In this category you will find wheel spacers of the well-known brand H&R. By increasing the track width, not only the appearance is improved, but you also achieve an improved road holding in combination with a higher stability, because the role of the chassis is influenced in a positive way. If you install wheel spacers, the car looks wider and better, while the wheel fills the wheelhouse.
If you can not find certain wheel spacers in our webshop, ask one of our employees.
H&R Wheel Spacers 5mm 4x100 - Hub 59,1mm - Bolt size M12x1,25 - Nissan/Subaru
H&R DRS-System Wheel spacers:- 5mm per spacer - 10mm per axle - Bolt pattern 4x100 - Hub 59,1mm - Bolt size M12x1,25 - Nissan/Subaru H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The fitting of the DRS-System requires the exchange in the wheel flanges or the brake drums, of the existing knurl bolts with the appropriate longer H&R knurl bolts. The longer H&R knurl bolts are supplied. The wheels should then be fitted using the existing wheel nuts provided with the wheels. All fixing-accessories are included!
H&R Wheel Spacers 5mm 4x100 - Hub 60,1mm - Bolt size M12x1,5 - Dacia/Nissan/Renault/Smart
H&R DR-System Wheel spacers:- 5mm per spacer - 10mm per axle - Bolt pattern 4x100 - Hub 60,1mm - Bolt size M12x1,5 - Dacia/Nissan/Renault/Smart H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted between the wheel and the axial hub using longer wheel bolts (please order separately). When ordering the longer bolts please state which cone type you require and the required extra length. All screws for the DR Systems have to be ordered separately. Bolt size M12x1,25: Nissan Micra K12 Not applicable with steel rims: Renault Clio D (IV) Type R Smart fortwo/forfour Type 451 (453)
H&R Wheel Spacers 5mm 4x100/108 - Hub 57,1mm - Bolt size M12x1,5 - Audi/BMW/Seat/Skoda/Volkswagen
H&R DR-System Wheel spacers:- 5mm per spacer - 10mm per axle - Bolt pattern 4x100/108 - Hub 57,1mm - Bolt size M12x1,5 - Audi/BMW/Seat/Skoda/Volkswagen H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted between the wheel and the axial hub using longer bolt snot supplied (please order separately). When ordering the longer bolts please state which cone type you require and the required extra length. All screws for the DR Systems have to be ordered separately. Bolt size M14x1,5: Audi Type 89/B4/B4Q Audi 80 Type 89 (Q)/B4 (Q)/100/200 Type 44/44Q
H&R Wheel Spacers 5mm 4x108 - Hub 63,3mm - Bolt size M12x1,5 - Ford
H&R DR-System Wheel spacers:- 5mm per spacer - 10mm per axle - Bolt pattern 4x108 - Hub 63,3mm - Bolt size M12x1,5 - Ford H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted between the wheel and the axial hub using longer wheel bolts (please order separately). When ordering the longer bolts please state which cone type you require and the required extra length. All screws for the DR Systems have to be ordered separately.
H&R Wheel Spacers 5mm 4x108 - Hub 63,3mm - Bolt size M12x1,5 - Ford/Mazda
H&R DRS-System Wheel spacers:- 5mm per spacer - 10mm per axle - Bolt pattern 4x108 - Hub 63,3mm - Bolt size M12x1,5 - Ford/Mazda H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The fitting of the DRS-System requires the exchange in the wheel flanges or the brake drums, of the existing knurl bolts with the appropriate longer H&R knurl bolts. The longer H&R knurl bolts are supplied. The wheels should then be fitted using the existing wheel nuts provided with the wheels. All fixing-accessories are included! Mazda 2 Type DY: Attention: By using spacers the rear axle wheel hub have to be sealed watertight!
