-
Audio
- Audio-Sets
- Autoradio
- CD, DVD & Fernsehern
- Carkits / Freisprecheinrichtungen
-
Eingebaut
- AUX / Adapter
- Zubehör
- Aktive Soundmodule
- Antennenzubehör
- Antennenadapter
- Antennen
- Antennenverlängerungskabel
- Audio-Montageplatten
- Kondensatoren
- FISCUBE Zubehör
- FM transmitter
- GPS-Antennen
- IMA Multimedia Adapter
- Kabel-Kits
- Kabel
- Lautsprecherbox
- Motor audio
- OEM Radio Adapter
- Pionierzubehör
- Radio Demontage
- Radio Gradientenkabel
- Sender
- Sicherungen
- Sicherungshalter
- iPod Zubehör
-
Lautsprechern
- 10 cm Lautsprechern
- 12 cm Lautsprechern
- 13 cm Lautsprechern
- 16 cm Lautsprechern
- 17 cm Lautsprechern
- 20 cm Lautsprechern
- 25 cm Lautsprechern
- 30 cm Lautsprechern
- 4 x 10 cm Lautsprechern
- 4 x 6 cm Lautsprechern
- 5 x 7 cm Lautsprechern
- 6 x 8 cm Lautsprechern
- 6 x 9 cm Lautsprechern
- 6 cm speakers
- 7 cm Lautsprechern
- 8 cm Lautsprechern
- Autospezifische Lautsprecher
- Compo-Sets
- Kopfhörer
- Benutzerdefinierte Lautsprecher-Kits
- Hochtöner
- Wasserfester Lautsprecher
- Subwoofern
- Verstärker
-
Verschiedenes
- Hinter dem Auto
- Apple Watch Bandjes
- Befestigungsmaterial
- Körper reparieren
- Tiere
- Verschiedenes
- Essen und Trinken
-
Werkzeuge
- Bitsätze
- Zündkerzenschlüssel
- Kompressor
- Steckschlüssel
- Filterschlüssel
- Werkzeugsätze
- Hämmer
- Inbus / Torx-Schraubenschlüssel
- Wagenheber
- Pinsel
- Winden
- Lauflampen
- Messer
- Meter
- Moersleutels
- Motorständer
- Anhängerheber
- Ölspritzkanne
- Pneumatisch
- Popnieten
- Ratschen
- Bandmaß
- Schere
- Schrauben Gewindereparatursätze
- Schraubendreher
- Schlauchklemmen
- Rundgewinde-Schneideisen
- Lötartikel
- Spannungssuche
- Stahlbürsten
- Doppelringschlüssel / Gabelschlüssel
- Staubsauger
- Zangen
- Bänder
- Testclips
- Tester
- Tie wraps
- Trichter / Krüge
- Federklemmen
- Fettpresse
- Wasserwaage
- Arbeitslampe
- Werkstatt Werkzeuge
- Werkstattprodukte
- Radschlüssel
- Sah
- Taschenlampen
- Abdeckung
- Kleidung
- OUTLET SHOP
- Speichern
- Rallye-Produkte
- Erholung & Urlaub
- Red Bull
- Sicherheit
- Farbe und Lack
-
Flüssigkeiten
- 5in1
- Additive
- Benzin-Dosen
- Destilliertes Wasser
- Handreiniger
- Injektionsreiniger
- Kanister / Mehrzweckwannen
- Kühlsystem Produkte
- Kühlmittel
- Liqui Moly
- Motorreiniger
- Ölzusätze
- Öle
- Reiniger
- Reiniger / Entfetter
- Brems- / Hydraulik- / Getriebeöl
- Scheibenwaschflüssigkeit
- Schmierstoffe
- Sprays
- Starter
- Trichter
- Fette
- Flüssigkeiten
- Flüssigkeitspumpen
- Werkstatt Produkte
- Unsorted
- Elektronik
- Exterieur
-
Interieur
-
Fahrer & Cockpit
- Armlehne
- Innenspiegel
- Bürostühle
- Carbon Interieurdelen
- Cockpit
- Dashboard
- Sicherheitsgurt Zubehör
- Sicherheitsgurt Abdeckung
- Sicherheitsgurt
- Feststellbremse
- Interieur Lijsten
- Pedale
- Schaltknauf
- Sportlenkrad
- Stühle
- Stuhlrahmen
- Sitzbezüge
- Lenkradadapter
- Lenkradabdeckungen
- Lenkrad Knöpfe
- Lenkradnaben
- Instrumenten anzeigen
- Komfort und Sicherheit
- Halter
- Kinderautositze
- Aufbewahrung
- Rallye-Produkte
- Styling und Luxus
- Sonnenschutz
-
Fahrer & Cockpit
-
Fahrgestell
- Luft- und elektronische Federung
