TTRS

15 Products

Audi TT/TTS/TTR/TTRS 8S 2015- Wagner Comp. Pakket: Intercooler EVO 3 + Downpipe zonder kat

WA700001063

Intercooler Upgrade Kit: The high-performance intercooler has the following mesh dimensions (515mm x 367mm x 95mm [stepped] = 16,500cc), providing an 84% larger flow area, as well as 101% more intercooler volume compared to the original intercooler. The newly developed Competition high-performance mesh grants sufficient airflow to the adjacent components, such as the water cooler. It is a high quality Tube Fin mesh with internal turbulators. The end boxes of the charge air cooler are made of cast aluminum and were optimized under flow analyses in the CFD system. With the help of incorporated air baffles, in the inlet, a uniform filling of the intercooler is ensured. The result is excellent cooling properties with minimal back pressure. Thus, this kit is suitable for racing. In addition, all our intercoolers have an anti-corrosion coating with heat conduction properties. This guarantees permanent and optimal cooling with a significant increase in performance. The intercooler and the original crossmember form a stable unit and weighs, thanks to the new Competition high-performance mesh, only 11.7kg. The installation is done at the original mounting points and is easy to perform (see installation instructions for slight adjustments). Tested and pressure stable up to 6 bar. All our products are subject to constant qualitative monitoring. The Wagner-Tuning Downpipe Kit for Audi TTRS: high quality stainless steel casting 1.4301 (SS304)without pre-cat for maximum performancecomplete 2x Ø70mmCAD designed and flow optimized2 lambda probe connections100% accurate fit, easy to replace with stock partless thermal load for the turbochargermore power due to dynamic pressure reductionmuch more torquesuitable for Audi TTRS 8S as well as Audi RS3 8V facelift modelscompatible with the original afterkat pipes Not approved in the area of the STVO.Error display in the DME possible.

€2,756.00

Audi TT/TTS/TTR/TTRS 8S 2015- Wagner Competition Pakket: Intercooler EVO 3 + Downpipe met kat

WA700001064

Intercooler Upgrade Kit: The high-performance intercooler has the following mesh dimensions (515mm x 367mm x 95mm [stepped] = 16,500cc), providing an 84% larger flow area, as well as 101% more intercooler volume compared to the original intercooler. The newly developed Competition high-performance mesh grants sufficient airflow to the adjacent components, such as the water cooler. It is a high quality Tube Fin mesh with internal turbulators. The end boxes of the charge air cooler are made of cast aluminum and were optimized under flow analyses in the CFD system. With the help of incorporated air baffles, in the inlet, a uniform filling of the intercooler is ensured. The result is excellent cooling properties with minimal back pressure. Thus, this kit is suitable for racing. In addition, all our intercoolers have an anti-corrosion coating with heat conduction properties. This guarantees permanent and optimal cooling with a significant increase in performance. The intercooler and the original crossmember form a stable unit and weighs, thanks to the new Competition high-performance mesh, only 11.7kg. The installation is done at the original mounting points and is easy to perform (see installation instructions for slight adjustments). Tested and pressure stable up to 6 bar. All our products are subject to constant qualitative monitoring. The Wagner-Tuning Downpipe Kit for Audi TTRS: high quality stainless steel casting 1.4301 (SS304)without pre-cat for maximum performancecomplete 2x Ø70mmCAD designed and flow optimized2 lambda probe connections100% accurate fit, easy to replace with stock partless thermal load for the turbochargermore power due to dynamic pressure reductionmuch more torquesuitable for Audi TTRS 8S as well as Audi RS3 8V facelift modelsincluding aftertubes with 2x 200CPSI EU6 metal racing catalysts Not approved in the area of the STVO.Error display in the DME possible.