H&R Wheel Spacers 5mm 4x108 - Hub 65,0mm - Bolt size M12x1,25 - Citroën/Peugeot/Volvo
H&R DR-System Wheel spacers:- 5mm per spacer - 10mm per axle - Bolt pattern 4x108 - Hub 65,0mm - Bolt size M12x1,25 - Citroën/Peugeot/Volvo H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted between the wheel and the axial hub using longer wheel bolts (please order separately). When ordering the longer bolts please state which cone type you require and the required extra length. All screws for the DR Systems have to be ordered separately. Bolt size M12x1,75 Volvo 850 (4-hole-wheels) Volvo S70/V70 Type L (4-hole-wheels)
H&R Wheel Spacers 5mm 4x114,3 - Hub 64,0mm - Bolt size M12x1,5 - Honda/Rover
H&R DRS-System Wheel spacers:- 5mm per spacer - 10mm per axle - Bolt pattern 4x114,3 - Hub 64,0mm - Bolt size M12x1,5 - Honda/Rover H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The fitting of the DRS-System requires the exchange in the wheel flanges or the brake drums, of the existing knurl bolts with the appropriate longer H&R knurl bolts. The longer H&R knurl bolts are supplied. The wheels should then be fitted using the existing wheel nuts provided with the wheels. All fixing-accessories are included!
H&R Wheel Spacers 5mm 4x114,3 - Hub 66,2mm - Bolt size M12x1,25 - Nissan
H&R DRS-System Wheel spacers:- 5mm per spacer - 10mm per axle - Bolt pattern 4x114,3 - Hub 66,2mm - Bolt size M12x1,25 - Nissan H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The fitting of the DRS-System requires the exchange in the wheel flanges or the brake drums, of the existing knurl bolts with the appropriate longer H&R knurl bolts. The longer H&R knurl bolts are supplied. The wheels should then be fitted using the existing wheel nuts provided with the wheels. All fixing-accessories are included!
H&R Wheel Spacers 5mm 4x114,3 - Hub 66,2mm - Bolt size M12x1,25 - Nissan 200SX S13
H&R DRS-System Wheel spacers:- 5mm per spacer - 10mm per axle - Bolt pattern 4x114,3 - Hub 66,2mm - Bolt size M12x1,25 - Nissan 200SX S13 H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The fitting of the DRS-System requires the exchange in the wheel flanges or the brake drums, of the existing knurl bolts with the appropriate longer H&R knurl bolts. The longer H&R knurl bolts are supplied. The wheels should then be fitted using the existing wheel nuts provided with the wheels. All fixing-accessories are included!
H&R Wheel Spacers 5mm 4x114,3 - Hub 67,1mm - Bolt size M12x1,5 - Hyundai
H&R DRS-System Wheel spacers:- 5mm per spacer - 10mm per axle - Bolt pattern 4x114,3 - Hub 67,1mm - Bolt size M12x1,5 - Hyundai H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The fitting of the DRS-System requires the exchange in the wheel flanges or the brake drums, of the existing knurl bolts with the appropriate longer H&R knurl bolts. The longer H&R knurl bolts are supplied. The wheels should then be fitted using the existing wheel nuts provided with the wheels. All fixing-accessories are included!
H&R Wheel Spacers 5mm 4x114,3 - Hub 67,1mm - Bolt size M12x1,5 - Mitsubishi/Volvo/Smart
H&R DRS-System Wheel spacers:- 5mm per spacer - 10mm per axle - Bolt pattern 4x114,3 - Hub 67,1mm - Bolt size M12x1,5 - Mitsubishi/Volvo/Smart H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The fitting of the DRS-System requires the exchange in the wheel flanges or the brake drums, of the existing knurl bolts with the appropriate longer H&R knurl bolts. The longer H&R knurl bolts are supplied. The wheels should then be fitted using the existing wheel nuts provided with the wheels. All fixing-accessories are included!
H&R Wheel Spacers 5mm 4x98 - Hub 58,0mm - Bolt size M12x1,25 - Alfa Romeo/Fiat/Ford/Lancia
H&R DR-System Wheel spacers:- 5mm per spacer - 10mm per axle - Bolt pattern 4x98 - Hub 58,0mm - Bolt size M12x1,25 - Alfa Romeo/Fiat/Ford/Lancia H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted between the wheel and the axial hub using longer wheel bolts (please order separately). When ordering the longer bolts please state which cone type you require and the required extra length. All screws for the DR Systems have to be ordered separately.
