In this category you will find parts that improve the stabilization and road holding of your car. For example, we have strut baces that aim to make the body stiffer and thus prevent torsion in the chassis and bodywork. This allows you to drive through corners more sportively and harder.
Anti roll bars and sway bars also ensure that you can ride through the curves more easily. However, this is because they provide a rolling stiffness of the rear axle or front axle. It ensures that the car is straight and thus more stable through the corners. These are attached to the strut or support arm on both sides by means of drop links. When lowering the car, shorter drop links are needed to adjust the 'camber' of your wheels.
We also have polyurethane rubbers in our Powerflex range. This polyurethane rubber has several advantages over the normal rubbers. Not only the durability of polyurethane is many times greater, but it also provides more stability through greater stiffness (25 to 30 percent).
If you can not find certain items in our webshop, ask one of our employees.
H&R Set of Anti-Roll Bars Audi A5/S5/RS5 Coupé/Sportback/Convertible 2016- Audi A4/S4/RS4 Sedan/Avant 2015- FA32/RA22mm
H&R Set of Anti-Roll Bars Audi A5/S5/RS5 Coupé/Sportback/Convertible 2016- Audi A4/S4/RS4 Sedan/Avant 2015- FA32/RA22mmMade of high-tensile steel with precise forged ends, powder coating and composite rubber bearing H&R Anti-Roll Bars ensure highest quality and persistence. Most of the H&R Anti-Roll Bars have a muiltihole end to adjust the self-steering behavior (over-/understeering) of the vehicle. Reduces body roll and increases agility with a minimal loss of comfort. Compatible with all OEM and sport suspension systems. Product characteristics:High-tensile steelPrecise forged endsPowder coatingComposite rubber bearingOver-/understeering adjustableLess body rollHigher agilityMinimal loss of comfortMade in GermanyDelivered with TÜV approval or ABE :Audi A5 Type B8/B9 (F5), 2/4WD, Coupé/Sportback/Convertible, 2016- Front axle 32mm / Rear axle 22mmAudi S5 Type B8/B9 (F5), 4WD, Coupé/Sportback/Convertible, 2016- Front axle 32mm / Rear axle 22mmAudi RS5 Type B8/B9 (F5), 4WD, Coupé/Sportback, 2017- Front axle 32mm / Rear axle 22mmAudi A4 Type B8/B9, 2/4WD, Sedan/Avant, 2015- Front axle 32mm / Rear axle 22mmAudi S4 Type B8/B9, 4WD, Sedan/Avant, 2016- Front axle 32mm / Rear axle 22mmAudi RS4 Type B8/B9, 4WD, Sedan/Avant, 2017- Front axle 32mm / Rear axle 22mm
H&R Set of Anti-Roll Bars Audi A6 Sedan/Avant - 2/4WD - 2011- - 32/26mm
H&R Set of Anti-Roll Bars Audi A6 Sedan/Avant - 2/4WD - 2011- - 32/26mmMade of high-tensile steel with precise forged ends, powder coating and composite rubber bearing H&R Anti-Roll Bars ensure highest quality and persistence. Most of the H&R Anti-Roll Bars have a muiltihole end to adjust the self-steering behavior (over-/understeering) of the vehicle. Reduces body roll and increases agility with a minimal loss of comfort. Compatible with all OEM and sport suspension systems.Product characteristics:High-tensile steelPrecise forged endsPowder coatingComposite rubber bearingOver-/understeering adjustableLess body rollHigher agilityMinimal loss of comfortMade in GermanyDelivered with TÜV approval or ABE:Audi A6 Sedan/Avant Type 4G/4G1 2/4WD 2011-
H&R Set of Anti-Roll Bars Audi A6 Sedan/Avant Quattro 1997- FA32/RA22mm
H&R Set of Anti-Roll Bars Audi A6 Sedan/Avant Quattro 1997- FA32/RA22mmMade of high-tensile steel with precise forged ends, powder coating and composite rubber bearing H&R Anti-Roll Bars ensure highest quality and persistence. Most of the H&R Anti-Roll Bars have a muiltihole end to adjust the self-steering behavior (over-/understeering) of the vehicle. Reduces body roll and increases agility with a minimal loss of comfort. Compatible with all OEM and sport suspension systems.Product characteristics:High-tensile steelPrecise forged endsPowder coatingComposite rubber bearingOver-/understeering adjustableLess body rollHigher agilityMinimal loss of comfortMade in GermanyDelivered with TÜV approval or ABE:Audi A6 Sedan/Avant Quattro Type 4B, 4WD 1997- Front axle 32mm/Rear axle 22mm
H&R Set of Anti-Roll Bars Audi A6 Sedan/Avant Quattro 2004- FA32/RA25mm
H&R Set of Anti-Roll Bars Audi A6 Sedan/Avant Quattro 2004- FA32/RA25mmMade of high-tensile steel with precise forged ends, powder coating and composite rubber bearing H&R Anti-Roll Bars ensure highest quality and persistence. Most of the H&R Anti-Roll Bars have a muiltihole end to adjust the self-steering behavior (over-/understeering) of the vehicle. Reduces body roll and increases agility with a minimal loss of comfort. Compatible with all OEM and sport suspension systems.Product characteristics:High-tensile steelPrecise forged endsPowder coatingComposite rubber bearingOver-/understeering adjustableLess body rollHigher agilityMinimal loss of comfortMade in GermanyDelivered with TÜV approval or ABE:Audi A6 Sedan/Avant including Quattro Type 4F, 2/4WD 2004- Front axle 32mm/Rear axle 25mm
