Sports air filters ensure a better air flow. With a Sport Air filter, power and acceleration can be increased. A Sport Air filter also lasts longer than a standard air filter. A Sport Air Filter in many cases more than 1,000,000 km.
Brands like K&N and Green even give this guarantee. We supply these K&N Filters and Green Filters as replacement filters but also as Air intake kits. We also supply Sport Air Filters of the brands Pipercross, Injen and FK.
If you can not find certain items in our webshop, ask one of our employees.
K&N Aircharger Kit Cadillac ATS-V 3.6L V6 2016-2017 (57-3093)
K&N Aircharger Kit Cadillac ATS-V 3.6L V6 2016-2017 (57-3093) The K&N AirCharger air intake system replaces the restrictive factory air filter and air intake housing. K&N air intakes are designed to dramatically reduce air intake restriction as well as smooth and straighten air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine's RPM range. The air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the original air box space. Air is directed through an aerodynamically engineered intake tube into the engine's throttle body for a guaranteed power gain. The tube accommodates the factory crank case vent hose and air inlet temperature sensor as well as the blow off valve. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install, usually in 90 minutes or less using your vehicle's existing factory mounting points. The tools needed are a screwdriver, ratchet set and an Allen wrench. This air intake cannot be sold in California. It is not legal for use in California or other states adopting California emission standards. - Guaranteed horsepower gain - Designed to improve throttle response and engine sound - Free-flowing high density polyethylene tube - Replaces entire factory air intake system - K&N Million Mile Limited Warranty - Lasts up to 100,000 miles before service is required (depending on driving conditions) - Easy to install, usually in 90 minutes or less
K&N Aircharger Kit Cadillac CT5-V (Blackwing) 6.2L V8 2022-2024 (63-3121)
K&N Aircharger Kit Cadillac CT5-V (Blackwing) 6.2L V8 2022-2024 (63-3121) The K&N AirCharger air intake system replaces the restrictive factory air filter and air intake housing. K&N air intakes are designed to dramatically reduce air intake restriction as well as smooth and straighten air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engines RPM range. The air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the original air box space. Air is directed through an aerodynamically engineered intake tube into the engines throttle body for a guaranteed power gain. The tube accommodates the factory crank case vent hose and air inlet temperature sensor as well as the blow off valve. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install, usually in 90 minutes or less using your vehicles existing factory mounting points. The tools needed are a screwdriver, ratchet set and an Allen wrench. This air intake cannot be sold in California. It is not legal for use in California or other states adopting California emission standards. - Guaranteed horsepower gain - Designed to improve throttle response and engine sound - Free-flowing high density polyethylene tube - Replaces entire factory air intake system - K&N Million Mile Limited Warranty - Lasts up to 100,000 miles before service is required (depending on driving conditions) - Easy to install, usually in 90 minutes or less
K&N Aircharger Kit Chevrolet Camaro 3.6L V6 2010 (63-3075)
K&N Aircharger Kit Chevrolet Camaro 3.6L-V6, 2010 The K&N AirCharger air intake system replaces the restrictive factory air filter and air intake housing. K&N air intakes are designed to dramatically reduce air intake restriction as well as smooth and straighten air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engines RPM range. The air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the original air box space. Air is directed through an aerodynamically engineered intake tube into the engines throttle body for a guaranteed power gain. The tube accommodates the factory crank case vent hose and air inlet temperature sensor as well as the blow off valve. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install, usually in 90 minutes or less using your vehicles existing factory mounting points. The tools needed are a screwdriver, ratchet set and an Allen wrench. This air intake cannot be sold in California. It is not legal for use in California or other states adopting California emission standards. - Guaranteed horsepower gain - Designed to improve throttle response and engine sound - Free-flowing high density polyethylene tube - Replaces entire factory air intake system - K&N Million Mile Limited Warranty - Lasts up to 100,000 miles before service is required (depending on driving conditions) - Easy to install, usually in 90 minutes or less
K&N Aircharger Kit Chevrolet Camaro 3.6L V6 2011-2015 (63-3078)
K&N Aircharger Kit Chevrolet Camaro 3.6L V6 2011-2015 The K&N AirCharger air intake system replaces the restrictive factory air filter and air intake housing. K&N air intakes are designed to dramatically reduce air intake restriction as well as smooth and straighten air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engines RPM range. The air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the original air box space. Air is directed through an aerodynamically engineered intake tube into the engines throttle body for a guaranteed power gain. The tube accommodates the factory crank case vent hose and air inlet temperature sensor as well as the blow off valve. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install, usually in 90 minutes or less using your vehicles existing factory mounting points. The tools needed are a screwdriver, ratchet set and an Allen wrench. This air intake cannot be sold in California. It is not legal for use in California or other states adopting California emission standards. - Guaranteed horsepower gain - Designed to improve throttle response and engine sound - Free-flowing high density polyethylene tube - Replaces entire factory air intake system - K&N Million Mile Limited Warranty - Lasts up to 100,000 miles before service is required (depending on driving conditions) - Easy to install, usually in 90 minutes or less
K&N Aircharger Kit Chevrolet Camaro SS 6.2L V8 2010-2015 (63-3074)
