Akrapovič AUDI RS6 C8 Exhaust System Evolution Line (titanium) OPF/GPF 2020   Power+11.6 kW at 6150 rpm Torque+17.9 Nm at 6150 rpm Manufactured using high-grade lightweight titanium, the Evolution Line exhaust system features a specially designed layout with one central and two side mufflers and a collector made from titanium, all leading from stainless steel link pipes with a larger diameter compared to stock and custom-made flex tubes, fully insulated where they attach to the downpipes. A valve on each side muffler controls the flow of gases and aids the fantastic sound produced by the system. Each valve has a housing cast in Akrapovič’s in-house foundry, as does the complex active X-connection, which also features a valve for controlling the gas-flow from both sides of the engine. The system is finished with unique carbon fibre/titanium tailpipes – one on each side – with an eye-catching design that has never been used before, with the handmade dynamically shaped carbon fibre outer sleeve perfectly aligned with the sandblasted and coated titanium inner, all giving a powerful and sporty conclusion to this stunning exhaust system. Designed to supply a soundtrack that has been acoustically tuned to perfection at every rev point to give an aural delight from the low-down rumble, through a strong mid-range and onto a high frequency top end with distinctive feel of Akrapovič’s racing heritage, all added to the increased excitement where every downshift is accompanied a sharp rumble. The system has been tuned to provide the occupants the comfort of driving like an everyday commuter with no unwanted drone or excessive noise. Akrapovič has conducted tests on its in-house dyno with the Evolution Line (Titanium) exhaust system, using an Audi RS 6 Avant (C8) with the stock Audi Sport exhaust system for comparison, and a power gain of 15.7 hp (m) at 6150 rpm and a torque increase of 17.9 Nm at 6150 rpm were achieved under controlled conditions and with a weight saving of over 30% against the stock system. This is an ECE compliant system that is a serious performer in all areas. Further changes can be made with the addition of the optional Downpipe / Link pipe set (SS), increased exhaust tuning, and the optional Akrapovič Sound Kit to control the valves in the exhaust and give greater flexibility in the sound the exhaust produces. To give the Evolution Line (Titanium) an even greater visual impact, a handmade carbon fibre diffuser in matte or glossy is available as an option to provide that special finish. The Link pipe set (SS) L-AU/SS/6 is a mandatory product to the Evolution Line (Titanium) S-AU/TI/15H. The system is split into two codes because of packaging requirements. If the Evolution Line exhaust system is combined with the Downpipe / Link pipe set (SS), the link pipe set L-AU/SS/6 is not needed. In this case, the ECE type approval is not valid anymore, and remapping the ECU is mandatory when it is fitted. With the installation of Akrapovič Sound Kit, ECE type approval for the Evolution Line (Titanium) exhaust system is not valid.   ECE type approval is only valid for cars equipped with otto/gasoline particulate filter.