H&R Set of Anti-Roll Bars Audi Q5/SQ5/A6 4WD 2017- FA34/RA27mm
H&R Set of Anti-Roll Bars Audi Q5/SQ5/A6 4WD 2017- FA34/RA27mmMade of high-tensile steel with precise forged ends, powder coating and composite rubber bearing H&R Anti-Roll Bars ensure highest quality and persistence. Most of the H&R Anti-Roll Bars have a muiltihole end to adjust the self-steering behavior (over-/understeering) of the vehicle. Reduces body roll and increases agility with a minimal loss of comfort. Compatible with all OEM and sport suspension systems.Product characteristics:High-tensile steelPrecise forged endsPowder coatingComposite rubber bearingOver-/understeering adjustableLess body rollHigher agilityMinimal loss of comfortMade in GermanyDelivered with TÜV approval or ABE:Audi Q5/SQ5 Type FY, 4WD, except for air-suspension, 2017- Front axle 34mm / Rear axle 27mmAudi A6 Sedan/Avant Type F2, 4WD, except for air-suspension 2018- Front axle 34mm / Rear axle 27mm
H&R Set of Anti-Roll Bars Audi RS3 Sportback Quattro 2011- FA24/RA22mm
H&R Set of Anti-Roll Bars Audi RS3 Sportback Quattro 2011- FA24/RA22mmMade of high-tensile steel with precise forged ends, powder coating and composite rubber bearing H&R Anti-Roll Bars ensure highest quality and persistence. Most of the H&R Anti-Roll Bars have a muiltihole end to adjust the self-steering behavior (over-/understeering) of the vehicle. Reduces body roll and increases agility with a minimal loss of comfort. Compatible with all OEM and sport suspension systems.Product characteristics:High-tensile steelPrecise forged endsPowder coatingComposite rubber bearingOver-/understeering adjustableLess body rollHigher agilityMinimal loss of comfortMade in GermanyDelivered with TÜV approval or ABE:Audi RS3 Sportback RS Type 8P Quattro 2011- Front axle 24mm/Rear axle 22mm
H&R Set of Anti-Roll Bars Audi RS3 Sportback Quattro 2015-/RS3 Sedan 2017- 27/25mm
H&R Set of Anti-Roll Bars Audi RS3 Sportback Quattro 2015-/RS3 Sedan 2017- 27/25mmMade of high-tensile steel with precise forged ends, powder coating and composite rubber bearing H&R Anti-Roll Bars ensure highest quality and persistence. Most of the H&R Anti-Roll Bars have a muiltihole end to adjust the self-steering behavior (over-/understeering) of the vehicle. Reduces body roll and increases agility with a minimal loss of comfort. Compatible with all OEM and sport suspension systems.Product characteristics:High-tensile steelPrecise forged endsPowder coatingComposite rubber bearingOver-/understeering adjustableLess body rollHigher agilityMinimal loss of comfortMade in GermanyDelivered with TÜV approval or ABE:Audi RS3 Sportback Quattro Type 8V 4WD 2015-Audi RS3 Sedan Type 8V 2017-
H&R Set of Anti-Roll Bars Audi RS4 Sedan/Avant/Cabrio 4.2L - 4WD - 2005- - 32/24mm
H&R Set of Anti-Roll Bars Audi RS4 Sedan/Avant/Cabrio 4.2L - 4WD - 2005- - 32/24mmMade of high-tensile steel with precise forged ends, powder coating and composite rubber bearing H&R Anti-Roll Bars ensure highest quality and persistence. Most of the H&R Anti-Roll Bars have a muiltihole end to adjust the self-steering behavior (over-/understeering) of the vehicle. Reduces body roll and increases agility with a minimal loss of comfort. Compatible with all OEM and sport suspension systems.Product characteristics:High-tensile steelPrecise forged endsPowder coatingComposite rubber bearingOver-/understeering adjustableLess body rollHigher agilityMinimal loss of comfortMade in GermanyDelivered with TÜV approval or ABE:Audi RS4 Sedan/Avant/Cabrio Type QB6 V8 4.2L FSI Quattro 4WD 2005-
H&R Set of Anti-Roll Bars Audi S4 Sedan/Avant Quattro 4WD 2003- FA32/RA22mm
H&R Set of Anti-Roll Bars Audi S4 Sedan/Avant Quattro 4WD 2003- FA32/RA22mmMade of high-tensile steel with precise forged ends, powder coating and composite rubber bearing H&R Anti-Roll Bars ensure highest quality and persistence. Most of the H&R Anti-Roll Bars have a muiltihole end to adjust the self-steering behavior (over-/understeering) of the vehicle. Reduces body roll and increases agility with a minimal loss of comfort. Compatible with all OEM and sport suspension systems.Product characteristics:High-tensile steelPrecise forged endsPowder coatingComposite rubber bearingOver-/understeering adjustableLess body rollHigher agilityMinimal loss of comfortMade in GermanyDelivered with TÜV approval or ABE:Audi S4 Sedan/Avant Quattro Type 8E (B6/B7), 4WD, S4 V8, including Facelift model 2005 2003- Front axle 32mm/Rear axle 22mm
H&R Set of Anti-Roll Bars Audi TT Coupé/Cabrio Quattro - 4WD - 2006- - 24/22mm
