K & N Engineering Inc. "manufacturer of the best air filters" has been the market leader in air filter technology since the start in 1969 for automotive, motorcycle, marine, industrial and military applications. The head office and production are located in Riverside CA (USA) with branches in Great Britain and Eindhoven (NL).
In order to ensure that K & N can continue to guarantee the utmost in the area of air filter technology, K & N continually invests in product development and test procedures. The R & D centers are equipped with "Dyno" power banks that ensure that every K & N air filter is designed to get the most out of your engine with the same filter effect, so the engine is optimally protected.
Benefits of a K & N air filter:
- Performance increase.
- Economical and environmentally friendly.
- Wide assortment.
- Experience from motorsport.
K&N Aircharger Kit Dodge Ram, V8-4.7L 2008-2012 The K&N AirCharger air intake system replaces the restrictive factory air filter and air intake housing. K&N air intakes are designed to dramatically reduce air intake restriction as well as smooth and straighten air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engines RPM range. The air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the original air box space. Air is directed through an aerodynamically engineered intake tube into the engines throttle body for a guaranteed power gain. The tube accommodates the factory crank case vent hose and air inlet temperature sensor as well as the blow off valve. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install, usually in 90 minutes or less using your vehicles existing factory mounting points. The tools needed are a screwdriver, ratchet set and an Allen wrench. This air intake cannot be sold in California. It is not legal for use in California or other states adopting California emission standards. - Guaranteed horsepower gain - Designed to improve throttle response and engine sound - Free-flowing high density polyethylene tube - Replaces entire factory air intake system - K&N Million Mile Limited Warranty - Lasts up to 100,000 miles before service is required (depending on driving conditions) - Easy to install, usually in 90 minutes or less
K&N Aircharger Kit Fiat 500, Abarth L4-1.4L, Turbo 2013-2014 The K&N AirCharger air intake system replaces the restrictive factory air filter and air intake housing. K&N air intakes are designed to dramatically reduce air intake restriction as well as smooth and straighten air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engines RPM range. The air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the original air box space. Air is directed through an aerodynamically engineered intake tube into the engines throttle body for a guaranteed power gain. The tube accommodates the factory crank case vent hose and air inlet temperature sensor as well as the blow off valve. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install, usually in 90 minutes or less using your vehicles existing factory mounting points. The tools needed are a screwdriver, ratchet set and an Allen wrench. This air intake cannot be sold in California. It is not legal for use in California or other states adopting California emission standards. - Guaranteed horsepower gain - Designed to improve throttle response and engine sound - Free-flowing high density polyethylene tube - Replaces entire factory air intake system - K&N Million Mile Limited Warranty - Lasts up to 100,000 miles before service is required (depending on driving conditions) - Easy to install, usually in 90 minutes or less
K&N Aircharger Kit Ford Bronco & F150, F250, F350 4.8/5.0/5.8/7.5L V8 1996-1997 (63-1014) The K&N AirCharger air intake system replaces the restrictive factory air filter and air intake housing. K&N air intakes are designed to dramatically reduce air intake restriction as well as smooth and straighten air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engines RPM range. The air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the original air box space. Air is directed through an aerodynamically engineered intake tube into the engines throttle body for a guaranteed power gain. The tube accommodates the factory crank case vent hose and air inlet temperature sensor as well as the blow off valve. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install, usually in 90 minutes or less using your vehicles existing factory mounting points. The tools needed are a screwdriver, ratchet set and an Allen wrench. This air intake cannot be sold in California. It is not legal for use in California or other states adopting California emission standards. - Guaranteed horsepower gain - Designed to improve throttle response and engine sound - Free-flowing high density polyethylene tube - Replaces entire factory air intake system - K&N Million Mile Limited Warranty - Lasts up to 100,000 miles before service is required (depending on driving conditions) - Easy to install, usually in 90 minutes or less
K&N Aircharger Kit Ford Bronco 2.0 L4 Facelift 2021- & Ford Maverick 2.0 L4 2022- (63-2618) The K&N AirCharger air intake system replaces the restrictive factory air filter and air intake housing. K&N air intakes are designed to dramatically reduce air intake restriction as well as smooth and straighten air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engines RPM range. The air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the original air box space. Air is directed through an aerodynamically engineered intake tube into the engines throttle body for a guaranteed power gain. The tube accommodates the factory crank case vent hose and air inlet temperature sensor as well as the blow off valve. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install, usually in 90 minutes or less using your vehicles existing factory mounting points. The tools needed are a screwdriver, ratchet set and an Allen wrench. This air intake cannot be sold in California. It is not legal for use in California or other states adopting California emission standards. - Guaranteed horsepower gain - Designed to improve throttle response and engine sound - Free-flowing high density polyethylene tube - Replaces entire factory air intake system - K&N Million Mile Limited Warranty - Lasts up to 100,000 miles before service is required (depending on driving conditions) - Easy to install, usually in 90 minutes or less
