Sports air filters ensure a better air flow. With a Sport Air filter, power and acceleration can be increased. A Sport Air filter also lasts longer than a standard air filter. A Sport Air Filter in many cases more than 1,000,000 km.
Brands like K&N and Green even give this guarantee. We supply these K&N Filters and Green Filters as replacement filters but also as Air intake kits. We also supply Sport Air Filters of the brands Pipercross, Injen and FK.
If you can not find certain items in our webshop, ask one of our employees.
K&N Apollo Kit VW Bora 1.9 TDI 2/1999-05
K&N Apollo Kit VW Bora 1.9 TDI 2/1999-05Passend voor: Automerk: VWModel type: BoraMotor inhoud: 1.9 TDIBouwjaar: 2/1999-05PK's: 90/100/105/115Extra motor informatie: De voordelen van een K&N luchtfilter: -Uitwasbaar filter met een hoge luchtdoorlaat-Geëpoxeerd aluminium rooster ter bescherming van het filter medium en de geleiding van de luchtstroom-Vervangt het standaard luchtfilter-Het filter wordt niet aangetast door vocht, zelfs als het filter helemaal nat geweest is, hoeft u deze niet te vervangen-1,6 miljoen kilometer beperkte garantie. U schaft het filter eenmalig aan en u kunt het reinigen en opnieuw inoliën (tot wel 25 keer)-Ingeoliëd medisch katoen houdt stof en vuil aan de buitenkant om de filterwerking te verbeteren-Gelaste flexibele afdichtrand garandeert een perfecte afdichting
K&N Apollo Kit VW Golf IV 1.8 1997-04
K&N Apollo Kit VW Golf IV 1.8 1997-04Passend voor: Automerk: VWModel type: Golf IVMotor inhoud: 1.8Bouwjaar: 1997-04PK's: 150Extra motor informatie: Turbo = ApollokitDe voordelen van een K&N luchtfilter: -Uitwasbaar filter met een hoge luchtdoorlaat-Geëpoxeerd aluminium rooster ter bescherming van het filter medium en de geleiding van de luchtstroom-Vervangt het standaard luchtfilter-Het filter wordt niet aangetast door vocht, zelfs als het filter helemaal nat geweest is, hoeft u deze niet te vervangen-1,6 miljoen kilometer beperkte garantie. U schaft het filter eenmalig aan en u kunt het reinigen en opnieuw inoliën (tot wel 25 keer)-Ingeoliëd medisch katoen houdt stof en vuil aan de buitenkant om de filterwerking te verbeteren-Gelaste flexibele afdichtrand garandeert een perfecte afdichting
K&N Apollo Kit VW Golf IV 1.9 11/1997-2/04
K&N Apollo Kit VW Golf IV 1.9 11/1997-2/04Passend voor: Automerk: VWModel type: Golf IVMotor inhoud: 1.9Bouwjaar: 11/1997-2/04PK's: 90/100/105/115Extra motor informatie: De voordelen van een K&N luchtfilter: -Uitwasbaar filter met een hoge luchtdoorlaat-Geëpoxeerd aluminium rooster ter bescherming van het filter medium en de geleiding van de luchtstroom-Vervangt het standaard luchtfilter-Het filter wordt niet aangetast door vocht, zelfs als het filter helemaal nat geweest is, hoeft u deze niet te vervangen-1,6 miljoen kilometer beperkte garantie. U schaft het filter eenmalig aan en u kunt het reinigen en opnieuw inoliën (tot wel 25 keer)-Ingeoliëd medisch katoen houdt stof en vuil aan de buitenkant om de filterwerking te verbeteren-Gelaste flexibele afdichtrand garandeert een perfecte afdichting
K&N Blackhawk Induction Air Intake System Cadillac Escalade & Chevrolet Avalanche/Silverado 1500/Suburban 1500/Tahoe & GMC Sierra 1500/Yukon 4.8/5.3/6.0/6.2L 2007-2008 (71-3058)
The K&N high-flow performance air intake system is a free-flowing, mandrel-bent aluminum tube air induction system. The restrictive factory air filter and air intake housing on your vehicle are replaced by this K&N air intake system which is designed to dramatically reduce air flow restriction as it smoothes and straightens air flow. The improved air flow allows your engine to inhale a larger amount of air than it would from the stock air intake. More air means more usable power and acceleration throughout your engine’s RPM range. The air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the previous air box space. Air is directed through the intake tube into the engine’s throttle body for a guaranteed power gain. The intake tube has an attractive chrome-like finish that's made to last and it accommodates the factory air temperature sensor and crank case vent hose where equipped on certain vehicle models. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. The tools needed are a screwdriver and a ratchet set. Some K&N 71 series air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the K&N catalog or website for vehicle applications and specific CARB status for each vehicle and air intake. - Guaranteed to increase horsepower - Designed to improve throttle response and engine sound - Free-flowing aluminum tube - Replaces entire factory air intake system - Lasts up to 100,000 miles before service is required (depending on driving conditions) - Easy to install, usually in 90 minutes or less - Washable and reusable lifetime air filter
K&N Blackhawk Induction Air Intake System Cadillac Escalade & Chevrolet Suburban/Silverado 1500/Tahoe & GMC Sierra/Yukon 5.3/6.2 2014-2020 (71-3082)
The K&N high-flow performance air intake system is a free-flowing, mandrel-bent aluminum tube air induction system. The restrictive factory air filter and air intake housing on your vehicle are replaced by this K&N air intake system which is designed to dramatically reduce air flow restriction as it smoothes and straightens air flow. The improved air flow allows your engine to inhale a larger amount of air than it would from the stock air intake. More air means more usable power and acceleration throughout your engine’s RPM range. The air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the previous air box space. Air is directed through the intake tube into the engine’s throttle body for a guaranteed power gain. The intake tube has an attractive chrome-like finish that's made to last and it accommodates the factory air temperature sensor and crank case vent hose where equipped on certain vehicle models. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. The tools needed are a screwdriver and a ratchet set. Some K&N 71 series air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the K&N catalog or website for vehicle applications and specific CARB status for each vehicle and air intake. - Guaranteed to increase horsepower - Designed to improve throttle response and engine sound - Free-flowing aluminum tube - Replaces entire factory air intake system - Lasts up to 100,000 miles before service is required (depending on driving conditions) - Easy to install, usually in 90 minutes or less - Washable and reusable lifetime air filter
