In this category you will find wheel spacers of the well-known brand H&R. By increasing the track width, not only the appearance is improved, but you also achieve an improved road holding in combination with a higher stability, because the role of the chassis is influenced in a positive way. If you install wheel spacers, the car looks wider and better, while the wheel fills the wheelhouse.
If you can not find certain wheel spacers in our webshop, ask one of our employees.
H&R DR-System Wheelspacers 5mm 5x114,3 - Hub 66,0mm - Bolt size M12x1,5 - Nissan
H&R DR-System Wheel spacers:- 5mm per spacer - 10mm per axle - Bolt pattern 5x114,3 - Hub 66,0mm - Bolt size M12x1,5 - Nissan H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted between the wheel and the axial hub using longer wheel bolts (please order separately). When ordering the longer bolts please state which cone type you require and the required extra length. All screws for the DR Systems have to be ordered separately. Remark: Not usable with steel rims
H&R DR-System Wheelspacers 5mm 5x114,3 - Hub 68,0mm - Bolt size M12x1,5 - Lotus
H&R DR-System Wheel spacers:- 5mm per spacer - 10mm per axle - Bolt pattern 5x114,3 - Hub 68,0mm - Bolt size M12x1,5 - Lotus H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted between the wheel and the axial hub using longer wheel bolts (please order separately). When ordering the longer bolts please state which cone type you require and the required extra length. All screws for the DR Systems have to be ordered separately.
H&R DR-System Wheelspacers 5mm 5x120 - Hub 65,0mm - Bolt size M14x1,50 - Volkswagen
H&R DR-System Wheel spacers:- 5mm per spacer - 10mm per axle - Bolt pattern 5x120 - Hub 65,0mm - Bolt size M12x1,50 - Volkswagen H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted between the wheel and the axial hub using longer wheel bolts (please order separately). When ordering the longer bolts please state which cone type you require and the required extra length. All screws for the DR Systems have to be ordered separately.
H&R DR-System Wheelspacers 5mm 5x120 - Hub 65,0mm - Bolt size M14x1,50 - Volkswagen - Black
H&R DR-System Wheel spacers:- 5mm per spacer - 10mm per axle - Bolt pattern 5x120 - Hub 65,0mm - Bolt size M12x1,50 - Volkswagen - Black H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted between the wheel and the axial hub using longer wheel bolts (please order separately). When ordering the longer bolts please state which cone type you require and the required extra length. All screws for the DR Systems have to be ordered separately.
H&R DR-System Wheelspacers 5mm 5x120 - Hub 72,5mm - Bolt size M14x1,25 - BMW/Mini
H&R DR-System Wheel spacers:- 5mm per spacer - 10mm per axle - Bolt pattern 5x120 - Hub 72,5mm - Bolt size M14x1,25 - BMW/Mini H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted between the wheel and the axial hub using longer wheel bolts (please order separately). When ordering the longer bolts please state which cone type you require and the required extra length. All screws for the DR Systems have to be ordered separately. Remark: Not usable with steel rims
H&R DR-System Wheelspacers 5mm 5x120 - Hub 74,0mm - Bolt size M14x1,25 - BMW
H&R DR-System Wheel spacers:- 5mm per spacer - 10mm per axle - Bolt pattern 5x120 - Hub 74;0mm - Bolt size M14x1,25 - BMW H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength; lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted between the wheel and the axial hub using longer wheel bolts (please order separately). When ordering the longer bolts please state which cone type you require and the required extra length. All screws for the DR Systems have to be ordered separately. Remark: Not usable with steel rims Only installation on the front axle (ask for more detailed info)
H&R DR-System Wheelspacers 5mm 5x120,65 - Hub 70,2mm - Bolt size M12x1,5 - Chevrolet
H&R DR-System Wheel spacers:- 5mm per spacer - 10mm per axle - Bolt pattern 5x120,65 - Hub 70,2mm - Bolt size M12x1,5 - Chevrolet H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted between the wheel and the axial hub using longer wheel bolts (please order separately). When ordering the longer bolts please state which cone type you require and the required extra length. All screws for the DR Systems have to be ordered separately.
