EPCA04 SHARK FIN CAR ANTENNA DUMMY Description Shark fin antenna dummy. Its modern design and dynamic shape give the vehicle a stylish look. The black color and ergonomic form make the dummy perfectly complement various car models. Made from high-quality materials. Easy to install, just stick it on with double-sided tape.Technical Specifications:Dimensions: 15 x 7.5 x 5.5 cm (L x W x H)Installation: 3M double-sided tape - no drilling requiredFunction: No antenna function - purely decorative

EPCA05 CAR ANTENNA 24 CM DescriptionUniversal car antenna. Its design and classic black color make it perfectly suited for most vehicles. The product is made from high-quality materials, ensuring durability and reliable performance. Easy to install, this antenna provides stable and effective radio signal reception. The set includes 2 adapters for easier installation.Technical Specifications:Length: 24 cmAntenna type: PassiveFM frequency range: 88 MHz - 108 MHzAM frequency range: 535 kHz - 1605 kHzImpedance: 75 ohmsGain: NoneRadio reception: AM/FMVoltage: None (to the base of the roof antenna 16V)Material: TPR - Thermoplastic RubberMounting hole diameter: 5 mm (M5)Reducers included in the set (adapters): M5/M5, M5/M4The antenna is compatible with installations both with and without an antenna amplifier.

EPCA06 CAR ANTENNA 9 CM DescriptionUniversal car antenna. Its design and classic black color make it perfectly suited for most vehicles. The product is made from high-quality materials, ensuring durability and reliable performance. Easy to install, this antenna provides stable and effective radio signal reception. The set includes 2 adapters for easier installation.Technical Specifications:Length: 9 cmAntenna type: PassiveFM frequency range: 88 MHz - 108 MHzAM frequency range: 535 kHz - 1605 kHzImpedance: 75 ohmsGain: NoneRadio reception: AM/FMVoltage: None (to the base of the roof antenna 16V)Material: TPR - Thermoplastic RubberMounting hole diameter: 5 mm (M5)Reducers included in the set (adapters): M5/M5, M5/M4The antenna is compatible with installations both with and without an antenna amplifier.

EPCAP02 SILVER CAR AIR PURIFIER WITH CHARGER DescriptionCar air purifier with a USB chargerBasic functions:- Air purification- Ionization- Eliminating bad odors- Charging devices (up to 12.5W / connector)Technical data:Charging ports: 2x USBVoltage (input): DC 12V / 1.25A, DC 5V / 2.5ALED backlightMaximum charging power: 2.5ANegative ion concentration: 5,600,000 pcs / cm3Ozone concentration: ≤ 0.05 ppmPower consumption: 0.8 WColor: SilverDimensions: 35 × 35 × 105 mmWeight: 40g

EPCBC02 8A 12/24V BATTERY CHARGER WITH BATTERY REPAIR FUNCTION DescriptionAdvanced charging rectifier by EINPARTS. Powered by 230V AC, it offers an output voltage of 12/24V, ensuring versatile charging. Equipped with an intelligent temperature monitoring system, battery status indication, and four different operating modes, this rectifier is an indispensable tool for charging and maintaining car batteries, AGM, calcium, and low-capacity batteries. Reliability, safety, and effectiveness!Technical Data:Power Supply: 230V ACOutput Voltage: 12/24VOutput Voltage without Load: 13.8VInitial Minimum Voltage: Above 2VOutput Current:For 12V - 8 AFor 24V - 4 AMaximum Power under Load: 130WNo-Load Power: 3.2WCooling System: FanDimensions: 17x10x5.5 cmPower Cord Length: Approximately 115 cmLength of Clamp Cables: Approximately 70 cmEquipment:Battery Charge Level IndicatorVoltage and Current Charging IndicatorAmbient Temperature Sensor (If the temperature drops below 10 degrees Celsius, the rectifier will increase the charging voltage. If the temperature rises above 29 degrees Celsius, the rectifier will decrease the charging voltage)Indication of Incorrect Battery Connection, Contact Contamination, or Battery Damage4 OPERATING MODES:Car Battery Charging (30-150Ah):For 12V - Maximum Charging Current 8AFor 24V - Maximum Charging Current 4AAGM or Calcium Battery ChargingLow Capacity Battery Charging (6-30Ah):Maximum Charging Current 1.5ABattery Repair:Repair of Old, Sulfated Batteries (Note that not all batteries are suitable for repair)

EPCBC03 BATTERY CHARGER 12/24V 15A WITH REPAIR FUNCTION AND 8-STAGE CHARGING PROCESS DescriptionAn advanced charging function rectifier from EINPARTS. Powered by 230V AC voltage, it offers an output voltage of 12/24V, providing versatile charging. The rectifier is ideal for charging batteries for cars with START / STOP engines.Technical data:Power supply: 230V ACOutput Voltage: 12/24VOutput Current: Max 15AMaximum load power: 130WPower without load: 3.2WCooling System: FanDimensions: 17.5x13.5x7.5cm.Voltage identification for 12V: 8V - 14.5VVoltage identification for 24V: 18V - 29VOutput cable length: 120 cmInput cable length: 140 cm8 STAGES OF CHARGING:Phase 1: Battery Assessment - Examining the battery's charge state and verifying the correctness of the connections to the rectifier.Phase 2: Desulfation - Identifying a battery with sulfate deposits. Low-voltage, high-current pulsating charging allows for the removal of sulfate from electrodes, restoring the original battery capacity.Phase 3: State Check - Checking whether the battery is not damaged and whether it is capable of accepting a charging current. This prevents charging a damaged battery.Phase 4: Soft Start - Begins charging an undamaged battery with low current (about 15%), gradually increasing its value.Phase 5: Main Charging - Charging the battery with maximum constant current, automatically adjusted depending on the charge state, until 80% capacity is reached.Phase 6: Final Charging - Charging with decreasing current and constant voltage until the battery is fully charged (100%).Phase 7: Charging Test - About a two-minute test to check if the battery charge level is maintained after charging has ended. If so, the charging process is completed.Phase 8: Voltage Maintenance - Monitoring the battery voltage and maintaining an optimal charge at the 95-100% capacity level using current pulses.