K&N Blackhawk Induction Air Intake System Cadillac Escalade ESV/EXT & Chevrolet Avalanche/Silverado 1500/Tahoe & GMC Sierra 1500/Yukon 4.8/5.3/6.0/6.2L 2009-2014 (71-3070)
The K&N high-flow performance air intake system is a free-flowing, mandrel-bent aluminum tube air induction system. The restrictive factory air filter and air intake housing on your vehicle are replaced by this K&N air intake system which is designed to dramatically reduce air flow restriction as it smoothes and straightens air flow. The improved air flow allows your engine to inhale a larger amount of air than it would from the stock air intake. More air means more usable power and acceleration throughout your engine’s RPM range. The air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the previous air box space. Air is directed through the intake tube into the engine’s throttle body for a guaranteed power gain. The intake tube has an attractive chrome-like finish that's made to last and it accommodates the factory air temperature sensor and crank case vent hose where equipped on certain vehicle models. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. The tools needed are a screwdriver and a ratchet set. Some K&N 71 series air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the K&N catalog or website for vehicle applications and specific CARB status for each vehicle and air intake. - Guaranteed to increase horsepower - Designed to improve throttle response and engine sound - Free-flowing aluminum tube - Replaces entire factory air intake system - Lasts up to 100,000 miles before service is required (depending on driving conditions) - Easy to install, usually in 90 minutes or less - Washable and reusable lifetime air filter
K&N Blackhawk Induction Air Intake System Chevrolet Camaro SS 6.2L 2010-2015 (71-4519)
The K&N high-flow performance air intake system is a free-flowing, mandrel-bent aluminum tube air induction system. The restrictive factory air filter and air intake housing on your vehicle are replaced by this K&N air intake system which is designed to dramatically reduce air flow restriction as it smoothes and straightens air flow. The improved air flow allows your engine to inhale a larger amount of air than it would from the stock air intake. More air means more usable power and acceleration throughout your engine’s RPM range. The air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the previous air box space. Air is directed through the intake tube into the engine’s throttle body for a guaranteed power gain. The intake tube has an attractive chrome-like finish that's made to last and it accommodates the factory air temperature sensor and crank case vent hose where equipped on certain vehicle models. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. The tools needed are a screwdriver and a ratchet set. Some K&N 71 series air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the K&N catalog or website for vehicle applications and specific CARB status for each vehicle and air intake. - Guaranteed to increase horsepower - Designed to improve throttle response and engine sound - Free-flowing aluminum tube - Replaces entire factory air intake system - Lasts up to 100,000 miles before service is required (depending on driving conditions) - Easy to install, usually in 90 minutes or less - Washable and reusable lifetime air filter
K&N Blackhawk Induction Air Intake System Chevrolet Camaro SS 6.2L 2016-2020 (71-3092)
The K&N high-flow performance air intake system is a free-flowing, mandrel-bent aluminum tube air induction system. The restrictive factory air filter and air intake housing on your vehicle are replaced by this K&N air intake system which is designed to dramatically reduce air flow restriction as it smoothes and straightens air flow. The improved air flow allows your engine to inhale a larger amount of air than it would from the stock air intake. More air means more usable power and acceleration throughout your engine’s RPM range. The air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the previous air box space. Air is directed through the intake tube into the engine’s throttle body for a guaranteed power gain. The intake tube has an attractive chrome-like finish that's made to last and it accommodates the factory air temperature sensor and crank case vent hose where equipped on certain vehicle models. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. The tools needed are a screwdriver and a ratchet set. Some K&N 71 series air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the K&N catalog or website for vehicle applications and specific CARB status for each vehicle and air intake. - Guaranteed to increase horsepower - Designed to improve throttle response and engine sound - Free-flowing aluminum tube - Replaces entire factory air intake system - Lasts up to 100,000 miles before service is required (depending on driving conditions) - Easy to install, usually in 90 minutes or less - Washable and reusable lifetime air filter
K&N Blackhawk Induction Air Intake System Chevrolet Colorado & GMC Canyon 3.6L V6 2015-2016 (71-3088)
The K&N high-flow performance air intake system is a free-flowing, mandrel-bent aluminum tube air induction system. The restrictive factory air filter and air intake housing on your vehicle are replaced by this K&N air intake system which is designed to dramatically reduce air flow restriction as it smoothes and straightens air flow. The improved air flow allows your engine to inhale a larger amount of air than it would from the stock air intake. More air means more usable power and acceleration throughout your engine’s RPM range. The air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the previous air box space. Air is directed through the intake tube into the engine’s throttle body for a guaranteed power gain. The intake tube has an attractive chrome-like finish that's made to last and it accommodates the factory air temperature sensor and crank case vent hose where equipped on certain vehicle models. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. The tools needed are a screwdriver and a ratchet set. Some K&N 71 series air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the K&N catalog or website for vehicle applications and specific CARB status for each vehicle and air intake. - Guaranteed to increase horsepower - Designed to improve throttle response and engine sound - Free-flowing aluminum tube - Replaces entire factory air intake system - Lasts up to 100,000 miles before service is required (depending on driving conditions) - Easy to install, usually in 90 minutes or less - Washable and reusable lifetime air filter
