Intercooler Upgrade Kit: The Competition Intercooler has a mesh area of 640mm x 410mm x 65mm and therefore has 17 Liter of charge air volume (OEM 9 Liter). The specially developed mesh (Tube Fin) ensures that adjacent parts such as the water cooler still retain enough airflow and is above all very light. The intercooler weighs only 8.4 kg in total. The inlets and outlets of the intercooler are enlarged to Ø 70mm, therefore this kit comes with reinforced silicone hoses. The WAGNERTUNING Competition Intercooler-Kit for the VAG 1.8TSI - 2.0TSI engine fits following cars: - VW Golf 7 GTI 2.0 TSI 162KW/220HP 169KW/230PS (incl. facelift and Performance model)- VW Golf 7 R 2.0 TSI 221KW/300PS- Skoda Superb 3V 2.0TSI 162KW/220HP- Skoda Superb 3V 2.0TSI 206KW/280HP With modifications to the car also fitting on: - Audi A3 8V 1.8TSI 132KW/180HP*- Audi S3 8V 2.0TSI 221KW/300HP*- Audi TT 8S 2.0TFSI 169KW / 230HP*- Audi TTS 8S 2.0TSI 228KW/310HP*- Seat Leon 5F Cupra 2.0TSI 206KW/280HP*- Skoda Octavia 5E 1.8TSI 132KW/180HP*- Skoda Octavia 5E RS 2.0TSI 162KW/220HP* Delivery:1 Intercooler2 Silicone hoses2 Hose clamps1 Fastening material   Downpipe: - Made of high quality stainless steel SS304- diameter after the cat. Ø 76mm- CAD-Designed & Flow-optimized- 2 Lambda connections- Sport metal catalytic converter (200 CPI with EU6 jacket)- 100% fit, easy to replace against the original part- less thermal stress for the turbocharger- power increase due to reduced back pressure- considerable torque increase- including reduction in relation to the original exhaust

The Competition Intercooler Upgrade Kit is suitable for: Audi A4 B8.5 3,0 TDI (150KW/204hp MKB: CLAB)*Audi A4 B8.5 3,0 TDI (180KW/245hp MKB: CDUC, CKVC)*Audi A4 B8.5 Allroad 3,0 TDI (150KW/204hp MKB: CLAB)*Audi A4 B8.5 Allroad 3,0 TDI (180KW/245hp MKB: CDUC, CKVC)*Audi A5 B8.5 3,0 TDI (150KW/204hp MKB: CLAB)*Audi A5 B8.5 3,0 TDI (180KW/245hp MKB: CDUC, CKVC)*Audi A5 Sportback 3,0 TDI (150KW/204hp MKB: CLAB)*Audi A5 Sportback 3,0 TDI (180KW/245hp MKB: CDUC, CKVC)* * For vehicles with dynamic steering, the additional cooling loop must be relocated to a different position. You will find instructions in our installation manual. WAGNERTUNING Competition net with high cooling capacity at low weight (9,1kg)CAD designed freeform end boxes made of cast aluminum for best possible internal airflow178% more cooling surface and 158% more volume (net dimensions 610mm x 440mm x 65mm)enormously less backpressure than the series cooleranti-corrosion coating with heat conduction propertiesoptimal cooling with significant power increasecompletely ready-to-install kit, 100% accurate fiteasy to exchange against series intercoolerThe connection diameter is 67mm on both sides.   Scope of delivery:1 intercooler2 charge air hoses4 hose clamps1 mounting material1 assembly instruction

high-quality stainless steel 1.4301 (SS304)diameter 70mm with adapter for the original exhaust system2 racing catalyst converter (100 Cells / inch)better performance by reducing back pressure, significantly higher torqueplug and play for Audi TTRS 8J and Audi RS3 8Pcompatible with the original downpipe May not be approved for road use in your region.