H&R Set of Anti-Roll Bars Audi TT Coupé/Cabrio Quattro - 4WD - 2006- - 24/22mmMade of high-tensile steel with precise forged ends, powder coating and composite rubber bearing H&R Anti-Roll Bars ensure highest quality and persistence. Most of the H&R Anti-Roll Bars have a muiltihole end to adjust the self-steering behavior (over-/understeering) of the vehicle. Reduces body roll and increases agility with a minimal loss of comfort. Compatible with all OEM and sport suspension systems.Product characteristics:High-tensile steelPrecise forged endsPowder coatingComposite rubber bearingOver-/understeering adjustableLess body rollHigher agilityMinimal loss of comfortMade in GermanyDelivered with TÜV approval or ABE:Audi TT Coupé/Cabrio Quattro Type 8J 4WD 2006-
H&R Set of Anti-Roll Bars Audi TT Coupé/Convertible 2WD 1998- FA25/RA25mm
H&R Set of Anti-Roll Bars Audi TT Coupé/Convertible 2WD 1998- FA25/RA25mmMade of high-tensile steel with precise forged ends, powder coating and composite rubber bearing H&R Anti-Roll Bars ensure highest quality and persistence. Most of the H&R Anti-Roll Bars have a muiltihole end to adjust the self-steering behavior (over-/understeering) of the vehicle. Reduces body roll and increases agility with a minimal loss of comfort. Compatible with all OEM and sport suspension systems.Product characteristics:High-tensile steelPrecise forged endsPowder coatingComposite rubber bearingOver-/understeering adjustableLess body rollHigher agilityMinimal loss of comfortMade in GermanyDelivered with TÜV approval or ABE:Audi TT Coupé/Convertible Type 8N, 2WD (Stabilizer-holder at the shock-absorber) 1998- Front axle 25mm/Rear axle 25mm
H&R Set of Anti-Roll Bars Audi TT RS Quattro Coupé/Cabrio - 4WD - 2006- - 24/22mm
H&R Set of Anti-Roll Bars Audi TT RS Quattro Coupé/Cabrio - 4WD - 2006- - 24/22mmMade of high-tensile steel with precise forged ends, powder coating and composite rubber bearing H&R Anti-Roll Bars ensure highest quality and persistence. Most of the H&R Anti-Roll Bars have a muiltihole end to adjust the self-steering behavior (over-/understeering) of the vehicle. Reduces body roll and increases agility with a minimal loss of comfort. Compatible with all OEM and sport suspension systems.Product characteristics:High-tensile steelPrecise forged endsPowder coatingComposite rubber bearingOver-/understeering adjustableLess body rollHigher agilityMinimal loss of comfortMade in GermanyDelivered with TÜV approval or ABE:Audi TT RS Quattro Coupé/Cabrio Type 8J 4WD 2006-
H&R Set of Anti-Roll Bars Audi/Seat/Skoda/Volkswagen 2003- FA26/RA22mm
H&R Set of Anti-Roll Bars Audi/Seat/Skoda/Volkswagen 2003- FA26/RA22mmMade of high-tensile steel with precise forged ends, powder coating and composite rubber bearing H&R Anti-Roll Bars ensure highest quality and persistence. Most of the H&R Anti-Roll Bars have a muiltihole end to adjust the self-steering behavior (over-/understeering) of the vehicle. Reduces body roll and increases agility with a minimal loss of comfort. Compatible with all OEM and sport suspension systems.Product characteristics:High-tensile steelPrecise forged endsPowder coatingComposite rubber bearingOver-/understeering adjustableLess body rollHigher agilityMinimal loss of comfortMade in GermanyDelivered with TÜV approval or ABE:Audi A3 (Sportback) including Convertible Type 8P/8PB, 2WD 2003-Audi TT Coupé/Convertible Type 8J, 2WD 2006-Seat Altea including XL Type 5P/5PN, 2WD 2004-Seat Leon Type 1P/1PN, 2WD 2004-Seat Toledo Type 5P, 2WD 2004-Skoda Octavia Sedan/SW including RS Type 1Z, 2WD 2004-Skoda Superb Sedan Type 3T, 2WD 2008-Volkswagen Beetle Type 16, only 2.0L Turbo 2011-Volkswagen EOS Type 1F, 2WD 2003-Volkswagen Golf V Sedan/GTI/Golf Plus Type 1K/1KP, 2WD 2003-Volkswagen Jetta V Sedan Type 1KM, 2WD 2003-Volkswagen Passat Sedan/Combi + CC 2005-Volkswagen Touran/Cross Touran Type 1T, 2WD 2005-Front axle 26mm/Rear axle 22mm
H&R Set of Anti-Roll Bars Audi/Seat/Skoda/Volkswagen 2003- FA28/RA24mm
H&R Set of Anti-Roll Bars Audi/Seat/Skoda/Volkswagen 2003- FA28/RA24mmMade of high-tensile steel with precise forged ends, powder coating and composite rubber bearing H&R Anti-Roll Bars ensure highest quality and persistence. Most of the H&R Anti-Roll Bars have a muiltihole end to adjust the self-steering behavior (over-/understeering) of the vehicle. Reduces body roll and increases agility with a minimal loss of comfort. Compatible with all OEM and sport suspension systems.Product characteristics:High-tensile steelPrecise forged endsPowder coatingComposite rubber bearingOver-/understeering adjustableLess body rollHigher agilityMinimal loss of comfortMade in GermanyDelivered with TÜV approval or ABE:Audi A3 (Sportback) including Convertible Type 8P/8PB, 2WD 2003-Audi TT Coupé/Convertible Type 8J, 2WD 2006-Seat Altea/Toledo including XL Type 5P/5PN, 2WD 2004-Seat Leon Type 1P/1PN, 2WD 2004-Skoda Octavia Sedan/SW including RS Type 1Z, 2WD 2004-Skoda Superb Sedan Type 3T, 2WD 2008-Volkswagen Beetle Type 16, only 2.0L Turbo 2011-Volkswagen EOS Type 1F, 2WD 2003-Volkswagen Golf V Sedan/GTI/Golf Plus Type 1K/1KP, 2WD 2003-Volkswagen Jetta V Sedan Type 1KM, 2WD 2003-Volkswagen Passat Sedan/SW/CC Type 3C, 3CC, 3c, 2WD 2005-Volkswagen Touran/Cross Touran Type 1T, 2WD 2005-Front axle 28mm/Rear axle 24mm.