- Bremsen
- Schokdemper
-
Gewindefahrwerke
- Gewindefahrwerke AP
- Gewindefahrwerke Bilstein
- Schroefsets Cobra
- Gewindefahrwerke Eibach
- Gewindefahrwerke H&R
- Gewindefahrwerke HD
- Gewindefahrwerke JOM
- Gewindefahrwerke KONI
- Gewindefahrwerke KW
- Schroefsets Ohlins
- Gewindefahrwerke SPAX
- Gewindefahrwerke ST
- Gewindefahrwerke TEIN
- Gewindefahrwerke VanSlam
- Gewindefahrwerke Vogtland
- Spurverbreiterungen und Adapter
- Sportfahrwerk
- Stabilisierung und Fahrverhalten
- Federn
- Ersatz und andere teile
- Performance
- Polituren
-
Beleuchtung
- Verschiedenes
- Scheinwerfer und Rücklichter
- LED und Neon
-
Lampen
- 880 lampen
- 881 lampen
- 893 lampen
- 9005xs lampen
- 9006xs lampen
- BA15D Sockel
- BA15S Sockel
- BA9S Sockel
- BAT9S Sockel
- BAU15S Sockel
- BAX10S Sockel
- BAX9S Sockel
- BAY15D Sockel
- BAZ15D Sockel
- Leuchtstoffröhre
- Duplo lampen
- Glühbirne Set Wohnwagen
- H1 lampen
- H10 lampen
- H11 lampen
- H11B lampen
- H13 lampen
- H15 lampen
- H16 lampen
- H2 lampen
- H3 lampen
- H3C lampen
- H4 lampen
- H7 lampen
- H8 lampen
- H9 lampen
- HB1 lampen
- HB3 lampen
- HB4 lampen
- HB5 lampen
- HS1 lampen
- HiR2/9012 lampen
- Osram
- Andere
- P13W lampen
- P21W Sockel
- P27/7W
- P45T Sockel
- PR21/5W
- PR21W
- PS19W
- PSX24W lampen
- PSY24W lampen
- PY21W Sockel
- PY24
- R2 lampen
- R702K lampen
- S25 Sockel
- SV8 Sockel
- Scooter-Lampen
- T10 Sockel
- T15 W16W
- T16 Sockel
- T20 Sockel
- T25 Sockel
- T2W Sockel
- T4W Sockel
- T5 Sockel
- W21/5W Sockel
- W21W lampen
- Beleuchtungseinheiten
- Xenon
- Felgen
- Winter & Saison
Produkte filtern
Hersteller Navigation
Hersteller von A-Z
-
(22)
Absaar
-
(1)
AccuAir
-
(3)
AceWell
-
(1)
Active Autowerke
-
(25)
AEZ
-
(6)
aFe Power
-
(73)
AirSuspension Links
-
(246)
Akrapovic
-
(2)
Alti Giri
-
(2)
ANAF
-
(1)
Anygrip
-
(822)
AP
-
(316)
AP Schroefsets
-
(311)
AP Suspension
-
(20)
Arbre Magique
-
(2)
Argo
-
(67)
Armaspeed
-
(12)
Armor All
-
(803)
Armytrix
-
(278)
artFORM
-
(1)
ASD Tuning
-
(237)
Athena
-
(89)
Autoglym
-
(4)
AutoSky
-
(7182)
AutoStyle
-
(29)
Avant-Garde
-
(2193)
Avisa
-
(187)
Bagyard-Airride
-
(2)
Bar's
-
(11)
Bari
-
(4)
Bastuck
-
(1)
Batavia
-
(277)
BBS
-
(15)
BE by Breyton
-
(24)
BE Wheels
-
(7)
Belgom
-
(2)
Belmic
-
(361)
BEYERN
-
(48)
Bigboi
-
(1087)
Bilstein
-
(6)
Bilstein B10
-
(5330)
Bilstein B12
-
(2157)
Bilstein B14
-
(2865)
Bilstein B16
-
(5)
Bilstein B16CS
-
(14)
Bilstein B16DT
-
(4)
Bilstein B16DT2
-
(35)
Bilstein B2
-
(1278)
Bilstein B3
-
(18898)
Bilstein B4
-
(13582)
Bilstein B6
-
(15)
Bilstein B6DM
-
(118)
Bilstein B6DT
-
(9627)
Bilstein B8
-
(26)
Bilstein B8DT
-
(36)
Bilstein EVO
-
(9)
Bilstein EVO R
-
(15)
Bilstein EVO S
-
(7)
Bilstein EVO SE
-
(5)
Bilstein EVO T1
-
(3)
Bilstein EVO T2
-
(511)
Bilstein Overig
-
(3)
Black & Decker
-
(72)
Blanco
-
(21)
Blaupunkt
-
(2)
Bleko
-
(15)
BMW Original Parts
-
(483)
Bonrath
-
(683)
BORBET
-
(70)
Bosch
-
(2453)
Brembo
-
(226)
Breyton
-
(100)
Bridgestone
-
(1710)
Brock
-
(12)
Brunox
-
(168)
Cades
-
(372)
Calibre Wheels
-
(24)
California Scents
-
(185)
Car Bags
-
(1430)
Car Shades
-
(9)
Caractere
-
(1)
CarCept
-
(16)