K&N Aircharger Kit Chevrolet Camaro SS 6.2L-V8, 2010-2015 The K&N AirCharger air intake system replaces the restrictive factory air filter and air intake housing. K&N air intakes are designed to dramatically reduce air intake restriction as well as smooth and straighten air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engines RPM range. The air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the original air box space. Air is directed through an aerodynamically engineered intake tube into the engines throttle body for a guaranteed power gain. The tube accommodates the factory crank case vent hose and air inlet temperature sensor as well as the blow off valve. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install, usually in 90 minutes or less using your vehicles existing factory mounting points. The tools needed are a screwdriver, ratchet set and an Allen wrench. This air intake cannot be sold in California. It is not legal for use in California or other states adopting California emission standards. - Guaranteed horsepower gain - Designed to improve throttle response and engine sound - Free-flowing high density polyethylene tube - Replaces entire factory air intake system - K&N Million Mile Limited Warranty - Lasts up to 100,000 miles before service is required (depending on driving conditions) - Easy to install, usually in 90 minutes or less
K&N Aircharger Kit Chevrolet Camaro ZL1 6.2L V8 2012-2014 (63-3079)
K&N Aircharger Kit Chevrolet Camaro ZL1 6.2L-V8, 2012-2014 The K&N AirCharger air intake system replaces the restrictive factory air filter and air intake housing. K&N air intakes are designed to dramatically reduce air intake restriction as well as smooth and straighten air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engines RPM range. The air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the original air box space. Air is directed through an aerodynamically engineered intake tube into the engines throttle body for a guaranteed power gain. The tube accommodates the factory crank case vent hose and air inlet temperature sensor as well as the blow off valve. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install, usually in 90 minutes or less using your vehicles existing factory mounting points. The tools needed are a screwdriver, ratchet set and an Allen wrench. This air intake cannot be sold in California. It is not legal for use in California or other states adopting California emission standards. - Guaranteed horsepower gain - Designed to improve throttle response and engine sound - Free-flowing high density polyethylene tube - Replaces entire factory air intake system - K&N Million Mile Limited Warranty - Lasts up to 100,000 miles before service is required (depending on driving conditions) - Easy to install, usually in 90 minutes or less
K&N Aircharger Kit Chevrolet Colorado & GMC Canyon 2.7L L4 2023-2024 (63-3122)
K&N Aircharger Kit Chevrolet Colorado & GMC Canyon 2.7L L4 2023-2024 (63-3122) The K&N AirCharger air intake system replaces the restrictive factory air filter and air intake housing. K&N air intakes are designed to dramatically reduce air intake restriction as well as smooth and straighten air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engines RPM range. The air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the original air box space. Air is directed through an aerodynamically engineered intake tube into the engines throttle body for a guaranteed power gain. The tube accommodates the factory crank case vent hose and air inlet temperature sensor as well as the blow off valve. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install, usually in 90 minutes or less using your vehicles existing factory mounting points. The tools needed are a screwdriver, ratchet set and an Allen wrench. This air intake cannot be sold in California. It is not legal for use in California or other states adopting California emission standards. - Guaranteed horsepower gain - Designed to improve throttle response and engine sound - Free-flowing high density polyethylene tube - Replaces entire factory air intake system - K&N Million Mile Limited Warranty - Lasts up to 100,000 miles before service is required (depending on driving conditions) - Easy to install, usually in 90 minutes or less
K&N Aircharger Kit Chevrolet Colorado 3.6L V6 2015-2016 (63-3088)
K&N Aircharger Kit Chevrolet Colorado V6-3.6L 2015-2016 The K&N AirCharger air intake system replaces the restrictive factory air filter and air intake housing. K&N air intakes are designed to dramatically reduce air intake restriction as well as smooth and straighten air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engines RPM range. The air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the original air box space. Air is directed through an aerodynamically engineered intake tube into the engines throttle body for a guaranteed power gain. The tube accommodates the factory crank case vent hose and air inlet temperature sensor as well as the blow off valve. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install, usually in 90 minutes or less using your vehicles existing factory mounting points. The tools needed are a screwdriver, ratchet set and an Allen wrench. This air intake cannot be sold in California. It is not legal for use in California or other states adopting California emission standards. - Guaranteed horsepower gain - Designed to improve throttle response and engine sound - Free-flowing high density polyethylene tube - Replaces entire factory air intake system - K&N Million Mile Limited Warranty - Lasts up to 100,000 miles before service is required (depending on driving conditions) - Easy to install, usually in 90 minutes or less
K&N Aircharger Kit Chevrolet Colorado/GMC Canyon 2.5L L4 2015-2016 (63-3089)
The K&N AirCharger air intake system replaces the restrictive factory air filter and air intake housing. K&N air intakes are designed to dramatically reduce air intake restriction as well as smooth and straighten air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engines RPM range. The air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the original air box space. Air is directed through an aerodynamically engineered intake tube into the engines throttle body for a guaranteed power gain. The tube accommodates the factory crank case vent hose and air inlet temperature sensor as well as the blow off valve. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install, usually in 90 minutes or less using your vehicles existing factory mounting points. The tools needed are a screwdriver, ratchet set and an Allen wrench. This air intake cannot be sold in California. It is not legal for use in California or other states adopting California emission standards. - Guaranteed horsepower gain - Designed to improve throttle response and engine sound - Free-flowing high density polyethylene tube - Replaces entire factory air intake system - K&N Million Mile Limited Warranty - Lasts up to 100,000 miles before service is required (depending on driving conditions)