Akrapovič AUDI RS6 C8 Exhaust System Evolution Line (titanium) OPF/GPF 2020   Power+11.6 kW at 6150 rpm Torque+17.9 Nm at 6150 rpm Manufactured using high-grade lightweight titanium, the Evolution Line exhaust system features a specially designed layout with one central and two side mufflers and a collector made from titanium, all leading from stainless steel link pipes with a larger diameter compared to stock and custom-made flex tubes, fully insulated where they attach to the downpipes. A valve on each side muffler controls the flow of gases and aids the fantastic sound produced by the system. Each valve has a housing cast in Akrapovič’s in-house foundry, as does the complex active X-connection, which also features a valve for controlling the gas-flow from both sides of the engine. The system is finished with unique carbon fibre/titanium tailpipes – one on each side – with an eye-catching design that has never been used before, with the handmade dynamically shaped carbon fibre outer sleeve perfectly aligned with the sandblasted and coated titanium inner, all giving a powerful and sporty conclusion to this stunning exhaust system. Designed to supply a soundtrack that has been acoustically tuned to perfection at every rev point to give an aural delight from the low-down rumble, through a strong mid-range and onto a high frequency top end with distinctive feel of Akrapovič’s racing heritage, all added to the increased excitement where every downshift is accompanied a sharp rumble. The system has been tuned to provide the occupants the comfort of driving like an everyday commuter with no unwanted drone or excessive noise. Akrapovič has conducted tests on its in-house dyno with the Evolution Line (Titanium) exhaust system, using an Audi RS 6 Avant (C8) with the stock Audi Sport exhaust system for comparison, and a power gain of 15.7 hp (m) at 6150 rpm and a torque increase of 17.9 Nm at 6150 rpm were achieved under controlled conditions and with a weight saving of over 30% against the stock system. This is an ECE compliant system that is a serious performer in all areas. Further changes can be made with the addition of the optional Downpipe / Link pipe set (SS), increased exhaust tuning, and the optional Akrapovič Sound Kit to control the valves in the exhaust and give greater flexibility in the sound the exhaust produces. To give the Evolution Line (Titanium) an even greater visual impact, a handmade carbon fibre diffuser in matte or glossy is available as an option to provide that special finish. The Link pipe set (SS) L-AU/SS/6 is a mandatory product to the Evolution Line (Titanium) S-AU/TI/15H. The system is split into two codes because of packaging requirements. If the Evolution Line exhaust system is combined with the Downpipe / Link pipe set (SS), the link pipe set L-AU/SS/6 is not needed. In this case, the ECE type approval is not valid anymore, and remapping the ECU is mandatory when it is fitted. With the installation of Akrapovič Sound Kit, ECE type approval for the Evolution Line (Titanium) exhaust system is not valid.   ECE type approval is only valid for cars equipped with otto/gasoline particulate filter.

Akrapovič AUDI RS6 C8 Exhaust System Evolution Line (titanium) OPF/GPF 2020   Power+11.6 kW at 6150 rpm Torque+17.9 Nm at 6150 rpm Manufactured using high-grade lightweight titanium, the Evolution Line exhaust system features a specially designed layout with one central and two side mufflers and a collector made from titanium, all leading from stainless steel link pipes with a larger diameter compared to stock and custom-made flex tubes, fully insulated where they attach to the downpipes. A valve on each side muffler controls the flow of gases and aids the fantastic sound produced by the system. Each valve has a housing cast in Akrapovič’s in-house foundry, as does the complex active X-connection, which also features a valve for controlling the gas-flow from both sides of the engine. The system is finished with unique carbon fibre/titanium tailpipes – one on each side – with an eye-catching design that has never been used before, with the handmade dynamically shaped carbon fibre outer sleeve perfectly aligned with the sandblasted and coated titanium inner, all giving a powerful and sporty conclusion to this stunning exhaust system. Designed to supply a soundtrack that has been acoustically tuned to perfection at every rev point to give an aural delight from the low-down rumble, through a strong mid-range and onto a high frequency top end with distinctive feel of Akrapovič’s racing heritage, all added to the increased excitement where every downshift is accompanied a sharp rumble. The system has been tuned to provide the occupants the comfort of driving like an everyday commuter with no unwanted drone or excessive noise. Akrapovič has conducted tests on its in-house dyno with the Evolution Line (Titanium) exhaust system, using an Audi RS 6 Avant (C8) with the stock Audi Sport exhaust system for comparison, and a power gain of 15.7 hp (m) at 6150 rpm and a torque increase of 17.9 Nm at 6150 rpm were achieved under controlled conditions and with a weight saving of over 30% against the stock system. This is an ECE compliant system that is a serious performer in all areas. Further changes can be made with the addition of the optional Downpipe / Link pipe set (SS), increased exhaust tuning, and the optional Akrapovič Sound Kit to control the valves in the exhaust and give greater flexibility in the sound the exhaust produces. To give the Evolution Line (Titanium) an even greater visual impact, a handmade carbon fibre diffuser in matte or glossy is available as an option to provide that special finish. The Link pipe set (SS) L-AU/SS/6 is a mandatory product to the Evolution Line (Titanium) S-AU/TI/15H. The system is split into two codes because of packaging requirements. If the Evolution Line exhaust system is combined with the Downpipe / Link pipe set (SS), the link pipe set L-AU/SS/6 is not needed. In this case, the ECE type approval is not valid anymore, and remapping the ECU is mandatory when it is fitted. With the installation of Akrapovič Sound Kit, ECE type approval for the Evolution Line (Titanium) exhaust system is not valid.   ECE type approval is only valid for cars equipped with otto/gasoline particulate filter.