H&R Wheel Spacers 5mm 5x100 - Hub 54,1mm - Bolt size M12x1,5 - Toyota
H&R DRS-System Wheel spacers:- 5mm per spacer - 10mm per axle - Bolt pattern 5x100 - Hub 54,1mm - Bolt size M12x1,5 - Toyota H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The fitting of the DRS-System requires the exchange in the wheel flanges or the brake drums, of the existing knurl bolts with the appropriate longer H&R knurl bolts. The longer H&R knurl bolts are supplied. The wheels should then be fitted using the existing wheel nuts provided with the wheels. All fixing-accessories are included!
H&R Wheel Spacers 5mm 5x100 - Hub 56,0mm - Bolt size M12x1,25 - Subaru
H&R DRS-System Wheel spacers:- 5mm per spacer - 10mm per axle - Bolt pattern 5x100 - Hub 56,0mm - Bolt size M12x1,25 - Subaru H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The fitting of the DRS-System requires the exchange in the wheel flanges or the brake drums, of the existing knurl bolts with the appropriate longer H&R knurl bolts. The longer H&R knurl bolts are supplied. The wheels should then be fitted using the existing wheel nuts provided with the wheels. All fixing-accessories are included!
H&R Wheel Spacers 5mm 5x100/112 - Hub 57,1mm - Bolt size M14x1,5 - Audi/Seat/Skoda/Volkswagen
H&R DR-System Wheel spacers:- 5mm per spacer - 10mm per axle - Bolt pattern 5x100/112 - Hub 57,1mm - Bolt size M14x1,5 - Audi/Seat/Skoda/Volkswagen H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted between the wheel and the axial hub using longer bolt snot supplied (please order separately). When ordering the longer bolts please state which cone type you require and the required extra length. All screws for the DR Systems have to be ordered separately. Skoda Fabia RS Type 5J only for rear axle. Using the spacers with steel rims is not possible.
H&R Wheel Spacers 5mm 5x108 - Hub 60,1mm - Bolt size M12/14x1,5 - Renault
H&R DR-System Wheel spacers:- 5mm per spacer - 10mm per axle - Bolt pattern 5x108 - Hub 60,1mm - Bolt size M12/14x1,5 - Renault H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted between the wheel and the axial hub using longer wheel bolts (please order separately). When ordering the longer bolts please state which cone type you require and the required extra length. All screws for the DR Systems have to be ordered separately. Bolt size M12x1,5: Renault Clio B (5-hole-wheels) Renault Scenic JA (5-hole-wheels) Renault Laguna Type G Bolt size M14x1,5 Renault RX4 & Safrane (5-hole-wheels) Renault Laguna Type B/K 56 (5-hole-wheels) Renault Espace 6-Cylinder (J63) (5-hole-wheels)
H&R Wheel Spacers 5mm 5x108 - Hub 65,0mm - Citroën/Peugeot/Volvo
H&R DR-System Wheel spacers:- 5mm per spacer - 10mm per axle - Bolt pattern 5x108 - Hub 65,0mm - Citroën/Peugeot/Volvo H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted between the wheel and the axial hub using longer wheel bolts (please order separately). When ordering the longer bolts please state which cone type you require and the required extra length. All screws for the DR Systems have to be ordered separately. Bolt size M12x1,25 Citroën C5/XM Peugeot 308 Type L (Not applicable with steel rims) Peugeot 605/407/508/RCZ Bolt size M14x1,5 Volvo S60 Type R Volvo V70 Type S Volvo S80 Type T Bolt size M12x1,75 Volvo 850 (5-hole-wheels) Volvo S70/V70 Type L (5-hole-wheels) Volvo C70 Type N Volvo S90/V90
H&R Wheel Spacers 5mm 5x110 - Hub 65,0mm - Bolt size M12x1,5 - Alfa Romeo/Cadillac/Jeep/Fiat/Opel/Vauxhall/Saab
H&R DR-System Wheel spacers:- 5mm per spacer - 10mm per axle - Bolt pattern 5x110 - Hub 65,0mm - Bolt size M12x1,5 - Alfa Romeo/Cadillac/Jeep/Fiat/Opel/Vauxhall/Saab H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted between the wheel and the axial hub using longer wheel bolts (please order separately). When ordering the longer bolts please state which cone type you require and the required extra length. All screws for the DR Systems have to be ordered separately. Bolt size M12x1,25 Alfa Romeo Giulietta Type 940 Jeep Cherokee Type KL (Not applicable with steel rims) Jeep Compass Type MX
H&R Wheel Spacers 5mm 5x112 - Hub 57,1mm - Bolt size M14x1,5 - Audi/Bentley/Ford/Seat/Skoda/Volkswagen
H&R DR-System Wheel spacers:- 5mm per spacer - 10mm per axle - Bolt pattern 5x112 - Bolt size M14x1,5 - Hub 57,1mm - Audi/Bentley/Ford/Seat/Skoda/Volkswagen H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted between the wheel and the axial hub using longer bolt snot supplied (please order separately). When ordering the longer bolts please state which cone type you require and the required extra length. All screws for the DR Systems have to be ordered separately. Volkswagen Golf VII Type AU/AUV Using the spacers with steel rims is not possible. Volkswagen Beetle Type 16 Using the spacers with steel rims is not possible.
