In this category you will find parts that improve the stabilization and road holding of your car. For example, we have strut baces that aim to make the body stiffer and thus prevent torsion in the chassis and bodywork. This allows you to drive through corners more sportively and harder.
Anti roll bars and sway bars also ensure that you can ride through the curves more easily. However, this is because they provide a rolling stiffness of the rear axle or front axle. It ensures that the car is straight and thus more stable through the corners. These are attached to the strut or support arm on both sides by means of drop links. When lowering the car, shorter drop links are needed to adjust the 'camber' of your wheels.
We also have polyurethane rubbers in our Powerflex range. This polyurethane rubber has several advantages over the normal rubbers. Not only the durability of polyurethane is many times greater, but it also provides more stability through greater stiffness (25 to 30 percent).
If you can not find certain items in our webshop, ask one of our employees.
H&R Set of Anti-Roll Bars Opel Corsa A (Coupé) 1983- FA28/RA24mm
H&R Set of Anti-Roll Bars Opel Corsa A (Coupé) 1983- FA28/RA24mmMade of high-tensile steel with precise forged ends, powder coating and composite rubber bearing H&R Anti-Roll Bars ensure highest quality and persistence. Most of the H&R Anti-Roll Bars have a muiltihole end to adjust the self-steering behavior (over-/understeering) of the vehicle. Reduces body roll and increases agility with a minimal loss of comfort. Compatible with all OEM and sport suspension systems.Product characteristics:High-tensile steelPrecise forged endsPowder coatingComposite rubber bearingOver-/understeering adjustableLess body rollHigher agilityMinimal loss of comfortMade in GermanyDelivered with TÜV approval or ABE:Opel Corsa A (Coupé) Type Corsa-A, Corsa-A-CC 1983- Front axle 26mm/Rear axle 22mm
H&R Set of Anti-Roll Bars Opel Corsa B/Tigra A 1983- FA28/RA24mm
H&R Set of Anti-Roll Bars Opel Corsa B/Tigra A 1983- FA28/RA24mmMade of high-tensile steel with precise forged ends, powder coating and composite rubber bearing H&R Anti-Roll Bars ensure highest quality and persistence. Most of the H&R Anti-Roll Bars have a muiltihole end to adjust the self-steering behavior (over-/understeering) of the vehicle. Reduces body roll and increases agility with a minimal loss of comfort. Compatible with all OEM and sport suspension systems.Product characteristics:High-tensile steelPrecise forged endsPowder coatingComposite rubber bearingOver-/understeering adjustableLess body rollHigher agilityMinimal loss of comfortMade in GermanyDelivered with TÜV approval or ABE:Opel Corsa B/Tigra A Type Corsa B+S93, Type S93 Coupé 1983- Front axle 26mm/Rear axle 22mm
H&R Set of Anti-Roll Bars Opel Corsa C excl. GSI 2000- FA23/RA22mm
H&R Set of Anti-Roll Bars Opel Corsa C excl. GSI 2000- FA23/RA22mmMade of high-tensile steel with precise forged ends, powder coating and composite rubber bearing H&R Anti-Roll Bars ensure highest quality and persistence. Most of the H&R Anti-Roll Bars have a muiltihole end to adjust the self-steering behavior (over-/understeering) of the vehicle. Reduces body roll and increases agility with a minimal loss of comfort. Compatible with all OEM and sport suspension systems.Product characteristics:High-tensile steelPrecise forged endsPowder coatingComposite rubber bearingOver-/understeering adjustableLess body rollHigher agilityMinimal loss of comfortMade in GermanyDelivered with TÜV approval or ABE:Opel Corsa C Type Corsa C (not for GSI) 2000- Front axle 23mm/Rear axle 22mm
H&R Set of Anti-Roll Bars Porsche 911 C2 2WD 2004- FA24/RA24mm
H&R Set of Anti-Roll Bars Porsche 911 C2 2WD 2004- FA24/RA24mmMade of high-tensile steel with precise forged ends, powder coating and composite rubber bearing H&R Anti-Roll Bars ensure highest quality and persistence. Most of the H&R Anti-Roll Bars have a muiltihole end to adjust the self-steering behavior (over-/understeering) of the vehicle. Reduces body roll and increases agility with a minimal loss of comfort. Compatible with all OEM and sport suspension systems.Product characteristics:High-tensile steelPrecise forged endsPowder coatingComposite rubber bearingOver-/understeering adjustableLess body rollHigher agilityMinimal loss of comfortMade in GermanyDelivered with TÜV approval or ABE:Porsche 911 C2 Type 997 2WD Carrera (S) including Facelift model 2008 (exclusive PDK) 2004- Front axle 24mm/Rear axle 24mm