K&N Aircharger Kit Chevrolet Colorado/GMC Canyon 2.9L L4 2009-2012 (63-3064-1)
The K&N AirCharger air intake system replaces the restrictive factory air filter and air intake housing. K&N air intakes are designed to dramatically reduce air intake restriction as well as smooth and straighten air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engines RPM range. The air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the original air box space. Air is directed through an aerodynamically engineered intake tube into the engines throttle body for a guaranteed power gain. The tube accommodates the factory crank case vent hose and air inlet temperature sensor as well as the blow off valve. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install, usually in 90 minutes or less using your vehicles existing factory mounting points. The tools needed are a screwdriver, ratchet set and an Allen wrench. This air intake cannot be sold in California. It is not legal for use in California or other states adopting California emission standards. - Guaranteed horsepower gain - Designed to improve throttle response and engine sound - Free-flowing high density polyethylene tube - Replaces entire factory air intake system - K&N Million Mile Limited Warranty - Lasts up to 100,000 miles before service is required (depending on driving conditions)
K&N Aircharger Kit Chevrolet Colorado/GMC Canyon 3.6L V6 2017-2021 (63-3104)
K&N Aircharger Kit Chevrolet Colorado 3.6 & GMC Canyon 3.6 2017- (63-3104) The K&N AirCharger air intake system replaces the restrictive factory air filter and air intake housing. K&N air intakes are designed to dramatically reduce air intake restriction as well as smooth and straighten air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engines RPM range. The air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the original air box space. Air is directed through an aerodynamically engineered intake tube into the engines throttle body for a guaranteed power gain. The tube accommodates the factory crank case vent hose and air inlet temperature sensor as well as the blow off valve. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install, usually in 90 minutes or less using your vehicles existing factory mounting points. The tools needed are a screwdriver, ratchet set and an Allen wrench. This air intake cannot be sold in California. It is not legal for use in California or other states adopting California emission standards. - Guaranteed horsepower gain - Designed to improve throttle response and engine sound - Free-flowing high density polyethylene tube - Replaces entire factory air intake system - K&N Million Mile Limited Warranty - Lasts up to 100,000 miles before service is required (depending on driving conditions) - Easy to install, usually in 90 minutes or less
K&N Aircharger Kit Chevrolet Colorado/GMC Canyon/Hummer H3 3.7L L5 2007-2012 (63-3065)
The K&N AirCharger air intake system replaces the restrictive factory air filter and air intake housing. K&N air intakes are designed to dramatically reduce air intake restriction as well as smooth and straighten air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engines RPM range. The air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the original air box space. Air is directed through an aerodynamically engineered intake tube into the engines throttle body for a guaranteed power gain. The tube accommodates the factory crank case vent hose and air inlet temperature sensor as well as the blow off valve. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install, usually in 90 minutes or less using your vehicles existing factory mounting points. The tools needed are a screwdriver, ratchet set and an Allen wrench. This air intake cannot be sold in California. It is not legal for use in California or other states adopting California emission standards. - Guaranteed horsepower gain - Designed to improve throttle response and engine sound - Free-flowing high density polyethylene tube - Replaces entire factory air intake system - K&N Million Mile Limited Warranty - Lasts up to 100,000 miles before service is required (depending on driving conditions)
K&N Aircharger Kit Chevrolet Corvette 6.2L V8 2008-2013 (63-3073)
K&N 63 Series AirCharger High Performance Air Intake Kit. A look under the hood of modern cars makes clear that the air flow is restricted by unnecessary bends and kinks. This robs a vehicle of its natural horsepower. Air flows the best in a straight line and is preferably not slowed down by the filter material. The K&N 63 Series Aircharger Kit virtually eliminates the air intake restrictions in the air flow to the engine. The aerodynamically designed tube forces a massive amount of air into the engine, which translates into more power. This kit has the largest conical High- Flow air filter that fits in the engine compartment and still uses the factory holes and mounting points. The filter is isolated from the engine by a thermal shield designed to reduce the temperature of the air taken in by the motor. This provides better performance. The air filter is attached to a rotationally molded tube, braided with High Density Polyethylene. This reduces the turbulence and accelerates the air flow into the engine. With this system, you get the best High-Flow intake system available. With a K&N kit you optimize the air supply to your engine. This ensures better performance and a better engine sound. Because of this feature many people call it a power filter. Benefits of a K&N 63 Series AirCharger High Performance Air Intake Kit.: 1. More power, more torque and better throttle response. 2. The kit includes all needed brackets, hoses and attachments. 3. Water repellent. 4. Washable & reusable. 5. 4 layers of oiled cotton for maximum protection. The oil layer works as a magnet. Dust and dirt is stopped on the outside even though there is 40% more air forced into the engine. 6. 600.000 miles warranty. 7. Only clean every 50.000 to 100.000 miles. 8. The kit features a clear manual. 9. All metal parts are coated for long life. Assembly: You can easily install the K&N AirCharger kit in the car and take it out just as easy. On YouTube you can find numerous instructional videos to assist you. If you still want to have assistance when installing your K&N kit you can always go to your dealer.