K&N Blackhawk Induction Air Intake System Chevrolet Silverado 2500/3500 & GMC Sierra 2500/3500 6.6L Diesel 2007-2010 (71-3066)
The K&N high-flow performance air intake system is a free-flowing, mandrel-bent aluminum tube air induction system. The restrictive factory air filter and air intake housing on your vehicle are replaced by this K&N air intake system which is designed to dramatically reduce air flow restriction as it smoothes and straightens air flow. The improved air flow allows your engine to inhale a larger amount of air than it would from the stock air intake. More air means more usable power and acceleration throughout your engine’s RPM range. The air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the previous air box space. Air is directed through the intake tube into the engine’s throttle body for a guaranteed power gain. The intake tube has an attractive chrome-like finish that's made to last and it accommodates the factory air temperature sensor and crank case vent hose where equipped on certain vehicle models. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. The tools needed are a screwdriver and a ratchet set. Some K&N 71 series air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the K&N catalog or website for vehicle applications and specific CARB status for each vehicle and air intake. - Guaranteed to increase horsepower - Designed to improve throttle response and engine sound - Free-flowing aluminum tube - Replaces entire factory air intake system - Lasts up to 100,000 miles before service is required (depending on driving conditions) - Easy to install, usually in 90 minutes or less - Washable and reusable lifetime air filter
K&N Blackhawk Induction Air Intake System Chrysler 300 6.4L 2012-2014 & Dodge Challenger/Charger 6.4L 2011-2021 (71-2545)
The K&N high-flow performance air intake system is a free-flowing, mandrel-bent aluminum tube air induction system. The restrictive factory air filter and air intake housing on your vehicle are replaced by this K&N air intake system which is designed to dramatically reduce air flow restriction as it smoothes and straightens air flow. The improved air flow allows your engine to inhale a larger amount of air than it would from the stock air intake. More air means more usable power and acceleration throughout your engine’s RPM range. The air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the previous air box space. Air is directed through the intake tube into the engine’s throttle body for a guaranteed power gain. The intake tube has an attractive chrome-like finish that's made to last and it accommodates the factory air temperature sensor and crank case vent hose where equipped on certain vehicle models. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. The tools needed are a screwdriver and a ratchet set. Some K&N 71 series air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the K&N catalog or website for vehicle applications and specific CARB status for each vehicle and air intake. - Guaranteed to increase horsepower - Designed to improve throttle response and engine sound - Free-flowing aluminum tube - Replaces entire factory air intake system - Lasts up to 100,000 miles before service is required (depending on driving conditions) - Easy to install, usually in 90 minutes or less - Washable and reusable lifetime air filter
K&N Blackhawk Induction Air Intake System Chrysler 300/300C & Dodge Charger/Challenger/Magnum 5.7/6.1L 2005-2021 (71-1542)
K&N Intake Kit Chrysler 300C & Dodge Charger/Challenger/Magnum 5.7/6.1 2005-2016 (71-1542) The K&N high-flow performance air intake system is a free-flowing, mandrel-bent aluminum tube air induction system. The restrictive factory air filter and air intake housing on your vehicle are replaced by this K&N air intake system which is designed to dramatically reduce air flow restriction as it smoothes and straightens air flow. The improved air flow allows your engine to inhale a larger amount of air than it would from the stock air intake. More air means more usable power and acceleration throughout your engine’s RPM range. The air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the previous air box space. Air is directed through the intake tube into the engine’s throttle body for a guaranteed power gain. The intake tube has an attractive chrome-like finish that's made to last and it accommodates the factory air temperature sensor and crank case vent hose where equipped on certain vehicle models. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. The tools needed are a screwdriver and a ratchet set. Some K&N 71 series air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the K&N catalog or website for vehicle applications and specific CARB status for each vehicle and air intake. - Guaranteed to increase horsepower - Designed to improve throttle response and engine sound - Free-flowing aluminum tube - Replaces entire factory air intake system - Lasts up to 100,000 miles before service is required (depending on driving conditions) - Easy to install, usually in 90 minutes or less - Washable and reusable lifetime air filter - K&N Million Mile Limited Warranty
K&N Blackhawk Induction Air Intake System Dodge Ram 1500/2500 5.7L 2010-2021 (71-1561)
The K&N high-flow performance air intake system is a free-flowing, mandrel-bent aluminum tube air induction system. The restrictive factory air filter and air intake housing on your vehicle are replaced by this K&N air intake system which is designed to dramatically reduce air flow restriction as it smoothes and straightens air flow. The improved air flow allows your engine to inhale a larger amount of air than it would from the stock air intake. More air means more usable power and acceleration throughout your engine’s RPM range. The air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the previous air box space. Air is directed through the intake tube into the engine’s throttle body for a guaranteed power gain. The intake tube has an attractive chrome-like finish that's made to last and it accommodates the factory air temperature sensor and crank case vent hose where equipped on certain vehicle models. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. The tools needed are a screwdriver and a ratchet set. Some K&N 71 series air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the K&N catalog or website for vehicle applications and specific CARB status for each vehicle and air intake. - Guaranteed to increase horsepower - Designed to improve throttle response and engine sound - Free-flowing aluminum tube - Replaces entire factory air intake system - Lasts up to 100,000 miles before service is required (depending on driving conditions) - Easy to install, usually in 90 minutes or less - Washable and reusable lifetime air filter