Intercooler Upgrade Kit: The high-performance intercooler has the following mesh dimensions (515mm x 367[274]mm x 95mm), providing 120% more flow area and 142% more charge air volume compared to the original intercooler. The newly developed Competition high-performance mesh grants sufficient airflow to the adjacent components, such as the water cooler, and is also very lightweight. The end boxes of the charge air cooler are made of cast aluminum and were optimized under flow analyses in the CAD system. With the help of incorporated air baffles, in the entrance, a uniform filling of the intercooler is ensured. The result is excellent cooling properties with minimal back pressure. Thus, this kit is exactly the right thing for racing. The intercooler and the original crossmember form a stable unit and weighs only 11.2kg thanks to the new Competition high-performance mesh. The assembly is done at the original mounting points and is easy to perform(1:1 exchange). An optimal cooling of the charged air with a significant increase in performance! OEM intercooler: cooling surface 856cm² / charge air volume 6,8LWT EVO 1 Performance: cooling surface 856cm² / charge air volume 9,4LWT EVO 2 Competition: cooling surface 1391cm² / charge air volume 13,2LWT EVO 3 Competition: cooling surface 1890cm² / charge air volume 16,5L All our products are subject to constant qualitative monitoring. Scope of delivery:1 intercooler together with the cross bar1 mounting material1 set of license plate holder1 installation instruction Remark:only for racing   The Y-pipe kit for Audi TTRS 8J/RS3 8P with catalytic converter: diameter from 90mm to 2 times 70mmcomplete high quality stainless steel 1.4301 (SS304)without pre-catalyst1 lambda probe connection2 racing main catalysts (100 Cells/inch)100% accurate fit, easy to replace with stock partless thermal load for the turbochargermore power due to back pressure reductionmuch more torquefits for Audi TTRS 8J as well as Audi RS3 8Pcompatible with the original main catalysts

Intercooler Upgrade Kit: The high performance intercoolers have the following mesh dimensions (535mm x 160mm x 110mm), providing 40% more charge air volume compared to the original intercooler. The revised performance high-performance mesh offers very good cooling characteristics. The weight of the intercooler is 6.7kg. CAD designed cast aluminum freeform end boxes for best possible internal airflow. Overall this intercooler has far less back pressure than the stock intercooler. In addition, all our intercoolers have an anti-corrosion coating with heat conduction properties. This guarantees optimal cooling with a significant increase in performance. The installation is done by replacing the OEM intercooler - plug & play - the original intercooler hoses can still be used. All our products are subject to constant qualitative monitoring. The Performance Intercooler Upgrade Kit EVO 1 fits the following vehicles. Audi TTRS 8J 250KW/340HP (2009-2014)Audi TTRS plus 8J 265KW/360HP (2009-2014)Audi RS3 8P Sportback 250KW/340HP (2011-2013) Scope of delivery:1 intercooler1 assembly instruction The Y-pipe kit for Audi TTRS 8J/RS3 8P with catalytic converter: diameter from 90mm to 2 times 70mmcomplete high quality stainless steel 1.4301 (SS304)without pre-cat1 lambda probe connection2 racing main catalysts (100 Cells/inch)100% accurate fit, easy to replace with stock partless thermal load for the turbochargermore power due to back pressure reductionmuch more torquefits for Audi TTRS 8J as well as Audi RS3 8Pcompatible with the original main catalysts

Intercooler Upgrade Kit: The high performance intercooler has the following mesh dimensions (535mm x 260mm x 95mm), providing a 62.5% larger flow area and 94% more intercooler volume compared to the original intercooler. The new Competition high-performance mesh still grants sufficient airflow to the adjacent components, such as the water cooler, and is also very lightweight. The end boxes of the intercooler are made of cast aluminum and were optimized under flow analyses in the CAD system. This intercooler has hevorragende cooling properties and is just right for racing. The intercooler and the original crossmember form a stable unit and weighs less than 10kg thanks to the new Competition high-performance mesh. The assembly is done at the original mounting points and is easy to perform(1:1 exchange). An optimal cooling of the charged air with a significant increase in performance! OEM intercooler: cooling surface 856cm² / charge air volume 6,8LWT EVO 1 Performance: cooling surface 856cm² / charge air volume 9,4LWT EVO 2 Competition: cooling surface 1391cm² / charge air volume 13,2LWT EVO 3 Competition: cooling surface 1890cm² / charge air volume 16,5L All our products are subject to constant qualitative monitoring. Scope of delivery:1 intercooler together with the cross bar1 license plate holder 20° inclined1 assembly instruction Remark:only for racing   The Y-pipe kit for Audi TTRS 8J/RS3 8P with catalytic converter: diameter from 90mm to 2 times 70mmcomplete high quality stainless steel 1.4301 (SS304)without pre-catalyst1 lambda probe connection2 racing main catalysts (100 Cells/inch)100% accurate fit, easy to replace with stock partless thermal load for the turbochargermore power due to back pressure reductionmuch more torquefits for Audi TTRS 8J as well as Audi RS3 8Pcompatible with the original main catalysts