K&N Aircharger Kit Chevrolet Corvette 6.2L V8 2014-2019 (63-3081)
K&N Aircharger Kit Chevrolet Corvette V8-6.2 2014-2015 The K&N AirCharger air intake system replaces the restrictive factory air filter and air intake housing. K&N air intakes are designed to dramatically reduce air intake restriction as well as smooth and straighten air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engines RPM range. The air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the original air box space. Air is directed through an aerodynamically engineered intake tube into the engines throttle body for a guaranteed power gain. The tube accommodates the factory crank case vent hose and air inlet temperature sensor as well as the blow off valve. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install, usually in 90 minutes or less using your vehicles existing factory mounting points. The tools needed are a screwdriver, ratchet set and an Allen wrench. This air intake cannot be sold in California. It is not legal for use in California or other states adopting California emission standards. - Guaranteed horsepower gain - Designed to improve throttle response and engine sound - Free-flowing high density polyethylene tube - Replaces entire factory air intake system - K&N Million Mile Limited Warranty - Lasts up to 100,000 miles before service is required (depending on driving conditions) - Easy to install, usually in 90 minutes or less
K&N Aircharger Kit Chevrolet Corvette Stingray V8-6.2L 2020-2021 (63-3120)
K&N Aircharger Kit Chevrolet Corvette Stingray V8-6.2L 2020-2021 (63-3120) The K&N AirCharger air intake system replaces the restrictive factory air filter and air intake housing. K&N air intakes are designed to dramatically reduce air intake restriction as well as smooth and straighten air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engines RPM range. The air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the original air box space. Air is directed through an aerodynamically engineered intake tube into the engines throttle body for a guaranteed power gain. The tube accommodates the factory crank case vent hose and air inlet temperature sensor as well as the blow off valve. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install, usually in 90 minutes or less using your vehicles existing factory mounting points. The tools needed are a screwdriver, ratchet set and an Allen wrench. This air intake cannot be sold in California. It is not legal for use in California or other states adopting California emission standards. - Guaranteed horsepower gain - Designed to improve throttle response and engine sound - Free-flowing high density polyethylene tube - Replaces entire factory air intake system - K&N Million Mile Limited Warranty - Lasts up to 100,000 miles before service is required (depending on driving conditions) - Easy to install, usually in 90 minutes or less
K&N Aircharger Kit Chevrolet Corvette V8-6.0L 2006-2007 (63-3052)
K&N 63 Series AirCharger High Performance Air Intake Kit. A look under the hood of modern cars makes clear that the air flow is restricted by unnecessary bends and kinks. This robs a vehicle of its natural horsepower. Air flows the best in a straight line and is preferably not slowed down by the filter material. The K&N 63 Series Aircharger Kit virtually eliminates the air intake restrictions in the air flow to the engine. The aerodynamically designed tube forces a massive amount of air into the engine, which translates into more power. This kit has the largest conical High- Flow air filter that fits in the engine compartment and still uses the factory holes and mounting points. The filter is isolated from the engine by a thermal shield designed to reduce the temperature of the air taken in by the motor. This provides better performance. The air filter is attached to a rotationally molded tube, braided with High Density Polyethylene. This reduces the turbulence and accelerates the air flow into the engine. With this system, you get the best High-Flow intake system available. With a K&N kit you optimize the air supply to your engine. This ensures better performance and a better engine sound. Because of this feature many people call it a power filter. Benefits of a K&N 63 Series AirCharger High Performance Air Intake Kit.: 1. More power, more torque and better throttle response. 2. The kit includes all needed brackets, hoses and attachments. 3. Water repellent. 4. Washable & reusable. 5. 4 layers of oiled cotton for maximum protection. The oil layer works as a magnet. Dust and dirt is stopped on the outside even though there is 40% more air forced into the engine. 6. 600.000 miles warranty. 7. Only clean every 50.000 to 100.000 miles. 8. The kit features a clear manual. 9. All metal parts are coated for long life. Assembly: You can easily install the K&N AirCharger kit in the car and take it out just as easy. On YouTube you can find numerous instructional videos to assist you. If you still want to have assistance when installing your K&N kit you can always go to your dealer.
K&N Aircharger Kit Chevrolet Corvette Z06 5.7L V8 2001-2004 (63-1050)
K&N Aircharger Kit Chevrolet Corvette Z06 V8-5.7L 2001-2004 The K&N AirCharger air intake system replaces the restrictive factory air filter and air intake housing. K&N air intakes are designed to dramatically reduce air intake restriction as well as smooth and straighten air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engines RPM range. The air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the original air box space. Air is directed through an aerodynamically engineered intake tube into the engines throttle body for a guaranteed power gain. The tube accommodates the factory crank case vent hose and air inlet temperature sensor as well as the blow off valve. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install, usually in 90 minutes or less using your vehicles existing factory mounting points. The tools needed are a screwdriver, ratchet set and an Allen wrench. This air intake cannot be sold in California. It is not legal for use in California or other states adopting California emission standards. - Guaranteed horsepower gain - Designed to improve throttle response and engine sound - Free-flowing high density polyethylene tube - Replaces entire factory air intake system - K&N Million Mile Limited Warranty - Lasts up to 100,000 miles before service is required (depending on driving conditions) - Easy to install, usually in 90 minutes or less
K&N Aircharger Kit Chevrolet Corvette Z06 7.0L V8 2006-2009 (63-30601)
K&N 63 Series AirCharger High Performance Air Intake Kit. A look under the hood of modern cars makes clear that the air flow is restricted by unnecessary bends and kinks. This robs a vehicle of its natural horsepower. Air flows the best in a straight line and is preferably not slowed down by the filter material. The K&N 63 Series Aircharger Kit virtually eliminates the air intake restrictions in the air flow to the engine. The aerodynamically designed tube forces a massive amount of air into the engine, which translates into more power. This kit has the largest conical High- Flow air filter that fits in the engine compartment and still uses the factory holes and mounting points. The filter is isolated from the engine by a thermal shield designed to reduce the temperature of the air taken in by the motor. This provides better performance. The air filter is attached to a rotationally molded tube, braided with High Density Polyethylene. This reduces the turbulence and accelerates the air flow into the engine. With this system, you get the best High-Flow intake system available. With a K&N kit you optimize the air supply to your engine. This ensures better performance and a better engine sound. Because of this feature many people call it a power filter. Benefits of a K&N 63 Series AirCharger High Performance Air Intake Kit.: 1. More power, more torque and better throttle response. 2. The kit includes all needed brackets, hoses and attachments. 3. Water repellent. 4. Washable & reusable. 5. 4 layers of oiled cotton for maximum protection. The oil layer works as a magnet. Dust and dirt is stopped on the outside even though there is 40% more air forced into the engine. 6. 600.000 miles warranty. 7. Only clean every 50.000 to 100.000 miles. 8. The kit features a clear manual. 9. All metal parts are coated for long life. Assembly: You can easily install the K&N AirCharger kit in the car and take it out just as easy. On YouTube you can find numerous instructional videos to assist you. If you still want to have assistance when installing your K&N kit you can always go to your dealer.