H&R DR-System Wheelspacers 5mm 5x130 - Hub 71,6mm - Bolt size M14x1,5 - Porsche
H&R DR-System Wheel spacers:- 5mm per spacer - 10mm per axle - Bolt pattern 5x130 - Hub 71,6mm - Bolt size M14x1,5 - Porsche H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted between the wheel and the axial hub using longer wheel bolts (please order separately). When ordering the longer bolts please state which cone type you require and the required extra length. All screws for the DR Systems have to be ordered separately. Remark: Not usable with steel rims
H&R DR-System Wheelspacers 5mm 5x98 - Hub 58,0mm - Bolt size M12x1,25 - Alfa/Fiat
H&R DR-System Wheel spacers:- 5mm per spacer - 10mm per axle - Bolt pattern 5x98 - Hub 58,0mm - Bolt size M12x1,25 - Alfa/Fiat H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted between the wheel and the axial hub using longer wheel bolts (please order separately). When ordering the longer bolts please state which cone type you require and the required extra length. All screws for the DR Systems have to be ordered separately. Remark: Not usable with steel rims
H&R DR-System Wheelspacers 6mm 5x114,3 - Hub 67,0mm - Bolt size M14x1,5 - Ferrari
H&R DR-System Wheel spacers:- 6mm per spacer - 12mm per axle - Bolt pattern 5x114,3 - Hub 67,0mm - Bolt size M14x1,5 - Ferrari H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted between the wheel and the axial hub using longer wheel bolts (please order separately). When ordering the longer bolts please state which cone type you require and the required extra length. All screws for the DR Systems have to be ordered separately.
H&R DR-System Wheelspacers 6mm 5x114,3 - Hub 67,0mm - Bolt size M14x1,5 - Ferrari - Black
H&R DR-System Wheel spacers:- 6mm per spacer - 12mm per axle - Bolt pattern 5x114,3 - Hub 67,0mm - Bolt size M14x1,5 - Ferrari - Black H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted between the wheel and the axial hub using longer wheel bolts (please order separately). When ordering the longer bolts please state which cone type you require and the required extra length. All screws for the DR Systems have to be ordered separately.
H&R DR-System Wheelspacers 7mm 5x114,3 - Hub 60,1mm - Bolt size M12x1,5 - Toyota
H&R DR-System Wheel spacers:- 7mm per spacer - 14mm per axle - Bolt pattern 5x114,3 - Hub 60,1mm - Bolt size M12x1,5 - Toyota H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted between the wheel and the axial hub using longer wheel bolts (please order separately). When ordering the longer bolts please state which cone type you require and the required extra length. All screws for the DR Systems have to be ordered separately.
H&R DR-System Wheelspacers 7mm 5x114,3 - Hub 60,1mm - Bolt size M12x1,5 - Toyota - Black
H&R DR-System Wheel spacers:- 7mm per spacer - 14mm per axle - Bolt pattern 5x114,3 - Hub 60,1mm - Bolt size M12x1,5 - Toyota - Black H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted between the wheel and the axial hub using longer wheel bolts (please order separately). When ordering the longer bolts please state which cone type you require and the required extra length. All screws for the DR Systems have to be ordered separately.
H&R DR-System Wheelspacers 7mm 5x130 - Hub 71,6mm - Bolt size M14x1,5 - Porsche/Bentley/Audi
H&R DR-System Wheel spacers:- 7mm per spacer - 14mm per axle - Bolt pattern 5x130 - Hub 71,6mm - Bolt size M14x1,5 - Porsche/Bentley/Audi H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted between the wheel and the axial hub using longer wheel bolts (please order separately). When ordering the longer bolts please state which cone type you require and the required extra length. All screws for the DR Systems have to be ordered separately.