K&N Blackhawk Induction Air Intake System Dodge Ram 1500/2500/3500 5.7L V6 2003-2008 (71-1533)
The K&N high-flow performance air intake system is a free-flowing, mandrel-bent aluminum tube air induction system. The restrictive factory air filter and air intake housing on your vehicle are replaced by this K&N air intake system which is designed to dramatically reduce air flow restriction as it smoothes and straightens air flow. The improved air flow allows your engine to inhale a larger amount of air than it would from the stock air intake. More air means more usable power and acceleration throughout your engine’s RPM range. The air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the previous air box space. Air is directed through the intake tube into the engine’s throttle body for a guaranteed power gain. The intake tube has an attractive chrome-like finish that's made to last and it accommodates the factory air temperature sensor and crank case vent hose where equipped on certain vehicle models. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. The tools needed are a screwdriver and a ratchet set. Some K&N 71 series air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the K&N catalog or website for vehicle applications and specific CARB status for each vehicle and air intake. - Guaranteed to increase horsepower - Designed to improve throttle response and engine sound - Free-flowing aluminum tube - Replaces entire factory air intake system - Lasts up to 100,000 miles before service is required (depending on driving conditions) - Easy to install, usually in 90 minutes or less - Washable and reusable lifetime air filter
K&N Blackhawk Induction Air Intake System Dodge Ram 2500/3500 5.9L Diesel 2003-2007 (71-1532)
The K&N high-flow performance air intake system is a free-flowing, mandrel-bent aluminum tube air induction system. The restrictive factory air filter and air intake housing on your vehicle are replaced by this K&N air intake system which is designed to dramatically reduce air flow restriction as it smoothes and straightens air flow. The improved air flow allows your engine to inhale a larger amount of air than it would from the stock air intake. More air means more usable power and acceleration throughout your engine’s RPM range. The air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the previous air box space. Air is directed through the intake tube into the engine’s throttle body for a guaranteed power gain. The intake tube has an attractive chrome-like finish that's made to last and it accommodates the factory air temperature sensor and crank case vent hose where equipped on certain vehicle models. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. The tools needed are a screwdriver and a ratchet set. Some K&N 71 series air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the K&N catalog or website for vehicle applications and specific CARB status for each vehicle and air intake. - Guaranteed to increase horsepower - Designed to improve throttle response and engine sound - Free-flowing aluminum tube - Replaces entire factory air intake system - Lasts up to 100,000 miles before service is required (depending on driving conditions) - Easy to install, usually in 90 minutes or less - Washable and reusable lifetime air filter
K&N Blackhawk Induction Air Intake System Dodge Ram 2500/3500 6.7L Diesel 2007-2009 (71-1557)
The K&N high-flow performance air intake system is a free-flowing, mandrel-bent aluminum tube air induction system. The restrictive factory air filter and air intake housing on your vehicle are replaced by this K&N air intake system which is designed to dramatically reduce air flow restriction as it smoothes and straightens air flow. The improved air flow allows your engine to inhale a larger amount of air than it would from the stock air intake. More air means more usable power and acceleration throughout your engine’s RPM range. The air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the previous air box space. Air is directed through the intake tube into the engine’s throttle body for a guaranteed power gain. The intake tube has an attractive chrome-like finish that's made to last and it accommodates the factory air temperature sensor and crank case vent hose where equipped on certain vehicle models. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. The tools needed are a screwdriver and a ratchet set. Some K&N 71 series air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the K&N catalog or website for vehicle applications and specific CARB status for each vehicle and air intake. - Guaranteed to increase horsepower - Designed to improve throttle response and engine sound - Free-flowing aluminum tube - Replaces entire factory air intake system - Lasts up to 100,000 miles before service is required (depending on driving conditions) - Easy to install, usually in 90 minutes or less - Washable and reusable lifetime air filter
K&N Blackhawk Induction Air Intake System Dodge Ram 2500/3500 6.7L Diesel 2010-2012 (71-1562)
The K&N high-flow performance air intake system is a free-flowing, mandrel-bent aluminum tube air induction system. The restrictive factory air filter and air intake housing on your vehicle are replaced by this K&N air intake system which is designed to dramatically reduce air flow restriction as it smoothes and straightens air flow. The improved air flow allows your engine to inhale a larger amount of air than it would from the stock air intake. More air means more usable power and acceleration throughout your engine’s RPM range. The air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the previous air box space. Air is directed through the intake tube into the engine’s throttle body for a guaranteed power gain. The intake tube has an attractive chrome-like finish that's made to last and it accommodates the factory air temperature sensor and crank case vent hose where equipped on certain vehicle models. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. The tools needed are a screwdriver and a ratchet set. Some K&N 71 series air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the K&N catalog or website for vehicle applications and specific CARB status for each vehicle and air intake. - Guaranteed to increase horsepower - Designed to improve throttle response and engine sound - Free-flowing aluminum tube - Replaces entire factory air intake system - Lasts up to 100,000 miles before service is required (depending on driving conditions) - Easy to install, usually in 90 minutes or less - Washable and reusable lifetime air filter