K&N Aircharger Kit Chevrolet Corvette ZR1 6.2L SC 2009-2013 (63-3080)
K&N Aircharger Kit Chevrolet Corvette ZR1 6.2L SC 2009-2013 The K&N AirCharger air intake system replaces the restrictive factory air filter and air intake housing. K&N air intakes are designed to dramatically reduce air intake restriction as well as smooth and straighten air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engines RPM range. The air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the original air box space. Air is directed through an aerodynamically engineered intake tube into the engines throttle body for a guaranteed power gain. The tube accommodates the factory crank case vent hose and air inlet temperature sensor as well as the blow off valve. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install, usually in 90 minutes or less using your vehicles existing factory mounting points. The tools needed are a screwdriver, ratchet set and an Allen wrench. This air intake cannot be sold in California. It is not legal for use in California or other states adopting California emission standards. - Guaranteed horsepower gain - Designed to improve throttle response and engine sound - Free-flowing high density polyethylene tube - Replaces entire factory air intake system - K&N Million Mile Limited Warranty - Lasts up to 100,000 miles before service is required (depending on driving conditions) - Easy to install, usually in 90 minutes or less
K&N Aircharger Kit Chevrolet Corvette ZR1 6.2L V8 (excl. Z06) 2019 (57-3111)
K&N Aircharger Kit Chevrolet Corvette ZR1 6.2L V8 (excl. Z06) 2019 (57-3111) The K&N AirCharger air intake system replaces the restrictive factory air filter and air intake housing. K&N air intakes are designed to dramatically reduce air intake restriction as well as smooth and straighten air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine's RPM range. The air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the original air box space. Air is directed through an aerodynamically engineered intake tube into the engine's throttle body for a guaranteed power gain. The tube accommodates the factory crank case vent hose and air inlet temperature sensor as well as the blow off valve. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install, usually in 90 minutes or less using your vehicle's existing factory mounting points. The tools needed are a screwdriver, ratchet set and an Allen wrench. This air intake cannot be sold in California. It is not legal for use in California or other states adopting California emission standards. - Guaranteed horsepower gain - Designed to improve throttle response and engine sound - Free-flowing high density polyethylene tube - Replaces entire factory air intake system - K&N Million Mile Limited Warranty - Lasts up to 100,000 miles before service is required (depending on driving conditions) - Easy to install, usually in 90 minutes or less
K&N Aircharger Kit Chevrolet Impala/Monte Carlo & Pontiac Grand Prix 5.3L V8 2006-2009 (63-3059)
K&N Aircharger Kit Chevrolet Impala SS, Monte Carlo, Grand Prix V8-5.3L 2006-2009 The K&N AirCharger air intake system replaces the restrictive factory air filter and air intake housing. K&N air intakes are designed to dramatically reduce air intake restriction as well as smooth and straighten air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engines RPM range. The air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the original air box space. Air is directed through an aerodynamically engineered intake tube into the engines throttle body for a guaranteed power gain. The tube accommodates the factory crank case vent hose and air inlet temperature sensor as well as the blow off valve. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install, usually in 90 minutes or less using your vehicles existing factory mounting points. The tools needed are a screwdriver, ratchet set and an Allen wrench. This air intake cannot be sold in California. It is not legal for use in California or other states adopting California emission standards. - Guaranteed horsepower gain - Designed to improve throttle response and engine sound - Free-flowing high density polyethylene tube - Replaces entire factory air intake system - K&N Million Mile Limited Warranty - Lasts up to 100,000 miles before service is required (depending on driving conditions) - Easy to install, usually in 90 minutes or less
K&N Aircharger Kit Chevrolet Silverado 1500 & GMC Sierra 1500 3.0 6 Cylinder Diesel 2020-2021 (63-3118)
K&N Aircharger Kit Chevrolet Silverado 1500 & GMC Sierra 1500 3.0 6 Cilinder Diesel 2020-2021 (63-3118) The K&N AirCharger air intake system replaces the restrictive factory air filter and air intake housing. K&N air intakes are designed to dramatically reduce air intake restriction as well as smooth and straighten air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engines RPM range. The air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the original air box space. Air is directed through an aerodynamically engineered intake tube into the engines throttle body for a guaranteed power gain. The tube accommodates the factory crank case vent hose and air inlet temperature sensor as well as the blow off valve. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install, usually in 90 minutes or less using your vehicles existing factory mounting points. The tools needed are a screwdriver, ratchet set and an Allen wrench. This air intake cannot be sold in California. It is not legal for use in California or other states adopting California emission standards. - Guaranteed horsepower gain - Designed to improve throttle response and engine sound - Free-flowing high density polyethylene tube - Replaces entire factory air intake system - K&N Million Mile Limited Warranty - Lasts up to 100,000 miles before service is required (depending on driving conditions) - Easy to install, usually in 90 minutes or less
K&N Aircharger Kit Chevrolet Silverado/GMC Sierra 2500HD/3500HD 6.6L V8 2015-2016 (63-3087)
K&N Aircharger Kit GMC Sierra, 2500/3500HD V8-6.6L 2015 The K&N AirCharger air intake system replaces the restrictive factory air filter and air intake housing. K&N air intakes are designed to dramatically reduce air intake restriction as well as smooth and straighten air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engines RPM range. The air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the original air box space. Air is directed through an aerodynamically engineered intake tube into the engines throttle body for a guaranteed power gain. The tube accommodates the factory crank case vent hose and air inlet temperature sensor as well as the blow off valve. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install, usually in 90 minutes or less using your vehicles existing factory mounting points. The tools needed are a screwdriver, ratchet set and an Allen wrench. This air intake cannot be sold in California. It is not legal for use in California or other states adopting California emission standards. - Guaranteed horsepower gain - Designed to improve throttle response and engine sound - Free-flowing high density polyethylene tube - Replaces entire factory air intake system - K&N Million Mile Limited Warranty - Lasts up to 100,000 miles before service is required (depending on driving conditions) - Easy to install, usually in 90 minutes or less
K&N Aircharger Kit Chevrolet Silverado/GMC Sierra 4.3L V6 2014-2018 (63-3085)