Audi RS3 8P 2011-2013 Wagner Competition Pakket: Intercooler EVO 3 + Downpipe incl kat. Intercooler upgrade kit: De intercooler kit EVO3 voor Audi RS3 8P is een verdere ontwikkeling van de eerder bekende intercooler kit EVO 2 . De high-performance intercooler heeft de volgende netto afmetingen (515mm x 367[274]mm x 95mm) en biedt daarmee een 120% groter stromingsgebied en 142% meer charge air volume in vergelijking met de originele intercooler. Het nieuw ontwikkelde Competition high-performance gaas zorgt voor voldoende luchtstroom naar de aangrenzende componenten, zoals de waterkoeler, en is bovendien zeer licht. De eindbakken van de intercooler zijn van gegoten aluminium en werden geoptimaliseerd aan de hand van stromingsanalyses in het CAD-systeem. Met behulp van geïntegreerde luchtschotten in de inlaat wordt een gelijkmatige vulling van de intercooler gegarandeerd. Het resultaat is uitstekende koeleigenschappen met minimale tegendruk. Deze kit is dus precies goed voor de racerij. De intercooler en de originele crossmember vormen een stabiele eenheid en wegen slechts 11,2 kg dankzij het nieuwe Competition high-performance gaas. De montage gebeurt op de originele bevestigingspunten en is eenvoudig uit te voeren (1:1 uitwisseling). Optimale koeling van de supercharged lucht met een duidelijke prestatieverhoging! OEM laadluchtkoeler: koeloppervlak 856cm² / laadluchtvolume 6,8LWT EVO 1 Performance: koeloppervlak 856cm² / laadluchtvolume 9,4LWT EVO 2 Competition: koeloppervlak 1391cm² / laadluchtvolume 13,2LWT EVO 3 Competition: koeloppervlak 1890cm² / laadluchtvolume 16,5L Al onze producten worden voortdurend kwalitatief gecontroleerd. Leveringsomvang:1 intercooler samen met de dwarsbalk1 bevestigingsmateriaal1 set kentekenplaathouders1 montagehandleiding Opmerking:alleen voor racen   De Y-pipe kit voor Audi TTRS 8J/RS3 8P met katalysator: diameter van 90mm tot 2 maal 70mmvolledig van hoge kwaliteit roestvrij staal 1.4301 (SS304)zonder katalysator1 aansluiting lambdasonde2 race hoofdkatalysatoren (100 cellen/inch)100% nauwkeurige pasvorm, gemakkelijk te vervangen door standaard onderdeelminder thermische belasting voor de turboladermeer vermogen door dynamische drukverminderingveel meer koppelgeschikt voor Audi TTRS 8J en Audi RS3 8Pcompatibel met de originele hoofdkatalysatoren

Intercooler Upgrade Kit: The high performance intercooler has the following net dimensions (535mm x 260mm x 95mm) and thus offers a 62.5% larger flow area and 94% more charge air volume compared to the original intercooler. The new Competition high-performance mesh still provides sufficient airflow to the adjacent components, such as the water cooler, and is also very lightweight. The end boxes of the intercooler are made of cast aluminum and were optimized under flow analyses in the CAD system. This intercooler has hevorragende cooling properties and is just right for racing. The intercooler and the original crossmember form a stable unit and weighs less than 10kg thanks to the new Competition high-performance mesh. The assembly is done at the original mounting points and is easy to perform(1:1 exchange). An optimal cooling of the charged air with a significant increase in performance! OEM intercooler: cooling surface 856cm² / charge air volume 6,8LWT EVO 1 Performance: cooling surface 856cm² / charge air volume 9,4LWT EVO 2 Competition: cooling surface 1391cm² / charge air volume 13,2LWT EVO 3 Competition: cooling surface 1890cm² / charge air volume 16,5L All our products are subject to constant qualitative monitoring. Scope of delivery:1 intercooler together with the cross bar1 license plate holder 20° inclined1 assembly instruction Remark:only for racing   The Y-pipe for Audi TTRS 8J/RS3 8P diameter from 90mm to 2 times 70mmcomplete high quality stainless steel 1.4301 (SS304)without pre-cat1 lambda probe connection100% accurate fit, easy to replace with stock partless thermal load for the turbochargermore power due to back pressure reductionmuch more torquesuitable for Audi TTRS 8J as well as Audi RS3 8Pcompatible with the original main catalysts

