In this category you will find parts that improve the stabilization and road holding of your car. For example, we have strut baces that aim to make the body stiffer and thus prevent torsion in the chassis and bodywork. This allows you to drive through corners more sportively and harder.
Anti roll bars and sway bars also ensure that you can ride through the curves more easily. However, this is because they provide a rolling stiffness of the rear axle or front axle. It ensures that the car is straight and thus more stable through the corners. These are attached to the strut or support arm on both sides by means of drop links. When lowering the car, shorter drop links are needed to adjust the 'camber' of your wheels.
We also have polyurethane rubbers in our Powerflex range. This polyurethane rubber has several advantages over the normal rubbers. Not only the durability of polyurethane is many times greater, but it also provides more stability through greater stiffness (25 to 30 percent).
If you can not find certain items in our webshop, ask one of our employees.
H&R Anti-Roll Bar Fiat 124 Spyder 2016-/Mazda MX5 2015- - FA25mm
H&R Anti-Roll Bar Fiat 124 Spider 2016-/Mazda MX5 2015- - FA25mmMade of high-tensile steel with precise forged ends, powder coating and composite rubber bearing H&R Anti-Roll Bars ensure highest quality and persistence. Most of the H&R Anti-Roll Bars have a muiltihole end to adjust the self-steering behavior (over-/understeering) of the vehicle. Reduces body roll and increases agility with a minimal loss of comfort. Compatible with all OEM and sport suspension systems.Product characteristics:High-tensile steelPrecise forged endsPowder coatingComposite rubber bearingOver-/understeering adjustableLess body rollHigher agilityMinimal loss of comfortMade in GermanyDelivered with TÜV approval or ABE:Fiat 124 Spider Type NF 2016-Mazda MX5 Type ND 2015-
H&R Anti-Roll Bar Ford Fiesta/Fusion/Mazda 2 2002- FA22mm
H&R Anti-Roll Bar Ford Fiesta/Fusion/Mazda 2 2002- FA22mmMade of high-tensile steel with precise forged ends, powder coating and composite rubber bearing H&R Anti-Roll Bars ensure highest quality and persistence. Most of the H&R Anti-Roll Bars have a muiltihole end to adjust the self-steering behavior (over-/understeering) of the vehicle. Reduces body roll and increases agility with a minimal loss of comfort. Compatible with all OEM and sport suspension systems.Product characteristics:High-tensile steelPrecise forged endsPowder coatingComposite rubber bearingOver-/understeering adjustableLess body rollHigher agilityMinimal loss of comfortMade in GermanyDelivered with TÜV approval or ABE:Ford Fiesta Type JH1/JD3 2002- Front axle 22mmFord Fusion Type JU2 2002- Front axle 22mmMazda 2 Type DY 2002- Front axle 22mm
H&R Anti-Roll Bar Ford Focus RS 2016-
H&R Anti-Roll Bar Ford Focus RS 2016-Made of high-tensile steel with precise forged ends, powder coating and composite rubber bearing H&R Anti-Roll Bars ensure highest quality and persistence. Most of the H&R Anti-Roll Bars have a muiltihole end to adjust the self-steering behavior (over-/understeering) of the vehicle. Reduces body roll and increases agility with a minimal loss of comfort. Compatible with all OEM and sport suspension systems.Product characteristics:High-tensile steelPrecise forged endsPowder coatingComposite rubber bearingOver-/understeering adjustableLess body rollHigher agilityMinimal loss of comfortMade in GermanyDelivered with TÜV approval or ABE:Ford Focus RS Type DYB-RS 2016-
H&R Anti-Roll Bar Ford Mustang 2015- - FA34mm
H&R Anti-Roll Bar Ford Mustang 2015- - FA34mmMade of high-tensile steel with precise forged ends, powder coating and composite rubber bearing H&R Anti-Roll Bars ensure highest quality and persistence. Most of the H&R Anti-Roll Bars have a muiltihole end to adjust the self-steering behavior (over-/understeering) of the vehicle. Reduces body roll and increases agility with a minimal loss of comfort. Compatible with all OEM and sport suspension systems.Product characteristics:High-tensile steelPrecise forged endsPowder coatingComposite rubber bearingOver-/understeering adjustableLess body rollHigher agilityMinimal loss of comfortMade in GermanyDelivered with TÜV approval or ABE:Ford Mustang including Convertible/Coupé/Fastback 2.3I Ecoboost and Mustang GT V8 model 2015 2015- Ford Mustang Coupé/Convertible Type LAE, 2.3L EcoBoost + GT V8, model 2019, 2018-
H&R Anti-Roll Bar Hyundai i30N & N Performance (PDE) 2017- FA25mm
H&R Anti-Roll Bar Hyundai i30N & N Performance (PDE) 2017- FA25mmMade of high-tensile steel with precise forged ends, powder coating and composite rubber bearing H&R Anti-Roll Bars ensure highest quality and persistence. Most of the H&R Anti-Roll Bars have a muiltihole end to adjust the self-steering behavior (over-/understeering) of the vehicle. Reduces body roll and increases agility with a minimal loss of comfort. Compatible with all OEM and sport suspension systems.Product characteristics:High-tensile steelPrecise forged endsPowder coatingComposite rubber bearingOver-/understeering adjustableLess body rollHigher agilityMinimal loss of comfortMade in GermanyDelivered with TÜV approval or ABE:Hyundai i30N & N Performance (PDE) 2017- Front axle 25mm
H&R Anti-Roll Bar Mercedes A-Class HB/Sedan W177 2018- - 2/4WD - FA29mm
H&R Anti-Roll Bar Mercedes A-Class HB/Sedan W177 2018- - 2/4WD - FA29mmMade of high-tensile steel with precise forged ends, powder coating and composite rubber bearing H&R Anti-Roll Bars ensure highest quality and persistence. Most of the H&R Anti-Roll Bars have a muiltihole end to adjust the self-steering behavior (over-/understeering) of the vehicle. Reduces body roll and increases agility with a minimal loss of comfort. Compatible with all OEM and sport suspension systems.Product characteristics:High-tensile steelPrecise forged endsPowder coatingComposite rubber bearingOver-/understeering adjustableLess body rollHigher agilityMinimal loss of comfortMade in GermanyDelivered with TÜV approval or ABE:Mercedes A-Class HB/Sedan W177 2018-, 2/4WD, Incl. Comfort/Lowered supspension, Excl. AMG, Hybrid, Electric.