H&R DR-System Wheelspacers 8mm 5x100 - Hub 57,1mm - Bolt size M14x1,5 - Audi/Seat/Skoda/Volkswagen
H&R DR-System Wheel spacers:- 8mm per spacer - 16mm per axle - Bolt pattern 5x100 - Hub 57,1mm - Bolt size M14x1,5 - Audi/Seat/Skoda/Volkswagen H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted between the wheel and the axial hub using longer bolt snot supplied (please order separately). When ordering the longer bolts please state which cone type you require and the required extra length. All screws for the DR Systems have to be ordered separately. Remark: Not usable with steel rims Only installation on the front axle (ask for more detailed info)
H&R DR-System Wheelspacers 8mm 5x108 - Hub 60,1mm - Bolt size M12x1,5 - Mercedes
H&R DR-System Wheel spacers:- 8mm per spacer - 16mm per axle - Bolt pattern 5x108 - Hub 60,1mm - Bolt size M12x1,5 - Mercedes H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted between the wheel and the axial hub using longer wheel bolts (please order separately). When ordering the longer bolts please state which cone type you require and the required extra length. All screws for the DR Systems have to be ordered separately. Remark: Not usable with steel rims Only installation on the rear axle (ask for more detailed info)
H&R DR-System Wheelspacers 8mm 5x112 - Hub 57,1mm - Bolt size M14x1,5 - Audi/Seat/Skoda/Volkswagen/Ford
H&R DR-System Wheel spacers:- 8mm per spacer - 16mm per axle - Bolt pattern 5x112 - Hub 57,1mm - Bolt size M14x1,5 - Audi/Seat/Skoda/Volkswagen/Ford H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted between the wheel and the axial hub using longer bolt snot supplied (please order separately). When ordering the longer bolts please state which cone type you require and the required extra length. All screws for the DR Systems have to be ordered separately. Remark: Not usable with steel rims H&R DR-System Wheel spacers:- 8mm per spacer - 16mm per axle - Bolt pattern 5x112 - Hub 57,1mm - Bolt size M14x1,5 - Audi/Seat/Skoda/Volkswagen H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted between the wheel and the axial hub using longer bolt snot supplied (please order separately). When ordering the longer bolts please state which cone type you require and the required extra length. All screws for the DR Systems have to be ordered separately. Remark: Not usable with steel rims
H&R DR-System Wheelspacers 8mm 5x112 - Hub 57,1mm - Bolt size M14x1,5 - Audi/Seat/Volkswagen
H&R DR-System Wheel spacers:- 8mm per spacer - 16mm per axle - Bolt pattern 5x112 - Hub 57,1mm - Bolt size M14x1,5 - Audi/Seat/Volkswagen H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted between the wheel and the axial hub using longer bolt snot supplied (please order separately). When ordering the longer bolts please state which cone type you require and the required extra length. All screws for the DR Systems have to be ordered separately. Remark: Not usable with steel rims
H&R DR-System Wheelspacers 8mm 5x112 - Hub 57,1mm - Bolt size M14x1,5 - Seat/Skoda/Volkswagen/Audi
H&R DR-System Wheel spacers:- 8mm per spacer - 16mm per axle - Bolt pattern 5x112 - Hub 57,1mm - Bolt size M14x1,5 - Seat/Skoda/Volkswagen/Audi/Cupra H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted between the wheel and the axial hub using longer bolt snot supplied (please order separately). When ordering the longer bolts please state which cone type you require and the required extra length. All screws for the DR Systems have to be ordered separately. Remark: Not usable with steel rims
H&R DR-System Wheelspacers 8mm 5x112 - Hub 66,5mm - Bolt size M14x1,5 - Audi/Volkswagen
H&R DR-System Wheel spacers:- 8mm per spacer - 16mm per axle - Bolt pattern 5x112 - Hub 66,5mm - Bolt size M14x1,5 - Audi/Volkswagen H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted between the wheel and the axial hub using longer bolt snot supplied (please order separately). When ordering the longer bolts please state which cone type you require and the required extra length. All screws for the DR Systems have to be ordered separately. Remark: Not usable with steel rims
H&R DR-System Wheelspacers 8mm 5x112 - Hub 66,5mm - Bolt size M14x1,5 - Audi/Volkswagen - Black
H&R DR-System Wheel spacers:- 8mm per spacer - 16mm per axle - Bolt pattern 5x112 - Hub 66,5mm - Bolt size M14x1,5 - Audi/Volkswagen - Black H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted between the wheel and the axial hub using longer bolt snot supplied (please order separately). When ordering the longer bolts please state which cone type you require and the required extra length. All screws for the DR Systems have to be ordered separately. Remark: Not usable with steel rims