Akrapovič AUDI RS6 C8 Exhaust System Evolution Line (titanium) OPF/GPF 2020   Power+11.6 kW at 6150 rpm Torque+17.9 Nm at 6150 rpm Manufactured using high-grade lightweight titanium, the Evolution Line exhaust system features a specially designed layout with one central and two side mufflers and a collector made from titanium, all leading from stainless steel link pipes with a larger diameter compared to stock and custom-made flex tubes, fully insulated where they attach to the downpipes. A valve on each side muffler controls the flow of gases and aids the fantastic sound produced by the system. Each valve has a housing cast in Akrapovič’s in-house foundry, as does the complex active X-connection, which also features a valve for controlling the gas-flow from both sides of the engine. The system is finished with unique carbon fibre/titanium tailpipes – one on each side – with an eye-catching design that has never been used before, with the handmade dynamically shaped carbon fibre outer sleeve perfectly aligned with the sandblasted and coated titanium inner, all giving a powerful and sporty conclusion to this stunning exhaust system. Designed to supply a soundtrack that has been acoustically tuned to perfection at every rev point to give an aural delight from the low-down rumble, through a strong mid-range and onto a high frequency top end with distinctive feel of Akrapovič’s racing heritage, all added to the increased excitement where every downshift is accompanied a sharp rumble. The system has been tuned to provide the occupants the comfort of driving like an everyday commuter with no unwanted drone or excessive noise. Akrapovič has conducted tests on its in-house dyno with the Evolution Line (Titanium) exhaust system, using an Audi RS 6 Avant (C8) with the stock Audi Sport exhaust system for comparison, and a power gain of 15.7 hp (m) at 6150 rpm and a torque increase of 17.9 Nm at 6150 rpm were achieved under controlled conditions and with a weight saving of over 30% against the stock system. This is an ECE compliant system that is a serious performer in all areas. Further changes can be made with the addition of the optional Downpipe / Link pipe set (SS), increased exhaust tuning, and the optional Akrapovič Sound Kit to control the valves in the exhaust and give greater flexibility in the sound the exhaust produces. To give the Evolution Line (Titanium) an even greater visual impact, a handmade carbon fibre diffuser in matte or glossy is available as an option to provide that special finish. The Link pipe set (SS) L-AU/SS/6 is a mandatory product to the Evolution Line (Titanium) S-AU/TI/15H. The system is split into two codes because of packaging requirements. If the Evolution Line exhaust system is combined with the Downpipe / Link pipe set (SS), the link pipe set L-AU/SS/6 is not needed. In this case, the ECE type approval is not valid anymore, and remapping the ECU is mandatory when it is fitted. With the installation of Akrapovič Sound Kit, ECE type approval for the Evolution Line (Titanium) exhaust system is not valid.   ECE type approval is only valid for cars equipped with otto/gasoline particulate filter.