H&R Set of Anti-Roll Bars Audi/Skoda/Volkswagen 2003- FA24/RA26mm
H&R Set of Anti-Roll Bars Audi/Skoda/Volkswagen 2003- FA24/RA26mmMade of high-tensile steel with precise forged ends, powder coating and composite rubber bearing H&R Anti-Roll Bars ensure highest quality and persistence. Most of the H&R Anti-Roll Bars have a muiltihole end to adjust the self-steering behavior (over-/understeering) of the vehicle. Reduces body roll and increases agility with a minimal loss of comfort. Compatible with all OEM and sport suspension systems.Product characteristics:High-tensile steelPrecise forged endsPowder coatingComposite rubber bearingOver-/understeering adjustableLess body rollHigher agilityMinimal loss of comfortMade in GermanyDelivered with TÜV approval or ABE:Audi A3/A3 Sportback including Convertible Type 8P/8PB, 4WD 2003-Audi S3/S3 Sportback Type 8P, 4WD 2003-Skoda Octavia Sedan/SW including RS Type 1Z, 4WD 2004-Skoda Superb Sedan Type 3T, 4WD 2008-Volkswagen Golf V 4-motion including R32 Type 1K, 4WD 2004-Volkswagen Golf VI 4-Motion Type 1K, including Golf R/R32 2010-Volkswagen Passat Sedan/SW including CC Type 3C/3CC/3c, 4WD 2005-Volkswagen Tiguan Type 5N, 4WD 2007-Front axle 24mm/Rear axle 26mm.
H&R Set of Anti-Roll Bars BMW 1/2/3/4-Series F20-F23/F30-F34 /F36 2011- 6-Cylinder 4WD/xDrive 28/20mm
H&R Set of Anti-Roll Bars BMW 1/2/3/4-Series F20-F23/F30-F34 /F36 2011- 6-Cylinder 4WD/xDrive 28/20mmMade of high-tensile steel with precise forged ends, powder coating and composite rubber bearing H&R Anti-Roll Bars ensure highest quality and persistence. Most of the H&R Anti-Roll Bars have a muiltihole end to adjust the self-steering behavior (over-/understeering) of the vehicle. Reduces body roll and increases agility with a minimal loss of comfort. Compatible with all OEM and sport suspension systems.Product characteristics:High-tensile steelPrecise forged endsPowder coatingComposite rubber bearingOver-/understeering adjustableLess body rollHigher agilityMinimal loss of comfortMade in GermanyDelivered with TÜV approval or ABE:BMW 1-Series F20/F21 (including M135i/M140i 4WD) Type 1K2/1K4 4WD/xDrive all 6-Cylinder 2011-BMW 2-Series F22/F23 (including M235i/M240i 4WD) Type 1K2/1K4 4WD/xDrive all 6-Cylinder 2011-BMW 3-Series F30/F31/F34 Sedan/Touring Type 3L/3K/3-V 4WD/xDrive all 6-Cylinder 2011-BMW 4-Series Coupé F32/F33/F36 including Cabrio Type 3C 4WD/xDrive all 6-Cylinder 2011-
H&R Set of Anti-Roll Bars BMW 1/2/3/4-Series F20-F23/F30-F34/F36 2011- - 2WD - 28/20mm
H&R Set of Anti-Roll Bars BMW 1/2/3/4-Series F20-F23/F30-F34/F36 2011- - 2WD - 28/20mmMade of high-tensile steel with precise forged ends, powder coating and composite rubber bearing H&R Anti-Roll Bars ensure highest quality and persistence. Most of the H&R Anti-Roll Bars have a muiltihole end to adjust the self-steering behavior (over-/understeering) of the vehicle. Reduces body roll and increases agility with a minimal loss of comfort. Compatible with all OEM and sport suspension systems.Product characteristics:High-tensile steelPrecise forged endsPowder coatingComposite rubber bearingOver-/understeering adjustableLess body rollHigher agilityMinimal loss of comfortMade in GermanyDelivered with TÜV approval or ABE:BMW 1-Series F20/F21 Type 1K2/1K4 2WD only 120i/125i 2011-BMW 2-Series F22/F23 Type 1K2/1K4 2WD only 220i/228i 2011-BMW 3-Series F30/F31/F34 Sedan/Touring Type 3L/3K/3-V 2WD only 320i/328i 2011-BMW 4-Series Coupé F32/F33/F36 including Cabrio Type 3C 2WD only 420i/428i 2011-
H&R Set of Anti-Roll Bars BMW 1/2/3/4-Series F20-F23/F30-F34/F36 2011- - 4WD - 28/20mm
H&R Set of Anti-Roll Bars BMW 1/2/3/4-Series F20-F23/F30-F34/F36 2011- - 4WD - 28/20mmMade of high-tensile steel with precise forged ends, powder coating and composite rubber bearing H&R Anti-Roll Bars ensure highest quality and persistence. Most of the H&R Anti-Roll Bars have a muiltihole end to adjust the self-steering behavior (over-/understeering) of the vehicle. Reduces body roll and increases agility with a minimal loss of comfort. Compatible with all OEM and sport suspension systems.Product characteristics:High-tensile steelPrecise forged endsPowder coatingComposite rubber bearingOver-/understeering adjustableLess body rollHigher agilityMinimal loss of comfortMade in GermanyDelivered with TÜV approval or ABE:BMW 1-Series F20/F21 Type 1K2/1K4 4WD only 120xi/125xi 2011-BMW 2-Series F22/F23 Type 1K2/1K4 4WD only 220xi/228xi 2011-BMW 3-Series F30/F31/F34 Sedan/Touring Type 3L/3K/3-V 4WD/xDrive only 320xi/328xi 2011-BMW 4-Series Coupé F32/F33/F36 including Cabrio Type 3C 4WD/xDrive only 420xi/428xi 2011-