H&R DR-System Wheelspacers 8mm 5x114,3 - Hub 66,0mm - Bolt size M12x1,5 - Nissan
H&R DR-System Wheel spacers:- 8mm per spacer - 16mm per axle - Bolt pattern 5x114,3 - Hub 66,0mm - Bolt size M12x1,5 - Nissan H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted between the wheel and the axial hub using longer wheel bolts (please order separately). When ordering the longer bolts please state which cone type you require and the required extra length. All screws for the DR Systems have to be ordered separately. Remark: Not usable with steel rims Only installation on the front axle (ask for more detailed info)
H&R DR-System Wheelspacers 9mm 5x127 - Hub 71,6mm - Bolt size M14x1,5 - Jeep
H&R DR-System Wheel spacers:- 9mm per spacer - 18mm per axle - Bolt pattern 5x127 - Hub 71,6mm - Bolt size M14x1,5 - Jeep H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted between the wheel and the axial hub using longer wheel bolts (please order separately). When ordering the longer bolts please state which cone type you require and the required extra length. All screws for the DR Systems have to be ordered separately. Remark: Not usable with steel rims
H&R DRA PCD Adapter-System 22mm 5x112-5x112 - Hub 66.5mm->57,1mm - Bolt size M14x1.50
H&R DRA PCD Adapter-System 44mm per axle - Bolt pattern 5x112-5x112 - Hub 66.5mm->57,1mm - Bolt size M14x1.50 H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted to the axial hub using the fastening bolts provided. The wheels should then be fitted using the existing wheel bolts provided with the wheels. The length of the existing screw sticking out of the rim, must necessarily be smaller than the width of the wheel spacer! All fixing-accessories are included! Adapter 50mm per axle Bolt size M14x1.50 Bolt pattern from 5x112 to 5x112 Hub from 66,5mm to 57,1mm
H&R DRA-System Wheelspacers 20mm 4x100 - Hub 57,1mm - Bolt size M12x1,5 - Seat/Volkswagen
H&R DRA-System Wheel spacers:- 20mm per spacer - 40mm per axle - Bolt pattern 4x100 - Hub 57,1mm - Bolt size M12x1,5 - Seat/Volkswagen H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted to the axial hub using the fastening bolts provided. The wheels should then be fitted using the existing wheel bolts provided with the wheels. The length of the existing screw sticking out of the rim, must necessarily be smaller than the width of the wheel spacer! All fixing-accessories are included! Remark: Not usable with steel rims
H&R DRA-System Wheelspacers 20mm 4x100 - Hub 57,1mm - Bolt size M12x1,5 - Seat/Volkswagen - Black
H&R DRA-System Wheel spacers:- 20mm per spacer - 40mm per axle - Bolt pattern 4x100 - Hub 57,1mm - Bolt size M12x1,5 - Seat/Volkswagen - Black H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted to the axial hub using the fastening bolts provided. The wheels should then be fitted using the existing wheel bolts provided with the wheels. The length of the existing screw sticking out of the rim, must necessarily be smaller than the width of the wheel spacer! All fixing-accessories are included! Remark: Not usable with steel rims
H&R DRA-System Wheelspacers 20mm 4x108 - Hub 57,1mm - Bolt size M14x1,5 - Audi
H&R DRA-System Wheel spacers:- 20mm per spacer - 40mm per axle - Bolt pattern 4x108 - Hub 57,1mm - Bolt size M14x1,5 - Audi H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted to the axial hub using the fastening bolts provided. The wheels should then be fitted using the existing wheel bolts provided with the wheels. The length of the existing screw sticking out of the rim, must necessarily be smaller than the width of the wheel spacer! All fixing-accessories are included!
H&R DRA-System Wheelspacers 20mm 4x108 - Hub 57,1mm - Bolt size M14x1,5 - Audi - Black
H&R DRA-System Wheel spacers:- 20mm per spacer - 40mm per axle - Bolt pattern 4x108 - Hub 57,1mm - Bolt size M14x1,5 - Audi - Black H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted to the axial hub using the fastening bolts provided. The wheels should then be fitted using the existing wheel bolts provided with the wheels. The length of the existing screw sticking out of the rim, must necessarily be smaller than the width of the wheel spacer! All fixing-accessories are included!
H&R DRA-System Wheelspacers 20mm 4x98 - Hub 58,0mm - Bolt size M12x1,25 - Fiat
H&R DRA-System Wheel spacers:- 20mm per spacer - 40mm per axle - Bolt pattern 4x98 - Hub 58,0mm - Bolt size M12x1,25 - Fiat H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted to the axial hub using the fastening bolts provided. The wheels should then be fitted using the existing wheel bolts provided with the wheels. The length of the existing screw sticking out of the rim, must necessarily be smaller than the width of the wheel spacer! All fixing-accessories are included!