K&N Blackhawk Induction Air Intake System Ford F150 5.0L V8 2011-2014 (71-2581)
The K&N high-flow performance air intake system is a free-flowing, mandrel-bent aluminum tube air induction system. The restrictive factory air filter and air intake housing on your vehicle are replaced by this K&N air intake system which is designed to dramatically reduce air flow restriction as it smoothes and straightens air flow. The improved air flow allows your engine to inhale a larger amount of air than it would from the stock air intake. More air means more usable power and acceleration throughout your engine’s RPM range. The air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the previous air box space. Air is directed through the intake tube into the engine’s throttle body for a guaranteed power gain. The intake tube has an attractive chrome-like finish that's made to last and it accommodates the factory air temperature sensor and crank case vent hose where equipped on certain vehicle models. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. The tools needed are a screwdriver and a ratchet set. Some K&N 71 series air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the K&N catalog or website for vehicle applications and specific CARB status for each vehicle and air intake. - Guaranteed to increase horsepower - Designed to improve throttle response and engine sound - Free-flowing aluminum tube - Replaces entire factory air intake system - Lasts up to 100,000 miles before service is required (depending on driving conditions) - Easy to install, usually in 90 minutes or less - Washable and reusable lifetime air filter
K&N Blackhawk Induction Air Intake System Ford F150 5.0L V8 2015-2016 (71-2591)
The K&N high-flow performance air intake system is a free-flowing, mandrel-bent aluminum tube air induction system. The restrictive factory air filter and air intake housing on your vehicle are replaced by this K&N air intake system which is designed to dramatically reduce air flow restriction as it smoothes and straightens air flow. The improved air flow allows your engine to inhale a larger amount of air than it would from the stock air intake. More air means more usable power and acceleration throughout your engine’s RPM range. The air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the previous air box space. Air is directed through the intake tube into the engine’s throttle body for a guaranteed power gain. The intake tube has an attractive chrome-like finish that's made to last and it accommodates the factory air temperature sensor and crank case vent hose where equipped on certain vehicle models. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. The tools needed are a screwdriver and a ratchet set. Some K&N 71 series air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the K&N catalog or website for vehicle applications and specific CARB status for each vehicle and air intake. - Guaranteed to increase horsepower - Designed to improve throttle response and engine sound - Free-flowing aluminum tube - Replaces entire factory air intake system - Lasts up to 100,000 miles before service is required (depending on driving conditions) - Easy to install, usually in 90 minutes or less - Washable and reusable lifetime air filter
K&N Blackhawk Induction Air Intake System Ford F150 6.2L V8 2011-2012 (71-2584)
The K&N high-flow performance air intake system is a free-flowing, mandrel-bent aluminum tube air induction system. The restrictive factory air filter and air intake housing on your vehicle are replaced by this K&N air intake system which is designed to dramatically reduce air flow restriction as it smoothes and straightens air flow. The improved air flow allows your engine to inhale a larger amount of air than it would from the stock air intake. More air means more usable power and acceleration throughout your engine’s RPM range. The air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the previous air box space. Air is directed through the intake tube into the engine’s throttle body for a guaranteed power gain. The intake tube has an attractive chrome-like finish that's made to last and it accommodates the factory air temperature sensor and crank case vent hose where equipped on certain vehicle models. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. The tools needed are a screwdriver and a ratchet set. Some K&N 71 series air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the K&N catalog or website for vehicle applications and specific CARB status for each vehicle and air intake. - Guaranteed to increase horsepower - Designed to improve throttle response and engine sound - Free-flowing aluminum tube - Replaces entire factory air intake system - Lasts up to 100,000 miles before service is required (depending on driving conditions) - Easy to install, usually in 90 minutes or less - Washable and reusable lifetime air filter
K&N Blackhawk Induction Air Intake System Ford F150/Lobo/Expedition/Lincoln Mark LT 5.4L V8 2004-2008 (71-2556)
The K&N high-flow performance air intake system is a free-flowing, mandrel-bent aluminum tube air induction system. The restrictive factory air filter and air intake housing on your vehicle are replaced by this K&N air intake system which is designed to dramatically reduce air flow restriction as it smoothes and straightens air flow. The improved air flow allows your engine to inhale a larger amount of air than it would from the stock air intake. More air means more usable power and acceleration throughout your engine’s RPM range. The air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the previous air box space. Air is directed through the intake tube into the engine’s throttle body for a guaranteed power gain. The intake tube has an attractive chrome-like finish that's made to last and it accommodates the factory air temperature sensor and crank case vent hose where equipped on certain vehicle models. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. The tools needed are a screwdriver and a ratchet set. Some K&N 71 series air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the K&N catalog or website for vehicle applications and specific CARB status for each vehicle and air intake. - Guaranteed to increase horsepower - Designed to improve throttle response and engine sound - Free-flowing aluminum tube - Replaces entire factory air intake system - Lasts up to 100,000 miles before service is required (depending on driving conditions) - Easy to install, usually in 90 minutes or less - Washable and reusable lifetime air filter