K&N Aircharger Kit Chevrolet/GMC/Silverado / Sierra V6 4.3L 2014 The K&N AirCharger air intake system replaces the restrictive factory air filter and air intake housing. K&N air intakes are designed to dramatically reduce air intake restriction as well as smooth and straighten air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engines RPM range. The air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the original air box space. Air is directed through an aerodynamically engineered intake tube into the engines throttle body for a guaranteed power gain. The tube accommodates the factory crank case vent hose and air inlet temperature sensor as well as the blow off valve. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install, usually in 90 minutes or less using your vehicles existing factory mounting points. The tools needed are a screwdriver, ratchet set and an Allen wrench. This air intake cannot be sold in California. It is not legal for use in California or other states adopting California emission standards. - Guaranteed horsepower gain - Designed to improve throttle response and engine sound - Free-flowing high density polyethylene tube - Replaces entire factory air intake system - K&N Million Mile Limited Warranty - Lasts up to 100,000 miles before service is required (depending on driving conditions) - Easy to install, usually in 90 minutes or less
K&N Aircharger Kit Chevrolet SS 6.2L 2014-2015 & Pontiac G8 6.0L 2008-2009 (63-3071)
K&N Aircharger Kit Pontiac G8 6.0L 2008-2009/Chevrolet SS 6.2L 2014-2015 The K&N AirCharger air intake system replaces the restrictive factory air filter and air intake housing. K&N air intakes are designed to dramatically reduce air intake restriction as well as smooth and straighten air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engines RPM range. The air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the original air box space. Air is directed through an aerodynamically engineered intake tube into the engines throttle body for a guaranteed power gain. The tube accommodates the factory crank case vent hose and air inlet temperature sensor as well as the blow off valve. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install, usually in 90 minutes or less using your vehicles existing factory mounting points. The tools needed are a screwdriver, ratchet set and an Allen wrench. This air intake cannot be sold in California. It is not legal for use in California or other states adopting California emission standards. - Guaranteed horsepower gain - Designed to improve throttle response and engine sound - Free-flowing high density polyethylene tube - Replaces entire factory air intake system - K&N Million Mile Limited Warranty - Lasts up to 100,000 miles before service is required (depending on driving conditions) - Easy to install, usually in 90 minutes or less
K&N Aircharger Kit Chevrolet Trailblazer/GMC Envoy/Isuzu Ascender 4.2L L6 2007-2009 (63-3062)
The K&N AirCharger air intake system replaces the restrictive factory air filter and air intake housing. K&N air intakes are designed to dramatically reduce air intake restriction as well as smooth and straighten air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engines RPM range. The air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the original air box space. Air is directed through an aerodynamically engineered intake tube into the engines throttle body for a guaranteed power gain. The tube accommodates the factory crank case vent hose and air inlet temperature sensor as well as the blow off valve. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install, usually in 90 minutes or less using your vehicles existing factory mounting points. The tools needed are a screwdriver, ratchet set and an Allen wrench. This air intake cannot be sold in California. It is not legal for use in California or other states adopting California emission standards. - Guaranteed horsepower gain - Designed to improve throttle response and engine sound - Free-flowing high density polyethylene tube - Replaces entire factory air intake system - K&N Million Mile Limited Warranty - Lasts up to 100,000 miles before service is required (depending on driving conditions)
K&N Aircharger Kit Chevrolet/GMC 1500 5.3/6.2L V8 2014-2016 (63-3082)
K&N Aircharger Kit Chevrolet/GMC 1500 V8-5.3/6.2L 2014-2016 The K&N AirCharger air intake system replaces the restrictive factory air filter and air intake housing. K&N air intakes are designed to dramatically reduce air intake restriction as well as smooth and straighten air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engines RPM range. The air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the original air box space. Air is directed through an aerodynamically engineered intake tube into the engines throttle body for a guaranteed power gain. The tube accommodates the factory crank case vent hose and air inlet temperature sensor as well as the blow off valve. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install, usually in 90 minutes or less using your vehicles existing factory mounting points. The tools needed are a screwdriver, ratchet set and an Allen wrench. This air intake cannot be sold in California. It is not legal for use in California or other states adopting California emission standards. - Guaranteed horsepower gain - Designed to improve throttle response and engine sound - Free-flowing high density polyethylene tube - Replaces entire factory air intake system - K&N Million Mile Limited Warranty - Lasts up to 100,000 miles before service is required (depending on driving conditions) - Easy to install, usually in 90 minutes or less
K&N Aircharger Kit Chrysler 300 & Dodge Challenger/Charger 3.6L V6 2012-2021 (63-1564)
K&N 63 Series AirCharger High Performance Air Intake Kit. A look under the hood of modern cars makes clear that the air flow is restricted by unnecessary bends and kinks. This robs a vehicle of its natural horsepower. Air flows the best in a straight line and is preferably not slowed down by the filter material. The K&N 63 Series Aircharger Kit virtually eliminates the air intake restrictions in the air flow to the engine. The aerodynamically designed tube forces a massive amount of air into the engine, which translates into more power. This kit has the largest conical High- Flow air filter that fits in the engine compartment and still uses the factory holes and mounting points. The filter is isolated from the engine by a thermal shield designed to reduce the temperature of the air taken in by the motor. This provides better performance. The air filter is attached to a rotationally molded tube, braided with High Density Polyethylene. This reduces the turbulence and accelerates the air flow into the engine. With this system, you get the best High-Flow intake system available. With a K&N kit you optimize the air supply to your engine. This ensures better performance and a better engine sound. Because of this feature many people call it a power filter. Benefits of a K&N 63 Series AirCharger High Performance Air Intake Kit.: 1. More power, more torque and better throttle response. 2. The kit includes all needed brackets, hoses and attachments. 3. Water repellent. 4. Washable & reusable. 5. 4 layers of oiled cotton for maximum protection. The oil layer works as a magnet. Dust and dirt is stopped on the outside even though there is 40% more air forced into the engine. 6. 600.000 miles warranty. 7. Only clean every 50.000 to 100.000 miles. 8. The kit features a clear manual. 9. All metal parts are coated for long life. Assembly: You can easily install the K&N AirCharger kit in the car and take it out just as easy. On YouTube you can find numerous instructional videos to assist you. If you still want to have assistance when installing your K&N kit you can always go to your dealer.