Akrapovič AUDI RS6 C8 Exhaust System Evolution Line (titanium) OPF/GPF 2020   Power+11.6 kW at 6150 rpm Torque+17.9 Nm at 6150 rpm Manufactured using high-grade lightweight titanium, the Evolution Line exhaust system features a specially designed layout with one central and two side mufflers and a collector made from titanium, all leading from stainless steel link pipes with a larger diameter compared to stock and custom-made flex tubes, fully insulated where they attach to the downpipes. A valve on each side muffler controls the flow of gases and aids the fantastic sound produced by the system. Each valve has a housing cast in Akrapovič’s in-house foundry, as does the complex active X-connection, which also features a valve for controlling the gas-flow from both sides of the engine. The system is finished with unique carbon fibre/titanium tailpipes – one on each side – with an eye-catching design that has never been used before, with the handmade dynamically shaped carbon fibre outer sleeve perfectly aligned with the sandblasted and coated titanium inner, all giving a powerful and sporty conclusion to this stunning exhaust system. Designed to supply a soundtrack that has been acoustically tuned to perfection at every rev point to give an aural delight from the low-down rumble, through a strong mid-range and onto a high frequency top end with distinctive feel of Akrapovič’s racing heritage, all added to the increased excitement where every downshift is accompanied a sharp rumble. The system has been tuned to provide the occupants the comfort of driving like an everyday commuter with no unwanted drone or excessive noise. Akrapovič has conducted tests on its in-house dyno with the Evolution Line (Titanium) exhaust system, using an Audi RS 6 Avant (C8) with the stock Audi Sport exhaust system for comparison, and a power gain of 15.7 hp (m) at 6150 rpm and a torque increase of 17.9 Nm at 6150 rpm were achieved under controlled conditions and with a weight saving of over 30% against the stock system. This is an ECE compliant system that is a serious performer in all areas. Further changes can be made with the addition of the optional Downpipe / Link pipe set (SS), increased exhaust tuning, and the optional Akrapovič Sound Kit to control the valves in the exhaust and give greater flexibility in the sound the exhaust produces. To give the Evolution Line (Titanium) an even greater visual impact, a handmade carbon fibre diffuser in matte or glossy is available as an option to provide that special finish. The Link pipe set (SS) L-AU/SS/6 is a mandatory product to the Evolution Line (Titanium) S-AU/TI/15H. The system is split into two codes because of packaging requirements. If the Evolution Line exhaust system is combined with the Downpipe / Link pipe set (SS), the link pipe set L-AU/SS/6 is not needed. In this case, the ECE type approval is not valid anymore, and remapping the ECU is mandatory when it is fitted. With the installation of Akrapovič Sound Kit, ECE type approval for the Evolution Line (Titanium) exhaust system is not valid.   ECE type approval is only valid for cars equipped with otto/gasoline particulate filter.

Akrapovič AUDI RS6 C8 Exhaust System Evolution Line (titanium) OPF/GPF 2020   Power+11.6 kW at 6150 rpm Torque+17.9 Nm at 6150 rpm Manufactured using high-grade lightweight titanium, the Evolution Line exhaust system features a specially designed layout with one central and two side mufflers and a collector made from titanium, all leading from stainless steel link pipes with a larger diameter compared to stock and custom-made flex tubes, fully insulated where they attach to the downpipes. A valve on each side muffler controls the flow of gases and aids the fantastic sound produced by the system. Each valve has a housing cast in Akrapovič’s in-house foundry, as does the complex active X-connection, which also features a valve for controlling the gas-flow from both sides of the engine. The system is finished with unique carbon fibre/titanium tailpipes – one on each side – with an eye-catching design that has never been used before, with the handmade dynamically shaped carbon fibre outer sleeve perfectly aligned with the sandblasted and coated titanium inner, all giving a powerful and sporty conclusion to this stunning exhaust system. Designed to supply a soundtrack that has been acoustically tuned to perfection at every rev point to give an aural delight from the low-down rumble, through a strong mid-range and onto a high frequency top end with distinctive feel of Akrapovič’s racing heritage, all added to the increased excitement where every downshift is accompanied a sharp rumble. The system has been tuned to provide the occupants the comfort of driving like an everyday commuter with no unwanted drone or excessive noise. Akrapovič has conducted tests on its in-house dyno with the Evolution Line (Titanium) exhaust system, using an Audi RS 6 Avant (C8) with the stock Audi Sport exhaust system for comparison, and a power gain of 15.7 hp (m) at 6150 rpm and a torque increase of 17.9 Nm at 6150 rpm were achieved under controlled conditions and with a weight saving of over 30% against the stock system. This is an ECE compliant system that is a serious performer in all areas. Further changes can be made with the addition of the optional Downpipe / Link pipe set (SS), increased exhaust tuning, and the optional Akrapovič Sound Kit to control the valves in the exhaust and give greater flexibility in the sound the exhaust produces. To give the Evolution Line (Titanium) an even greater visual impact, a handmade carbon fibre diffuser in matte or glossy is available as an option to provide that special finish. The Link pipe set (SS) L-AU/SS/6 is a mandatory product to the Evolution Line (Titanium) S-AU/TI/15H. The system is split into two codes because of packaging requirements. If the Evolution Line exhaust system is combined with the Downpipe / Link pipe set (SS), the link pipe set L-AU/SS/6 is not needed. In this case, the ECE type approval is not valid anymore, and remapping the ECU is mandatory when it is fitted. With the installation of Akrapovič Sound Kit, ECE type approval for the Evolution Line (Titanium) exhaust system is not valid.   ECE type approval is only valid for cars equipped with otto/gasoline particulate filter.