H&R Set of Anti-Roll Bars Porsche 911 C2 2WD 2012- 28/26mm
H&R Set of Anti-Roll Bars Porsche 911 C2 2WD 2012- 28/26mmMade of high-tensile steel with precise forged ends, powder coating and composite rubber bearing H&R Anti-Roll Bars ensure highest quality and persistence. Most of the H&R Anti-Roll Bars have a muiltihole end to adjust the self-steering behavior (over-/understeering) of the vehicle. Reduces body roll and increases agility with a minimal loss of comfort. Compatible with all OEM and sport suspension systems.Product characteristics:High-tensile steelPrecise forged endsPowder coatingComposite rubber bearingOver-/understeering adjustableLess body rollHigher agilityMinimal loss of comfortMade in GermanyDelivered with TÜV approval or ABE:Porsche 911 C2 Type 991 2WD Carrera and Carrera S including Cabrio 2012-
H&R Set of Anti-Roll Bars Porsche 911 C2 2WD Carrera/Convertible/Targa 1997- FA26/RA23mm
H&R Set of Anti-Roll Bars Porsche 911 C2 2WD Carrera/Convertible/Targa 1997- FA26/RA23mmMade of high-tensile steel with precise forged ends, powder coating and composite rubber bearing H&R Anti-Roll Bars ensure highest quality and persistence. Most of the H&R Anti-Roll Bars have a muiltihole end to adjust the self-steering behavior (over-/understeering) of the vehicle. Reduces body roll and increases agility with a minimal loss of comfort. Compatible with all OEM and sport suspension systems.Product characteristics:High-tensile steelPrecise forged endsPowder coatingComposite rubber bearingOver-/understeering adjustableLess body rollHigher agilityMinimal loss of comfortMade in GermanyDelivered with TÜV approval or ABE:Porsche 911 C2 (996) Type 996, 2WD, Carrera/Convertible/Targa 1997- Front axle 26mm/Rear axle 23mm
H&R Set of Anti-Roll Bars Porsche 911 C2 PDK 2WD 2004- FA24/RA24mm
H&R Set of Anti-Roll Bars Porsche 911 C2 PDK 2WD 2004- FA24/RA24mmMade of high-tensile steel with precise forged ends, powder coating and composite rubber bearing H&R Anti-Roll Bars ensure highest quality and persistence. Most of the H&R Anti-Roll Bars have a muiltihole end to adjust the self-steering behavior (over-/understeering) of the vehicle. Reduces body roll and increases agility with a minimal loss of comfort. Compatible with all OEM and sport suspension systems.Product characteristics:High-tensile steelPrecise forged endsPowder coatingComposite rubber bearingOver-/understeering adjustableLess body rollHigher agilityMinimal loss of comfortMade in GermanyDelivered with TÜV approval or ABE:Porsche 911 C2 Type 997 2WD Carrera (S) including Facelift model 2008 only PDK 2004- Front axle 24mm/Rear axle 24mm
H&R Set of Anti-Roll Bars Porsche 911 C2 WTL/911 Turbo 2WD 1989- FA24/RA26mm
H&R Set of Anti-Roll Bars Porsche 911 C2 WTL/911 Turbo 2WD 1989- FA24/RA26mmMade of high-tensile steel with precise forged ends, powder coating and composite rubber bearing H&R Anti-Roll Bars ensure highest quality and persistence. Most of the H&R Anti-Roll Bars have a muiltihole end to adjust the self-steering behavior (over-/understeering) of the vehicle. Reduces body roll and increases agility with a minimal loss of comfort. Compatible with all OEM and sport suspension systems.Product characteristics:High-tensile steelPrecise forged endsPowder coatingComposite rubber bearingOver-/understeering adjustableLess body rollHigher agilityMinimal loss of comfortMade in GermanyDelivered with TÜV approval or ABE:Porsche 911 C2 (964) WTL Type 964 2WD Carrera 2, only for WTL with car-width 1775mm (not for Tiptronic) 1989- Front axle 24mm/Rear axle 26mmPorsche 911 Turbo (965) Type 965, 2WD, Turbo (S)/Turbo 3.6 (not for Tiptronic) 1991- Front axle 24mm/Rear axle 26mm
H&R Set of Anti-Roll Bars Porsche 911 C2/4 - 2/4WD - 1989- - 24/26mm
H&R Set of Anti-Roll Bars Porsche 911 C2/4 - 2/4WD - 1989- - 24/26mmMade of high-tensile steel with precise forged ends, powder coating and composite rubber bearing H&R Anti-Roll Bars ensure highest quality and persistence. Most of the H&R Anti-Roll Bars have a muiltihole end to adjust the self-steering behavior (over-/understeering) of the vehicle. Reduces body roll and increases agility with a minimal loss of comfort. Compatible with all OEM and sport suspension systems.Product characteristics:High-tensile steelPrecise forged endsPowder coatingComposite rubber bearingOver-/understeering adjustableLess body rollHigher agilityMinimal loss of comfortMade in GermanyDelivered with TÜV approval or ABE:Porsche 911 C2/4 Type 964 2/4WD Carrera 2/4 not for Werksturbo-Look (WTL) only for Tiptronic, without TUV approval 1989-