€3,630.00

Audi TT/TTS/TTRS 8S 2015- 2.0TFSI 169KW, TTS 2,0TSI 228KW.. Zie beschrijving voor Comp. pakket

WA700001059a

Intercooler Upgrade Kit: The Competition Intercooler has a mesh area of 640mm x 410mm x 65mm and therefore has 17 Liter of charge air volume (OEM 9 Liter). The specially developed mesh (Tube Fin) ensures that adjacent parts such as the water cooler still retain enough airflow and is above all very light. The intercooler weighs only 8.4 kg in total. The inlets and outlets of the intercooler are enlarged to Ø 70mm, therefore this kit comes with reinforced silicone hoses. The WAGNERTUNING Competition Intercooler-Kit for the VAG 1.8TSI - 2.0TSI engine fits following cars: - VW Golf 7 GTI 2.0 TSI 162KW/220HP 169KW/230PS (incl. facelift and Performance model)- VW Golf 7 R 2.0 TSI 221KW/300PS- Skoda Superb 3V 2.0TSI 162KW/220HP- Skoda Superb 3V 2.0TSI 206KW/280HP With modifications to the car also fitting on: - Audi A3 8V 1.8TSI 132KW/180HP*- Audi S3 8V 2.0TSI 221KW/300HP*- Audi TT 8S 2.0TFSI 169KW / 230HP*- Audi TTS 8S 2.0TSI 228KW/310HP*- Seat Leon 5F Cupra 2.0TSI 206KW/280HP*- Skoda Octavia 5E 1.8TSI 132KW/180HP*- Skoda Octavia 5E RS 2.0TSI 162KW/220HP* Delivery:1 Intercooler2 Silicone hoses2 Hose clamps1 Fastening material Downpipe: - Made of high quality stainless steel SS304- diameter after the cat. Ø 76mm- CAD-Designed & Flow-optimized- 2 Lambda connections- Sport metal catalytic converter (200 CPI with EU6 jacket)- 100% fit, easy to replace against the original part- less thermal stress for the turbocharger- power increase due to reduced back pressure- considerable torque increase- including reduction in relation to the original exhaust

€1,993.00

Audi TTRS + TTRS plus 8J 2009-2014 Competition Pakket: Intercooler EVO 1 + Downpipe incl kat.

WA700001003a

Intercooler Upgrade Kit: The high performance intercoolers have the following mesh dimensions (535mm x 160mm x 110mm), providing 40% more charge air volume compared to the original intercooler. The revised performance high-performance mesh offers very good cooling characteristics. The weight of the intercooler is 6.7kg. CAD designed cast aluminum freeform end boxes for best possible internal airflow. Overall this intercooler has far less back pressure than the stock intercooler. In addition, all our intercoolers have an anti-corrosion coating with heat conduction properties. This guarantees optimal cooling with a significant increase in performance. The installation is done by replacing the OEM intercooler - plug & play - the original intercooler hoses can still be used. All our products are subject to constant qualitative monitoring. The Performance Intercooler Upgrade Kit EVO 1 fits the following vehicles. Audi TTRS 8J 250KW/340HP (2009-2014)Audi TTRS plus 8J 265KW/360HP (2009-2014)Audi RS3 8P Sportback 250KW/340HP (2011-2013) Scope of delivery:1 intercooler1 assembly instruction The Y-pipe kit for Audi TTRS 8J/RS3 8P with catalytic converter: diameter from 90mm to 2 times 70mmcomplete high quality stainless steel 1.4301 (SS304)without pre-cat1 lambda probe connection2 racing main catalysts (100 Cells/inch)100% accurate fit, easy to replace with stock partless thermal load for the turbochargermore power due to back pressure reductionmuch more torquefits for Audi TTRS 8J as well as Audi RS3 8Pcompatible with the original main catalysts

€2,156.00

Audi TTRS + TTRS plus 8J 2009-2014 Competition Pakket: Intercooler EVO 2 + Downpipe incl. kat