Audi RS3 8V Sportback/Sedan 294KW met ACC 08/2017=> Wagner Competition Pakket: Intercooler EVO 3+ Downpipe zonder kat. Intercooler Upgrade Kit: The high performance intercooler has the following net dimensions (515mm x 367mm x 95mm [stepped] = 16.5L), providing an 84% larger flow area, as well as 101% more intercooler volume compared to the original intercooler. The newly developed Competition high-performance mesh grants sufficient airflow to the adjacent components, such as the water cooler. It is a high quality Tube Fin net with internal turbulators. The end boxes of the charge air cooler are made of cast aluminum and were optimized under flow analyses in the CFD system. With the help of incorporated air baffles, in the inlet, a uniform filling of the intercooler is ensured. The result is excellent cooling properties with minimal backpressure. Thus, this kit is ideal for racing. In addition, all our intercoolers have an anti-corrosion coating with heat conduction properties. This guarantees permanent and optimal cooling with a significant increase in performance. The intercooler and the crossbar form a stable unit and weighs, thanks to the new Competition high-performance mesh, only 14.3kg. The assembly is done at the original mounting points and is easy to perform (1:1 exchange). Tested up to 6 bar and pressure stable. All our products are subject to constant qualitative monitoring.   The Wagner-Tuning Downpipe Kit for: high quality stainless steel cast 1.4301 (SS304)without pre-cat for maximum performancecomplete 2x Ø70mmCAD-Designed and flow optimized2 lambda probe connections100% accurate fit, easy to replace with stock partless thermal load for the turbochargermore power due to dynamic pressure reductionmuch more torquesuitable for Audi TTRS 8S as well as Audi RS3 8V facelift modelscompatible with the original afterkat pipes

Audi RS3 8V Sportback/Sedan 294KW met ACC 2017=> Wagner Competition Pakket: Intercooler EVO 3+ Downpipe incl. kat pipes Intercooler Upgrade Kit: The high performance intercooler has the following net dimensions (515mm x 367mm x 95mm [stepped] = 16.5L), providing 84% more flow area, and 101% more intercooler volume compared to the original intercooler. The newly developed Competition high-performance mesh grants sufficient airflow to the adjacent components, such as the water cooler. It is a high quality Tube Fin mesh with internal turbulators. The end boxes of the charge air cooler are made of cast aluminum and were optimized under flow analyses in the CFD system. With the help of incorporated air baffles, in the inlet, a uniform filling of the intercooler is ensured. The result is excellent cooling properties with minimal backpressure. Thus, this kit is ideal for racing. In addition, all our intercoolers have an anti-corrosion coating with heat conduction properties. This guarantees permanent and optimal cooling with a significant increase in performance. The intercooler and the crossbar form a stable unit and weighs, thanks to the new Competition high-performance mesh, only 14.3kg. The assembly is done at the original mounting points and is easy to perform (1:1 exchange). Tested up to 6 bar and pressure stable. All our products are subject to constant qualitative monitoring.   The Wagner-Tuning Downpipe Kit: high quality stainless steel casting 1.4301 (SS304)without pre-cat for maximum performancecomplete 2x Ø70mmCAD-Designed and flow optimized2 lambda probe connections100% accurate fit, easy to replace with stock partless thermal load for the turbochargermore power due to dynamic pressure reductionmuch more torquesuitable for Audi TTRS 8S as well as Audi RS3 8V facelift modelsincluding aftertubes with 2x 200CPSI EU6 metal racing catalysts