K&N Aircharger Kit Chrysler 300 & Dodge Challenger/Charger 5.7L V8 2011-2019 (63-1114)
K&N 63 Series AirCharger High Performance Air Intake Kit. A look under the hood of modern cars makes clear that the air flow is restricted by unnecessary bends and kinks. This robs a vehicle of its natural horsepower. Air flows the best in a straight line and is preferably not slowed down by the filter material. The K&N 63 Series Aircharger Kit virtually eliminates the air intake restrictions in the air flow to the engine. The aerodynamically designed tube forces a massive amount of air into the engine, which translates into more power. This kit has the largest conical High- Flow air filter that fits in the engine compartment and still uses the factory holes and mounting points. The filter is isolated from the engine by a thermal shield designed to reduce the temperature of the air taken in by the motor. This provides better performance. The air filter is attached to a rotationally molded tube, braided with High Density Polyethylene. This reduces the turbulence and accelerates the air flow into the engine. With this system, you get the best High-Flow intake system available. With a K&N kit you optimize the air supply to your engine. This ensures better performance and a better engine sound. Because of this feature many people call it a power filter. Benefits of a K&N 63 Series AirCharger High Performance Air Intake Kit.: 1. More power, more torque and better throttle response. 2. The kit includes all needed brackets, hoses and attachments. 3. Water repellent. 4. Washable & reusable. 5. 4 layers of oiled cotton for maximum protection. The oil layer works as a magnet. Dust and dirt is stopped on the outside even though there is 40% more air forced into the engine. 6. 600.000 miles warranty. 7. Only clean every 50.000 to 100.000 miles. 8. The kit features a clear manual. 9. All metal parts are coated for long life. Assembly: You can easily install the K&N AirCharger kit in the car and take it out just as easy. On YouTube you can find numerous instructional videos to assist you. If you still want to have assistance when installing your K&N kit you can always go to your dealer.
K&N Aircharger Kit Chrysler 300 & Dodge Challenger/Charger 6.4L V8 2012-2021 (63-1565)
K&N 63 Series AirCharger High Performance Air Intake Kit. A look under the hood of modern cars makes clear that the air flow is restricted by unnecessary bends and kinks. This robs a vehicle of its natural horsepower. Air flows the best in a straight line and is preferably not slowed down by the filter material. The K&N 63 Series Aircharger Kit virtually eliminates the air intake restrictions in the air flow to the engine. The aerodynamically designed tube forces a massive amount of air into the engine, which translates into more power. This kit has the largest conical High- Flow air filter that fits in the engine compartment and still uses the factory holes and mounting points. The filter is isolated from the engine by a thermal shield designed to reduce the temperature of the air taken in by the motor. This provides better performance. The air filter is attached to a rotationally molded tube, braided with High Density Polyethylene. This reduces the turbulence and accelerates the air flow into the engine. With this system, you get the best High-Flow intake system available. With a K&N kit you optimize the air supply to your engine. This ensures better performance and a better engine sound. Because of this feature many people call it a power filter. Benefits of a K&N 63 Series AirCharger High Performance Air Intake Kit.: 1. More power, more torque and better throttle response. 2. The kit includes all needed brackets, hoses and attachments. 3. Water repellent. 4. Washable & reusable. 5. 4 layers of oiled cotton for maximum protection. The oil layer works as a magnet. Dust and dirt is stopped on the outside even though there is 40% more air forced into the engine. 6. 600.000 miles warranty. 7. Only clean every 50.000 to 100.000 miles. 8. The kit features a clear manual. 9. All metal parts are coated for long life. Assembly: You can easily install the K&N AirCharger kit in the car and take it out just as easy. On YouTube you can find numerous instructional videos to assist you. If you still want to have assistance when installing your K&N kit you can always go to your dealer.