WA700001039

Intercooler Upgrade Kit: The high performance intercooler has the following net dimensions (535mm x 260mm x 95mm) and thus offers a 62.5% larger flow area and 94% more charge air volume compared to the original intercooler. The newly developed Competition high-performance mesh ensures sufficient airflow to the adjacent components, such as the water cooler, and is also very lightweight. The end boxes of the intercooler are made of cast aluminum and were optimized under flow analyses in the CAD system. This intercooler has hevorragende cooling properties and is just right for racing. The intercooler and the original crossmember form a stable unit and weighs less than 10kg thanks to the new Competition high-performance mesh. The assembly is done at the original mounting points and is easy to perform(1:1 exchange). An optimal cooling of the charged air with a significant increase in performance! OEM intercooler: cooling surface 856cm² / charge air volume 6,8LWT EVO 1 Performance: cooling surface 856cm² / charge air volume 9,4LWT EVO 2 Competition: cooling surface 1391cm² / charge air volume 13,2LWT EVO 3 Competition: cooling surface 1890cm² / charge air volume 16,5L All our products are subject to constant qualitative monitoring. Scope of delivery:1 intercooler together with the cross bar1 license plate holder1 assembly instruction Remark:only for racing The Y-pipe kit for Audi TTRS 8J/RS3 8P with catalytic converter: diameter from 90mm to 2 times 70mmcomplete high quality stainless steel 1.4301 (SS304)without pre-cat1 lambda probe connection2 racing main catalysts (100 Cells/inch)100% accurate fit, easy to replace with stock partless thermal load for the turbochargermore power due to back pressure reductionmuch more torquefits for Audi TTRS 8J as well as Audi RS3 8Pcompatible with the original main catalysts

€2,857.00

Audi TTRS + TTRS plus 8J tot 600PK Competition Pakket: Intercooler EVO 3 + Downpipe incl kat.

WA700001005.S

TTRS 8J 250KW/340PS (2009-2014)TTRS plus 8J 265KW/360PS (2009-2014) Intercooler Upgrade Kit: The intercooler kit EVO3 for Audi TTRS 8J is a further development of the previously known intercooler kit EVO 2 . The high performance intercooler has the following net dimensions (515mm x 367[274]mm x 95mm) and thus offers a 120% larger flow area and 142% more charge air volume compared to the original intercooler. The newly developed Competition high-performance mesh grants sufficient airflow to the adjacent components, such as the water cooler, and is also very lightweight. The end boxes of the charge air cooler are made of cast aluminum and were optimized under flow analyses in the CAD system. With the help of incorporated air baffles, in the entrance, a uniform filling of the intercooler is ensured. The result is excellent cooling properties with minimal back pressure. Thus, this kit is exactly the right thing for racing. The intercooler and the original crossmember form a stable unit and weighs only 11.2kg thanks to the new Competition high-performance mesh. The assembly is done at the original mounting points and is easy to perform(1:1 exchange). An optimal cooling of the charged air with a significant increase in performance! OEM intercooler: cooling surface 856cm² / charge air volume 6,8LWT EVO 1 Performance: cooling surface 856cm² / charge air volume 9,4LWT EVO 2 Competition: cooling surface 1391cm² / charge air volume 13,2LWT EVO 3 Competition: cooling surface 1890cm² / charge air volume 16,5L All our products are subject to constant qualitative monitoring. Scope of delivery:1 intercooler together with the cross bar1 mounting material1 set of license plate holder1 installation instruction Remark:only for racing The Y-pipe kit for Audi TTRS 8J/RS3 8P with catalytic converter: diameter from 90mm to 2 times 70mmcomplete high quality stainless steel 1.4301 (SS304)without pre-catalyst1 lambda probe connection2 racing main catalysts (100 Cells/inch)100% accurate fit, easy to replace with stock partless thermal load for the turbochargermore power due to back pressure reductionmuch more torquefits for Audi TTRS 8J as well as Audi RS3 8Pcompatible with the original main catalysts

€3,193.00

Audi TTRS + TTRS plus 8J upgrade 600PK+ Comp. Pakket: Intercooler EVO 3 + Downpipe incl kat.