H&R Set of Anti-Roll Bars BMW 1/2/3/4-Series F20-F23/F30-F34/F36 2011- 4-Cylinder 2WD 28/20mm
H&R Set of Anti-Roll Bars BMW 1/2/3/4-Series F20-F23/F30-F34/F36 2011- 4-Cylinder 2WD 28/20mmMade of high-tensile steel with precise forged ends, powder coating and composite rubber bearing H&R Anti-Roll Bars ensure highest quality and persistence. Most of the H&R Anti-Roll Bars have a muiltihole end to adjust the self-steering behavior (over-/understeering) of the vehicle. Reduces body roll and increases agility with a minimal loss of comfort. Compatible with all OEM and sport suspension systems.Product characteristics:High-tensile steelPrecise forged endsPowder coatingComposite rubber bearingOver-/understeering adjustableLess body rollHigher agilityMinimal loss of comfortMade in GermanyDelivered with TÜV approval or ABE:BMW 1-Series F20/F21 Type 1K2/1K4 2WD all 4-Cylinder except 120i/125i 2011-BMW 2-Series F22/F23 Type 1K2/1K4 2WD all 4-Cylinder except 220i/228i 2011-BMW 3-Series F30/F31/F34 Sedan/Touring Type 3L/3K/3-V 2 WD all 4-Cylinder except 320i/328i 2011-BMW 4-Series Coupé F32/F33/F36 including Cabrio Type 3C 2WD all 4-Cylinder except 420i/428i 2011-
H&R Set of Anti-Roll Bars BMW 1/2/3/4-Series F20-F23/F30-F34/F36 2011- 4-Cylinder 4WD/xDrive 28/20mm
H&R Set of Anti-Roll Bars BMW 1/2/3/4-Series F20-F23/F30-F34/F36 2011- 4-Cylinder 4WD/xDrive 28/20mmMade of high-tensile steel with precise forged ends, powder coating and composite rubber bearing H&R Anti-Roll Bars ensure highest quality and persistence. Most of the H&R Anti-Roll Bars have a muiltihole end to adjust the self-steering behavior (over-/understeering) of the vehicle. Reduces body roll and increases agility with a minimal loss of comfort. Compatible with all OEM and sport suspension systems.Product characteristics:High-tensile steelPrecise forged endsPowder coatingComposite rubber bearingOver-/understeering adjustableLess body rollHigher agilityMinimal loss of comfortMade in GermanyDelivered with TÜV approval or ABE:BMW 1-Series F20/F21 Type 1K2/1K4 4WD/xDrive all 4-Cylinder except 120xi/125xi 2011-BMW 2-Series F22/F23 Type 1K2/1K4 4WD/xDrive all 4-Cylinder except 220i/228i 2011-BMW 3-Series F30/F31/F34 Sedan/Touring Type 3L/3K/3-V 4WD/xDrive all 4-Cylinder except 320xi/328xi 2011-BMW 4-Series Coupé F32/F33/F36 including Cabrio Type 3C 4WD/xDrive all 4-Cylinder except 420xi/428xi 2011-
H&R Set of Anti-Roll Bars BMW 1/2/3/4-Series F20-F23/F30-F34/F36 2011- 6-Cylinder 2WD 28/20mm
H&R Set of Anti-Roll Bars BMW 1/2/3/4-Series F20-F23/F30-F34/F36 2011- 6-Cylinder 2WD 28/20mmMade of high-tensile steel with precise forged ends, powder coating and composite rubber bearing H&R Anti-Roll Bars ensure highest quality and persistence. Most of the H&R Anti-Roll Bars have a muiltihole end to adjust the self-steering behavior (over-/understeering) of the vehicle. Reduces body roll and increases agility with a minimal loss of comfort. Compatible with all OEM and sport suspension systems.Product characteristics:High-tensile steelPrecise forged endsPowder coatingComposite rubber bearingOver-/understeering adjustableLess body rollHigher agilityMinimal loss of comfortMade in GermanyDelivered with TÜV approval or ABE:BMW 1-Series F20/F21 (including M135i/M140i 2WD) Type 1K2/1K4 2WD all 6-Cylinder 2011-BMW 2-Series F22/F23 (including M235i/M240i 2WD) Type 1K2/1K4 2WD all 6-Cylinder 2011-BMW 3-Series F30/F31/F34 Sedan/Touring Type 3L/3K/3-V 2WD all 6-Cylinder 2011-BMW 4-Series Coupé F32/F33/F36 including Cabrio Type 3C 2WD all 6-Cylinder 2011-
H&R Set of Anti-Roll Bars BMW 1/3-Series 2007- FA27/RA23mm
H&R Set of Anti-Roll Bars BMW 1/3-Series 2007- FA27/RA23mmMade of high-tensile steel with precise forged ends, powder coating and composite rubber bearing H&R Anti-Roll Bars ensure highest quality and persistence. Most of the H&R Anti-Roll Bars have a muiltihole end to adjust the self-steering behavior (over-/understeering) of the vehicle. Reduces body roll and increases agility with a minimal loss of comfort. Compatible with all OEM and sport suspension systems.Product characteristics:High-tensile steelPrecise forged endsPowder coatingComposite rubber bearingOver-/understeering adjustableLess body rollHigher agilityMinimal loss of comfortMade in GermanyDelivered with TÜV approval or ABE:BMW 1-Series M-Coupé Type M-V 2011- Front axle 27mm/Rear axle 23mmBMW 3-Series (E90/E92/E93) V8 M3 Sedan/Coupé/Convertible Type M390 + M3 2007- Front axle 27mm/Rear axle 23mm