H&R Anti-Roll Bar Mercedes V-Class/Vito 2014- (RWD) & V-Class W447 2017- - 2WD, incl. Marco Polo - FA30mm
H&R Anti-Roll Bar Mercedes V-Class/Vito 2014- (RWD) & V-Class W447 2017- - 2WD, incl. Marco Polo - FA30mmMade of high-tensile steel with precise forged ends, powder coating and composite rubber bearing H&R Anti-Roll Bars ensure highest quality and persistence. Most of the H&R Anti-Roll Bars have a muiltihole end to adjust the self-steering behavior (over-/understeering) of the vehicle. Reduces body roll and increases agility with a minimal loss of comfort. Compatible with all OEM and sport suspension systems. Product characteristics:High-tensile steelPrecise forged endsPowder coatingComposite rubber bearingOver-/understeering adjustableLess body rollHigher agilityMinimal loss of comfortMade in GermanyDelivered with TÜV approval or ABE :Mercedes V-Class/Vito Type W447 2WD (RWD), incl. Marco Polo 2014-Mercedes V-Class Type W447 (639/2 & 639/4) 2WD, incl. Marco Polo 2017-
H&R Anti-Roll Bar Mercedes V-Class/Vito W447 2014- 4WD, incl. Marco Polo - FA32mm
H&R Anti-Roll Bar Mercedes V-Class/Vito W447 2014- 4WD, incl. Marco Polo - FA32mmMade of high-tensile steel with precise forged ends, powder coating and composite rubber bearing H&R Anti-Roll Bars ensure highest quality and persistence. Most of the H&R Anti-Roll Bars have a muiltihole end to adjust the self-steering behavior (over-/understeering) of the vehicle. Reduces body roll and increases agility with a minimal loss of comfort. Compatible with all OEM and sport suspension systems. Product characteristics:High-tensile steelPrecise forged endsPowder coatingComposite rubber bearingOver-/understeering adjustableLess body rollHigher agilityMinimal loss of comfortMade in GermanyDelivered with TÜV approval or ABE :Mercedes V-Class/Vito Type W447 (639/2 & 639/4 & 639/5) 4WD, incl. Marco Polo 2014-Only for cars with original stabilizer part number: A4473230200
H&R Anti-Roll Bar Mercedes V-Class/Vito W447 2014- 4WD, incl. Marco Polo - FA32mm
H&R Anti-Roll Bar Mercedes V-Class/Vito W447 2014- 4WD, incl. Marco Polo - FA32mmMade of high-tensile steel with precise forged ends, powder coating and composite rubber bearing H&R Anti-Roll Bars ensure highest quality and persistence. Most of the H&R Anti-Roll Bars have a muiltihole end to adjust the self-steering behavior (over-/understeering) of the vehicle. Reduces body roll and increases agility with a minimal loss of comfort. Compatible with all OEM and sport suspension systems. Product characteristics:High-tensile steelPrecise forged endsPowder coatingComposite rubber bearingOver-/understeering adjustableLess body rollHigher agilityMinimal loss of comfortMade in GermanyDelivered with TÜV approval or ABE :Mercedes V-Class/Vito Type W447 (639/2 & 639/4 & 639/5) 4WD, incl. Marco Polo 2014-
H&R Anti-Roll Bar Mercedes W170 SLK I 1996- FA30mm
H&R Anti-Roll Bar Mercedes W170 SLK I 1996- FA30mmMade of high-tensile steel with precise forged ends, powder coating and composite rubber bearing H&R Anti-Roll Bars ensure highest quality and persistence. Most of the H&R Anti-Roll Bars have a muiltihole end to adjust the self-steering behavior (over-/understeering) of the vehicle. Reduces body roll and increases agility with a minimal loss of comfort. Compatible with all OEM and sport suspension systems.Product characteristics:High-tensile steelPrecise forged endsPowder coatingComposite rubber bearingOver-/understeering adjustableLess body rollHigher agilityMinimal loss of comfortMade in GermanyDelivered with TÜV approval or ABE:Mercedes-Benz W170 SLK I Type 170 up to 260kW (only for cars with original rear axle stabilizer) 1996- Front axle 30mm
H&R Anti-Roll Bar Mini F56 2014-
H&R Anti-Roll Bar Mini F56 2014-Made of high-tensile steel with precise forged ends, powder coating and composite rubber bearing H&R Anti-Roll Bars ensure highest quality and persistence. Most of the H&R Anti-Roll Bars have a muiltihole end to adjust the self-steering behavior (over-/understeering) of the vehicle. Reduces body roll and increases agility with a minimal loss of comfort. Compatible with all OEM and sport suspension systems.Product characteristics:High-tensile steelPrecise forged endsPowder coatingComposite rubber bearingOver-/understeering adjustableLess body rollHigher agilityMinimal loss of comfortMade in GermanyDelivered with TÜV approval or ABE:Mini F56 Type UKL-L 2014-
H&R Anti-Roll Bar Opel Astra G Coupé/Convertible/Astra H Sedan/Sportstourer 1998- FA24mm
H&R Anti-Roll Bar Opel Astra G Coupé/Convertible/Astra H Sedan/Sportstourer 1998- FA24mmMade of high-tensile steel with precise forged ends, powder coating and composite rubber bearing H&R Anti-Roll Bars ensure highest quality and persistence. Most of the H&R Anti-Roll Bars have a muiltihole end to adjust the self-steering behavior (over-/understeering) of the vehicle. Reduces body roll and increases agility with a minimal loss of comfort. Compatible with all OEM and sport suspension systems.Product characteristics:High-tensile steelPrecise forged endsPowder coatingComposite rubber bearingOver-/understeering adjustableLess body rollHigher agilityMinimal loss of comfortMade in GermanyDelivered with TÜV approval or ABE:Opel Astra G Type T98C, Coupé/Convertible, not for Sedan/Sportstourer 1998- Front axle 24mmOpel Astra H Sedan/Sportstourer Type A-H + A-H/SW 2004- Front axle 24mm