WA700001005.X

TTRS 8J 250KW/340HP (2009-2014)TTRS plus 8J 265KW/360HP (2009-2014) Intercooler Upgrade Kit: The intercooler kit EVO3 for Audi TTRS 8J is a further development of the previously known intercooler kit EVO 2 . The high performance intercooler has the following net dimensions (515mm x 367[274]mm x 95mm) and thus offers a 120% larger flow area and 142% more charge air volume compared to the original intercooler. The newly developed Competition high-performance mesh grants sufficient airflow to the adjacent components, such as the water cooler, and is also very lightweight. The end boxes of the charge air cooler are made of cast aluminum and were optimized under flow analyses in the CAD system. With the help of incorporated air baffles, in the entrance, a uniform filling of the intercooler is ensured. The result is excellent cooling properties with minimal back pressure. Thus, this kit is exactly the right thing for racing. The intercooler and the original crossmember form a stable unit and weighs only 11.2kg thanks to the new Competition high-performance mesh. The assembly is done at the original mounting points and is easy to perform(1:1 exchange). An optimal cooling of the charged air with a significant increase in performance! OEM intercooler: cooling surface 856cm² / charge air volume 6,8LWT EVO 1 Performance: cooling surface 856cm² / charge air volume 9,4LWT EVO 2 Competition: cooling surface 1391cm² / charge air volume 13,2LWT EVO 3 Competition: cooling surface 1890cm² / charge air volume 16,5L All our products are subject to constant qualitative monitoring. Scope of delivery:1 intercooler together with the cross bar1 mounting material1 set of license plate holder1 installation instruction Remark:only for racing The Y-pipe kit for Audi TTRS 8J/RS3 8P with catalytic converter: diameter from 90mm to 2 times 70mmcomplete high quality stainless steel 1.4301 (SS304)without pre-catalyst1 lambda probe connection2 racing main catalysts (100 Cells/inch)100% accurate fit, easy to replace with stock partless thermal load for the turbochargermore power due to back pressure reductionmuch more torquefits for Audi TTRS 8J as well as Audi RS3 8Pcompatible with the original main catalysts

€3,416.00

Audi TTRS 8J + TTRS plus 2009-2014 Competition Pakket: Intercooler EVO2 + Downpipe zonder kat.

WA700001057

Intercooler Upgrade Kit: The high performance intercooler has the following mesh dimensions (535mm x 260mm x 95mm), providing a 62.5% larger flow area and 94% more charge air volume compared to the original intercooler. The newly developed Competition high-performance mesh ensures sufficient airflow to the adjacent components, such as the water cooler, and is also very lightweight. The end boxes of the intercooler are made of cast aluminum and were optimized under flow analyses in the CAD system. This intercooler has hevorragende cooling properties and is just right for racing. The intercooler and the original crossmember form a stable unit and weighs less than 10kg thanks to the new Competition high-performance mesh. The assembly is done at the original mounting points and is easy to perform(1:1 exchange). An optimal cooling of the charged air with a significant increase in performance! OEM intercooler: cooling surface 856cm² / charge air volume 6,8LWT EVO 1 Performance: cooling surface 856cm² / charge air volume 9,4LWT EVO 2 Competition: cooling surface 1391cm² / charge air volume 13,2LWT EVO 3 Competition: cooling surface 1890cm² / charge air volume 16,5L All our products are subject to constant qualitative monitoring. Scope of delivery:1 intercooler together with the cross bar1 license plate holder1 assembly instruction Remark:only for racing The Y-pipe for Audi TTRS 8J/RS3 8P: diameter from 90mm to 2 times 70mmcomplete high quality stainless steel 1.4301 (SS304)without pre-cat1 lambda probe connection100% accurate fit, easy to replace with stock partless thermal load for the turbochargermore power due to dynamic pressure reductionmuch more torquesuitable for Audi TTRS 8J as well as Audi RS3 8Pcompatible with the original main catalysts