K&N Aircharger Ford Mustang Bronco 2.3L L4 Facelift 2021- (63-2620) The K&N AirCharger air intake system replaces the restrictive factory air filter and air intake housing on some Ford Mustang models. K&N air intakes are designed to dramatically reduce air intake restriction as well as smooth and straighten air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine’s RPM range. The air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the original air box space. Air is directed through an aerodynamically engineered intake tube into the engine’s throttle body for a guaranteed power gain. The tube accommodates the factory crank case vent hose and air inlet temperature sensor as well as the blow off valve. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install, usually in 90 minutes or less using your vehicle’s existing factory mounting points. The tools needed are a screwdriver, ratchet set and an Allen wrench. This air intake cannot be sold in California. It is not legal for use in California or other states adopting California emission standards. - Guaranteed horsepower gain - Designed to improve throttle response and engine sound - Free-flowing high density polyethylene tube - Replaces entire factory air intake system - K&N Million Mile Limited Warranty - Lasts up to 100,000 miles before service is required (depending on driving conditions) - Easy to install, usually in 90 minutes or less
K&N Aircharger Kit Ford Bronco Raptor 3.0L EcoBoost V6 2023- (63-2625) The K&N AirCharger air intake system replaces the restrictive factory air filter and air intake housing. K&N air intakes are designed to dramatically reduce air intake restriction as well as smooth and straighten air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engines RPM range. The air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the original air box space. Air is directed through an aerodynamically engineered intake tube into the engines throttle body for a guaranteed power gain. The tube accommodates the factory crank case vent hose and air inlet temperature sensor as well as the blow off valve. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install, usually in 90 minutes or less using your vehicles existing factory mounting points. The tools needed are a screwdriver, ratchet set and an Allen wrench. This air intake cannot be sold in California. It is not legal for use in California or other states adopting California emission standards. - Guaranteed horsepower gain - Designed to improve throttle response and engine sound - Free-flowing high density polyethylene tube - Replaces entire factory air intake system - K&N Million Mile Limited Warranty - Lasts up to 100,000 miles before service is required (depending on driving conditions) - Easy to install, usually in 90 minutes or less
K&N Aircharger Kit Ford Bronco V6 2.7 Facelift 2021- (63-2619) The K&N AirCharger air intake system replaces the restrictive factory air filter and air intake housing. K&N air intakes are designed to dramatically reduce air intake restriction as well as smooth and straighten air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engines RPM range. The air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the original air box space. Air is directed through an aerodynamically engineered intake tube into the engines throttle body for a guaranteed power gain. The tube accommodates the factory crank case vent hose and air inlet temperature sensor as well as the blow off valve. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install, usually in 90 minutes or less using your vehicles existing factory mounting points. The tools needed are a screwdriver, ratchet set and an Allen wrench. This air intake cannot be sold in California. It is not legal for use in California or other states adopting California emission standards. - Guaranteed horsepower gain - Designed to improve throttle response and engine sound - Free-flowing high density polyethylene tube - Replaces entire factory air intake system - K&N Million Mile Limited Warranty - Lasts up to 100,000 miles before service is required (depending on driving conditions) - Easy to install, usually in 90 minutes or less
K&N 63 Series AirCharger High Performance Air Intake Kit. A look under the hood of modern cars makes clear that the air flow is restricted by unnecessary bends and kinks. This robs a vehicle of its natural horsepower. Air flows the best in a straight line and is preferably not slowed down by the filter material. The K&N 63 Series Aircharger Kit virtually eliminates the air intake restrictions in the air flow to the engine. The aerodynamically designed tube forces a massive amount of air into the engine, which translates into more power. This kit has the largest conical High- Flow air filter that fits in the engine compartment and still uses the factory holes and mounting points. The filter is isolated from the engine by a thermal shield designed to reduce the temperature of the air taken in by the motor. This provides better performance. The air filter is attached to a rotationally molded tube, braided with High Density Polyethylene. This reduces the turbulence and accelerates the air flow into the engine. With this system, you get the best High-Flow intake system available. With a K&N kit you optimize the air supply to your engine. This ensures better performance and a better engine sound. Because of this feature many people call it a power filter. Benefits of a K&N 63 Series AirCharger High Performance Air Intake Kit.: 1. More power, more torque and better throttle response. 2. The kit includes all needed brackets, hoses and attachments. 3. Water repellent. 4. Washable & reusable. 5. 4 layers of oiled cotton for maximum protection. The oil layer works as a magnet. Dust and dirt is stopped on the outside even though there is 40% more air forced into the engine. 6. 600.000 miles warranty. 7. Only clean every 50.000 to 100.000 miles. 8. The kit features a clear manual. 9. All metal parts are coated for long life. Assembly: You can easily install the K&N AirCharger kit in the car and take it out just as easy. On YouTube you can find numerous instructional videos to assist you. If you still want to have assistance when installing your K&N kit you can always go to your dealer.