H&R Set of Anti-Roll Bars BMW 1/3-Series 2WD 2004- FA27/RA20mm
H&R Set of Anti-Roll Bars BMW 1/3-Series 2WD 2004- FA27/RA20mmMade of high-tensile steel with precise forged ends, powder coating and composite rubber bearing H&R Anti-Roll Bars ensure highest quality and persistence. Most of the H&R Anti-Roll Bars have a muiltihole end to adjust the self-steering behavior (over-/understeering) of the vehicle. Reduces body roll and increases agility with a minimal loss of comfort. Compatible with all OEM and sport suspension systems.Attention: The front Anti-Roll Bar does not come with rubbers, the original OE rubbers from the car need to be transferred to the H&R Anti-Roll Bar.Product characteristics:High-tensile steelPrecise forged endsPowder coatingComposite rubber bearingOver-/understeering adjustableLess body rollHigher agilityMinimal loss of comfortMade in GermanyDelivered with TÜV approval or ABE :BMW 1-Series (E81/E82/E87/E88) Sedan/Coupé/Convertible Type 187/182/1K2/1K4/1C, 2WD 2004- Front axle 27mm/Rear axle 20mmBMW 3-Series (E90/E92) Sedan/Coupé & 3-Series (E91) Touring & 3-Series (E93) Convertible Type 390L/392C/3K/3L/3C, 2WD 2005- Front axle 27mm/Rear axle 20mm
H&R Set of Anti-Roll Bars BMW 3-Series E30 2WD 1982- FA22/RA18mm
H&R Set of Anti-Roll Bars BMW 3-Series E30 2WD 1982- FA22/RA18mmMade of high-tensile steel with precise forged ends, powder coating and composite rubber bearing H&R Anti-Roll Bars ensure highest quality and persistence. Most of the H&R Anti-Roll Bars have a muiltihole end to adjust the self-steering behavior (over-/understeering) of the vehicle. Reduces body roll and increases agility with a minimal loss of comfort. Compatible with all OEM and sport suspension systems.Product characteristics:High-tensile steelPrecise forged endsPowder coatingComposite rubber bearingOver-/understeering adjustableLess body rollHigher agilityMinimal loss of comfortMade in GermanyDelivered with TÜV approval or ABE:BMW 3-Series (E30) including M3 Sedan/Convertible/Touring Type 3/1 & 3/R, 2WD, including M3 1982- Front axle 22mm/Rear axle 18mm
H&R Set of Anti-Roll Bars BMW 3-Series E36 1992- FA28/RA21mm
H&R Set of Anti-Roll Bars BMW 3-Series E36 1992- FA28/RA21mmMade of high-tensile steel with precise forged ends, powder coating and composite rubber bearing H&R Anti-Roll Bars ensure highest quality and persistence. Most of the H&R Anti-Roll Bars have a muiltihole end to adjust the self-steering behavior (over-/understeering) of the vehicle. Reduces body roll and increases agility with a minimal loss of comfort. Compatible with all OEM and sport suspension systems.Product characteristics:High-tensile steelPrecise forged endsPowder coatingComposite rubber bearingOver-/understeering adjustableLess body rollHigher agilityMinimal loss of comfortMade in GermanyDelivered with TÜV approval or ABE:BMW 3-Series (E36) Sedan/Coupé/Cario/Touring Type 3C, 3/C, 3B, 3/B 1992- Front axle 28mm/Rear axle 21mm
H&R Set of Anti-Roll Bars BMW 3-Series E36 Compact 1994- FA28/RA19mm
H&R Set of Anti-Roll Bars BMW 3-Series E36 Compact 1994- FA28/RA19mmMade of high-tensile steel with precise forged ends, powder coating and composite rubber bearing H&R Anti-Roll Bars ensure highest quality and persistence. Most of the H&R Anti-Roll Bars have a muiltihole end to adjust the self-steering behavior (over-/understeering) of the vehicle. Reduces body roll and increases agility with a minimal loss of comfort. Compatible with all OEM and sport suspension systems.Product characteristics:High-tensile steelPrecise forged endsPowder coatingComposite rubber bearingOver-/understeering adjustableLess body rollHigher agilityMinimal loss of comfortMade in GermanyDelivered with TÜV approval or ABE:BMW 3-Series (E36) Compact Type 3C, 3/CG 1994- Front axle 28mm/Rear axle 19mm
H&R Set of Anti-Roll Bars BMW 3-Series E36 M3 1993- FA28/RA24mm