Alfa GTV Typ 916 system Uitgang rechts/links - 2x76 Typ 10 rechts/links Passend voor: Buisdiameter: Opmerkingen: Merk: FOX Levertijd: 1 tot 14 dagen

Alfa GTV Typ 916 system Uitgang rechts/links - 2x76 Typ 18 rechts/links Passend voor: Buisdiameter: Opmerkingen: Merk: FOX Levertijd: 1 tot 14 dagen

Alfa Romeo 145 1.3ie 1351 cc 66 Kw / 90 cv AR33501 Magnaflow CAT Bouwjaar: 1/94>12/96 Merk: Alfa Romeo Type: 145 1.3ie 1351 cc 66 Kw / 90 cv AR33501 Bouwjaar: 1/94>12/96 Fabrikant Magnaflow Product: CAT Fabrikant art. nummer: MF_80012 OBD not neaded,Euro I and II,Ref. OE:, 60590735, Levertijd 1 tot 2 weken

Alfa Romeo 145 1.4i 16V 1370 cc 77 Kw / 105 cv AR33503 Magnaflow CAT Bouwjaar: 1/97>8/00 Merk: Alfa Romeo Type: 145 1.4i 16V 1370 cc 77 Kw / 105 cv AR33503 Bouwjaar: 1/97>8/00 Fabrikant Magnaflow Product: CAT Fabrikant art. nummer: MF_80064 OBD not neaded,Euro I and II,Ref. OE:, 60626893, 60626894, 60630078, Levertijd 1 tot 2 weken

Alfa Romeo 145 1.4ie 1351 cc 66 Kw / 90 cv AR33501 Magnaflow CAT Bouwjaar: 1/94>12/96 Merk: Alfa Romeo Type: 145 1.4ie 1351 cc 66 Kw / 90 cv AR33501 Bouwjaar: 1/94>12/96 Fabrikant Magnaflow Product: CAT Fabrikant art. nummer: MF_80012 OBD not neaded,Euro I and II,Ref. OE:, 60590735, Levertijd 1 tot 2 weken

Alfa Romeo 145 1.6i 16V 1598 cc 89 Kw / 121 cv AR67601 Magnaflow CAT Bouwjaar: 1/97>8/00 Merk: Alfa Romeo Type: 145 1.6i 16V 1598 cc 89 Kw / 121 cv AR67601 Bouwjaar: 1/97>8/00 Fabrikant Magnaflow Product: CAT Fabrikant art. nummer: MF_80064 OBD not neaded,Euro I and II,Ref. OE:, 60626893, 60626894, 60630078, Levertijd 1 tot 2 weken

Alfa Romeo 145 1.6ie 1596 cc 76 Kw / 103 cv AR33201 Magnaflow CAT Bouwjaar: 1/94>12/96 Merk: Alfa Romeo Type: 145 1.6ie 1596 cc 76 Kw / 103 cv AR33201 Bouwjaar: 1/94>12/96 Fabrikant Magnaflow Product: CAT Fabrikant art. nummer: MF_80012 OBD not neaded,Euro I and II,Ref. OE:, 60590735, Levertijd 1 tot 2 weken