K&N Aircharger Kit Ford F150 (Raptor)/Expedition/Navigator 3.5 2017- (63-2599) The K&N AirCharger air intake system replaces the restrictive factory air filter and air intake housing. K&N air intakes are designed to dramatically reduce air intake restriction as well as smooth and straighten air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine's RPM range. The air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the original air box space. Air is directed through an aerodynamically engineered intake tube into the engine's throttle body for a guaranteed power gain. The tube accommodates the factory crank case vent hose and air inlet temperature sensor as well as the blow off valve. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install, usually in 90 minutes or less using your vehicle's existing factory mounting points. The tools needed are a screwdriver, ratchet set and an Allen wrench. This air intake cannot be sold in California. It is not legal for use in California or other states adopting California emission standards. - Guaranteed horsepower gain - Designed to improve throttle response and engine sound - Free-flowing high density polyethylene tube - Replaces entire factory air intake system - K&N Million Mile Limited Warranty - Lasts up to 100,000 miles before service is required (depending on driving conditions) - Easy to install, usually in 90 minutes or less
K&N Aircharger Ford F150 V6 2.7 2015-2016 (63-2593) The K&N AirCharger air intake system replaces the restrictive factory air filter and air intake housing. K&N air intakes are designed to dramatically reduce air intake restriction as well as smooth and straighten air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engines RPM range. The air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the original air box space. Air is directed through an aerodynamically engineered intake tube into the engines throttle body for a guaranteed power gain. The tube accommodates the factory crank case vent hose and air inlet temperature sensor as well as the blow off valve. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install, usually in 90 minutes or less using your vehicles existing factory mounting points. The tools needed are a screwdriver, ratchet set and an Allen wrench. This air intake cannot be sold in California. It is not legal for use in California or other states adopting California emission standards. - Guaranteed horsepower gain - Designed to improve throttle response and engine sound - Free-flowing high density polyethylene tube - Replaces entire factory air intake system - K&N Million Mile Limited Warranty - Lasts up to 100,000 miles before service is required (depending on driving conditions) - Easy to install, usually in 90 minutes or less
K&N Aircharger Kit Ford F150 excl. Turbo 2015-2016 (63-2596) The K&N AirCharger air intake system replaces the restrictive factory air filter and air intake housing. K&N air intakes are designed to dramatically reduce air intake restriction as well as smooth and straighten air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engines RPM range. The air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the original air box space. Air is directed through an aerodynamically engineered intake tube into the engines throttle body for a guaranteed power gain. The tube accommodates the factory crank case vent hose and air inlet temperature sensor as well as the blow off valve. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install, usually in 90 minutes or less using your vehicles existing factory mounting points. The tools needed are a screwdriver, ratchet set and an Allen wrench. This air intake cannot be sold in California. It is not legal for use in California or other states adopting California emission standards. - Guaranteed horsepower gain - Designed to improve throttle response and engine sound - Free-flowing high density polyethylene tube - Replaces entire factory air intake system - K&N Million Mile Limited Warranty - Lasts up to 100,000 miles before service is required (depending on driving conditions) - Easy to install, usually in 90 minutes or less
K&N Aircharger Kit Ford F150 5.0 V8 2015- (63-2591) The K&N AirCharger air intake system replaces the restrictive factory air filter and air intake housing. K&N air intakes are designed to dramatically reduce air intake restriction as well as smooth and straighten air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engines RPM range. The air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the original air box space. Air is directed through an aerodynamically engineered intake tube into the engines throttle body for a guaranteed power gain. The tube accommodates the factory crank case vent hose and air inlet temperature sensor as well as the blow off valve. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install, usually in 90 minutes or less using your vehicles existing factory mounting points. The tools needed are a screwdriver, ratchet set and an Allen wrench. This air intake cannot be sold in California. It is not legal for use in California or other states adopting California emission standards. - Guaranteed horsepower gain - Designed to improve throttle response and engine sound - Free-flowing high density polyethylene tube - Replaces entire factory air intake system - K&N Million Mile Limited Warranty - Lasts up to 100,000 miles before service is required (depending on driving conditions) - Easy to install, usually in 90 minutes or less
K&N Aircharger Kit Ford F150 5.0 V8 Facelift 2021- (63-2616) The K&N AirCharger air intake system replaces the restrictive factory air filter and air intake housing. K&N air intakes are designed to dramatically reduce air intake restriction as well as smooth and straighten air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engines RPM range. The air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the original air box space. Air is directed through an aerodynamically engineered intake tube into the engines throttle body for a guaranteed power gain. The tube accommodates the factory crank case vent hose and air inlet temperature sensor as well as the blow off valve. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install, usually in 90 minutes or less using your vehicles existing factory mounting points. The tools needed are a screwdriver, ratchet set and an Allen wrench. This air intake cannot be sold in California. It is not legal for use in California or other states adopting California emission standards. - Guaranteed horsepower gain - Designed to improve throttle response and engine sound - Free-flowing high density polyethylene tube - Replaces entire factory air intake system - K&N Million Mile Limited Warranty - Lasts up to 100,000 miles before service is required (depending on driving conditions) - Easy to install, usually in 90 minutes or less
K&N Aircharger Ford F150 Ecoboost V6 3.5 Turbo 2015-2016 (63-2592) The K&N AirCharger air intake system replaces the restrictive factory air filter and air intake housing. K&N air intakes are designed to dramatically reduce air intake restriction as well as smooth and straighten air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engines RPM range. The air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the original air box space. Air is directed through an aerodynamically engineered intake tube into the engines throttle body for a guaranteed power gain. The tube accommodates the factory crank case vent hose and air inlet temperature sensor as well as the blow off valve. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install, usually in 90 minutes or less using your vehicles existing factory mounting points. The tools needed are a screwdriver, ratchet set and an Allen wrench. This air intake cannot be sold in California. It is not legal for use in California or other states adopting California emission standards. - Guaranteed horsepower gain - Designed to improve throttle response and engine sound - Free-flowing high density polyethylene tube - Replaces entire factory air intake system - K&N Million Mile Limited Warranty - Lasts up to 100,000 miles before service is required (depending on driving conditions) - Easy to install, usually in 90 minutes or less
