not possible. All fixing-accessories are included! Not applicable with steel rims: Jaguar F-Type Type QQ6: The original stud bolts have always to be shortened!. Jaguar S-Type/X-Type Type CCX/CF1 Ford Mondeo B4Y/B5Y/BWY Ford Mondeo BA 6 (up to model 2014) Volvo C30 Type M Volvo V40 Type M Volvo S40/V50 Type M