K&N Aircharger Kit Dodge Ram 1500 3.0L Turbo Diesel V6 2020-2023 (63-1586)
K&N Aircharger Kit Dodge Ram 1500 3.0L Turbo Diesel V6 2020-2023 (63-1586) The K&N AirCharger air intake system replaces the restrictive factory air filter and air intake housing. K&N air intakes are designed to dramatically reduce air intake restriction as well as smooth and straighten air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engines RPM range. The air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the original air box space. Air is directed through an aerodynamically engineered intake tube into the engines throttle body for a guaranteed power gain. The tube accommodates the factory crank case vent hose and air inlet temperature sensor as well as the blow off valve. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install, usually in 90 minutes or less using your vehicles existing factory mounting points. The tools needed are a screwdriver, ratchet set and an Allen wrench. This air intake cannot be sold in California. It is not legal for use in California or other states adopting California emission standards. - Guaranteed horsepower gain - Designed to improve throttle response and engine sound - Free-flowing high density polyethylene tube - Replaces entire factory air intake system - K&N Million Mile Limited Warranty - Lasts up to 100,000 miles before service is required (depending on driving conditions) - Easy to install, usually in 90 minutes or less
K&N Aircharger Kit Dodge Ram 1500 3.6L F/I V6 2020-2023 (63-1594)
K&N Aircharger Kit Dodge Ram 1500 3.6L F/I V6 2020-2023 (63-1594) The K&N AirCharger air intake system replaces the restrictive factory air filter and air intake housing. K&N air intakes are designed to dramatically reduce air intake restriction as well as smooth and straighten air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engines RPM range. The air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the original air box space. Air is directed through an aerodynamically engineered intake tube into the engines throttle body for a guaranteed power gain. The tube accommodates the factory crank case vent hose and air inlet temperature sensor as well as the blow off valve. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install, usually in 90 minutes or less using your vehicles existing factory mounting points. The tools needed are a screwdriver, ratchet set and an Allen wrench. This air intake cannot be sold in California. It is not legal for use in California or other states adopting California emission standards. - Guaranteed horsepower gain - Designed to improve throttle response and engine sound - Free-flowing high density polyethylene tube - Replaces entire factory air intake system - K&N Million Mile Limited Warranty - Lasts up to 100,000 miles before service is required (depending on driving conditions) - Easy to install, usually in 90 minutes or less
K&N Aircharger Kit Dodge RAM 1500/2500/3500 5.7L V8 2009-2021 (63-1561)
K&N 63 Series AirCharger High Performance Air Intake Kit. A look under the hood of modern cars makes clear that the air flow is restricted by unnecessary bends and kinks. This robs a vehicle of its natural horsepower. Air flows the best in a straight line and is preferably not slowed down by the filter material. The K&N 63 Series Aircharger Kit virtually eliminates the air intake restrictions in the air flow to the engine. The aerodynamically designed tube forces a massive amount of air into the engine, which translates into more power. This kit has the largest conical High- Flow air filter that fits in the engine compartment and still uses the factory holes and mounting points. The filter is isolated from the engine by a thermal shield designed to reduce the temperature of the air taken in by the motor. This provides better performance. The air filter is attached to a rotationally molded tube, braided with High Density Polyethylene. This reduces the turbulence and accelerates the air flow into the engine. With this system, you get the best High-Flow intake system available. With a K&N kit you optimize the air supply to your engine. This ensures better performance and a better engine sound. Because of this feature many people call it a power filter. Benefits of a K&N 63 Series AirCharger High Performance Air Intake Kit.: 1. More power, more torque and better throttle response. 2. The kit includes all needed brackets, hoses and attachments. 3. Water repellent. 4. Washable & reusable. 5. 4 layers of oiled cotton for maximum protection. The oil layer works as a magnet. Dust and dirt is stopped on the outside even though there is 40% more air forced into the engine. 6. 600.000 miles warranty. 7. Only clean every 50.000 to 100.000 miles. 8. The kit features a clear manual. 9. All metal parts are coated for long life. Assembly: You can easily install the K&N AirCharger kit in the car and take it out just as easy. On YouTube you can find numerous instructional videos to assist you. If you still want to have assistance when installing your K&N kit you can always go to your dealer.
K&N Aircharger Kit Dodge Ram 2500/3500 6.7L Diesel 2010-2012 (63-1562)
K&N Aircharger Kit Dodge Ram 2500/3500 6.7L Diesel 2010-2012 The K&N AirCharger air intake system replaces the restrictive factory air filter and air intake housing. K&N air intakes are designed to dramatically reduce air intake restriction as well as smooth and straighten air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engines RPM range. The air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the original air box space. Air is directed through an aerodynamically engineered intake tube into the engines throttle body for a guaranteed power gain. The tube accommodates the factory crank case vent hose and air inlet temperature sensor as well as the blow off valve. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install, usually in 90 minutes or less using your vehicles existing factory mounting points. The tools needed are a screwdriver, ratchet set and an Allen wrench. This air intake cannot be sold in California. It is not legal for use in California or other states adopting California emission standards. - Guaranteed horsepower gain - Designed to improve throttle response and engine sound - Free-flowing high density polyethylene tube - Replaces entire factory air intake system - K&N Million Mile Limited Warranty - Lasts up to 100,000 miles before service is required (depending on driving conditions) - Easy to install, usually in 90 minutes or less
K&N Aircharger Kit Dodge Ram 2500/3500 6.7L Diesel 2013-2018 (57-1568)
K&N 57i Kit Dodge Ram 2500/3500 6.7L Diesel 2013-2018 K&N 57i kit. A look under the hood of modern cars makes it clear that the air intake is limited by unnecessary bends and kinks. Air flows the best in a straight line, and is most preferable not slowed down by the filter material. With a K&N air filter you optimize the air supply to your engine. This ensures better performance and a better engine sound. Because of this feature many people call it a power filter. Benefits of a K&N 57i kit: 1. More power, more torque and better throttle response. 2. The kit includes all needed brackets, hoses and attachments. 3. Water repellent. 4. Washable & reusable. 5. 4 layers of oiled cotton for maximum protection. The oil layer is a magnet. Dust and dirt is stopped on the outside even though there is 40% more air forced into the engine. 6. 600.000 miles warranty. 7. Only clean every 50.000 to 100.000 miles. 8. The kit features a clear manual. 9. Most kits come with a cold air supply hose. 10. All metal parts are coated for long life.
K&N Aircharger Kit Dodge Ram 4.7L V8 2008-2012 (63-1529)
K&N Aircharger Kit Dodge Ram, V8-4.7L 2008-2012 The K&N AirCharger air intake system replaces the restrictive factory air filter and air intake housing. K&N air intakes are designed to dramatically reduce air intake restriction as well as smooth and straighten air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engines RPM range. The air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the original air box space. Air is directed through an aerodynamically engineered intake tube into the engines throttle body for a guaranteed power gain. The tube accommodates the factory crank case vent hose and air inlet temperature sensor as well as the blow off valve. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install, usually in 90 minutes or less using your vehicles existing factory mounting points. The tools needed are a screwdriver, ratchet set and an Allen wrench. This air intake cannot be sold in California. It is not legal for use in California or other states adopting California emission standards. - Guaranteed horsepower gain - Designed to improve throttle response and engine sound - Free-flowing high density polyethylene tube - Replaces entire factory air intake system - K&N Million Mile Limited Warranty - Lasts up to 100,000 miles before service is required (depending on driving conditions) - Easy to install, usually in 90 minutes or less