K&N Aircharger Kit Ford F150 V6 3.5/2.7 Facelift 2021- (63-2617) The K&N AirCharger air intake system replaces the restrictive factory air filter and air intake housing. K&N air intakes are designed to dramatically reduce air intake restriction as well as smooth and straighten air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engines RPM range. The air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the original air box space. Air is directed through an aerodynamically engineered intake tube into the engines throttle body for a guaranteed power gain. The tube accommodates the factory crank case vent hose and air inlet temperature sensor as well as the blow off valve. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install, usually in 90 minutes or less using your vehicles existing factory mounting points. The tools needed are a screwdriver, ratchet set and an Allen wrench. This air intake cannot be sold in California. It is not legal for use in California or other states adopting California emission standards. - Guaranteed horsepower gain - Designed to improve throttle response and engine sound - Free-flowing high density polyethylene tube - Replaces entire factory air intake system - K&N Million Mile Limited Warranty - Lasts up to 100,000 miles before service is required (depending on driving conditions) - Easy to install, usually in 90 minutes or less
K&N 63 Series AirCharger High Performance Air Intake Kit. A look under the hood of modern cars makes clear that the air flow is restricted by unnecessary bends and kinks. This robs a vehicle of its natural horsepower. Air flows the best in a straight line and is preferably not slowed down by the filter material. The K&N 63 Series Aircharger Kit virtually eliminates the air intake restrictions in the air flow to the engine. The aerodynamically designed tube forces a massive amount of air into the engine, which translates into more power. This kit has the largest conical High- Flow air filter that fits in the engine compartment and still uses the factory holes and mounting points. The filter is isolated from the engine by a thermal shield designed to reduce the temperature of the air taken in by the motor. This provides better performance. The air filter is attached to a rotationally molded tube, braided with High Density Polyethylene. This reduces the turbulence and accelerates the air flow into the engine. With this system, you get the best High-Flow intake system available. With a K&N kit you optimize the air supply to your engine. This ensures better performance and a better engine sound. Because of this feature many people call it a power filter. Benefits of a K&N 63 Series AirCharger High Performance Air Intake Kit.: 1. More power, more torque and better throttle response. 2. The kit includes all needed brackets, hoses and attachments. 3. Water repellent. 4. Washable & reusable. 5. 4 layers of oiled cotton for maximum protection. The oil layer works as a magnet. Dust and dirt is stopped on the outside even though there is 40% more air forced into the engine. 6. 600.000 miles warranty. 7. Only clean every 50.000 to 100.000 miles. 8. The kit features a clear manual. 9. All metal parts are coated for long life. Assembly: You can easily install the K&N AirCharger kit in the car and take it out just as easy. On YouTube you can find numerous instructional videos to assist you. If you still want to have assistance when installing your K&N kit you can always go to your dealer.
K&N 63 Series AirCharger High Performance Air Intake Kit. A look under the hood of modern cars makes clear that the air flow is restricted by unnecessary bends and kinks. This robs a vehicle of its natural horsepower. Air flows the best in a straight line and is preferably not slowed down by the filter material. The K&N 63 Series Aircharger Kit virtually eliminates the air intake restrictions in the air flow to the engine. The aerodynamically designed tube forces a massive amount of air into the engine, which translates into more power. This kit has the largest conical High- Flow air filter that fits in the engine compartment and still uses the factory holes and mounting points. The filter is isolated from the engine by a thermal shield designed to reduce the temperature of the air taken in by the motor. This provides better performance. The air filter is attached to a rotationally molded tube, braided with High Density Polyethylene. This reduces the turbulence and accelerates the air flow into the engine. With this system, you get the best High-Flow intake system available. With a K&N kit you optimize the air supply to your engine. This ensures better performance and a better engine sound. Because of this feature many people call it a power filter. Benefits of a K&N 63 Series AirCharger High Performance Air Intake Kit.: 1. More power, more torque and better throttle response. 2. The kit includes all needed brackets, hoses and attachments. 3. Water repellent. 4. Washable & reusable. 5. 4 layers of oiled cotton for maximum protection. The oil layer works as a magnet. Dust and dirt is stopped on the outside even though there is 40% more air forced into the engine. 6. 600.000 miles warranty. 7. Only clean every 50.000 to 100.000 miles. 8. The kit features a clear manual. 9. All metal parts are coated for long life. Assembly: You can easily install the K&N AirCharger kit in the car and take it out just as easy. On YouTube you can find numerous instructional videos to assist you. If you still want to have assistance when installing your K&N kit you can always go to your dealer.
K&N Aircharger Kit Ford Fusion 1.6 2013-2015 The K&N AirCharger air intake system replaces the restrictive factory air filter and air intake housing. K&N air intakes are designed to dramatically reduce air intake restriction as well as smooth and straighten air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engines RPM range. The air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the original air box space. Air is directed through an aerodynamically engineered intake tube into the engines throttle body for a guaranteed power gain. The tube accommodates the factory crank case vent hose and air inlet temperature sensor as well as the blow off valve. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install, usually in 90 minutes or less using your vehicles existing factory mounting points. The tools needed are a screwdriver, ratchet set and an Allen wrench. This air intake cannot be sold in California. It is not legal for use in California or other states adopting California emission standards. - Guaranteed horsepower gain - Designed to improve throttle response and engine sound - Free-flowing high density polyethylene tube - Replaces entire factory air intake system - K&N Million Mile Limited Warranty - Lasts up to 100,000 miles before service is required (depending on driving conditions) - Easy to install, usually in 90 minutes or less