H&R Wheel Spacers 5mm 5x112 - Hub 63,3mm - Bolt size M12x1,5 - Ford Scorpio
H&R DRS-System Wheel spacers:- 5mm per spacer - 10mm per axle - Bolt pattern 5x112 - Hub 63,3mm - Bolt size M12x1,5 - Ford Scorpio H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The fitting of the DRS-System requires the exchange in the wheel flanges or the brake drums, of the existing knurl bolts with the appropriate longer H&R knurl bolts. The longer H&R knurl bolts are supplied. The wheels should then be fitted using the existing wheel nuts provided with the wheels. All fixing-accessories are included!
H&R Wheel Spacers 5mm 5x112mm - Hub 66,5mm - Bolt size M14x1,5 - Volkswagen T2/T3
H&R DRS-System Wheel spacers:- 5mm per spacer - 10mm per axle - Bolt pattern 5x112mm - Hub 66,5mm - Bolt size M14x1,5 - Volkswagen T2/T3 H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The fitting of the DRS-System requires the exchange in the wheel flanges or the brake drums, of the existing knurl bolts with the appropriate longer H&R knurl bolts. The longer H&R knurl bolts are supplied. The wheels should then be fitted using the existing wheel nuts provided with the wheels. All fixing-accessories are included! Volkswagen Transporter T2/T3 only for rear axle
H&R Wheel Spacers 5mm 5x112mm - Hub 66,5mm - Bolt size M14x1,5 - Volkswagen Transporter
H&R DR-System Wheel spacers:- 5mm per spacer - 10mm per axle - Bolt pattern 5x112mm - Hub 66,5mm - Bolt size M14x1,5 - Volkswagen Transporter H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted between the wheel and the axial hub using longer bolt snot supplied (please order separately). When ordering the longer bolts please state which cone type you require and the required extra length. All screws for the DR Systems have to be ordered separately. Volkswagen Transporter T2/T3 only for front axle
H&R Wheel Spacers 5mm 5x114,3 - Hub 59,5mm - Bolt size M12x1,5 - Ford Probe
H&R DRS-System Wheel spacers:- 5mm per spacer - 10mm per axle - Bolt pattern 5x114,3 - Hub 59,5mm - Bolt size M12x1,5 - Ford Probe H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The fitting of the DRS-System requires the exchange in the wheel flanges or the brake drums, of the existing knurl bolts with the appropriate longer H&R knurl bolts. The longer H&R knurl bolts are supplied. The wheels should then be fitted using the existing wheel nuts provided with the wheels. All fixing-accessories are included!
H&R Wheel Spacers 5mm 5x114,3 - Hub 59,5mm - Bolt size M12x1,5 - Mazda
H&R DRS-System Wheel spacers:- 5mm per spacer - 10mm per axle - Bolt pattern 5x114,3 - Hub 59,5mm - Bolt size M12x1,5 - Mazda H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The fitting of the DRS-System requires the exchange in the wheel flanges or the brake drums, of the existing knurl bolts with the appropriate longer H&R knurl bolts. The longer H&R knurl bolts are supplied. The wheels should then be fitted using the existing wheel nuts provided with the wheels. All fixing-accessories are included!