K&N Blackhawk Induction Air Intake System Ford F250/F350/F450/F550 Super Duty 6.4L V8 Diesel 2007-2010 (71-2576)
The K&N high-flow performance air intake system is a free-flowing, mandrel-bent aluminum tube air induction system. The restrictive factory air filter and air intake housing on your vehicle are replaced by this K&N air intake system which is designed to dramatically reduce air flow restriction as it smoothes and straightens air flow. The improved air flow allows your engine to inhale a larger amount of air than it would from the stock air intake. More air means more usable power and acceleration throughout your engine’s RPM range. The air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the previous air box space. Air is directed through the intake tube into the engine’s throttle body for a guaranteed power gain. The intake tube has an attractive chrome-like finish that's made to last and it accommodates the factory air temperature sensor and crank case vent hose where equipped on certain vehicle models. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. The tools needed are a screwdriver and a ratchet set. Some K&N 71 series air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the K&N catalog or website for vehicle applications and specific CARB status for each vehicle and air intake. - Guaranteed to increase horsepower - Designed to improve throttle response and engine sound - Free-flowing aluminum tube - Replaces entire factory air intake system - Lasts up to 100,000 miles before service is required (depending on driving conditions) - Easy to install, usually in 90 minutes or less - Washable and reusable lifetime air filter
K&N Blackhawk Induction Air Intake System Ford F250/F350/F450/F550 Super Duty 6.7L V8 Diesel 2011-2016 (71-2582)
The K&N high-flow performance air intake system is a free-flowing, mandrel-bent aluminum tube air induction system. The restrictive factory air filter and air intake housing on your vehicle are replaced by this K&N air intake system which is designed to dramatically reduce air flow restriction as it smoothes and straightens air flow. The improved air flow allows your engine to inhale a larger amount of air than it would from the stock air intake. More air means more usable power and acceleration throughout your engine’s RPM range. The air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the previous air box space. Air is directed through the intake tube into the engine’s throttle body for a guaranteed power gain. The intake tube has an attractive chrome-like finish that's made to last and it accommodates the factory air temperature sensor and crank case vent hose where equipped on certain vehicle models. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. The tools needed are a screwdriver and a ratchet set. Some K&N 71 series air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the K&N catalog or website for vehicle applications and specific CARB status for each vehicle and air intake. - Guaranteed to increase horsepower - Designed to improve throttle response and engine sound - Free-flowing aluminum tube - Replaces entire factory air intake system - Lasts up to 100,000 miles before service is required (depending on driving conditions) - Easy to install, usually in 90 minutes or less - Washable and reusable lifetime air filter
K&N Blackhawk Induction Air Intake System Ford Mustang GT 5.0L V8 2011-2014 (71-3527)
The K&N high-flow performance air intake system is a free-flowing, mandrel-bent aluminum tube air induction system. The restrictive factory air filter and air intake housing on your vehicle are replaced by this K&N air intake system which is designed to dramatically reduce air flow restriction as it smoothes and straightens air flow. The improved air flow allows your engine to inhale a larger amount of air than it would from the stock air intake. More air means more usable power and acceleration throughout your engine’s RPM range. The air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the previous air box space. Air is directed through the intake tube into the engine’s throttle body for a guaranteed power gain. The intake tube has an attractive chrome-like finish that's made to last and it accommodates the factory air temperature sensor and crank case vent hose where equipped on certain vehicle models. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. The tools needed are a screwdriver and a ratchet set. Some K&N 71 series air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the K&N catalog or website for vehicle applications and specific CARB status for each vehicle and air intake. - Guaranteed to increase horsepower - Designed to improve throttle response and engine sound - Free-flowing aluminum tube - Replaces entire factory air intake system - Lasts up to 100,000 miles before service is required (depending on driving conditions) - Easy to install, usually in 90 minutes or less - Washable and reusable lifetime air filter
K&N Blackhawk Induction Air Intake System Ford Mustang GT 5.0L V8 2015-2017 (71-3535)
The K&N high-flow performance air intake system is a free-flowing, mandrel-bent aluminum tube air induction system. The restrictive factory air filter and air intake housing on your vehicle are replaced by this K&N air intake system which is designed to dramatically reduce air flow restriction as it smoothes and straightens air flow. The improved air flow allows your engine to inhale a larger amount of air than it would from the stock air intake. More air means more usable power and acceleration throughout your engine’s RPM range. The air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the previous air box space. Air is directed through the intake tube into the engine’s throttle body for a guaranteed power gain. The intake tube has an attractive chrome-like finish that's made to last and it accommodates the factory air temperature sensor and crank case vent hose where equipped on certain vehicle models. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. The tools needed are a screwdriver and a ratchet set. Some K&N 71 series air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the K&N catalog or website for vehicle applications and specific CARB status for each vehicle and air intake. - Guaranteed to increase horsepower - Designed to improve throttle response and engine sound - Free-flowing aluminum tube - Replaces entire factory air intake system - Lasts up to 100,000 miles before service is required (depending on driving conditions) - Easy to install, usually in 90 minutes or less - Washable and reusable lifetime air filter