H&R Anti-Roll Bar Opel Corsa C GSI 2000-/Tigra Twin Top 2004- - 23mm
H&R Anti-Roll Bar Opel Corsa C GSI 2000-/Tigra Twin Top 2004- - 23mmMade of high-tensile steel with precise forged ends, powder coating and composite rubber bearing H&R Anti-Roll Bars ensure highest quality and persistence. Most of the H&R Anti-Roll Bars have a muiltihole end to adjust the self-steering behavior (over-/understeering) of the vehicle. Reduces body roll and increases agility with a minimal loss of comfort. Compatible with all OEM and sport suspension systems.Product characteristics:High-tensile steelPrecise forged endsPowder coatingComposite rubber bearingOver-/understeering adjustableLess body rollHigher agilityMinimal loss of comfortMade in GermanyDelivered with TÜV approval or ABE:Opel Corsa C GSI Type Corsa C 2000-Opel Tigra Twin Top Type X-C/Roadster 2004-
H&R Anti-Roll Bar Peugeot 206 1998- - FA23mm - with middle crank
H&R Anti-Roll Bar Peugeot 206 1998- - FA23mm - with middle crankMade of high-tensile steel with precise forged ends, powder coating and composite rubber bearing H&R Anti-Roll Bars ensure highest quality and persistence. Most of the H&R Anti-Roll Bars have a muiltihole end to adjust the self-steering behavior (over-/understeering) of the vehicle. Reduces body roll and increases agility with a minimal loss of comfort. Compatible with all OEM and sport suspension systems.Product characteristics:High-tensile steelPrecise forged endsPowder coatingComposite rubber bearingOver-/understeering adjustableLess body rollHigher agilityMinimal loss of comfortMade in GermanyDelivered with TÜV approval or ABE:Peugeot 206 Type 2NFZ/28HX/28HZ/2HFZ/2HFX/2KFX/2KFW/2NFU/2KFU/2-9HZ/2-9HY with middle-crank 1998-
H&R Anti-Roll Bar Peugeot 206/RC 1998- - FA23mm - without middle crank
H&R Anti-Roll Bar Peugeot 206/RC 1998- - FA23mm - without middle crankMade of high-tensile steel with precise forged ends, powder coating and composite rubber bearing H&R Anti-Roll Bars ensure highest quality and persistence. Most of the H&R Anti-Roll Bars have a muiltihole end to adjust the self-steering behavior (over-/understeering) of the vehicle. Reduces body roll and increases agility with a minimal loss of comfort. Compatible with all OEM and sport suspension systems.Product characteristics:High-tensile steelPrecise forged endsPowder coatingComposite rubber bearingOver-/understeering adjustableLess body rollHigher agilityMinimal loss of comfortMade in GermanyDelivered with TÜV approval or ABE:Peugeot 206+RC Type 2RHY/2WJZ/2WJY/2RFR/2RFN/2RFK without middle-crank 1998-
H&R Anti-Roll Bar Peugeot 307 2001-/308 2007- FA25mm
H&R Anti-Roll Bar Peugeot 307 2001-/308 2007- FA25mmMade of high-tensile steel with precise forged ends, powder coating and composite rubber bearing H&R Anti-Roll Bars ensure highest quality and persistence. Most of the H&R Anti-Roll Bars have a muiltihole end to adjust the self-steering behavior (over-/understeering) of the vehicle. Reduces body roll and increases agility with a minimal loss of comfort. Compatible with all OEM and sport suspension systems.Product characteristics:High-tensile steelPrecise forged endsPowder coatingComposite rubber bearingOver-/understeering adjustableLess body rollHigher agilityMinimal loss of comfortMade in GermanyDelivered with TÜV approval or ABE:Peugeot 307 Sedan/SW/Cabrio Type 3 KFW/3 NFU/3 RFN/3 RHY/3 8HZ/3 9HV/3 9HX/3 9 HY/3 9HZ/3 RFJ/3 RHS/3 RHR/3 KFU/3 RFK without TUV approval 2001-Peugeot 308 Sedan/Cabrio without TUV approval 2007-
H&R Anti-Roll Bar Seat Arosa 1997-/Ibiza/Cordoba 1993-/Volkswagen Lupo 1998-/Polo 1994- FA21mm
H&R Anti-Roll Bar Seat Arosa 1997-/Ibiza/Cordoba 1993-/Volkswagen Lupo 1998-/Polo 1994- FA21mmMade of high-tensile steel with precise forged ends, powder coating and composite rubber bearing H&R Anti-Roll Bars ensure highest quality and persistence. Most of the H&R Anti-Roll Bars have a muiltihole end to adjust the self-steering behavior (over-/understeering) of the vehicle. Reduces body roll and increases agility with a minimal loss of comfort. Compatible with all OEM and sport suspension systems.Product characteristics:High-tensile steelPrecise forged endsPowder coatingComposite rubber bearingOver-/understeering adjustableLess body rollHigher agilityMinimal loss of comfortMade in GermanyDelivered with TÜV approval or ABE:Seat Arosa Type 6H/6HS 1997-Seat Ibiza/Cordoba including Vario Type 6K, exclusive Cupra/Cordoba 6K/C 1993-Volkswagen Lupo including GTI Type 6X/6ES, exclusive FSI/3L Lupo, including Classic/Variant 1998-Volkswagen Polo Type 6N/6KV, including Classic/Variant 1994-Front axle 21mm.