H&R Set of Anti-Roll Bars Porsche 911 C2/4 2/4WD 1989- FA24/RA26mm
H&R Set of Anti-Roll Bars Porsche 911 C2/4 2/4WD 1989- FA24/RA26mmMade of high-tensile steel with precise forged ends, powder coating and composite rubber bearing H&R Anti-Roll Bars ensure highest quality and persistence. Most of the H&R Anti-Roll Bars have a muiltihole end to adjust the self-steering behavior (over-/understeering) of the vehicle. Reduces body roll and increases agility with a minimal loss of comfort. Compatible with all OEM and sport suspension systems.Product characteristics:High-tensile steelPrecise forged endsPowder coatingComposite rubber bearingOver-/understeering adjustableLess body rollHigher agilityMinimal loss of comfortMade in GermanyDelivered with TÜV approval or ABE:Porsche 911 C2/4 Type 964 2/4WD, Carrera 2/4, not for WTL and Tiptronic 1989- Front axle 24mm/Rear axle 26mm
H&R Set of Anti-Roll Bars Porsche 911 C2/4 2/4WD 1993- FA26/RA24mm
H&R Set of Anti-Roll Bars Porsche 911 C2/4 2/4WD 1993- FA26/RA24mmMade of high-tensile steel with precise forged ends, powder coating and composite rubber bearing H&R Anti-Roll Bars ensure highest quality and persistence. Most of the H&R Anti-Roll Bars have a muiltihole end to adjust the self-steering behavior (over-/understeering) of the vehicle. Reduces body roll and increases agility with a minimal loss of comfort. Compatible with all OEM and sport suspension systems.Product characteristics:High-tensile steelPrecise forged endsPowder coatingComposite rubber bearingOver-/understeering adjustableLess body rollHigher agilityMinimal loss of comfortMade in GermanyDelivered with TÜV approval or ABE:Porsche 911 C2/4 (993) Type 993, 2/4WD, Carrera 2/2S/4/4S, Targa/Convertible including Turbo 1993- Front axle 26mm/Rear axle 24mm
H&R Set of Anti-Roll Bars Porsche 911 C4 - 4WD - 2005- - 26/24mm
H&R Set of Anti-Roll Bars Porsche 911 C4 - 4WD - 2005- - 26/24mmMade of high-tensile steel with precise forged ends, powder coating and composite rubber bearing H&R Anti-Roll Bars ensure highest quality and persistence. Most of the H&R Anti-Roll Bars have a muiltihole end to adjust the self-steering behavior (over-/understeering) of the vehicle. Reduces body roll and increases agility with a minimal loss of comfort. Compatible with all OEM and sport suspension systems.Product characteristics:High-tensile steelPrecise forged endsPowder coatingComposite rubber bearingOver-/understeering adjustableLess body rollHigher agilityMinimal loss of comfortMade in GermanyDelivered with TÜV approval or ABE:Porsche 911 C4 Type 997 4WD Carrera and Carrera S including Facelift model 2008, without PDK 2005-
H&R Set of Anti-Roll Bars Porsche 911 C4 4WD 2012- 28/26mm
H&R Set of Anti-Roll Bars Porsche 911 C4 4WD 2012- 28/26mmMade of high-tensile steel with precise forged ends, powder coating and composite rubber bearing H&R Anti-Roll Bars ensure highest quality and persistence. Most of the H&R Anti-Roll Bars have a muiltihole end to adjust the self-steering behavior (over-/understeering) of the vehicle. Reduces body roll and increases agility with a minimal loss of comfort. Compatible with all OEM and sport suspension systems.Product characteristics:High-tensile steelPrecise forged endsPowder coatingComposite rubber bearingOver-/understeering adjustableLess body rollHigher agilityMinimal loss of comfortMade in GermanyDelivered with TÜV approval or ABE:Porsche 911 C4 Type 991 4WD Carrera and Carrera S including Cabrio 2012-
H&R Set of Anti-Roll Bars Porsche 911 C4 4WD Carrera 4/4S/911 Turbo 1998- FA25/RA24mm
H&R Set of Anti-Roll Bars Porsche 911 C4 4WD Carrera 4/4S/911 Turbo 1998- FA25/RA24mmMade of high-tensile steel with precise forged ends, powder coating and composite rubber bearing H&R Anti-Roll Bars ensure highest quality and persistence. Most of the H&R Anti-Roll Bars have a muiltihole end to adjust the self-steering behavior (over-/understeering) of the vehicle. Reduces body roll and increases agility with a minimal loss of comfort. Compatible with all OEM and sport suspension systems.Product characteristics:High-tensile steelPrecise forged endsPowder coatingComposite rubber bearingOver-/understeering adjustableLess body rollHigher agilityMinimal loss of comfortMade in GermanyDelivered with TÜV approval or ABE:Porsche 911 C4 Type 996 4WD Carrera 4/4S, 911 Turbo including Convertible 1998- Front axle 25mm/Rear axle 24mm