Audi RS3 8V Sportback/Sedan 294KW met ACC 2017=> voor upgrade 600HP+ Wagner Competition Pakket: Intercooler EVO 3+ Downpipe incl. kat pipes. Intercooler Upgrade Kit: The high performance intercooler has the following net dimensions (515mm x 367mm x 95mm [stepped] = 16.5L), providing 84% more flow area, as well as 101% more intercooler volume compared to the original intercooler. The newly developed Competition high-performance mesh grants sufficient airflow to the adjacent components, such as the water cooler. It is a high quality Tube Fin net with internal turbulators. The end boxes of the charge air cooler are made of cast aluminum and were optimized under flow analyses in the CFD system. With the help of incorporated air baffles, in the inlet, a uniform filling of the intercooler is ensured. The result is excellent cooling properties with minimal backpressure. Thus, this kit is ideal for racing. In addition, all our intercoolers have an anti-corrosion coating with heat conduction properties. This guarantees permanent and optimal cooling with a significant increase in performance. The intercooler and the crossbar form a stable unit and weighs, thanks to the new Competition high-performance mesh, only 14.3kg. The assembly is done at the original mounting points and is easy to perform (1:1 exchange). Tested up to 6 bar and pressure stable. All our products are subject to constant qualitative monitoring.   The Wagner-Tuning Downpipe Kit: high quality stainless steel casting 1.4301 (SS304)without pre-cat for maximum performancecomplete 2x Ø70mmCAD-Designed and flow optimized2 lambda probe connections100% accurate fit, easy to replace with stock partless thermal load for the turbochargermore power due to dynamic pressure reductionmuch more torquesuitable for Audi TTRS 8S as well as Audi RS3 8V facelift modelsincluding aftertubes with 2x 200CPSI EU6 metal racing catalysts

Audi RS3 8V Sportback/Sedan 294KW zonder ACC 08/2017=> voor upgrade 600PK+ Wagner Competition Pakket: Intercooler EVO 3+ Downpipe incl. kat pipes. Intercooler Upgrade Kit 200001081 The high performance intercooler has the following mesh dimensions (515mm x 367mm x 95mm [stepped] = 16.5L), providing 84% more flow area, as well as 101% more charge air volume compared to the original intercooler. The newly developed Competition high-performance mesh grants sufficient airflow to the adjacent components, such as the water cooler. It is a high quality Tube Fin mesh with internal turbulators. The end boxes of the charge air cooler are made of cast aluminum and have been optimized under flow analyses in the CFD system. With the help of incorporated air baffles, in the inlet, a uniform filling of the intercooler is ensured. The result is excellent cooling properties with minimal backpressure. Thus, this kit is ideal for racing. In addition, all our intercoolers have an anti-corrosion coating with heat conduction properties. This guarantees permanent and optimal cooling with a significant increase in performance. The intercooler and the crossbar form a stable unit and weighs, thanks to the new Competition high-performance mesh, only 14.3kg. The assembly is done at the original mounting points and is easy to perform (1:1 exchange). Tested up to 6 bar and pressure stable. All our products are subject to constant qualitative monitoring.   The Wagner-Tuning Downpipe Kit for Audi RS3 8V 500001028.Kat high quality stainless steel casting 1.4301 (SS304)without pre-cat for maximum performancecomplete 2x Ø70mmCAD designed and flow optimized2 lambda probe connections100% accurate fit, easy to replace with stock partless thermal load for the turbochargermore power due to dynamic pressure reductionmuch more torquesuitable for Audi TTRS 8S as well as Audi RS3 8V facelift modelsincluding aftertubes with 2x 200CPSI EU6 metal racing catalysts

Audi RS3 8V Sportback/Sedan 294KW zonder ACC 2017=> Wagner Competition Pakket: Intercooler EVO 3+ Downpipe zonder kat. Intercooler Upgrade Kit: The high performance intercooler has the following net dimensions (515mm x 367mm x 95mm [stepped] = 16.5L), providing an 84% larger flow area, as well as 101% more intercooler volume compared to the original intercooler. The newly developed Competition high-performance mesh grants sufficient airflow to the adjacent components, such as the water cooler. It is a high quality Tube Fin net with internal turbulators. The end boxes of the charge air cooler are made of cast aluminum and have been optimized under flow analyses in the CFD system. With the help of incorporated air baffles, in the inlet, a uniform filling of the intercooler is ensured. The result is excellent cooling properties with minimal backpressure. Thus, this kit is ideal for racing. In addition, all our intercoolers have an anti-corrosion coating with heat conduction properties. This guarantees permanent and optimal cooling with a significant increase in performance. The intercooler and the crossbar form a stable unit and weighs, thanks to the new Competition high-performance mesh, only 14.3kg. The assembly is done at the original mounting points and is easy to perform (1:1 exchange). Tested up to 6 bar and pressure stable. All our products are subject to constant qualitative monitoring.   The Wagner-Tuning Downpipe Kit: high quality stainless steel casting 1.4301 (SS304)without pre-cat for maximum performancecomplete 2x Ø70mmCAD-Designed and flow optimized2 lambda probe connections100% accurate fit, easy to replace with stock partless thermal load for the turbochargermore power due to dynamic pressure reductionmuch more torquesuitable for Audi TTRS 8S as well as Audi RS3 8V facelift modelscompatible with the original afterkat pipes