Alfa Romeo 145 1.7ie 16V 1712 cc 95 Kw / 129 cv AR33401 Magnaflow CAT Bouwjaar: 1/94>12/96 Merk: Alfa Romeo Type: 145 1.7ie 16V 1712 cc 95 Kw / 129 cv AR33401 Bouwjaar: 1/94>12/96 Fabrikant Magnaflow Product: CAT Fabrikant art. nummer: MF_80012 OBD not neaded,Euro I and II,Ref. OE:, 60590735, Levertijd 1 tot 2 weken

Alfa Romeo 145 1.8i 16V 1747 cc 104 Kw / 141 cv AR67106 Magnaflow CAT Bouwjaar: 11/96>8/00 Merk: Alfa Romeo Type: 145 1.8i 16V 1747 cc 104 Kw / 141 cv AR67106 Bouwjaar: 11/96>8/00 Fabrikant Magnaflow Product: CAT Fabrikant art. nummer: MF_80064 OBD not neaded,Euro I and II,Ref. OE:, 60626893, 60626894, 60630078, Levertijd 1 tot 2 weken

Alfa Romeo 145 1.9JTD 1910 cc 77 Kw / 105 cv Magnaflow CAT Bouwjaar: 4/99> Merk: Alfa Romeo Type: 145 1.9JTD 1910 cc 77 Kw / 105 cv Bouwjaar: 4/99> Fabrikant Magnaflow Product: CAT Fabrikant art. nummer: MF_81858D OBD not neaded,Euro I and II,Ref. OE:, 46475401, Levertijd 1 tot 2 weken

Alfa Romeo 145 1.9TD 1929 cc 66 Kw / 90 cv AR33601 Magnaflow CAT Bouwjaar: 8/94> Merk: Alfa Romeo Type: 145 1.9TD 1929 cc 66 Kw / 90 cv AR33601 Bouwjaar: 8/94> Fabrikant Magnaflow Product: CAT Fabrikant art. nummer: MF_80061D OBD not neaded,Euro I and II,Ref. OE:, 60812447, 7747286, Levertijd 1 tot 2 weken

Alfa Romeo 145 2.0i 16V 1970 cc 110 Kw / 150 cv AR67204 Magnaflow CAT Bouwjaar: 6/96> Merk: Alfa Romeo Type: 145 2.0i 16V 1970 cc 110 Kw / 150 cv AR67204 Bouwjaar: 6/96> Fabrikant Magnaflow Product: CAT Fabrikant art. nummer: MF_80064 OBD not neaded,Euro I and II,Ref. OE:, 60626893, 60626894, 60630078, Levertijd 1 tot 2 weken

Alfa Romeo 145 2.0i TS Q 16V Twin Spark 1970 cc 110 Kw / 150 cv Magnaflow CAT Bouwjaar: 9/95>12/96 Merk: Alfa Romeo Type: 145 2.0i TS Q 16V Twin Spark 1970 cc 110 Kw / 150 cv Bouwjaar: 9/95>12/96 Fabrikant Magnaflow Product: CAT Fabrikant art. nummer: MF_80020 OBD not neaded,Euro I and II,Ref. OE:, 46460001, 46477344, 60611770, 60653615, Levertijd 1 tot 2 weken

Alfa Romeo 145 Einddemper Ragazzon Motor type: 1.3 IE -1.6 IE - 1.7 16V 1994 > 1996 Ragazzon art. nr.: 61.0001.AD Product groep: Evo Line Specificaties: Adapter - For rear silencer assembly on original centre silencer

Alfa Romeo 145 Einddemper Ragazzon Motor type: 1.4 16V - 1.6 16V - 1.8 16V - 2.0 16V T.S. 06/1997>> Ragazzon art. nr.: 61.0005.AD Product groep: Evo Line Specificaties: Adapter - For rear silencer assembly on original centre silencer

Alfa Romeo 145 Einddemper Ragazzon Motor type: 2.0 - Twin Spark 05/1996 > 05/1997 Ragazzon art. nr.: 61.0005.AD Product groep: Evo Line Specificaties: Adapter - For rear silencer assembly on original centre silencer