H&R Set of Anti-Roll Bars Porsche 911 C4 4WD/Turbo PDK 2005- FA26/RA24mm
H&R Set of Anti-Roll Bars Porsche 911 C4 4WD/Turbo PDK 2005- FA26/RA24mmMade of high-tensile steel with precise forged ends, powder coating and composite rubber bearing H&R Anti-Roll Bars ensure highest quality and persistence. Most of the H&R Anti-Roll Bars have a muiltihole end to adjust the self-steering behavior (over-/understeering) of the vehicle. Reduces body roll and increases agility with a minimal loss of comfort. Compatible with all OEM and sport suspension systems.Product characteristics:High-tensile steelPrecise forged endsPowder coatingComposite rubber bearingOver-/understeering adjustableLess body rollHigher agilityMinimal loss of comfortMade in GermanyDelivered with TÜV approval or ABE:Porsche 911 C4 Type 997 4WD Carrera (S) including Facelift model 2008, only PDK 2005- Front axle 26mm/Rear axle 24mmPorsche 911 Turbo Type 997 Turbo, only PDK 2005- Front axle 26mm/Rear axle 24mm
H&R Set of Anti-Roll Bars Porsche 911 Turbo 2006- - 26/24mm
H&R Set of Anti-Roll Bars Porsche 911 Turbo 2006- - 26/24mmMade of high-tensile steel with precise forged ends, powder coating and composite rubber bearing H&R Anti-Roll Bars ensure highest quality and persistence. Most of the H&R Anti-Roll Bars have a muiltihole end to adjust the self-steering behavior (over-/understeering) of the vehicle. Reduces body roll and increases agility with a minimal loss of comfort. Compatible with all OEM and sport suspension systems.Product characteristics:High-tensile steelPrecise forged endsPowder coatingComposite rubber bearingOver-/understeering adjustableLess body rollHigher agilityMinimal loss of comfortMade in GermanyDelivered with TÜV approval or ABE:Porsche 911 Turbo Type 997 Turbo without PDK 2006-
H&R Set of Anti-Roll Bars Porsche Boxster (S) 1996- FA28/RA24mm
H&R Set of Anti-Roll Bars Porsche Boxster (S) 1996- FA28/RA24mmMade of high-tensile steel with precise forged ends, powder coating and composite rubber bearing H&R Anti-Roll Bars ensure highest quality and persistence. Most of the H&R Anti-Roll Bars have a muiltihole end to adjust the self-steering behavior (over-/understeering) of the vehicle. Reduces body roll and increases agility with a minimal loss of comfort. Compatible with all OEM and sport suspension systems.Product characteristics:High-tensile steelPrecise forged endsPowder coatingComposite rubber bearingOver-/understeering adjustableLess body rollHigher agilityMinimal loss of comfortMade in GermanyDelivered with TÜV approval or ABE:Porsche Boxster (S) Type 986 1996- Front axle 26mm/Rear axle 22mm
H&R Set of Anti-Roll Bars Porsche Boxster Spyder 2009- FA28/RA24mm
H&R Set of Anti-Roll Bars Porsche Boxster Spyder 2009- FA28/RA24mmMade of high-tensile steel with precise forged ends, powder coating and composite rubber bearing H&R Anti-Roll Bars ensure highest quality and persistence. Most of the H&R Anti-Roll Bars have a muiltihole end to adjust the self-steering behavior (over-/understeering) of the vehicle. Reduces body roll and increases agility with a minimal loss of comfort. Compatible with all OEM and sport suspension systems.Product characteristics:High-tensile steelPrecise forged endsPowder coatingComposite rubber bearingOver-/understeering adjustableLess body rollHigher agilityMinimal loss of comfortMade in GermanyDelivered with TÜV approval or ABE:Porsche Boxster Spyder Type 987 2009- Front axle 26mm/Rear axle 22mm
H&R Set of Anti-Roll Bars Porsche Boxster/S 2004- & Cayman/S 2005- - 24/22mm
H&R Set of Anti-Roll Bars Porsche Boxster/S 2004- & Cayman/S 2005- - 24/22mmMade of high-tensile steel with precise forged ends, powder coating and composite rubber bearing H&R Anti-Roll Bars ensure highest quality and persistence. Most of the H&R Anti-Roll Bars have a muiltihole end to adjust the self-steering behavior (over-/understeering) of the vehicle. Reduces body roll and increases agility with a minimal loss of comfort. Compatible with all OEM and sport suspension systems.Product characteristics:High-tensile steelPrecise forged endsPowder coatingComposite rubber bearingOver-/understeering adjustableLess body rollHigher agilityMinimal loss of comfortMade in GermanyDelivered with TÜV approval or ABE:Porsche Boxster and Boxster S Type 987 2004-Porsche Cayman and Cayman S Type 987 2005-