H&R Set of Anti-Roll Bars BMW 3-Series E36 M3 1993- FA28/RA24mmMade of high-tensile steel with precise forged ends, powder coating and composite rubber bearing H&R Anti-Roll Bars ensure highest quality and persistence. Most of the H&R Anti-Roll Bars have a muiltihole end to adjust the self-steering behavior (over-/understeering) of the vehicle. Reduces body roll and increases agility with a minimal loss of comfort. Compatible with all OEM and sport suspension systems.Product characteristics:High-tensile steelPrecise forged endsPowder coatingComposite rubber bearingOver-/understeering adjustableLess body rollHigher agilityMinimal loss of comfortMade in GermanyDelivered with TÜV approval or ABE:BMW 3-Series (E36) M3 Sedan/Convertible Type M3B, M3/B 1993- Front axle 28mm/Rear axle 24mm
H&R Set of Anti-Roll Bars BMW 3-Series E46 2WD 1998-2001 FA27/RA21mm
H&R Set of Anti-Roll Bars BMW 3-Series E46 2WD 1998-2001 FA27/RA21mmMade of high-tensile steel with precise forged ends, powder coating and composite rubber bearing H&R Anti-Roll Bars ensure highest quality and persistence. Most of the H&R Anti-Roll Bars have a muiltihole end to adjust the self-steering behavior (over-/understeering) of the vehicle. Reduces body roll and increases agility with a minimal loss of comfort. Compatible with all OEM and sport suspension systems.Product characteristics:High-tensile steelPrecise forged endsPowder coatingComposite rubber bearingOver-/understeering adjustableLess body rollHigher agilityMinimal loss of comfortMade in GermanyDelivered with TÜV approval or ABE:BMW 3-Series (E46) Coupé/Convertible/Touring/Sedan Type 346L/346C/346R, 2WD 1998-2001 Front axle 27mm/Rear axle 21mm
H&R Set of Anti-Roll Bars BMW 3-Series E46 M3 2000- FA30/RA25mm
H&R Set of Anti-Roll Bars BMW 3-Series E46 M3 2000- FA30/RA25mmMade of high-tensile steel with precise forged ends, powder coating and composite rubber bearing H&R Anti-Roll Bars ensure highest quality and persistence. Most of the H&R Anti-Roll Bars have a muiltihole end to adjust the self-steering behavior (over-/understeering) of the vehicle. Reduces body roll and increases agility with a minimal loss of comfort. Compatible with all OEM and sport suspension systems.Product characteristics:High-tensile steelPrecise forged endsPowder coatingComposite rubber bearingOver-/understeering adjustableLess body rollHigher agilityMinimal loss of comfortMade in GermanyDelivered with TÜV approval or ABE:BMW 3-Series (E46) M3 Coupé/Convertible/Sedan Type M346 2000- Front axle 30mm/Rear axle 25mm
H&R Set of Anti-Roll Bars BMW 3-Series G20/G21 4/6 Cilinder incl. M340d/i xDrive 2019- & 4-Series G22/G23 incl. M440i/d xDrive & 2-Series Coupé G42 xDrive 2021- VA26/19mm
H&R Set of Anti-Roll Bars BMW 3-Series G20/G21 4/6 Cilinder incl. M340d/i xDrive 2019- & 4-Series G22/G23 incl. M440i/d xDrive & 2-Series Coupé G42 xDrive 2021- VA26/19mmMade of high-tensile steel with precise forged ends, powder coating and composite rubber bearing H&R Anti-Roll Bars ensure highest quality and persistence. Most of the H&R Anti-Roll Bars have a muiltihole end to adjust the self-steering behavior (over-/understeering) of the vehicle. Reduces body roll and increases agility with a minimal loss of comfort. Compatible with all OEM and sport suspension systems. Product characteristics:High-tensile steelPrecise forged endsPowder coatingComposite rubber bearingOver-/understeering adjustableLess body rollHigher agilityMinimal loss of comfortMade in GermanyDelivered with TÜV approval or ABE :BMW 2-Series Coupe, G42 xDrive 2021-BMW 3-Series Sedan/Touring, G20/G21 2020- 4/6 Cilinder, incl M340i/d xDrive, excl. Plug-in HybridBMW 4-Series Cabrio/Coupe, G22/G23 2020- 4/6 Cilinder, incl. M440i/d xDrive, excl. Plug-in Hybrid
H&R Set of Anti-Roll Bars BMW 3/4-Series M3/M4 - F80/F82/F83 - 2014- /BMW 2-Series M2 CS F87 - 2020- 30/25mm
H&R Set of Anti-Roll Bars BMW 3/4-Series M3/M4 - F80/F82/F83 - 2014- /BMW 2-Series M2 CS F87 - 2020- 30/25mmMade of high-tensile steel with precise forged ends, powder coating and composite rubber bearing H&R Anti-Roll Bars ensure highest quality and persistence. Most of the H&R Anti-Roll Bars have a muiltihole end to adjust the self-steering behavior (over-/understeering) of the vehicle. Reduces body roll and increases agility with a minimal loss of comfort. Compatible with all OEM and sport suspension systems.Product characteristics:High-tensile steelPrecise forged endsPowder coatingComposite rubber bearingOver-/understeering adjustableLess body rollHigher agilityMinimal loss of comfortMade in GermanyDelivered with TÜV approval or ABE:BMW 2-Series M2 CS Coupé F87 2020-BMW 3-Series M3 F80 2014-BMW 4-Series M4 Coupé F82/M4 Cabrio F83 2014-