H&R Wheel Spacers 5mm 5x114,3 - Hub 60,1mm - Bolt size M12x1,5 - Toyota
H&R DRS-System Wheel spacers:- 5mm per spacer - 10mm per axle - Bolt pattern 5x114,3 - Hub 60,1mm - Bolt size M12x1,5 - Toyota H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The fitting of the DRS-System requires the exchange in the wheel flanges or the brake drums, of the existing knurl bolts with the appropriate longer H&R knurl bolts. The longer H&R knurl bolts are supplied. The wheels should then be fitted using the existing wheel nuts provided with the wheels. All fixing-accessories are included!
H&R Wheel Spacers 5mm 5x114,3 - Hub 64,0mm - Bolt size M12x1,5 - Honda
H&R DRS-System Wheel spacers:- 5mm per spacer - 10mm per axle - Bolt pattern 5x114,3 - Hub 64,0mm - Bolt size M12x1,5 - Honda H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The fitting of the DRS-System requires the exchange in the wheel flanges or the brake drums, of the existing knurl bolts with the appropriate longer H&R knurl bolts. The longer H&R knurl bolts are supplied. The wheels should then be fitted using the existing wheel nuts provided with the wheels. All fixing-accessories are included!
H&R Wheel Spacers 5mm 5x114,3 - Hub 66,2mm - Bolt size M12x1,25 - Nissan
H&R DRS-System Wheel spacers:- 5mm per spacer - 10mm per axle - Bolt pattern 5x114,3 - Hub 66,2mm - Bolt size M12x1,25 - Nissan H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The fitting of the DRS-System requires the exchange in the wheel flanges or the brake drums, of the existing knurl bolts with the appropriate longer H&R knurl bolts. The longer H&R knurl bolts are supplied. The wheels should then be fitted using the existing wheel nuts provided with the wheels. All fixing-accessories are included!
H&R Wheel Spacers 5mm 5x114,3 - Hub 67,1mm - Bolt size M12x1,5 - Ford Probe
H&R DRS-System Wheel spacers:- 5mm per spacer - 10mm per axle - Bolt pattern 5x114,3 - Hub 67,1mm - Bolt size M12x1,5 - Ford Probe H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The fitting of the DRS-System requires the exchange in the wheel flanges or the brake drums, of the existing knurl bolts with the appropriate longer H&R knurl bolts. The longer H&R knurl bolts are supplied. The wheels should then be fitted using the existing wheel nuts provided with the wheels. All fixing-accessories are included!
H&R Wheel Spacers 5mm 5x114,3 - Hub 67,1mm - Bolt size M12x1,5 - Mazda
H&R DRS-System Wheel spacers:- 5mm per spacer - 10mm per axle - Bolt pattern 5x114,3 - Hub 67,1mm - Bolt size M12x1,5 - Mazda H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The fitting of the DRS-System requires the exchange in the wheel flanges or the brake drums, of the existing knurl bolts with the appropriate longer H&R knurl bolts. The longer H&R knurl bolts are supplied. The wheels should then be fitted using the existing wheel nuts provided with the wheels. All fixing-accessories are included!
H&R Wheel Spacers 5mm 5x114,3 - Hub 67,1mm - Bolt size M12x1,5 - Mitsubishi
H&R DRS-System Wheel spacers:- 5mm per spacer - 10mm per axle - Bolt pattern 5x114,3 - Hub 67,1mm - Bolt size M12x1,5 - Mitsubishi H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The fitting of the DRS-System requires the exchange in the wheel flanges or the brake drums, of the existing knurl bolts with the appropriate longer H&R knurl bolts. The longer H&R knurl bolts are supplied. The wheels should then be fitted using the existing wheel nuts provided with the wheels. All fixing-accessories are included!