H&R Set of Anti-Roll Bars Porsche Boxster/S 2012- & Cayman/S 2012- 28/24mm
H&R Set of Anti-Roll Bars Porsche Boxster/S 2012- & Cayman/S 2012- 28/24mmMade of high-tensile steel with precise forged ends, powder coating and composite rubber bearing H&R Anti-Roll Bars ensure highest quality and persistence. Most of the H&R Anti-Roll Bars have a muiltihole end to adjust the self-steering behavior (over-/understeering) of the vehicle. Reduces body roll and increases agility with a minimal loss of comfort. Compatible with all OEM and sport suspension systems.Product characteristics:High-tensile steelPrecise forged endsPowder coatingComposite rubber bearingOver-/understeering adjustableLess body rollHigher agilityMinimal loss of comfortMade in GermanyDelivered with TÜV approval or ABE:Porsche Boxster and Boxster S Type 981 2012-Porsche Cayman and Cayman S Type 981 2012-
H&R Set of Anti-Roll Bars Seat Ibiza & Volkswagen Polo GTI/WRC - 2WD - 2008- - 22/25mm
H&R Set of Anti-Roll Bars Seat Ibiza & Volkswagen Polo GTI/WRC - 2WD - 2008- - 22/25mmMade of high-tensile steel with precise forged ends, powder coating and composite rubber bearing H&R Anti-Roll Bars ensure highest quality and persistence. Most of the H&R Anti-Roll Bars have a muiltihole end to adjust the self-steering behavior (over-/understeering) of the vehicle. Reduces body roll and increases agility with a minimal loss of comfort. Compatible with all OEM and sport suspension systems.Product characteristics:High-tensile steelPrecise forged endsPowder coatingComposite rubber bearingOver-/understeering adjustableLess body rollHigher agilityMinimal loss of comfortMade in GermanyDelivered with TÜV approval or ABE:Seat Ibiza including ST and Sportcoupé Type 6J 2WD 2008-Volkswagen Polo GTI/WRC Type 6R 2WD only GTI and WRC 2008-
H&R Set of Anti-Roll Bars Seat Ibiza/Cordoba & Skoda Fabia & Volkswagen Fox/Polo - 2001- 22/25mm - Incl. 2 Sway-bars
H&R Set of Anti-Roll Bars Seat Ibiza/Cordoba & Skoda Fabia & Volkswagen Fox/Polo - 2001- 22/25mm - Incl. 2 Sway-barsMade of high-tensile steel with precise forged ends, powder coating and composite rubber bearing H&R Anti-Roll Bars ensure highest quality and persistence. Most of the H&R Anti-Roll Bars have a muiltihole end to adjust the self-steering behavior (over-/understeering) of the vehicle. Reduces body roll and increases agility with a minimal loss of comfort. Compatible with all OEM and sport suspension systems.Product characteristics:High-tensile steelPrecise forged endsPowder coatingComposite rubber bearingOver-/understeering adjustableLess body rollHigher agilityMinimal loss of comfortMade in GermanyDelivered with TÜV approval or ABE:Seat Ibiza/Cordoba including Cupra + FR Type 6J for cars with a big/square-cut muffler 2001-Seat Ibiza including Cupra + FR Type 6Y for cars with a big/square-cut muffler 2001-Seat Ibiza Type 6J for cars with a big/square-cut muffler 2001-Skoda Fabia including Combi including RS Type 6Y 2001-Skoda Fabia including Combi including RS Type 5J for cars with a big/square-cut muffler 2001-Volkswagen FOX Type 5Z for cars with a big/square-cut muffler 2001-Volkswagen Polo including GTI Type 9N 2001-Set including 2 sway-bar-links for coil-over 29325-2 (HR 293252)
H&R Set of Anti-Roll Bars Seat Ibiza/Cordoba & Skoda Fabia & Volkswagen Polo - 2001- - 22/25mm
H&R Set of Anti-Roll Bars Seat Ibiza/Cordoba & Skoda Fabia & Volkswagen Polo - 2001- - 22/25mmMade of high-tensile steel with precise forged ends, powder coating and composite rubber bearing H&R Anti-Roll Bars ensure highest quality and persistence. Most of the H&R Anti-Roll Bars have a muiltihole end to adjust the self-steering behavior (over-/understeering) of the vehicle. Reduces body roll and increases agility with a minimal loss of comfort. Compatible with all OEM and sport suspension systems.Product characteristics:High-tensile steelPrecise forged endsPowder coatingComposite rubber bearingOver-/understeering adjustableLess body rollHigher agilityMinimal loss of comfortMade in GermanyDelivered with TÜV approval or ABE:Seat Ibiza/Cordoba including Cupra + FR Type 6J 2001-Skoda Fabia including Combi including RS Type 5J 2001-Volkswagen Polo Type 9N 2001-