K&N Aircharger Kit Ford Mustang 2.3 2015 The K&N AirCharger air intake system replaces the restrictive factory air filter and air intake housing on some Ford Mustang models. K&N air intakes are designed to dramatically reduce air intake restriction as well as smooth and straighten air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine’s RPM range. The air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the original air box space. Air is directed through an aerodynamically engineered intake tube into the engine’s throttle body for a guaranteed power gain. The tube accommodates the factory crank case vent hose and air inlet temperature sensor as well as the blow off valve. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install, usually in 90 minutes or less using your vehicle’s existing factory mounting points. The tools needed are a screwdriver, ratchet set and an Allen wrench. This air intake cannot be sold in California. It is not legal for use in California or other states adopting California emission standards. - Guaranteed horsepower gain - Designed to improve throttle response and engine sound - Free-flowing high density polyethylene tube - Replaces entire factory air intake system - K&N Million Mile Limited Warranty - Lasts up to 100,000 miles before service is required (depending on driving conditions) - Easy to install, usually in 90 minutes or less
K&N Aircharger Kit Ford Mustang 2.3 2018- (63-2606) The K&N AirCharger air intake system replaces the restrictive factory air filter and air intake housing. K&N air intakes are designed to dramatically reduce air intake restriction as well as smooth and straighten air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engines RPM range. The air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the original air box space. Air is directed through an aerodynamically engineered intake tube into the engines throttle body for a guaranteed power gain. The tube accommodates the factory crank case vent hose and air inlet temperature sensor as well as the blow off valve. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install, usually in 90 minutes or less using your vehicles existing factory mounting points. The tools needed are a screwdriver, ratchet set and an Allen wrench. This air intake cannot be sold in California. It is not legal for use in California or other states adopting California emission standards. - Guaranteed horsepower gain - Designed to improve throttle response and engine sound - Free-flowing high density polyethylene tube - Replaces entire factory air intake system - K&N Million Mile Limited Warranty - Lasts up to 100,000 miles before service is required (depending on driving conditions) - Easy to install, usually in 90 minutes or less
K&N Aircharger Ford Mustang V6 3.7 2015- (57-2594) The K&N AirCharger air intake system replaces the restrictive factory air filter and air intake housing on some Ford Mustang models. K&N air intakes are designed to dramatically reduce air intake restriction as well as smooth and straighten air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine’s RPM range. The air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the original air box space. Air is directed through an aerodynamically engineered intake tube into the engine’s throttle body for a guaranteed power gain. The tube accommodates the factory crank case vent hose and air inlet temperature sensor as well as the blow off valve. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install, usually in 90 minutes or less using your vehicle’s existing factory mounting points. The tools needed are a screwdriver, ratchet set and an Allen wrench. This air intake cannot be sold in California. It is not legal for use in California or other states adopting California emission standards. - Guaranteed horsepower gain - Designed to improve throttle response and engine sound - Free-flowing high density polyethylene tube - Replaces entire factory air intake system - K&N Million Mile Limited Warranty - Lasts up to 100,000 miles before service is required (depending on driving conditions) - Easy to install, usually in 90 minutes or less
K&N 63 Series AirCharger High Performance Air Intake Kit. A look under the hood of modern cars makes clear that the air flow is restricted by unnecessary bends and kinks. This robs a vehicle of its natural horsepower. Air flows the best in a straight line and is preferably not slowed down by the filter material. The K&N 63 Series Aircharger Kit virtually eliminates the air intake restrictions in the air flow to the engine. The aerodynamically designed tube forces a massive amount of air into the engine, which translates into more power. This kit has the largest conical High- Flow air filter that fits in the engine compartment and still uses the factory holes and mounting points. The filter is isolated from the engine by a thermal shield designed to reduce the temperature of the air taken in by the motor. This provides better performance. The air filter is attached to a rotationally molded tube, braided with High Density Polyethylene. This reduces the turbulence and accelerates the air flow into the engine. With this system, you get the best High-Flow intake system available. With a K&N kit you optimize the air supply to your engine. This ensures better performance and a better engine sound. Because of this feature many people call it a power filter. Benefits of a K&N 63 Series AirCharger High Performance Air Intake Kit.: 1. More power, more torque and better throttle response. 2. The kit includes all needed brackets, hoses and attachments. 3. Water repellent. 4. Washable & reusable. 5. 4 layers of oiled cotton for maximum protection. The oil layer works as a magnet. Dust and dirt is stopped on the outside even though there is 40% more air forced into the engine. 6. 600.000 miles warranty. 7. Only clean every 50.000 to 100.000 miles. 8. The kit features a clear manual. 9. All metal parts are coated for long life. Assembly: You can easily install the K&N AirCharger kit in the car and take it out just as easy. On YouTube you can find numerous instructional videos to assist you. If you still want to have assistance when installing your K&N kit you can always go to your dealer.
K&N 63 Series AirCharger High Performance Air Intake Kit. A look under the hood of modern cars makes clear that the air flow is restricted by unnecessary bends and kinks. This robs a vehicle of its natural horsepower. Air flows the best in a straight line and is preferably not slowed down by the filter material. The K&N 63 Series Aircharger Kit virtually eliminates the air intake restrictions in the air flow to the engine. The aerodynamically designed tube forces a massive amount of air into the engine, which translates into more power. This kit has the largest conical High- Flow air filter that fits in the engine compartment and still uses the factory holes and mounting points. The filter is isolated from the engine by a thermal shield designed to reduce the temperature of the air taken in by the motor. This provides better performance. The air filter is attached to a rotationally molded tube, braided with High Density Polyethylene. This reduces the turbulence and accelerates the air flow into the engine. With this system, you get the best High-Flow intake system available. With a K&N kit you optimize the air supply to your engine. This ensures better performance and a better engine sound. Because of this feature many people call it a power filter. Benefits of a K&N 63 Series AirCharger High Performance Air Intake Kit.: 1. More power, more torque and better throttle response. 2. The kit includes all needed brackets, hoses and attachments. 3. Water repellent. 4. Washable & reusable. 5. 4 layers of oiled cotton for maximum protection. The oil layer works as a magnet. Dust and dirt is stopped on the outside even though there is 40% more air forced into the engine. 6. 600.000 miles warranty. 7. Only clean every 50.000 to 100.000 miles. 8. The kit features a clear manual. 9. All metal parts are coated for long life. Assembly: You can easily install the K&N AirCharger kit in the car and take it out just as easy. On YouTube you can find numerous instructional videos to assist you. If you still want to have assistance when installing your K&N kit you can always go to your dealer.