H&R Anti-Roll Bar Seat Ibiza/Cordoba 2WD 2002-/Skoda Fabia 2000-/Volkswagen Fox/Polo 2001- FA22mm
H&R Anti-Roll Bar Seat Ibiza/Cordoba 2WD 2002-/Skoda Fabia 2000-/Volkswagen Fox/Polo 2001- FA22mmMade of high-tensile steel with precise forged ends, powder coating and composite rubber bearing H&R Anti-Roll Bars ensure highest quality and persistence. Most of the H&R Anti-Roll Bars have a muiltihole end to adjust the self-steering behavior (over-/understeering) of the vehicle. Reduces body roll and increases agility with a minimal loss of comfort. Compatible with all OEM and sport suspension systems.Product characteristics:High-tensile steelPrecise forged endsPowder coatingComposite rubber bearingOver-/understeering adjustableLess body rollHigher agilityMinimal loss of comfortMade in GermanyDelivered with TÜV approval or ABE:Seat Ibiza/Cordoba including Cupra/FR Type 6L/1P, 2WD 2002-Skoda Fabia including Combi/RS Type 6Y 2000-Skoda Fabia including Combi/RS Type 5J 2007-Volkswagen Fox Type 5Z 2001-Volkswagen Polo including GTI Type 9N 2001-Front axle 22mm.Set including 2 anti-roll bars for coil over HR 293251.
H&R Anti-Roll Bar Skoda Superb/ Volkswagen Passat/Touran/Tiguan 2014- & Skoda Kodiaq 2017- & Cupra Formentor incl. VZ (KM) 2020- 2WD - FA27mm
H&R Anti-Roll Bar Skoda Superb/ Volkswagen Passat/Touran/Tiguan 2014- & Skoda Kodiaq 2017- & Cupra Formentor incl. VZ (KM) 2020-& Cupra Formentor incl. VZ (KM) 2020- 2WD - FA27mmMade of high-tensile steel with precise forged ends, powder coating and composite rubber bearing H&R Anti-Roll Bars ensure highest quality and persistence. Most of the H&R Anti-Roll Bars have a muiltihole end to adjust the self-steering behavior (over-/understeering) of the vehicle. Reduces body roll and increases agility with a minimal loss of comfort. Compatible with all OEM and sport suspension systems. Product characteristics:High-tensile steelPrecise forged endsPowder coatingComposite rubber bearingOver-/understeering adjustableLess body rollHigher agilityMinimal loss of comfortMade in GermanyDelivered with TÜV approval or ABE :Skoda Superb Sedan Type 3T/3V 2WD 2015- Front axle 27mmSkoda Superb Combi Type 3T/3V 2WD 2015- Front axle 27mmVolkswagen Passat Sedan Type 3C 2WD 2014- Front axle 27mmVolkswagen Passat Variant Type 3C 2WD 2014- Front axle 27mmVolkswagen Touran Type 1T 2WD 2015- Front axle 27mmVolkswagen Tiguan Type 5N 2WD 2016- Front axle 27mmCupra Formentor Type KM 2WD, incl. VZ, 2020- Front axle 27mmSkoda Kodiaq Type NS 2WD, 2017- Front axle 27mm
H&R Anti-Roll Bar Subaru BRZ (ZD8) & Toyota GR 86 (ZN8) 2021- - FA22mm
H&R Anti-Roll Bar Subaru BRZ (ZD8) & Toyota GR 86 (ZN8) 2021- - FA22mmMade of high-tensile steel with precise forged ends, powder coating and composite rubber bearing H&R Anti-Roll Bars ensure highest quality and persistence. Most of the H&R Anti-Roll Bars have a muiltihole end to adjust the self-steering behavior (over-/understeering) of the vehicle. Reduces body roll and increases agility with a minimal loss of comfort. Compatible with all OEM and sport suspension systems. Product characteristics:High-tensile steelPrecise forged endsPowder coatingComposite rubber bearingOver-/understeering adjustableLess body rollHigher agilityMinimal loss of comfortMade in GermanyDelivered with TÜV approval or ABE :Subaru BRZ type ZD8, 2.4L, 2021-, Front axle 22mmToyota GR 86 type ZN8, 2.4L, 2021-, Front axle 22mm
H&R Anti-Roll Bar Volkswagen Polo VI (AW) 2017- / T-Cross (C1) 2018- / Taigo (CS) 2021- & Seat Ibiza (KJ) / Arona (KJ) 2017- & Skoda Kamiq (NW) 2019- / Fabia IV (PJ) 2021- - 24mm
H&R Anti-Roll Bar Volkswagen Polo VI (AW) 2017- / T-Cross (C1) 2018- / Taigo (CS) 2021- & Seat Ibiza (KJ) / Arona (KJ) 2017- & Skoda Kamiq (NW) 2019- / Fabia IV (PJ) 2021- - 24mmMade of high-tensile steel with precise forged ends, powder coating and composite rubber bearing H&R Anti-Roll Bars ensure highest quality and persistence. Most of the H&R Anti-Roll Bars have a muiltihole end to adjust the self-steering behavior (over-/understeering) of the vehicle. Reduces body roll and increases agility with a minimal loss of comfort. Compatible with all OEM and sport suspension systems. Product characteristics:High-tensile steelPrecise forged endsPowder coatingComposite rubber bearingOver-/understeering adjustableLess body rollHigher agilityMinimal loss of comfortMade in GermanyDelivered with TÜV approval or ABE :Volkswagen Polo VI (AW), Incl. GTI, 2017-Volkswagen T-Cross (C1), 2018-Volkswagen Taigo (CS), 2021-Seat Ibiza (KJ), 2017-Seat Arona (KJ), 2017-Skoda Kamiq (NW), 2019-Skoda Fabia IV (PJ), 2021-