H&R Set of Anti-Roll Bars BMW 5-Series E60 Sedan 2WD/6-Series E63 Coupé/E64 Convertible 2003- FA27/RA19mm
H&R Set of Anti-Roll Bars BMW 5-Series E60 Sedan 2WD/6-Series E63 Coupé/E64 Convertible 2003- FA27/RA19mmMade of high-tensile steel with precise forged ends, powder coating and composite rubber bearing H&R Anti-Roll Bars ensure highest quality and persistence. Most of the H&R Anti-Roll Bars have a muiltihole end to adjust the self-steering behavior (over-/understeering) of the vehicle. Reduces body roll and increases agility with a minimal loss of comfort. Compatible with all OEM and sport suspension systems.Product characteristics:High-tensile steelPrecise forged endsPowder coatingComposite rubber bearingOver-/understeering adjustableLess body rollHigher agilityMinimal loss of comfortMade in GermanyDelivered with TÜV approval or ABE:BMW 5-Series E60 Sedan Type 560L, 2WD, without Dynamic Drive 2003- Front axle 27mm/Rear axle 19mmBMW 6-Series E63 Coupé/E64 Convertible Type 663C, without Dynamic Drive 2004- Front axle 27mm/Rear axle 19mm
H&R Set of Anti-Roll Bars BMW 5-Series F10 2010- 2WD 30/20mm
H&R Set of Anti-Roll Bars BMW 5-Series F10 2010- 2WD 30/20mmMade of high-tensile steel with precise forged ends, powder coating and composite rubber bearing H&R Anti-Roll Bars ensure highest quality and persistence. Most of the H&R Anti-Roll Bars have a muiltihole end to adjust the self-steering behavior (over-/understeering) of the vehicle. Reduces body roll and increases agility with a minimal loss of comfort. Compatible with all OEM and sport suspension systems.Product characteristics:High-tensile steelPrecise forged endsPowder coatingComposite rubber bearingOver-/understeering adjustableLess body rollHigher agilityMinimal loss of comfortMade in GermanyDelivered with TÜV approval or ABE:BMW 5-Series F10 Type 5L 2WD without Dynamic Drive 2010-
H&R Set of Anti-Roll Bars BMW X3 2004- - 26/23mm
H&R Set of Anti-Roll Bars BMW X3 2004- - 26/23mmMade of high-tensile steel with precise forged ends, powder coating and composite rubber bearing H&R Anti-Roll Bars ensure highest quality and persistence. Most of the H&R Anti-Roll Bars have a muiltihole end to adjust the self-steering behavior (over-/understeering) of the vehicle. Reduces body roll and increases agility with a minimal loss of comfort. Compatible with all OEM and sport suspension systems.Product characteristics:High-tensile steelPrecise forged endsPowder coatingComposite rubber bearingOver-/understeering adjustableLess body rollHigher agilityMinimal loss of comfortMade in GermanyDelivered with TÜV approval or ABE:BMW X3 Type X83 2004-
H&R Set of Anti-Roll Bars BMW Z3 M-Roadster/M-Coupé 1996- FA28/RA21mm
H&R Set of Anti-Roll Bars BMW Z3 M-Roadster/M-Coupé 1996- FA28/RA21mmMade of high-tensile steel with precise forged ends, powder coating and composite rubber bearing H&R Anti-Roll Bars ensure highest quality and persistence. Most of the H&R Anti-Roll Bars have a muiltihole end to adjust the self-steering behavior (over-/understeering) of the vehicle. Reduces body roll and increases agility with a minimal loss of comfort. Compatible with all OEM and sport suspension systems.Product characteristics:High-tensile steelPrecise forged endsPowder coatingComposite rubber bearingOver-/understeering adjustableLess body rollHigher agilityMinimal loss of comfortMade in GermanyDelivered with TÜV approval or ABE:BMW Z3 M-Roadster/M-Coupé Type MR/C 1996- Front axle 28mm/Rear axle 21mm
H&R Set of Anti-Roll Bars BMW Z3 Roadster/Coupé E37 1996- FA28/RA19mm
H&R Set of Anti-Roll Bars BMW Z3 Roadster/Coupé E37 1996- FA28/RA19mmMade of high-tensile steel with precise forged ends, powder coating and composite rubber bearing H&R Anti-Roll Bars ensure highest quality and persistence. Most of the H&R Anti-Roll Bars have a muiltihole end to adjust the self-steering behavior (over-/understeering) of the vehicle. Reduces body roll and increases agility with a minimal loss of comfort. Compatible with all OEM and sport suspension systems.Product characteristics:High-tensile steelPrecise forged endsPowder coatingComposite rubber bearingOver-/understeering adjustableLess body rollHigher agilityMinimal loss of comfortMade in GermanyDelivered with TÜV approval or ABE:BMW Z3 Roadster/Coupé (E37) Type R/C 1996- Front axle 28mm/Rear axle 19mm