K&N Aircharger Kit Ford Mustang GT 2015-2016 The K&N AirCharger air intake system replaces the restrictive factory air filter and air intake housing on some Ford Mustang models. K&N air intakes are designed to dramatically reduce air intake restriction as well as smooth and straighten air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine’s RPM range. The air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the original air box space. Air is directed through an aerodynamically engineered intake tube into the engine’s throttle body for a guaranteed power gain. The tube accommodates the factory crank case vent hose and air inlet temperature sensor as well as the blow off valve. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install, usually in 90 minutes or less using your vehicle’s existing factory mounting points. The tools needed are a screwdriver, ratchet set and an Allen wrench. This air intake cannot be sold in California. It is not legal for use in California or other states adopting California emission standards. - Guaranteed horsepower gain - Designed to improve throttle response and engine sound - Free-flowing high density polyethylene tube - Replaces entire factory air intake system - K&N Million Mile Limited Warranty - Lasts up to 100,000 miles before service is required (depending on driving conditions) - Easy to install, usually in 90 minutes or less
K&N Aircharger Ford Mustang GT 5.0 2018 (63-2605) The K&N AirCharger air intake system replaces the restrictive factory air filter and air intake housing on some Ford Mustang models. K&N air intakes are designed to dramatically reduce air intake restriction as well as smooth and straighten air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine’s RPM range. The air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the original air box space. Air is directed through an aerodynamically engineered intake tube into the engine’s throttle body for a guaranteed power gain. The tube accommodates the factory crank case vent hose and air inlet temperature sensor as well as the blow off valve. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install, usually in 90 minutes or less using your vehicle’s existing factory mounting points. The tools needed are a screwdriver, ratchet set and an Allen wrench. This air intake cannot be sold in California. It is not legal for use in California or other states adopting California emission standards. - Guaranteed horsepower gain - Designed to improve throttle response and engine sound - Free-flowing high density polyethylene tube - Replaces entire factory air intake system - K&N Million Mile Limited Warranty - Lasts up to 100,000 miles before service is required (depending on driving conditions) - Easy to install, usually in 90 minutes or less
The K&N AirCharger air intake system replaces the restrictive factory air filter and air intake housing. K&N air intakes are designed to dramatically reduce air intake restriction as well as smooth and straighten air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engines RPM range. The air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the original air box space. Air is directed through an aerodynamically engineered intake tube into the engines throttle body for a guaranteed power gain. The tube accommodates the factory crank case vent hose and air inlet temperature sensor as well as the blow off valve. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install, usually in 90 minutes or less using your vehicles existing factory mounting points. The tools needed are a screwdriver, ratchet set and an Allen wrench. This air intake cannot be sold in California. It is not legal for use in California or other states adopting California emission standards. - Guaranteed horsepower gain - Designed to improve throttle response and engine sound - Free-flowing high density polyethylene tube - Replaces entire factory air intake system - K&N Million Mile Limited Warranty - Lasts up to 100,000 miles before service is required (depending on driving conditions)
The K&N AirCharger air intake system replaces the restrictive factory air filter and air intake housing. K&N air intakes are designed to dramatically reduce air intake restriction as well as smooth and straighten air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engines RPM range. The air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the original air box space. Air is directed through an aerodynamically engineered intake tube into the engines throttle body for a guaranteed power gain. The tube accommodates the factory crank case vent hose and air inlet temperature sensor as well as the blow off valve. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install, usually in 90 minutes or less using your vehicles existing factory mounting points. The tools needed are a screwdriver, ratchet set and an Allen wrench. This air intake cannot be sold in California. It is not legal for use in California or other states adopting California emission standards. - Guaranteed horsepower gain - Designed to improve throttle response and engine sound - Free-flowing high density polyethylene tube - Replaces entire factory air intake system - K&N Million Mile Limited Warranty - Lasts up to 100,000 miles before service is required (depending on driving conditions)
The K&N AirCharger air intake system replaces the restrictive factory air filter and air intake housing. K&N air intakes are designed to dramatically reduce air intake restriction as well as smooth and straighten air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engines RPM range. The air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the original air box space. Air is directed through an aerodynamically engineered intake tube into the engines throttle body for a guaranteed power gain. The tube accommodates the factory crank case vent hose and air inlet temperature sensor as well as the blow off valve. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install, usually in 90 minutes or less using your vehicles existing factory mounting points. The tools needed are a screwdriver, ratchet set and an Allen wrench. This air intake cannot be sold in California. It is not legal for use in California or other states adopting California emission standards. - Guaranteed horsepower gain - Designed to improve throttle response and engine sound - Free-flowing high density polyethylene tube - Replaces entire factory air intake system - K&N Million Mile Limited Warranty - Lasts up to 100,000 miles before service is required (depending on driving conditions)
K&N 63 Series AirCharger High Performance Air Intake Kit. A look under the hood of modern cars makes clear that the air flow is restricted by unnecessary bends and kinks. This robs a vehicle of its natural horsepower. Air flows the best in a straight line and is preferably not slowed down by the filter material. The K&N 63 Series Aircharger Kit virtually eliminates the air intake restrictions in the air flow to the engine. The aerodynamically designed tube forces a massive amount of air into the engine, which translates into more power. This kit has the largest conical High- Flow air filter that fits in the engine compartment and still uses the factory holes and mounting points. The filter is isolated from the engine by a thermal shield designed to reduce the temperature of the air taken in by the motor. This provides better performance. The air filter is attached to a rotationally molded tube, braided with High Density Polyethylene. This reduces the turbulence and accelerates the air flow into the engine. With this system, you get the best High-Flow intake system available. With a K&N kit you optimize the air supply to your engine. This ensures better performance and a better engine sound. Because of this feature many people call it a power filter. Benefits of a K&N 63 Series AirCharger High Performance Air Intake Kit.: 1. More power, more torque and better throttle response. 2. The kit includes all needed brackets, hoses and attachments. 3. Water repellent. 4. Washable & reusable. 5. 4 layers of oiled cotton for maximum protection. The oil layer works as a magnet. Dust and dirt is stopped on the outside even though there is 40% more air forced into the engine. 6. 600.000 miles warranty. 7. Only clean every 50.000 to 100.000 miles. 8. The kit features a clear manual. 9. All metal parts are coated for long life. Assembly: You can easily install the K&N AirCharger kit in the car and take it out just as easy. On YouTube you can find numerous instructional videos to assist you. If you still want to have assistance when installing your K&N kit you can always go to your dealer.