H&R Set of Anti-Roll Bars Audi A1 2WD/Seat Ibiza FR 2WD/Volkswagen Polo 2008- FA22/RA25mm
H&R Set of Anti-Roll Bars Audi A1 2WD/Seat Ibiza FR 2WD/Volkswagen Polo 2008- FA22/RA25mmMade of high-tensile steel with precise forged ends, powder coating and composite rubber bearing H&R Anti-Roll Bars ensure highest quality and persistence. Most of the H&R Anti-Roll Bars have a muiltihole end to adjust the self-steering behavior (over-/understeering) of the vehicle. Reduces body roll and increases agility with a minimal loss of comfort. Compatible with all OEM and sport suspension systems.Product characteristics:High-tensile steelPrecise forged endsPowder coatingComposite rubber bearingOver-/understeering adjustableLess body rollHigher agilityMinimal loss of comfortMade in GermanyDelivered with TÜV approval or ABE:Audi A1 including Sportback Type 8X, 2WD 2010- Front axle 22mm/Rear axle 25mmSeat Ibiza FR Type 6J, 2WD 2008- Front axle 22mm/Rear axle 25mmVolkswagen Polo Type 6R, exclusive GTI/WRC 2010- Front axle 22mm/Rear axle 25mm
H&R Set of Anti-Roll Bars Audi A2 Type 8Z - excl 1.2TDI - 2000- - 22/25mm
H&R Set of Anti-Roll Bars Audi A2 Type 8Z - excl 1.2TDI - 2000- - 22/25mmMade of high-tensile steel with precise forged ends, powder coating and composite rubber bearing H&R Anti-Roll Bars ensure highest quality and persistence. Most of the H&R Anti-Roll Bars have a muiltihole end to adjust the self-steering behavior (over-/understeering) of the vehicle. Reduces body roll and increases agility with a minimal loss of comfort. Compatible with all OEM and sport suspension systems.Product characteristics:High-tensile steelPrecise forged endsPowder coatingComposite rubber bearingOver-/understeering adjustableLess body rollHigher agilityMinimal loss of comfortMade in GermanyDelivered with TÜV approval or ABE:Audi A2 Type 8Z, not for 1.2 TDI, 2000-
H&R Set of Anti-Roll Bars Audi A3 (GY) Sedan/Sportback & Volkswagen Golf VIII (CD) & Seat Leon (KL) HB/Sportstourer & Skoda Octavia (NX) Sedan/Combi 2020- - 26/24mm
H&R Set of Anti-Roll Bars Audi A3 (GY) Sedan/Sportback & Volkswagen Golf VIII (CD) & Seat Leon (KL) HB/Sportstourer & Skoda Octavia (NX) Sedan/Combi 2020- - 26/24mmMade of high-tensile steel with precise forged ends, powder coating and composite rubber bearing H&R Anti-Roll Bars ensure highest quality and persistence. Most of the H&R Anti-Roll Bars have a muiltihole end to adjust the self-steering behavior (over-/understeering) of the vehicle. Reduces body roll and increases agility with a minimal loss of comfort. Compatible with all OEM and sport suspension systems. Product characteristics:High-tensile steelPrecise forged endsPowder coatingComposite rubber bearingOver-/understeering adjustableLess body rollHigher agilityMinimal loss of comfortMade in GermanyDelivered with TÜV approval or ABE :Audi A3 (GY), Sedan/Sportback, Only for multilink rear axle, 2WD, 2020-Volkswagen Golf VIII (CD), Only for multilink rear axle, incl. GTD, GTE, GTI, GTI Clubsport, e-Hybrid, 2WD, 2020-Seat Leon Hachback/Sportstourer (KL), Only for multilink rear axle, incl. Cupra/Cupra VZ, excl e-Hybrid, 2WD, 2020-Skoda Octavia Sedan/Combi (NX), Only for multilink rear axle, incl. Octavia RS, excl e-Hybrid, 2WD, 2020-
H&R Set of Anti-Roll Bars Audi A3 (GY) Sedan/Sportback & Volkswagen Golf VIII (CD) & Seat Leon (KL) HB/Sportstourer & Skoda Octavia (NX) Sedan/Combi 2020- - 28/26mm
H&R Set of Anti-Roll Bars Audi A3 (GY) Sedan/Sportback & Volkswagen Golf VIII (CD) & Seat Leon (KL) HB/Sportstourer & Skoda Octavia (NX) Sedan/Combi 2020- - 28/26mmMade of high-tensile steel with precise forged ends, powder coating and composite rubber bearing H&R Anti-Roll Bars ensure highest quality and persistence. Most of the H&R Anti-Roll Bars have a muiltihole end to adjust the self-steering behavior (over-/understeering) of the vehicle. Reduces body roll and increases agility with a minimal loss of comfort. Compatible with all OEM and sport suspension systems. Product characteristics:High-tensile steelPrecise forged endsPowder coatingComposite rubber bearingOver-/understeering adjustableLess body rollHigher agilityMinimal loss of comfortMade in GermanyDelivered with TÜV approval or ABE :Audi A3 (GY), Sedan/Sportback, Only for multilink rear axle, 2WD, 2020-Volkswagen Golf VIII (CD), Only for multilink rear axle, incl. GTD, GTE, GTI, GTI Clubsport, e-Hybrid, 2WD, 2020-Seat Leon Hachback/Sportstourer (KL), Only for multilink rear axle, incl. Cupra/Cupra VZ, excl. e-Hybrid, 2WD, 2020-Skoda Octavia Sedan/Combi (NX), Only for multilink rear axle, incl. Octavia RS, excl. e-Hybrid, 2WD, 2020-