CarFantasy
-
(4)
Carkids
-
(1223)
Carmani
-
(59)
Carnamics
-
(1685)
Carpoint
-
(112)
Castrol
-
(10)
Celly
-
(10)
CFC
-
(184)
CFC Car Film Components
-
(271)
Charge Speed
-
(54)
Chemical Guys
-
(366)
CIKCAR
-
(1)
Clarion
-
(5188)
ClimAir
-
(168)
Cobra
-
(10)
Commandant
-
(948)
Continental
-
(2)
Control Fire
-
(21702)
COR WHEELS
-
(42)
CRAY
-
(60)
Crunch
-
(1)
Cruz
-
(1)
CSF
-
(2934)
CSR
-
(11)
Cult-Society
-
(976)
M-tech
-
(56)
Mabor
-
(5)
MAC
-
(1)
Maggi
-
(12731)
Magnaflow
-
(240)
MANDRUS
-
(1)
Marternator
-
(33)
Martin Cox
-
(3)
Matador
-
(354)
MAX6
-
(1)
Maxlife
-
(1)
maxton
-
(6930)
Maxton Design
-
(132)
Maxton Design Carbon Division
-
(400)
mbDESIGN
-
(158)
McGard
-
(2)
MEC design
-
(1)
Mechanix Wear
-
(171)
Meguiar's
-
(13)
Menabo
-
(1)
Mentos
-
(17)
MER
-
(7)
MHW Styling
-
(284)
Michelin
-
(1)
MILLE MIGLIA
-
(1630)
Milltek
-
(1)
Mlltek
-
(2)
Mobil
-
(84)
MOMO
-
(207)
Motec
-
(74)
Motip
-
(48)
Motor X
-
(168)
Motordrome
-
(19)
MST Performance
-
(36)
Mtech
-
(1)
P3
-
(1)
P3x
-
(1)
PAM
-
(461)
Pantherbra
-
(1)
PantherBra Carbon
-
(9)
Parksafe
-
(1)
Parrot
-
(14)
Pavo
-
(2)
Peruzzo
-
(103)
Philips
-
(4)
PIAA
-
(11)
Pilot
-
(7)
Pilot Xenon
-
(14)
Pingi
-
(72)
Pioneer
-
(5184)
Pipercross
-
(64)
Pirelli
-
(4)
Plastico
-
(3526)
PowerFlex
-
(3)
PowerRepair
-
(72)
Pressol
-
(1)
Pro-User
-
(4)
Procar
-
(229)
Protecton
-
(34)
Racimex
-
(1)
Racingline
-
(113)
Racoon
-
(156)
RADI8
-
(2569)
Ragazzon
-
(10)
RAID HP
-
(1)
Rain Buster
-
(2)
Rain Vision
-
(17)
Rain-X
-
(624)
RC Design
-
(936)
RC-Design
-
(189)
RDX
-
(1021)
RDX Racedesign
-
(12)
Recaro
-
(29)
Red Bull Racing
-
(938)
REMUS
-
(15)
Repaparts
-
(1)
ResQMe
-
(1)
Restore
-
(32)
Revotec
-
(3082)
RGM
-
(2)
Rial
-
(1726)
Rieger Tuning
-
(41)
RimRingz
-
(199)
Rockford Fosgate
-
(592)
RotiForm
-
(6)
Rustyco
-
(11)
Rustyco roestverdelger
-
(28)
Sabelt
-
(31)
Samco
-
(799)
Samco Sport
-
(7)
Saunders
-
(16)
SCC
-
(7233)
SCC Spoorverbreders
-
(9009)
Schmidt
-
(241)
Schrick
-
(8)
Schroth Racing
-
(356)
Scorpion Exhaust
-
(192)
Semperit
-
(6)
Shampoos
-
(40)
ShineMate
-
(16)
Sicurit
-
(203)
Sicustar
-
(1)
Sicutruck
-
(15)
Sicutune
-
(499)
SiliconHoses
-
(805)
Simoni Racing
-
(4)
Simoniz
-
(527)
Simons
-
(1)
Slick50
-
(9)
Slime
-
(1)
SmartVan
-
(212)
SONAX
-
(385)
Sonniboy
-
(615)
Sparco
-
(286)
SPAX
-
(10)
SPY
-
(201)
SRS-Tec
-
(11)
SSDN Audio
-
(8)
SSDN Mobile
-
(2782)
ST Suspension
-
(16)
STANCE WHEELS
-
(2)
Stanley
-
(4)
Stoplock
-
(2)
STP
-
(11)
Streetwize
-
(87)
STRO Performance
-
(1)
STRO-Performance
-
(27)
STUTTGART
-
(178)
SunClip
-
(1)
Supersport
-
(9102)
Supersprint
-
(71)
SYRON
LSD vleugeldeuren Ford Focus 10/98- Type: DNW,DAX,DA1,DB1,DBY 5-door Bouwjaar: 10/98- Opmerkingen: a/ d/ g/ j Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren Ford Focus 12/04- Type: DA3 3-door Bouwjaar: 12/04- Opmerkingen: a/ b/ d/ f/ i/ j Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren Ford Focus 12/04- Type: 5-door Bouwjaar: 12/04- Opmerkingen: a/ b/ d/ f/ i/ j Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren Ford Mustang 05- Type: Coupe, Convertible Bouwjaar: 05- Opmerkingen: a/ b/ d/ j Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren Ford Mustang 15- Opmerking: Demontage en/of aanpassingen aan de wielkuiplijsten zijn noodzakelijk. Alleen voor de basis 3 deurs uitvoering. Het verlengen van de kabelboom in de deur is noodzakelijk. Bij het model met airbags in de portieren dienen de ze te worden gecontroleerd na het verlengen van de kabelboom. De gasdrukdempers zijn op basis van het gewicht va n de originele portieren geselecteerd. Bij afwijkende portiergewichten diene n de sterkere of zwakkere gasdrukdempers extra te worden besteld. De meerprijs bedraagt € 72,60 Gasdrukdempers kunnen door temperatuurschommelingen in kracht afnemen of toenemen. Deze afwijkingen vallen niet onder garantie, tenzij kan worden aangetoond dat het om een materiaal of productiefout gaat.
LSD vleugeldeuren Honda Civic 01/06- Type: FK1,2,3 5-door Bouwjaar: 01/06- Opmerkingen: a/ d/ j Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren Honda Civic 02/01- Type: EP1,2,3,4,EM2,EV1 3-door Bouwjaar: 02/01- Opmerkingen: a/ b/ c/ f/ j Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren Honda Civic 03/07- Type: FN1,2,3 3-door Bouwjaar: 03/07- Opmerkingen: a/ d/ j Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren Honda Civic 10/91-11/95 Type: EG4 3-door Bouwjaar: 10/91-11/95 Opmerkingen: a/ b/ d/ f/ j Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren Honda Civic 10/95-01/01 Type: EK1,3,4,9 3-door/Hatchback Bouwjaar: 10/95-01/01 Opmerkingen: a/ b/ d/ f/ j Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren Honda Civic 94/95 Type: EJ1,2 3-door Bouwjaar: 94/95 Opmerkingen: a/ b/ d/ f/ j Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren Honda Civic, CRX 07/92-98 Type: EG2,EH6 3-door Bouwjaar: 07/92-98 Opmerkingen: a/ b/ d/ f/ j Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren Honda Civic, CRX 89-6/92 Type: EC8,9,ED6,7,9,EE8,9 3-door Bouwjaar: 89-6/92 Opmerkingen: a/ b/ d/ f/ j Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren Honda Integra 10/97-10/01 Type: DC2 Bouwjaar: 10/97-10/01 Opmerkingen: a/ b/ d/ f/ j Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren Honda S 2000 06/99- Type: AP 1 Bouwjaar: 06/99- Opmerkingen: a/ d/ j Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren Hummer H2 Type: Bouwjaar: Opmerkingen: a/ d/ j Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren Hyundai Coupé 03/02- Type: GK Bouwjaar: 03/02- Opmerkingen: a/ b/ d/ j Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren Lamborghini Gallardo 03- Type: Coupe Bouwjaar: 03- Opmerkingen: a/ b/ d/ j/ p Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren Mazda MX5 05/90-04/98 Type: NA Bouwjaar: 05/90-04/98 Opmerkingen: a/ b/ d/ j Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren Mazda MX6 05/98- Type: NB, NBD Bouwjaar: 05/98- Opmerkingen: a/ b/ d/ j Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren Mazda MX7 03/05- Type: NC, NC1E Bouwjaar: 03/05- Opmerkingen: a/ b/ d/ j Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren Mazda RX 8 12/03- Type: SE Coupe Bouwjaar: 12/03- Opmerkingen: a/ d/ j Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren Mercedes CL 03/99- Type: 215 Coupe Bouwjaar: 03/99- Opmerkingen: a/ b/ d/ j Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren Mercedes CL 05/06- Type: 216 Coupe Bouwjaar: 05/06- Opmerkingen: a/ b/ d/ j/ p/ Z Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren Mercedes CLK 06/02- Type: 209 Coupe, Convertible Bouwjaar: 06/02- Opmerkingen: a/ b/ c/ j Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren Mercedes CLK 06/97-06/02 Type: 208 Coupe, Convertible Bouwjaar: 06/97-06/02 Opmerkingen: a/ b/ d/ j Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren Mercedes SL 07/01- Type: 230 Bouwjaar: 07/01- Opmerkingen: a/ b/ d/ j Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren Mercedes SL 3/89-10/01 Type: 129 Bouwjaar: 3/89-10/01 Opmerkingen: a/ b/ d/ j Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren Mercedes SLK 06/04- Type: 171 Bouwjaar: 06/04- Opmerkingen: a/ d/ j Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren Mercedes SLK 09/96- Type: 170 Bouwjaar: 09/96- Opmerkingen: a/ d/ i/ j Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren Mini Cooper 06/01- Type: R50, Mini incl. Convertible Bouwjaar: 06/01- Opmerkingen: a/ b/ d/ f/ i/ j/ k Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren Mitsubishi Colt 06/04- Type: CZ3 3-door Bouwjaar: 06/04- Opmerkingen: a/ b/ d/ f/ j Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren Mitsubishi Eclipse 12/95- Type: D30 Coupe, Spyder Bouwjaar: 12/95- Opmerkingen: a/ b/ d/ f/ j Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren Nissan Z350 10/03- Type: Z33 incl. Convertible Bouwjaar: 10/03- Opmerkingen: a/ d/ j Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren Opel Astra F 10/91- Type: F-CC, F-Cabrio 3-door, Convertible Bouwjaar: 10/91- Opmerkingen: a/ b/ f/ i/ j/ k Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.
LSD vleugeldeuren Opel Astra G 05/98- Type: T98, /V, /C, T98/NB Coupe, Conv., Sedan Bouwjaar: 05/98- Opmerkingen: a/ b/ d/ j/ k Opmerkingen:a) dismantling and slight modification of the fender might be necessary.b) only 3-door models.c) the original wire harness can be used by rerouting, therefore a drill hole in the A-pillar might be necessary. For further information please check the installation instructions.d) the wire harness extension is necessary.f) the standard indicator at the fender has to be slightly modified or replaced.g) the original windshield washer reservoir must be replaced by Ford part-no. 2S61.17618-AD and 1142518.i) the original windshield washer reseroir must be modified/made smaller or changed. Please check the chart with accessories.j) vehicles with airbags in the doors - the functionality of the airbag needs to be tested after the wire harness is extended.k) parts of the original hinges need to be cut off. To go back to the original hinges there will be additional parts necessary. Please check chart with accessories.o) the charcoal filter needs to be modified.p) the door edge needs to be modified, welding and paintwork necessaryz) application made for the US market - therefore no TUEV certificate available.