K&N 63 Series AirCharger High Performance Air Intake Kit. A look under the hood of modern cars makes clear that the air flow is restricted by unnecessary bends and kinks. This robs a vehicle of its natural horsepower. Air flows the best in a straight line and is preferably not slowed down by the filter material. The K&N 63 Series Aircharger Kit virtually eliminates the air intake restrictions in the air flow to the engine. The aerodynamically designed tube forces a massive amount of air into the engine, which translates into more power. This kit has the largest conical High- Flow air filter that fits in the engine compartment and still uses the factory holes and mounting points. The filter is isolated from the engine by a thermal shield designed to reduce the temperature of the air taken in by the motor. This provides better performance. The air filter is attached to a rotationally molded tube, braided with High Density Polyethylene. This reduces the turbulence and accelerates the air flow into the engine. With this system, you get the best High-Flow intake system available. With a K&N kit you optimize the air supply to your engine. This ensures better performance and a better engine sound. Because of this feature many people call it a power filter. Benefits of a K&N 63 Series AirCharger High Performance Air Intake Kit.: 1. More power, more torque and better throttle response. 2. The kit includes all needed brackets, hoses and attachments. 3. Water repellent. 4. Washable & reusable. 5. 4 layers of oiled cotton for maximum protection. The oil layer works as a magnet. Dust and dirt is stopped on the outside even though there is 40% more air forced into the engine. 6. 600.000 miles warranty. 7. Only clean every 50.000 to 100.000 miles. 8. The kit features a clear manual. 9. All metal parts are coated for long life. Assembly: You can easily install the K&N AirCharger kit in the car and take it out just as easy. On YouTube you can find numerous instructional videos to assist you. If you still want to have assistance when installing your K&N kit you can always go to your dealer.
K&N 63 Series AirCharger High Performance Air Intake Kit. A look under the hood of modern cars makes clear that the air flow is restricted by unnecessary bends and kinks. This robs a vehicle of its natural horsepower. Air flows the best in a straight line and is preferably not slowed down by the filter material. The K&N 63 Series Aircharger Kit virtually eliminates the air intake restrictions in the air flow to the engine. The aerodynamically designed tube forces a massive amount of air into the engine, which translates into more power. This kit has the largest conical High- Flow air filter that fits in the engine compartment and still uses the factory holes and mounting points. The filter is isolated from the engine by a thermal shield designed to reduce the temperature of the air taken in by the motor. This provides better performance. The air filter is attached to a rotationally molded tube, braided with High Density Polyethylene. This reduces the turbulence and accelerates the air flow into the engine. With this system, you get the best High-Flow intake system available. With a K&N kit you optimize the air supply to your engine. This ensures better performance and a better engine sound. Because of this feature many people call it a power filter. Benefits of a K&N 63 Series AirCharger High Performance Air Intake Kit.: 1. More power, more torque and better throttle response. 2. The kit includes all needed brackets, hoses and attachments. 3. Water repellent. 4. Washable & reusable. 5. 4 layers of oiled cotton for maximum protection. The oil layer works as a magnet. Dust and dirt is stopped on the outside even though there is 40% more air forced into the engine. 6. 600.000 miles warranty. 7. Only clean every 50.000 to 100.000 miles. 8. The kit features a clear manual. 9. All metal parts are coated for long life. Assembly: You can easily install the K&N AirCharger kit in the car and take it out just as easy. On YouTube you can find numerous instructional videos to assist you. If you still want to have assistance when installing your K&N kit you can always go to your dealer.