H&R Wheel Spacers 5mm 5x114,3 - Hub 70,0mm - Bolt size M12x1,5 - Honda
H&R DRS-System Wheel spacers:- 5mm per spacer - 10mm per axle - Bolt pattern 5x114,3 - Hub 70,0mm - Bolt size M12x1,5 - Honda H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The fitting of the DRS-System requires the exchange in the wheel flanges or the brake drums, of the existing knurl bolts with the appropriate longer H&R knurl bolts. The longer H&R knurl bolts are supplied. The wheels should then be fitted using the existing wheel nuts provided with the wheels. All fixing-accessories are included!
H&R Wheel Spacers 5mm 5x114,3 - Hub 71,5mm - Bolt size M12x1,5 - Chrysler Voyager
H&R DRS-System Wheel spacers:- 5mm per spacer - 10mm per axle - Bolt pattern 5x114,3 - Hub 71,5mm - Bolt size M12x1,5 - Chrysler Voyager H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The fitting of the DRS-System requires the exchange in the wheel flanges or the brake drums, of the existing knurl bolts with the appropriate longer H&R knurl bolts. The longer H&R knurl bolts are supplied. The wheels should then be fitted using the existing wheel nuts provided with the wheels. All fixing-accessories are included!
H&R Wheel Spacers 5mm 5x120 - Hub 72,5mm - Bolt size M12x1,5 - BMW
H&R DR-System Wheel spacers:- 5mm per spacer - 10mm per axle - Bolt pattern 5x120 - Hub 72,5mm - Bolt size M12x1,5 - BMW H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted between the wheel and the axial hub using longer wheel bolts (please order separately). When ordering the longer bolts please state which cone type you require and the required extra length. All screws for the DR Systems have to be ordered separately. Bolt size M14x1,5: BMW 765 (E65) BMW X3 Type X83 BMW X5 Type X53 Bolt size M14x1,25: BMW 5-Series GT/7-Series Type 701/7L BMW X5 M Type M7X (only for rear axle) BMW X6 (M) Type X70/M7X (only for rear axle)
H&R Wheel Spacers 5mm 5x120 - Hub 74,0mm - Bolt size M14x1,25 - BMW
H&R DR-System Wheel spacers:- 5mm per spacer - 10mm per axle - Bolt pattern 5x120 - Hub 74,0mm - Bolt size M14x1,25 - BMW H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted between the wheel and the axial hub using longer wheel bolts (please order separately). When ordering the longer bolts please state which cone type you require and the required extra length. All screws for the DR Systems have to be ordered separately. Bolt size M12x1,5: BMW M539 (E39) BMW 5/D (E39) Only for front axle: BMW X5 M Type M7X BMW X6 (M) Type X70/M7X
H&R Wheel Spacers 5mm 5x130 - Hub 71,6mm - Bolt size M14x1,5 - Porsche
H&R DR-System Wheel spacers:- 5mm per spacer - 10mm per axle - Bolt pattern 5x130 - Hub 71,6mm - Bolt size M14x1,5 - Porsche H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted between the wheel and the axial hub using longer wheel bolts (please order separately). When ordering the longer bolts please state which cone type you require and the required extra length. All screws for the DR Systems have to be ordered separately.
H&R Wheel Spacers 5mm 5x98 - Hub 58,0mm - Bolt size M12/14x1,25/1,5 - Alfa Romeo/Citroen/Fiat/Lancia/Opel/Vauxhall/Peugeot
H&R DR-System Wheel spacers:- 5mm per spacer - 10mm per axle - Bolt pattern 5x98 - Hub 58,0mm - Bolt size M12/14x1,25/1,5 - Alfa Romeo/Citroen/Fiat/Lancia/Opel/Vauxhall/Peugeot H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted between the wheel and the axial hub using longer wheel bolts (please order separately). When ordering the longer bolts please state which cone type you require and the required extra length. All screws for the DR Systems have to be ordered separately. Bolt size M12x1,25 Lancia Kappa Opel/Vauxhall Alfa Romeo Bolt size M14x1,5: Citroën Evasion 22 & C8 Fiat Ulysse 220/179 Lancia Zeta 220 & Phedra 179 Peugeot 806/807