H&R Set of Anti-Roll Bars Audi A3 (GY) Sedan/Sportback & Volkswagen Golf VIII (CD) Hatchback/Variant & Seat Leon (KL) Hatchback/Sportstourer & Skoda Octavia (NX) Sedan/Combi 2020- 4WD - 27/25mm (Multilink)
H&R Set of Anti-Roll Bars Audi A3 (GY) Sedan/Sportback & Volkswagen Golf VIII (CD) Hatchback/Variant & Seat Leon (KL) Hatchback/Sportstourer & Skoda Octavia (NX) Sedan/Combi 2020- - 28/26mm (Multilink)Made of high-tensile steel with precise forged ends, powder coating and composite rubber bearing H&R Anti-Roll Bars ensure highest quality and persistence. Most of the H&R Anti-Roll Bars have a muiltihole end to adjust the self-steering behavior (over-/understeering) of the vehicle. Reduces body roll and increases agility with a minimal loss of comfort. Compatible with all OEM and sport suspension systems. Product characteristics:High-tensile steelPrecise forged endsPowder coatingComposite rubber bearingOver-/understeering adjustableLess body rollHigher agilityMinimal loss of comfortMade in GermanyDelivered with TÜV approval or ABE :Audi A3 (GY), Sedan/Sportback, Only for multilink rear axle, 4WD, 2020-Volkswagen Golf VIII (CD) Hatchback/Variant, Only for multilink rear axle, incl. Golf R, 4WD, 2020-Seat Leon Hachback/Sportstourer (KL), Only for multilink rear axle, incl. Cupra/Cupra VZ, excl. e-Hybrid, 4WD, 2020-Skoda Octavia Sedan/Combi (NX), Only for multilink rear axle, incl. Octavia RS, excl. e-Hybrid, 4WD, 2020-
H&R Set of Anti-Roll Bars Audi A3/S3/TT Quattro/Seat Leon/Volkswagen Bora/Golf IV 4WD 1999- FA25/RA21mm
H&R Set of Anti-Roll Bars Audi A3/S3/TT Quattro/Seat Leon/Volkswagen Bora/Golf IV 4WD 1999- FA25/RA21mmMade of high-tensile steel with precise forged ends, powder coating and composite rubber bearing H&R Anti-Roll Bars ensure highest quality and persistence. Most of the H&R Anti-Roll Bars have a muiltihole end to adjust the self-steering behavior (over-/understeering) of the vehicle. Reduces body roll and increases agility with a minimal loss of comfort. Compatible with all OEM and sport suspension systems.Product characteristics:High-tensile steelPrecise forged endsPowder coatingComposite rubber bearingOver-/understeering adjustableLess body rollHigher agilityMinimal loss of comfortMade in GermanyDelivered with TÜV approval or ABE:Audi A3 Quattro Type 8L, 4WD 1999-Audi S3 Quattro Type 8L, 4WD 1999-Audi TT Coupé/Convertible Quattro Type 8N, 4WD 1999-Seat Leon Type 1M, 4WD 2000-Volkswagen Bora 4-Motion Type 1J, 4WD 1999-Volkswagen Golf IV 4-Motion including R32 Type 1J, 4WD 1999-Front axle 25mm/Rear axle 21mm.(Stabilizer-holder at the shock-absorber)
H&R Set of Anti-Roll Bars Audi A3/Seat Leon/Toledo/Skoda Octavia/Volkswagen Golf IV /Bora/Beetle 2WD 1996- FA28/RA24mm
H&R Set of Anti-Roll Bars Audi A3/Seat Leon/Toledo/Skoda Octavia/Volkswagen Golf IV /Bora/Beetle 2WD 1996- FA28/RA24mmMade of high-tensile steel with precise forged ends, powder coating and composite rubber bearing H&R Anti-Roll Bars ensure highest quality and persistence. Most of the H&R Anti-Roll Bars have a muiltihole end to adjust the self-steering behavior (over-/understeering) of the vehicle. Reduces body roll and increases agility with a minimal loss of comfort. Compatible with all OEM and sport suspension systems.Product characteristics:High-tensile steelPrecise forged endsPowder coatingComposite rubber bearingOver-/understeering adjustableLess body rollHigher agilityMinimal loss of comfortMade in GermanyDelivered with TÜV approval or ABE:Audi A3 Type 8L, 2WD 1996-Seat Leon Type 1M, 2WD, exclusive Cupra R 1999-Seat Toledo Type 1M, 2WD, exclusive Cupra R 1999-Skoda Octavia Sedan/SW Type 1U, 2WD, exclusive RS Models 1997-Volkswagen Beetle Type 9C/1Y/1C, 2WD 1997-Volkswagen Bora Sedan/SW Type 1J, 2WD 1997-Volkswagen Golf IV Sedan/SW Type 1J, 2WD 1997-Front axle 26mm/Rear axle 22mm.