EPCM03 Car Protective mat DescriptionCar Protective mat Polish production, will cover the entire rear sofa and rear backs of the front seats in your car.The mat is made with very durable eco -leather, which provides protection against hair, moisture and dirt. special fastening. The side parts of the mat are designed in such a way that, falling on the side of the seats, they also fulfill protective functions.The product is very easy to install. Just put it on the front and rear headrests. After folding, it does not take up much space, so you can carry it everywhere.After reaching the destination, the cover can be pulled out of the car along with the mud and hair remaining after transport.pollution remain inside the mat, Therefore, it can be easily dropped after removing the cover. In order to remove the remaining dirt of the product, you only need to wipe them with a wet cloth.The cover can also be used as mata for the trunk. The dark color of the cover makes the product perfectly adapts to the interior of any car.We also have the possibility of folding the mat in half. If you have a smaller pet, it allows us to save a lot of space on the rear sofa.In the cover there are places where you can drag seat belts . Thanks to this easy to pin the dog.Advantages of eco -leather:- cheaper than natural leather,- more flexible than natural leather,- easy to maintain and maintain,- - - Waterproof,- stain -resistant,- perfectly imitates natural skinPolish product!

EPCUS01 CAR SOCKET CHARGER 2 X USB 2.1A 12V-24V DescriptionThe advanced EINPARTS 2x USB car charger, designed to fit into your cigarette lighter socket, not only offers fast charging but also ensures the safety of your devices. Whether you're traveling by car, van, camper, or truck, this charger is an excellent choice. Gain the confidence that your devices are always ready to use, wherever you are!Technical data:Number of USB ports: 2Type of ports: 2x USB 2.1AInput: DC 12-24VOutput: 2x 5V/2.1AColor: BlackBacklit color: BlueWaterproof: Yes (IP66 with the rubber cap on)Included in the set:2x USB 2.1A Car ChargerCapRubber cap2x Connector

EPDVR04 FHD 1080P 7" TOUCH TFT + REAR CAMERA Specification:Resolutio:Full HD 1080PView angle:170°FPS:30 FPSScreen:7,0" LTPS-TFT LCDRecording format:AVI HDG-sensor:YESLoop recording:YESSupported memory card:MicroSD up to 32GBSound recording:YESCamera:YES

EPDVR05 FHD 1080P 9.66" FULL TFT + REAR CAMERA Specification:Resolution:Full HD 1080PView angle:170°FPS:30 FPSScreen:9,66" LTPS-TFT LCDRecording format:AVI HDG-sensor:YESLoop recording:YESSupported memory card:MicroSD up to 32GBSound recording:YESCamera:YES

EPF02 LICENSE PLATE FRAME - SILVER DescriptionUNIVERSAL EUROPEAN LICENSE PLATE FRAMEFrame designed for all license plates used in Europe (excluding Austria and Switzerland)Crack and high/low temperature resistant frame.Features:- Color: Silver- Width: 53 cm- Height: 13 cm- Plug & play installation- Crack and high/low temperature resistant- Abundant mounting holes

EPF03 LICENSE PLATE FRAME - CHROME DescriptionUNIVERSAL EUROPEAN LICENSE PLATE FRAMEFrame designed for all license plates used in Europe (excluding Austria and Switzerland)Crack and high/low temperature resistant frame.Features:- Color: Chrome- Width: 53 cm- Height: 13 cm- Plug & play installation- Crack and high/low temperature resistant- Abundant mounting holes

EPF04 LICENSE PLATE FRAME - SILVER DescriptionUNIVERSAL EUROPEAN LICENSE PLATE FRAMEFrame designed for all license plates used in Europe (excluding Austria and Switzerland)Crack and high/low temperature resistant frame.Features:- Color: Silver- Hot Stamping- Width: 53 cm- Height: 13 cm- Plug & play installation- Crack and high/low temperature resistant- Abundant mounting holes

EPF05 LICENSE PLATE FRAME STAINLESS STEEL DescriptionUNIVERSAL EUROPEAN LICENSE PLATE FRAMEFrame designed for all license plates used in Europe (excluding Austria and Switzerland)Crack and high/low temperature resistant frame.Features:- Color: Polished stainless steel- Width: 53 cm- Height: 13 cm- Plug & play installation- Crack and high/low temperature resistant- Abundant mounting holes- Stainless steel front

EPFB01 FRIOBOX THERMOELECTRIC COOLER BOX 24L DescriptionThe EinParts Automotive thermoelectric refrigerator with a capacity of 24 liters, featuring cooling and heating functions, will take care of your food and drinks in any situation. Two types of power supply, advanced insulation, and aesthetic design make it an essential travel companion.Technical Specifications:Capacity: 24 lPower Supply: DC 12V / AC 220-240VCooling/Heating FunctionDC 12V: cooling/heating power: 46W/42WAC 220-240V: cooling/heating power: 60W/55WType: Thermoelectric refrigeratorMax Power: 60WColor: Shades of grayHeight: 44 cmDepth: 26 cmWidth: 36 cm

EPFH01 Fuse Adapter BYPASS MICRO 20A DescriptionTechnical data:Fuse type: MICROWire length: 13cm (With quick-connect clamp)Max fuse: 10ANumber of sockets: 2