H&R DRA-System Wheelspacers 20mm 5x100 - Hub 54,1mm - Bolt size M12x1,5 - Audi/Seat/Skoda
H&R DRA-System Wheel spacers:- 20mm per spacer - 40mm per axle - Bolt pattern 5x100 - Hub 54,1mm - Bolt size M12x1,5 - Audi/Seat/Skoda H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted to the axial hub using the fastening bolts provided. The wheels should then be fitted using the existing wheel bolts provided with the wheels. The length of the existing screw sticking out of the rim, must necessarily be smaller than the width of the wheel spacer! All fixing-accessories are included!
H&R DRA-System Wheelspacers 20mm 5x100 - Hub 54,1mm - Bolt size M12x1,5 - Audi/Seat/Skoda - Black
H&R DRA-System Wheel spacers:- 20mm per spacer - 40mm per axle - Bolt pattern 5x100 - Hub 54,1mm - Bolt size M12x1,5 - Audi/Seat/Skoda - Black H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted to the axial hub using the fastening bolts provided. The wheels should then be fitted using the existing wheel bolts provided with the wheels. The length of the existing screw sticking out of the rim, must necessarily be smaller than the width of the wheel spacer! All fixing-accessories are included!
H&R DRA-System Wheelspacers 20mm 5x110 - Hub 65,0mm - Bolt size M12x1,25 - Alfa Romeo
H&R DRA-System Wheel spacers:- 20mm per spacer - 40mm per axle - Bolt pattern 5x110 - Hub 65,0mm - Bolt size M12x1,25 - Alfa Romeo H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted to the axial hub using the fastening bolts provided. The wheels should then be fitted using the existing wheel bolts provided with the wheels. The length of the existing screw sticking out of the rim, must necessarily be smaller than the width of the wheel spacer! All fixing-accessories are included!
H&R DRA-System Wheelspacers 20mm 5x110 - Hub 65,0mm - Bolt size M14x1,5 - Alfa/Jeep/Opel
H&R DRA-System Wheel spacers:- 20mm per spacer - 40mm per axle - Bolt pattern 5x110 - Hub 65,0mm - Bolt size M14x1,5 - Alfa/Jeep/Opel H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted to the axial hub using the fastening bolts provided. The wheels should then be fitted using the existing wheel bolts provided with the wheels. The length of the existing screw sticking out of the rim, must necessarily be smaller than the width of the wheel spacer! All fixing-accessories are included! Remark: Not usable with steel rims
H&R DRA-System Wheelspacers 20mm 5x112 - Hub 57,1mm - Bolt size M14x1,5 - Volkswagen
H&R DRA-System Wheel spacers:- 20mm per spacer - 40mm per axle - Bolt pattern 5x112 - Hub 57,1mm - Bolt size M14x1,5 - Volkswagen H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted to the axial hub using the fastening bolts provided. The wheels should then be fitted using the existing wheel bolts provided with the wheels. The length of the existing screw sticking out of the rim, must necessarily be smaller than the width of the wheel spacer! All fixing-accessories are included! Remark: Not usable with steel rims
H&R DRA-System Wheelspacers 20mm 5x112 - Hub 57,1mm - Bolt size M14x1,5 - Volkswagen - Black
H&R DRA-System Wheel spacers:- 20mm per spacer - 40mm per axle - Bolt pattern 5x112 - Hub 57,1mm - Bolt size M14x1,5 - Volkswagen - Black H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted to the axial hub using the fastening bolts provided. The wheels should then be fitted using the existing wheel bolts provided with the wheels. The length of the existing screw sticking out of the rim, must necessarily be smaller than the width of the wheel spacer! All fixing-accessories are included! Remark: Not usable with steel rims
H&R DRA-System Wheelspacers 20mm 5x112 - Hub 66,5mm - Bolt size M14x1,5 - Audi
H&R DRA-System Wheel spacers:- 20mm per spacer - 40mm per axle - Bolt pattern 5x112 - Hub 66,5mm - Bolt size M14x1,5 - Audi H&R TRAK+ Wheels Spacers improve the look as well as the handling of your car with wheel spacers. TRAK+TM wheel spacers are compatible with both the stock and aftermarket wheels. Product benefits: High strength, lightweight aluminum/magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Delivered with approval The ABE sets include mounting material and wheel locks Produced in Germany The wheel spacer should be fitted to the axial hub using the fastening bolts provided. The wheels should then be fitted using the existing wheel bolts provided with the wheels. The length of the existing screw sticking out of the rim, must necessarily be smaller than the width of the wheel spacer! All fixing-accessories are included!