H&R Set of Anti-Roll Bars Seat Ibiza/Cordoba & Skoda Fabia & Volkswagen Polo - 2001- - 22/25mm - incl 2 Sway-bars
H&R Set of Anti-Roll Bars Seat Ibiza/Cordoba & Skoda Fabia & Volkswagen Polo - 2001- - 22/25mm - incl 2 Sway-barsMade of high-tensile steel with precise forged ends, powder coating and composite rubber bearing H&R Anti-Roll Bars ensure highest quality and persistence. Most of the H&R Anti-Roll Bars have a muiltihole end to adjust the self-steering behavior (over-/understeering) of the vehicle. Reduces body roll and increases agility with a minimal loss of comfort. Compatible with all OEM and sport suspension systems.Product characteristics:High-tensile steelPrecise forged endsPowder coatingComposite rubber bearingOver-/understeering adjustableLess body rollHigher agilityMinimal loss of comfortMade in GermanyDelivered with TÜV approval or ABE:Seat Ibiza/Cordoba including Cupra + FR Type 6J 2001-Skoda Fabia including Combi including RS Type 5J 2001-Volkswagen Polo Type 9N 2001-
H&R Set of Anti-Roll Bars Seat Leon Cupra - 2WD - 2004- - 28/24mm
H&R Set of Anti-Roll Bars Seat Leon Cupra - 2WD - 2004- - 28/24mmMade of high-tensile steel with precise forged ends, powder coating and composite rubber bearing H&R Anti-Roll Bars ensure highest quality and persistence. Most of the H&R Anti-Roll Bars have a muiltihole end to adjust the self-steering behavior (over-/understeering) of the vehicle. Reduces body roll and increases agility with a minimal loss of comfort. Compatible with all OEM and sport suspension systems.Product characteristics:High-tensile steelPrecise forged endsPowder coatingComposite rubber bearingOver-/understeering adjustableLess body rollHigher agilityMinimal loss of comfortMade in GermanyDelivered with TÜV approval or ABE:Seat Leon Type 1P/1PN 2WD only for Seat Leon Cupra, without TUV approval
H&R Set of Anti-Roll Bars Seat Toledo/Volkswagen Corrado/Golf II/Golf III/Jetta II/Vento FA22/RA25mm
H&R Set of Anti-Roll Bars Seat Toledo/Volkswagen Corrado/Golf II/Golf III/Jetta II/Vento FA22/RA25mmMade of high-tensile steel with precise forged ends, powder coating and composite rubber bearing H&R Anti-Roll Bars ensure highest quality and persistence. Most of the H&R Anti-Roll Bars have a muiltihole end to adjust the self-steering behavior (over-/understeering) of the vehicle. Reduces body roll and increases agility with a minimal loss of comfort. Compatible with all OEM and sport suspension systems.Product characteristics:High-tensile steelPrecise forged endsPowder coatingComposite rubber bearingOver-/understeering adjustableLess body rollHigher agilityMinimal loss of comfortMade in GermanyDelivered with TÜV approval or ABE:Seat Toledo Type 1L 1991-Volkswagen Corrado Type 53i exclusive VR6 1988-Volkswagen Golf II Type 19E 1983-Volkswagen Golf III Sedan/Convertible Type 1HXO/1H/1EXO/1E, only 4-hole-wheels, exclusive GTI-TDI (110PS)/GTI/16V+VR6, including TDI 1991-Volkswagen Jetta II Type 19E 1983-Volkswagen Vento Sedan Type 1HXO/1H only 4-hole-wheels, exclusive GTI-TDI (110PS)/GTI/16V+VR6, including TDI 1991-Front axle 22mm/Rear axle 25mm.
H&R Set of Anti-Roll Bars Seat Toledo/Volkswagen Corrado/Golf II/Golf III/Jetta II/Vento FA25/RA28mm
H&R Set of Anti-Roll Bars Seat Toledo/Volkswagen Corrado/Golf II/Golf III/Jetta II/Vento FA25/RA28mmMade of high-tensile steel with precise forged ends, powder coating and composite rubber bearing H&R Anti-Roll Bars ensure highest quality and persistence. Most of the H&R Anti-Roll Bars have a muiltihole end to adjust the self-steering behavior (over-/understeering) of the vehicle. Reduces body roll and increases agility with a minimal loss of comfort. Compatible with all OEM and sport suspension systems.Product characteristics:High-tensile steelPrecise forged endsPowder coatingComposite rubber bearingOver-/understeering adjustableLess body rollHigher agilityMinimal loss of comfortMade in GermanyDelivered with TÜV approval or ABE:Seat Toledo Type 1L 1991-Volkswagen Corrado Type 53i, exclusive VR6 1988-Volkswagen Golf II Type 19E 1983-Volkswagen Golf III Sedan/Convertible Type 1HXO/1H/1EXO/1E, only 4-hole-wheels, exclusive GTI/TDI (110 PS)/GTI/16V+VR6, including TDI 1991-Volkswagen Jetta II Type 19E 1983-Volkswagen Vento Sedan Type 1HXO/1H, only 4-hole-wheels, exclusive GTI-TDI (110 PS)/GTI/16V+VR6, including TDI 1991-Front axle 25mm/Rear axle 28mm.Allowed only in combination with coil-over.