H&R Set of Anti-Roll Bars Audi A3/Sportback/Q2 & Seat Leon/Leon ST & Skoda Octavia 2013- & Volkswagen Golf VII/T-Roc - 2WD - 28/28mm
H&R Set of Anti-Roll Bars Audi A3/Sportback/Q2 & Seat Leon/Leon ST & Skoda Octavia 2013- & Volkswagen Golf VII/T-Roc - 2WD - 28/28mmMade of high-tensile steel with precise forged ends, powder coating and composite rubber bearing H&R Anti-Roll Bars ensure highest quality and persistence. Most of the H&R Anti-Roll Bars have a muiltihole end to adjust the self-steering behavior (over-/understeering) of the vehicle. Reduces body roll and increases agility with a minimal loss of comfort. Compatible with all OEM and sport suspension systems.Product characteristics:High-tensile steelPrecise forged endsPowder coatingComposite rubber bearingOver-/understeering adjustableLess body rollHigher agilityMinimal loss of comfortMade in GermanyDelivered with TÜV approval or ABE:Audi A3/A3 Sportback Type 8V 2013-Audi Q2 Type GA 2016- Seat Leon (including SC/FR) Type 5F 2013-Seat Leon ST Type 5F 2012-Seat Leon ST Type 5F, including Facelift 2017 2015- Skoda Octavia Sedan/Combi (including RS) Type 5E 2013-Volkswagen Golf VII Sedan/Variant/Sportsvan Type AU/AUV 2012-Volkswagen T-Roc Type A1 2017-Only for cars with twist beam rear axle!
H&R Set of Anti-Roll Bars Audi A3/Sportback/Q2 & Seat Leon/ST & Skoda Octavia 2013- & Volkswagen Golf VII/T-Roc - 2WD - 26/25mm
H&R Set of Anti-Roll Bars Audi A3/Sportback/Q2 & Seat Leon/ST & Skoda Octavia 2013- & Volkswagen Golf VII/T-Roc - 2WD - 26/25mmMade of high-tensile steel with precise forged ends, powder coating and composite rubber bearing H&R Anti-Roll Bars ensure highest quality and persistence. Most of the H&R Anti-Roll Bars have a muiltihole end to adjust the self-steering behavior (over-/understeering) of the vehicle. Reduces body roll and increases agility with a minimal loss of comfort. Compatible with all OEM and sport suspension systems.Product characteristics:High-tensile steelPrecise forged endsPowder coatingComposite rubber bearingOver-/understeering adjustableLess body rollHigher agilityMinimal loss of comfortMade in GermanyDelivered with TÜV approval or ABE:Audi A3/A3 Sportback Type 8V 2013-Audi Q2 Type GA 2016-Seat Leon (including SC/FR) Type 5F 2013-Seat Leon ST Type 5F 2012-Seat Leon ST Type 5F including Facelift 2017, 2015-Skoda Octavia Sedan/Combi (including RS) Type 5E 2013-Volkswagen Golf VII Sedan/Variant/Sportsvan Type AU/AUV 2012-Volkswagen T-Roc Type A1 2017-Only for cars with twist beam rear axle!
H&R Set of Anti-Roll Bars Audi A3/TT Coupé / Seat Leon 5F / Skoda Octavia / Volkswagen Golf VII 2012- 2WD - FA26/RA24mm
H&R Set of Anti-Roll Bars Audi A3/TT Coupé / Seat Leon 5F / Skoda Octavia / Volkswagen Golf VII 2012- 2WD - FA26/RA24mmMade of high-tensile steel with precise forged ends, powder coating and composite rubber bearing H&R Anti-Roll Bars ensure highest quality and persistence. Most of the H&R Anti-Roll Bars have a muiltihole end to adjust the self-steering behavior (over-/understeering) of the vehicle. Reduces body roll and increases agility with a minimal loss of comfort. Compatible with all OEM and sport suspension systems.Product characteristics:High-tensile steelPrecise forged endsPowder coatingComposite rubber bearingOver-/understeering adjustableLess body rollHigher agilityMinimal loss of comfortMade in GermanyDelivered with TÜV approval or ABE:Audi A3/A3 Sportback/Sedan/Cabrio Type 8V 2WD 2012-Audi TT Coupé Type 8J/8S 2WD 2014-Seat Leon including SC/FR/ST/Cupra Type 5F 2WD including Cupra 265/-280/-290 2013-Skoda Octavia Sedan/Combi/RS Type 5E 2WD 2013-Volkswagen Golf VII Sedan/Sportsvan/Variant/GTI/GTI Performance/GTI Clubsport Type AU/AUV 2WD 2012-Volkswagen Golf VII Variant Type AU 2WD 2012-Volkswagen Golf VII GTI TCR Type AU 2019 Front axle 26mm / Rear axle 24mmOnly for cars with multilink rear axle!