K&N Aircharger Kit Hyundai Sante Fe, L4-2.4L F/I, 2013-2015 The K&N AirCharger air intake system replaces the restrictive factory air filter and air intake housing. K&N air intakes are designed to dramatically reduce air intake restriction as well as smooth and straighten air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engines RPM range. The air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the original air box space. Air is directed through an aerodynamically engineered intake tube into the engines throttle body for a guaranteed power gain. The tube accommodates the factory crank case vent hose and air inlet temperature sensor as well as the blow off valve. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install, usually in 90 minutes or less using your vehicles existing factory mounting points. The tools needed are a screwdriver, ratchet set and an Allen wrench. This air intake cannot be sold in California. It is not legal for use in California or other states adopting California emission standards. - Guaranteed horsepower gain - Designed to improve throttle response and engine sound - Free-flowing high density polyethylene tube - Replaces entire factory air intake system - K&N Million Mile Limited Warranty - Lasts up to 100,000 miles before service is required (depending on driving conditions) - Easy to install, usually in 90 minutes or less
K&N Aircharger Kit Jeep Cherokee V6-3.2L 2014-2016 The K&N AirCharger air intake system replaces the restrictive factory air filter and air intake housing. K&N air intakes are designed to dramatically reduce air intake restriction as well as smooth and straighten air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engines RPM range. The air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the original air box space. Air is directed through an aerodynamically engineered intake tube into the engines throttle body for a guaranteed power gain. The tube accommodates the factory crank case vent hose and air inlet temperature sensor as well as the blow off valve. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install, usually in 90 minutes or less using your vehicles existing factory mounting points. The tools needed are a screwdriver, ratchet set and an Allen wrench. This air intake cannot be sold in California. It is not legal for use in California or other states adopting California emission standards. - Guaranteed horsepower gain - Designed to improve throttle response and engine sound - Free-flowing high density polyethylene tube - Replaces entire factory air intake system - K&N Million Mile Limited Warranty - Lasts up to 100,000 miles before service is required (depending on driving conditions) - Easy to install, usually in 90 minutes or less
K&N 63 Series AirCharger High Performance Air Intake Kit. A look under the hood of modern cars makes clear that the air flow is restricted by unnecessary bends and kinks. This robs a vehicle of its natural horsepower. Air flows the best in a straight line and is preferably not slowed down by the filter material. The K&N 63 Series Aircharger Kit virtually eliminates the air intake restrictions in the air flow to the engine. The aerodynamically designed tube forces a massive amount of air into the engine, which translates into more power. This kit has the largest conical High- Flow air filter that fits in the engine compartment and still uses the factory holes and mounting points. The filter is isolated from the engine by a thermal shield designed to reduce the temperature of the air taken in by the motor. This provides better performance. The air filter is attached to a rotationally molded tube, braided with High Density Polyethylene. This reduces the turbulence and accelerates the air flow into the engine. With this system, you get the best High-Flow intake system available. With a K&N kit you optimize the air supply to your engine. This ensures better performance and a better engine sound. Because of this feature many people call it a power filter. Benefits of a K&N 63 Series AirCharger High Performance Air Intake Kit.: 1. More power, more torque and better throttle response. 2. The kit includes all needed brackets, hoses and attachments. 3. Water repellent. 4. Washable & reusable. 5. 4 layers of oiled cotton for maximum protection. The oil layer works as a magnet. Dust and dirt is stopped on the outside even though there is 40% more air forced into the engine. 6. 600.000 miles warranty. 7. Only clean every 50.000 to 100.000 miles. 8. The kit features a clear manual. 9. All metal parts are coated for long life. Assembly: You can easily install the K&N AirCharger kit in the car and take it out just as easy. On YouTube you can find numerous instructional videos to assist you. If you still want to have assistance when installing your K&N kit you can always go to your dealer.
K&N 63 Series AirCharger High Performance Air Intake Kit. A look under the hood of modern cars makes clear that the air flow is restricted by unnecessary bends and kinks. This robs a vehicle of its natural horsepower. Air flows the best in a straight line and is preferably not slowed down by the filter material. The K&N 63 Series Aircharger Kit virtually eliminates the air intake restrictions in the air flow to the engine. The aerodynamically designed tube forces a massive amount of air into the engine, which translates into more power. This kit has the largest conical High- Flow air filter that fits in the engine compartment and still uses the factory holes and mounting points. The filter is isolated from the engine by a thermal shield designed to reduce the temperature of the air taken in by the motor. This provides better performance. The air filter is attached to a rotationally molded tube, braided with High Density Polyethylene. This reduces the turbulence and accelerates the air flow into the engine. With this system, you get the best High-Flow intake system available. With a K&N kit you optimize the air supply to your engine. This ensures better performance and a better engine sound. Because of this feature many people call it a power filter. Benefits of a K&N 63 Series AirCharger High Performance Air Intake Kit.: 1. More power, more torque and better throttle response. 2. The kit includes all needed brackets, hoses and attachments. 3. Water repellent. 4. Washable & reusable. 5. 4 layers of oiled cotton for maximum protection. The oil layer works as a magnet. Dust and dirt is stopped on the outside even though there is 40% more air forced into the engine. 6. 600.000 miles warranty. 7. Only clean every 50.000 to 100.000 miles. 8. The kit features a clear manual. 9. All metal parts are coated for long life. Assembly: You can easily install the K&N AirCharger kit in the car and take it out just as easy. On YouTube you can find numerous instructional videos to assist you. If you still want to have assistance when installing your K&N kit you can always go to your dealer.
K&N Aircharger Kit The K&N AirCharger air intake system replaces the restrictive factory air filter and air intake housing. K&N air intakes are designed to dramatically reduce air intake restriction as well as smooth and straighten air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engines RPM range. The air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the original air box space. Air is directed through an aerodynamically engineered intake tube into the engines throttle body for a guaranteed power gain. The tube accommodates the factory crank case vent hose and air inlet temperature sensor as well as the blow off valve. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install, usually in 90 minutes or less using your vehicles existing factory mounting points. The tools needed are a screwdriver, ratchet set and an Allen wrench. This air intake cannot be sold in California. It is not legal for use in California or other states adopting California emission standards. - Guaranteed horsepower gain - Designed to improve throttle response and engine sound - Free-flowing high density polyethylene tube - Replaces entire factory air intake system - K&N Million Mile Limited Warranty - Lasts up to 100,000 miles before service is required (depending on driving conditions) - Easy to install, usually in 90 minutes or less