Audi RS3 8V Sportback/Sedan 294KW zonder ACC 2017=> Wagner Competition Pakket: Intercooler EVO 3+ Downpipe incl. kat pipes Intercooler Upgrade Kit: The high performance intercooler has the following net dimensions (515mm x 367mm x 95mm [stepped] = 16,5L), offering 84% more flow area, as well as 101% more intercooler volume compared to the original intercooler. The newly developed Competition high-performance mesh grants sufficient airflow to the adjacent components, such as the water cooler. It is a high quality Tube Fin net with internal turbulators. The end boxes of the charge air cooler are made of cast aluminum and were optimized under flow analyses in the CFD system. With the help of incorporated air baffles, in the inlet, a uniform filling of the intercooler is ensured. The result is excellent cooling properties with minimal backpressure. Thus, this kit is ideal for racing. In addition, all our intercoolers have an anti-corrosion coating with heat conduction properties. This guarantees permanent and optimal cooling with a significant increase in performance. The intercooler and the crossbar form a stable unit and weighs, thanks to the new Competition high-performance mesh, only 14.3kg. The assembly is done at the original mounting points and is easy to perform (1:1 exchange). Tested up to 6 bar and pressure stable. All our products are subject to constant qualitative monitoring.   The Wagner-Tuning Downpipe Kit: high quality stainless steel casting 1.4301 (SS304)without pre-cat for maximum performancecomplete 2x Ø70mmCAD-Designed and flow optimized2 lambda probe connections100% accurate fit, easy to replace with stock partless thermal load for the turbochargermore power due to dynamic pressure reductionmuch more torquesuitable for Audi TTRS 8S as well as Audi RS3 8V facelift modelsincluding aftertubes with 2x 200CPSI EU6 metal racing catalysts

Audi RS3 8V 294KW/400HP (2017-2020)Audi TTRS 8S 294KW/400HP (2016-2020)Audi RSQ3 F3 294KW/400HP (2019-2020) ENGINE CODE: DAZA/DNWA The new WagnerTuning air intake system is a direct replacement for the standard system and precisely eliminates the weaknesses of the standard system.The flow-optimized carbon cover and Ø89mm carbon tube provide the best possible flow characteristics without unnecessarily blocking or swirling the intake air. Using it increases air mass flow by 32%, improving engine response and performance. In addition, the new WagnerTuning air intake system is a real eye-catcher in the engine compartment thanks to its visual appearance and high-quality workmanship. delivery:1 carbon airbox cover1 Ø89 mm carbon intake pipe2 silicone hoses (black)1 mounting material1 installation instructions

Competition water cooler kit for Audi RS4 B9 / RS5 F5 Plug and Play suitable for the following models: Audi RS4 B9 331KW/450hp from 2017Audi RS5 F5 331KW/450hp from 2017 The 2.9L V6 biturbo engine of the Audi RS4 / RS5 is equipped with an indirect charge air cooling circuit. As a result, the cooling process of the charge air is not realized (as usual) with the ambient air as a cooling medium, but is carried out with the help of a separate cooling water circuit. A reduction in the cooling water temperature can therefore be directly equated with improved charge air cooling performance. This is exactly where the advantages of the WAGNERTUNING Upgrade water cooler come into play.The newly developed competition racing mesh of the WAGNERTUNING high-performance water cooler increases the cooling volume of the standard water cooler by a total of 55%. The ratio between inner and outer cooling surface generates maximum heat transfer and at the same time allows the adjacent components (e.g. the engine water cooler behind it) sufficient air flow for its heat exchange. Furthermore, the water coolers are equipped with a heat-conducting anti-corrosion coating to ensure a long-lasting cooling effect. The installation of the system is also uncomplicated and plug & play with the help of our installation instructions. Dimensions OEM water cooler:720 mm x 485 mm x 25 mmV = 8.73 litersA = 3492 cm² WT water cooler dimensions:690 mm x 490 mm x 40 mmV = 13.52 litersA = 3381 cm