H&R Set of Anti-Roll Bars Skoda Superb/ Volkswagen Passat/Touran/Tiguan & Skoda Kodiaq 2017- & Cupra Formentor incl. VZ (KM) 2020- - 2WD FA27/RA26mm
H&R Set of Anti-Roll Bars Skoda Superb/ Volkswagen Passat /Touran/Tiguan & Skoda Kodiaq 2017- & Cupra Formentor incl. VZ (KM) 2020- - 2WD FA27/RA26mmMade of high-tensile steel with precise forged ends, powder coating and composite rubber bearing H&R Anti-Roll Bars ensure highest quality and persistence. Most of the H&R Anti-Roll Bars have a muiltihole end to adjust the self-steering behavior (over-/understeering) of the vehicle. Reduces body roll and increases agility with a minimal loss of comfort. Compatible with all OEM and sport suspension systems. Product characteristics:High-tensile steelPrecise forged endsPowder coatingComposite rubber bearingOver-/understeering adjustableLess body rollHigher agilityMinimal loss of comfortMade in GermanyDelivered with TÜV approval or ABE :Skoda Superb Sedan Type 3T/3V 2WD 2015-Skoda Superb Combi Type 3T/3V 2WD 2015-Volkswagen Passat Sedan Type 3C 2WD 2014-Volkswagen Passat Variant Type 3C 2WD 2014-Volkswagen Touran Type 1T 2WD 2015-Volkswagen Tiguan Type 5N 2WD 2016Cupra Formentor Type KM 2WD, incl. VZ, 2020-Skoda Kodiaq Type NS 2WD 2017-Front axle 27mm / Rear axle 26mm
H&R Set of Anti-Roll Bars Skoda Superb/ Volkswagen Passat/Touran/Tiguan 2014- & Skoda Kodiaq 2017- & Cupra Formentor incl. VZ (KM) 2020- - 2WD FA27/RA24mm
H&R Set of Anti-Roll Bars Skoda Superb/ Volkswagen Passat/Touran/Tiguan 2014- & Skoda Kodiaq 2017- & Cupra Formentor incl. VZ (KM) 2020- - 2WD FA27/RA24mmMade of high-tensile steel with precise forged ends, powder coating and composite rubber bearing H&R Anti-Roll Bars ensure highest quality and persistence. Most of the H&R Anti-Roll Bars have a muiltihole end to adjust the self-steering behavior (over-/understeering) of the vehicle. Reduces body roll and increases agility with a minimal loss of comfort. Compatible with all OEM and sport suspension systems. Product characteristics:High-tensile steelPrecise forged endsPowder coatingComposite rubber bearingOver-/understeering adjustableLess body rollHigher agilityMinimal loss of comfortMade in GermanyDelivered with TÜV approval or ABE :Skoda Superb Sedan Type 3T/3V 2WD 2015-Skoda Superb Combi Type 3T/3V 2WD 2015-Volkswagen Passat Sedan Type 3C 2WD 2014-Volkswagen Passat Variant Type 3C 2WD 2014-Volkswagen Touran Type 1T 2WD 2015-Volkswagen Tiguan Type 5N 2WD 2016Cupra Formentor Type KM 2WD, incl. VZ, 2020-Skoda Kodiaq Type NS 2WD 2017-Front axle 27mm / Rear axle 24mm
H&R Set of Anti-Roll Bars Subaru BRZ (ZD8) & Toyota GR 86 (ZN8) 2021- - 22/18mm
H&R Set of Anti-Roll Bars Subaru BRZ (ZD8) & Toyota GR 86 (ZN8) 2021- - 22/18mmMade of high-tensile steel with precise forged ends, powder coating and composite rubber bearing H&R Anti-Roll Bars ensure highest quality and persistence. Most of the H&R Anti-Roll Bars have a muiltihole end to adjust the self-steering behavior (over-/understeering) of the vehicle. Reduces body roll and increases agility with a minimal loss of comfort. Compatible with all OEM and sport suspension systems. Product characteristics:High-tensile steelPrecise forged endsPowder coatingComposite rubber bearingOver-/understeering adjustableLess body rollHigher agilityMinimal loss of comfortMade in GermanyDelivered with TÜV approval or ABE :Subaru BRZ type ZD8, 2.4L, 2021-, Front axle 22mm / Rear axle 18mmToyota GR 86 type ZN8, 2.4L, 2021-, Front axle 22mm / Rear axle 18mm
H&R Set of Anti-Roll Bars Subaru Impreza GT 1996-2000 - 22/25mm
H&R Set of Anti-Roll Bars Subaru Impreza GT 1996-2000 - 22/25mmMade of high-tensile steel with precise forged ends, powder coating and composite rubber bearing H&R Anti-Roll Bars ensure highest quality and persistence. Most of the H&R Anti-Roll Bars have a muiltihole end to adjust the self-steering behavior (over-/understeering) of the vehicle. Reduces body roll and increases agility with a minimal loss of comfort. Compatible with all OEM and sport suspension systems.Product characteristics:High-tensile steelPrecise forged endsPowder coatingComposite rubber bearingOver-/understeering adjustableLess body rollHigher agilityMinimal loss of comfortMade in GermanyDelivered with TÜV approval or ABE:Subaru Impreza GT Type GFC/GC/GF 1996-2000
H&R Set of Anti-Roll Bars Subaru Impreza WRX/WRX STI 2001- FA22/RA25mm