H&R Set of Anti-Roll Bars Audi A3/TT Coupé / Seat Leon 5F / Skoda Octavia / Volkswagen Golf VII 2012- 2WD - FA28/RA26mm
H&R Set of Anti-Roll Bars Audi A3/TT Coupé / Seat Leon 5F / Skoda Octavia / Volkswagen Golf VII 2012- 2WD - FA28/RA26mmMade of high-tensile steel with precise forged ends, powder coating and composite rubber bearing H&R Anti-Roll Bars ensure highest quality and persistence. Most of the H&R Anti-Roll Bars have a muiltihole end to adjust the self-steering behavior (over-/understeering) of the vehicle. Reduces body roll and increases agility with a minimal loss of comfort. Compatible with all OEM and sport suspension systems.Product characteristics:High-tensile steelPrecise forged endsPowder coatingComposite rubber bearingOver-/understeering adjustableLess body rollHigher agilityMinimal loss of comfortMade in GermanyDelivered with TÜV approval or ABE:Audi A3/A3 Sportback/Sedan/Cabrio Type 8V 2WD 2012-Audi TT Coupé Type 8J/8S 2WD 2014-Seat Leon including SC/FR/ST/Cupra Type 5F 2WD including Cupra 265/-280/-290 2013-Skoda Octavia Sedan/Combi/RS Type 5E 2WD 2013-Volkswagen Golf VII Sedan/Sportsvan/Variant/GTI/GTI Performance/GTI Clubsport Type AU/AUV 2WD 2012-Volkswagen Golf VII Variant Type AU 2WD 2012-Volkswagen Golf VII GTI TCR Type AU 2019 Front axle 28mm / Rear axle 26mmOnly for cars with multilink rear axle
H&R Set of Anti-Roll Bars Audi A4 Sedan/Avant/Convertible 2/4WD 2000- FA32/RA20mm
H&R Set of Anti-Roll Bars Audi A4 Sedan/Avant/Convertible 2/4WD 2000- FA32/RA20mmMade of high-tensile steel with precise forged ends, powder coating and composite rubber bearing H&R Anti-Roll Bars ensure highest quality and persistence. Most of the H&R Anti-Roll Bars have a muiltihole end to adjust the self-steering behavior (over-/understeering) of the vehicle. Reduces body roll and increases agility with a minimal loss of comfort. Compatible with all OEM and sport suspension systems.Product characteristics:High-tensile steelPrecise forged endsPowder coatingComposite rubber bearingOver-/understeering adjustableLess body rollHigher agilityMinimal loss of comfortMade in GermanyDelivered with TÜV approval or ABE:Audi A4 Sedan/Avant including Quattro Type 8E (B6/B7), including Facelift model 2005, 2/4WD 2000- Front axle 32mm/Rear axle 20mmAudi A4 Convertible including Quattro Type 8H (B6/B7), 2/4WD 2002- Front axle 32mm/Rear axle 20mm
H&R Set of Anti-Roll Bars Audi A4/S4/RS4 1998- FA32/RA17mm
H&R Set of Anti-Roll Bars Audi A4/S4/RS4 1998- FA32/RA17mmMade of high-tensile steel with precise forged ends, powder coating and composite rubber bearing H&R Anti-Roll Bars ensure highest quality and persistence. Most of the H&R Anti-Roll Bars have a muiltihole end to adjust the self-steering behavior (over-/understeering) of the vehicle. Reduces body roll and increases agility with a minimal loss of comfort. Compatible with all OEM and sport suspension systems.Product characteristics:High-tensile steelPrecise forged endsPowder coatingComposite rubber bearingOver-/understeering adjustableLess body rollHigher agilityMinimal loss of comfortMade in GermanyDelivered with TÜV approval or ABE:Audi A4 Sedan/Avant Quattro Type B5, 4WD 1998-Audi RS4 Avant Type B5, 4WD 2000-Audi S4 Sedan/Avant Type B5, 4WD 1998-Front axle 32mm/Rear axle 17mm.
H&R Set of Anti-Roll Bars Audi A4/S4/RS4 1998- FA32/RA21mm
H&R Set of Anti-Roll Bars Audi A4/S4/RS4 1998- FA32/RA21mmMade of high-tensile steel with precise forged ends, powder coating and composite rubber bearing H&R Anti-Roll Bars ensure highest quality and persistence. Most of the H&R Anti-Roll Bars have a muiltihole end to adjust the self-steering behavior (over-/understeering) of the vehicle. Reduces body roll and increases agility with a minimal loss of comfort. Compatible with all OEM and sport suspension systems.Product characteristics:High-tensile steelPrecise forged endsPowder coatingComposite rubber bearingOver-/understeering adjustableLess body rollHigher agilityMinimal loss of comfortMade in GermanyDelivered with TÜV approval or ABE:Audi A4 Sedan/Avant Quattro Type B5, 4WD Sport Version 1998-Audi RS4 Avant Type B5, 4WD 2000-Audi S4 Sedan/Avant Type B5, 4WD 1998-Front axle 32mm/Rear axle 21mm.
H&R Set of Anti-Roll Bars Audi A4/S4/RS4/A5/S5/RS5 2007- FA32/RA22mm
H&R Set of Anti-Roll Bars Audi A4/S4/RS4/A5/S5/RS5 2007- FA32/RA22mmMade of high-tensile steel with precise forged ends, powder coating and composite rubber bearing H&R Anti-Roll Bars ensure highest quality and persistence. Most of the H&R Anti-Roll Bars have a muiltihole end to adjust the self-steering behavior (over-/understeering) of the vehicle. Reduces body roll and increases agility with a minimal loss of comfort. Compatible with all OEM and sport suspension systems.Product characteristics:High-tensile steelPrecise forged endsPowder coatingComposite rubber bearingOver-/understeering adjustableLess body rollHigher agilityMinimal loss of comfortMade in GermanyDelivered with TÜV approval or ABE:Audi A4 Sedan/Avant Type B8 (8K), 2/4WD 2007-Audi A5 Sedan/Convertible/Sportback Type B8 (8K) 2/4WD (A5/S5 last 5 digits of the chassis number 11201) 2007-Audi RS4 Avant Type B8 (8K) 4WD 2012-Audi RS5 Coupé/Convertible Type B8 (8K) 4WD 2010-Audi S4 Sedan/Avant Type B8 (8K) 2/4WD 2007-Audi S5 Sedan/Convertible Sportback Type B8 (8K) 2/4WD (A5/S5 last 5 digits of the chassis number 11201) 2007-Front axle 30mm/Rear axle 24mm.