Alfa Romeo 145 Einddemper Ragazzon Motor type: 1.9 JTD 1999>> Ragazzon art. nr.: 61.0027.AD Product groep: Evo Line Specificaties: Adapter - For rear silencer assembly on original centre silencer

Alfa Romeo 145 Einddemper Ragazzon Motor type: 1.3 IE -1.6 IE - 1.7 16V 1994 > 1996 Ragazzon art. nr.: 50.0001.80 Product groep: Evo Line Specificaties: Stainless steel centre silencer

Alfa Romeo 145 Einddemper Ragazzon Motor type: 2.0 - Twin Spark 05/1996 > 05/1997 Ragazzon art. nr.: 50.0002.80 Product groep: Evo Line Specificaties: Stainless steel centre silencer

Alfa Romeo 145 Einddemper Ragazzon Motor type: 1.4 16V - 1.6 16V - 1.8 16V - 2.0 16V T.S. 06/1997>> Ragazzon art. nr.: 50.0005.80 Product groep: Evo Line Specificaties: Stainless steel centre silencer with 1 silencer

Alfa Romeo 145 Einddemper Ragazzon Motor type: 1.9 JTD 1999>> Ragazzon art. nr.: 50.0022.80 Product groep: Evo Line Specificaties: Stainless steel centre silencer

Alfa Romeo 145 Einddemper Ragazzon Motor type: 1.4 16V - 1.6 16V - 1.8 16V - 2.0 16V T.S. 06/1997>> Ragazzon art. nr.: 18.0007.13 Product groep: H2 Flow Line Specificaties: Stainless steel rear silencer with oval Sport Line tail pipe 110 x 65 mm

Alfa Romeo 145 Einddemper Ragazzon Motor type: 1.3 IE -1.6 IE - 1.7 16V 1994 > 1996 Ragazzon art. nr.: 18.0007.13 Product groep: H2 Flow Line Specificaties: Stainless steel rear silencer with oval Sport Line tail pipe 110 x 65 mm

Alfa Romeo 145 Einddemper Ragazzon Motor type: 1.9 JTD 1999>> Ragazzon art. nr.: 18.0007.13 Product groep: H2 Flow Line Specificaties: Stainless steel rear silencer with oval Sport Line tail pipe 110 x 65 mm

Alfa Romeo 145 Einddemper Ragazzon Motor type: 2.0 - Twin Spark 05/1996 > 05/1997 Ragazzon art. nr.: 18.0007.13 Product groep: H2 Flow Line Specificaties: Stainless steel rear silencer with oval Sport Line tail pipe 110 x 65 mm

Alfa Romeo 145 Einddemper Ragazzon Motor type: 1.4 16V - 1.6 16V - 1.8 16V - 2.0 16V T.S. 06/1997>> Ragazzon art. nr.: 18.0007.60 Product groep: H2 Flow Line Specificaties: Stainless steel rear silencer with round Sport Line tail pipe 90 mm

Alfa Romeo 145 Einddemper Ragazzon Motor type: 1.3 IE -1.6 IE - 1.7 16V 1994 > 1996 Ragazzon art. nr.: 18.0007.60 Product groep: H2 Flow Line Specificaties: Stainless steel rear silencer with round Sport Line tail pipe 90 mm

Alfa Romeo 145 Einddemper Ragazzon Motor type: 1.9 JTD 1999>> Ragazzon art. nr.: 18.0007.60 Product groep: H2 Flow Line Specificaties: Stainless steel rear silencer with round Sport Line tail pipe 90 mm

Alfa Romeo 145 Einddemper Ragazzon Motor type: 2.0 - Twin Spark 05/1996 > 05/1997 Ragazzon art. nr.: 18.0007.60 Product groep: H2 Flow Line Specificaties: Stainless steel rear silencer with round Sport Line tail pipe 90 mm

Alfa Romeo 145 Einddemper Ragazzon Motor type: 1.4 16V - 1.6 16V - 1.8 16V - 2.0 16V T.S. 06/1997>> Ragazzon art. nr.: 50.0001.06 Product groep: Evo Line Specificaties: Stainless steel rear silencer with round tail pipe 102 mm