H&R Set of Anti-Roll Bars Subaru Impreza WRX/WRX STI 2001- FA22/RA25mmMade of high-tensile steel with precise forged ends, powder coating and composite rubber bearing H&R Anti-Roll Bars ensure highest quality and persistence. Most of the H&R Anti-Roll Bars have a muiltihole end to adjust the self-steering behavior (over-/understeering) of the vehicle. Reduces body roll and increases agility with a minimal loss of comfort. Compatible with all OEM and sport suspension systems.Product characteristics:High-tensile steelPrecise forged endsPowder coatingComposite rubber bearingOver-/understeering adjustableLess body rollHigher agilityMinimal loss of comfortMade in GermanyDelivered with TÜV approval or ABE:Subaru Impreza WRX Type GG/GD/GGS, only for cars with plastic-sway bar link on rear axle 2001- Front axle 22mm/Rear axle 25mmSubaru Impreza WRX STI Type GG/GD/GGS, only for cars with plastic-sway bar link on rear axle, up to model 2001-2004 Front axle 22mm/Rear axle 25mm
H&R Set of Anti-Roll Bars Subaru Impreza WRX/WRX STI 2004- FA22/RA25mm
H&R Set of Anti-Roll Bars Subaru Impreza WRX/WRX STI 2004- FA22/RA25mmMade of high-tensile steel with precise forged ends, powder coating and composite rubber bearing H&R Anti-Roll Bars ensure highest quality and persistence. Most of the H&R Anti-Roll Bars have a muiltihole end to adjust the self-steering behavior (over-/understeering) of the vehicle. Reduces body roll and increases agility with a minimal loss of comfort. Compatible with all OEM and sport suspension systems.Product characteristics:High-tensile steelPrecise forged endsPowder coatingComposite rubber bearingOver-/understeering adjustableLess body rollHigher agilityMinimal loss of comfortMade in GermanyDelivered with TÜV approval or ABE:Subaru Impreza WRX/WRX STI Type GG/GD/GGS, only for cars with steel-sway bar link on rear axle 2004- Front axle 22mm/Rear axle 25mm
H&R Set of Anti-Roll Bars Volkswagen Bus T5 2003-/T6 2015- - 2/4WD - 26/30mm
H&R Set of Anti-Roll Bars Volkswagen Bus T5 2003-/T6 2015- - 2/4WD - 26/30mmMade of high-tensile steel with precise forged ends, powder coating and composite rubber bearing H&R Anti-Roll Bars ensure highest quality and persistence. Most of the H&R Anti-Roll Bars have a muiltihole end to adjust the self-steering behavior (over-/understeering) of the vehicle. Reduces body roll and increases agility with a minimal loss of comfort. Compatible with all OEM and sport suspension systems.Product characteristics:High-tensile steelPrecise forged endsPowder coatingComposite rubber bearingOver-/understeering adjustableLess body rollHigher agilityMinimal loss of comfortMade in GermanyDelivered with TÜV approval or ABE:Volkswagen Bus T5 including Facelift Type 7HM/7HMA/7HC/7HCA/7HKX0/7HK/7J0 2/4WD, not for Xenon 2003-Volkswagen Bus T6 Type 7HMA/7HC/7J0 2/4WD except adaptive suspension system, except dynamic/sport/bad road suspension, except Xenon 2015-
H&R Set of Anti-Roll Bars Volkswagen Bus T5/T6 2003- - 2/4WD - 26/30mm - Alleen voor Xenon/LED
H&R Set of Anti-Roll Bars Volkswagen Bus T5/T6 2003- - 2/4WD - 26/30mm - Alleen voor Xenon/LEDMade of high-tensile steel with precise forged ends, powder coating and composite rubber bearing H&R Anti-Roll Bars ensure highest quality and persistence. Most of the H&R Anti-Roll Bars have a muiltihole end to adjust the self-steering behavior (over-/understeering) of the vehicle. Reduces body roll and increases agility with a minimal loss of comfort. Compatible with all OEM and sport suspension systems.Product characteristics:High-tensile steelPrecise forged endsPowder coatingComposite rubber bearingOver-/understeering adjustableLess body rollHigher agilityMinimal loss of comfortMade in GermanyDelivered with TÜV approval or ABE:Volkswagen Bus T5 including Facelift Type 7HM/7HMA/7HC/7HCA/7HKX0/7HK/7J0 2/4WD, only for Xenon 2003-Volkswagen Bus T6 Type 7HMA/7HC/7J0 2/4WD except adaptive suspension system, except dynamic/sport/bad road suspension, with Xenon 2003-
H&R Set of Anti-Roll Bars Volkswagen Corrado VR6/Golf III/Vento GTI-TDI/GTI 16V+VR6 1991- FA25/RA25mm
H&R Set of Anti-Roll Bars Volkswagen Corrado VR6/Golf III/Vento GTI-TDI/GTI 16V+VR6 1991- FA25/RA25mmMade of high-tensile steel with precise forged ends, powder coating and composite rubber bearing H&R Anti-Roll Bars ensure highest quality and persistence. Most of the H&R Anti-Roll Bars have a muiltihole end to adjust the self-steering behavior (over-/understeering) of the vehicle. Reduces body roll and increases agility with a minimal loss of comfort. Compatible with all OEM and sport suspension systems.Product characteristics:High-tensile steelPrecise forged endsPowder coatingComposite rubber bearingOver-/understeering adjustableLess body rollHigher agilityMinimal loss of comfortMade in GermanyDelivered with TÜV approval or ABE:Volkswagen Corrado VR6 Type 53i, only VR6 1991-Volkswagen Golf III Sedan/Convertible Type 1HXO/1H/1EXO/1E, only GTI-TDI (110 PS)/GTI 16V+VR6, only 5-hole-wheels 1991-Volkswagen Vento Sedan Type 1HXO/1H, only GTI-TDI (110 PS)/GTI/16V+VR6, only 5-hole-wheels 1991-Front axle 25mm/Rear axle 25mm.