K&N Blackhawk Induction Air Intake System Ford Mustang GT 5.0L V8 2018-2021 (71-3540)
The K&N high-flow performance air intake system is a free-flowing, mandrel-bent aluminum tube air induction system. The restrictive factory air filter and air intake housing on your vehicle are replaced by this K&N air intake system which is designed to dramatically reduce air flow restriction as it smoothes and straightens air flow. The improved air flow allows your engine to inhale a larger amount of air than it would from the stock air intake. More air means more usable power and acceleration throughout your engine’s RPM range. The air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the previous air box space. Air is directed through the intake tube into the engine’s throttle body for a guaranteed power gain. The intake tube has an attractive chrome-like finish that's made to last and it accommodates the factory air temperature sensor and crank case vent hose where equipped on certain vehicle models. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. The tools needed are a screwdriver and a ratchet set. Some K&N 71 series air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the K&N catalog or website for vehicle applications and specific CARB status for each vehicle and air intake. - Guaranteed to increase horsepower - Designed to improve throttle response and engine sound - Free-flowing aluminum tube - Replaces entire factory air intake system - Lasts up to 100,000 miles before service is required (depending on driving conditions) - Easy to install, usually in 90 minutes or less - Washable and reusable lifetime air filter
K&N Blackhawk Induction Air Intake System Jeep Wrangler 3.6 2012-2018 (71-1566)
The K&N high-flow performance air intake system is a free-flowing, mandrel-bent aluminum tube air induction system. The restrictive factory air filter and air intake housing on your vehicle are replaced by this K&N air intake system which is designed to dramatically reduce air flow restriction as it smoothes and straightens air flow. The improved air flow allows your engine to inhale a larger amount of air than it would from the stock air intake. More air means more usable power and acceleration throughout your engine’s RPM range. The air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the previous air box space. Air is directed through the intake tube into the engine’s throttle body for a guaranteed power gain. The intake tube has an attractive chrome-like finish that's made to last and it accommodates the factory air temperature sensor and crank case vent hose where equipped on certain vehicle models. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. The tools needed are a screwdriver and a ratchet set. Some K&N 71 series air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the K&N catalog or website for vehicle applications and specific CARB status for each vehicle and air intake. - Guaranteed to increase horsepower - Designed to improve throttle response and engine sound - Free-flowing aluminum tube - Replaces entire factory air intake system - Lasts up to 100,000 miles before service is required (depending on driving conditions) - Easy to install, usually in 90 minutes or less - Washable and reusable lifetime air filter
K&N Blackhawk Induction Air Intake System Nissan 370Z 3.7L 2009-2020 & Infiniti G37 3.7L 2008-2013 (71-7078)
The K&N high-flow performance air intake system is a free-flowing, mandrel-bent aluminum tube air induction system. The restrictive factory air filter and air intake housing on your vehicle are replaced by this K&N air intake system which is designed to dramatically reduce air flow restriction as it smoothes and straightens air flow. The improved air flow allows your engine to inhale a larger amount of air than it would from the stock air intake. More air means more usable power and acceleration throughout your engine’s RPM range. The air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the previous air box space. Air is directed through the intake tube into the engine’s throttle body for a guaranteed power gain. The intake tube has an attractive chrome-like finish that's made to last and it accommodates the factory air temperature sensor and crank case vent hose where equipped on certain vehicle models. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. The tools needed are a screwdriver and a ratchet set. Some K&N 71 series air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the K&N catalog or website for vehicle applications and specific CARB status for each vehicle and air intake. - Guaranteed to increase horsepower - Designed to improve throttle response and engine sound - Free-flowing aluminum tube - Replaces entire factory air intake system - Lasts up to 100,000 miles before service is required (depending on driving conditions) - Easy to install, usually in 90 minutes or less - Washable and reusable lifetime air filter
K&N Blackhawk Induction Air Intake System Toyota Tacoma 3.5L V6 2016-2021 (71-9039)
The K&N high-flow performance air intake system is a free-flowing, mandrel-bent aluminum tube air induction system. The restrictive factory air filter and air intake housing on your vehicle are replaced by this K&N air intake system which is designed to dramatically reduce air flow restriction as it smoothes and straightens air flow. The improved air flow allows your engine to inhale a larger amount of air than it would from the stock air intake. More air means more usable power and acceleration throughout your engine’s RPM range. The air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the previous air box space. Air is directed through the intake tube into the engine’s throttle body for a guaranteed power gain. The intake tube has an attractive chrome-like finish that's made to last and it accommodates the factory air temperature sensor and crank case vent hose where equipped on certain vehicle models. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. The tools needed are a screwdriver and a ratchet set. Some K&N 71 series air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the K&N catalog or website for vehicle applications and specific CARB status for each vehicle and air intake. - Guaranteed to increase horsepower - Designed to improve throttle response and engine sound - Free-flowing aluminum tube - Replaces entire factory air intake system - Lasts up to 100,000 miles before service is required (depending on driving conditions) - Easy to install, usually in 90 minutes or less - Washable and reusable lifetime air filter
K&N Cabin Air filter Acura, Honda (VF2001)
K&N Cabin air filter Acura, Honda K&N Cabin Air Filters replace your vehicle's stock cabin filter with a reusable design that cleans and freshens incoming air. They are electrostatically charged to grab and hold dust particles. K&N cabin air filters help control odors while they help capture most mold, mildew, fungus, spores, bacteria and germs. When they get dirty they can be cleaned and reused and best of all, they come with a 10 year/100,000 mile limited warranty. - Easy to Clean and Reuse - Freshens and cleans incoming cabin air - Helps control odors - Helps capture most mold, mildew, fungus, spores, bacteria, germs, pollen and allergens - Factory fit - pre-treated and ready to install - Electrostatically charged to hold dirt and dust - 10 year/100,000 mile limited warranty
K&N Cabin Air filter Acura, Honda (VF3004)
K&N Cabin air filter Acura, Honda K&N Cabin Air Filters replace your vehicle's stock cabin filter with a reusable design that cleans and freshens incoming air. They are electrostatically charged to grab and hold dust particles. K&N cabin air filters help control odors while they help capture most mold, mildew, fungus, spores, bacteria and germs. When they get dirty they can be cleaned and reused and best of all, they come with a 10 year/100,000 mile limited warranty. - Easy to Clean and Reuse - Freshens and cleans incoming cabin air - Helps control odors - Helps capture most mold, mildew, fungus, spores, bacteria, germs, pollen and allergens - Factory fit - pre-treated and ready to install - Electrostatically charged to hold dirt and dust - 10 year/100,000 mile limited warranty
K&N Cabin Air Filter Audi A4, A5, S4, S5, Q5, SQ5 / Porsche Macan (VF3009)
K&N Cabin air filter Audi A4, A5, S4, S5, Q5, SQ5 / Porsche Macan (VF3009) K&N Cabin Air Filters replace your vehicle's stock cabin filter with a reusable design that cleans and freshens incoming air. They are electrostatically charged to grab and hold dust particles. K&N cabin air filters help control odors while they help capture most mold, mildew, fungus, spores, bacteria and germs. When they get dirty they can be cleaned and reused and best of all, they come with a 10 year/100,000 mile limited warranty. - Easy to Clean and Reuse - Freshens and cleans incoming cabin air - Helps control odors - Helps capture most mold, mildew, fungus, spores, bacteria, germs, pollen and allergens - Factory fit - pre-treated and ready to install - Electrostatically charged to hold dirt and dust - 10 year/100,000 mile limited warranty
K&N Cabin Air Filter Audi, Seat, Skoda, Volkswagen (VF3013)
K&N Cabin air filter Audi, Seat, Skoda, Volkswagen K&N Cabin Air Filters replace your vehicle's stock cabin filter with a reusable design that cleans and freshens incoming air. They are electrostatically charged to grab and hold dust particles. K&N cabin air filters help control odors while they help capture most mold, mildew, fungus, spores, bacteria and germs. When they get dirty they can be cleaned and reused and best of all, they come with a 10 year/100,000 mile limited warranty. - Easy to Clean and Reuse - Freshens and cleans incoming cabin air - Helps control odors - Helps capture most mold, mildew, fungus, spores, bacteria, germs, pollen and allergens - Factory fit - pre-treated and ready to install - Electrostatically charged to hold dirt and dust - 10 year/100,000 mile limited warranty
K&N Cabin Air Filter Audi, Seat, Volkswagen (VF2012)
K&N Cabin air filter Audi, Seat, Volkswagen K&N Cabin Air Filters replace your vehicle's stock cabin filter with a reusable design that cleans and freshens incoming air. They are electrostatically charged to grab and hold dust particles. K&N cabin air filters help control odors while they help capture most mold, mildew, fungus, spores, bacteria and germs. When they get dirty they can be cleaned and reused and best of all, they come with a 10 year/100,000 mile limited warranty. - Easy to Clean and Reuse - Freshens and cleans incoming cabin air - Helps control odors - Helps capture most mold, mildew, fungus, spores, bacteria, germs, pollen and allergens - Factory fit - pre-treated and ready to install - Electrostatically charged to hold dirt and dust - 10 year/100,000 mile limited warranty
K&N Cabin Air filter BMW i3 0.6/X1 2.0/X2 2.0 & Mini Cooper 1.5/2.0 (2 pieces) (VF2060)
K&N Cabin air filter BMW i3 0.6/X1 2.0/X2 2.0 & Mini Cooper 1.5/2.0 (2 pieces) (VF2060) K&N Cabin Air Filters replace your vehicle's stock cabin filter with a reusable design that cleans and freshens incoming air. They are electrostatically charged to grab and hold dust particles. K&N cabin air filters help control odors while they help capture most mold, mildew, fungus, spores, bacteria and germs. When they get dirty they can be cleaned and reused and best of all, they come with a 10 year/100,000 mile limited warranty. - Easy to Clean and Reuse - Freshens and cleans incoming cabin air - Helps control odors - Helps capture most mold, mildew, fungus, spores, bacteria, germs, pollen and allergens - Factory fit - pre-treated and ready to install - Electrostatically charged to hold dirt and dust - 10 year/100,000 mile limited warranty
K&N Cabin Air filter Buick, Cadillac, Chevrolet, Saab (VF2040)
K&N Cabin air filter Buick, Cadillac, Chevrolet, Saab K&N Cabin Air Filters replace your vehicle's stock cabin filter with a reusable design that cleans and freshens incoming air. They are electrostatically charged to grab and hold dust particles. K&N cabin air filters help control odors while they help capture most mold, mildew, fungus, spores, bacteria and germs. When they get dirty they can be cleaned and reused and best of all, they come with a 10 year/100,000 mile limited warranty. - Easy to Clean and Reuse - Freshens and cleans incoming cabin air - Helps control odors - Helps capture most mold, mildew, fungus, spores, bacteria, germs, pollen and allergens - Factory fit - pre-treated and ready to install - Electrostatically charged to hold dirt and dust - 10 year/100,000 mile limited warranty