€2,420.00

Intercooler Audi TTRS [8J] 2.5L Competition kit Evo 3.X voor upgrade 600PK+

WA200001056.X

TTRS 8J 250KW/340HP (2009-2014)TTRS plus 8J 265KW/360HP (2009-2014) The intercooler kit EVO3 for the Audi TTRS 8J is a further development of the previously known EVO2 intercooler kit. The high performance intercooler has the following net dimensions (515mm x 367[274]mm x 95mm), providing a 120% larger flow area and 142% more charge air volume compared to the original intercooler. The newly developed Competition high-performance mesh grants sufficient airflow to the adjacent components, such as the water cooler, and is also very lightweight. The end boxes of the charge air cooler are made of cast aluminum and were optimized under flow analyses in the CAD system. With the help of incorporated air baffles, in the entrance, is ensured a uniform filling of the intercooler. The result is excellent cooling properties with minimal back pressure. Thus, this kit is exactly the right thing for racing. The intercooler and the original crossmember form a stable unit and weighs only 11.2kg thanks to the new Competition high-performance mesh. The assembly is done at the original mounting points and is easy to perform(1:1 exchange). An optimal cooling of the charged air with a significant increase in performance! The connection diameter is 68mm on both sides. OEM intercooler: cooling surface 856cm² / charge air volume 6,8LWT EVO 1 Performance: cooling surface 856cm² / charge air volume 9,4LWT EVO 2 Competition: cooling surface 1391cm² / charge air volume 13,2LWT EVO 3 Competition: cooling surface 1890cm² / charge air volume 16,5L All our products are subject to constant qualitative monitoring. Scope of delivery:1 intercooler together with the cross bar1 mounting material1 set of license plate holder1 installation instruction

€1,708.00

Intercooler Audi TTRS [8J] 2.5L Wagner Competition kit Evo 1

WA200001107b

Audi RS3 8V Sportback 270KW/367HP 04/2015?04/2016Audi RS3 8V Sportback/Sedan 294KW/400HP 08/2017+Audi TTRS 8S 294KW/400HP 11/2016+ The Competition high performance intercooler has the following net dimensions (660x180x110 = 13,070cm³), providing a 14% larger flow area, as well as 57% more charge air volume compared to the original intercooler. The Competition high performance mesh is a high quality Tube Fin mesh with internal turbulators. Despite its size, the total weight of the intercooler is only 8.3kg. The end boxes of the intercooler are made of cast aluminum and have been optimized using flow analysis in the CFD system. The result is excellent cooling properties with the lowest backpressure. In addition, all our charge air coolers have an anti-corrosion coating with heat conduction properties. This guarantees permanent and optimal cooling with a significant increase in performance. Complete ready-to-install kit, simply replace with stock intercooler - plug and play. Tested and pressure stable up to 6 bar. All our products are subject to constant qualitative monitoring. Suitable for racing. Dimensions original intercooler:640mm x 163mm x 80mmV=8,3 litersA=1043 cm² Dimensions WAGNERTUNING intercooler:660mm x 180mm x 110mmV=13,07 LiterA=1188 cm² Scope of delivery:1 intercooler (black coated)1 assembly instruction

€1,037.00

Intercooler Audi TTRS [8J] 2.5L Wagner Competition kit Evo 2

WA200001024

TTRS 8J 250KW/340HP (2009-2014)TTRS plus 8J 265KW/360HP (2009-2014) Intercooler Upgrade Kit EVO 2 for Audi TTRS 8J The high performance intercooler has the following net dimensions (535mm x 260mm x 95mm), providing a 62.5% larger flow area and 94% more charge air volume compared to the original intercooler. The newly developed Competition high-performance mesh grants sufficient airflow to the adjacent components, such as the water cooler, and is also very lightweight. The end boxes of the intercooler are made of cast aluminum and were optimized under flow analyses in the CAD system. This intercooler has hevorragende cooling properties and is just right for racing. The intercooler and the original crossmember form a stable unit and weighs less than 10kg thanks to the new Competition high-performance mesh. The assembly is done at the original mounting points and is easy to perform(1:1 exchange). An optimal cooling of the charged air with a significant increase in performance! All our products are subject to constant qualitative monitoring. Scope of delivery:1 intercooler together with the crossmember1 set of license plate holder Remark:special coatingfor racing

€1,505.00

Intercooler Audi TTRS [8J] 2.5L Wagner Competition kit Evo 3

WA200001056.S

TTRS 8J 250KW/340HP (2009-2014)TTRS plus 8J 265KW/360HP (2009-2014) The intercooler kit EVO3 for the Audi TTRS 8J is a further development of the previously known EVO2 intercooler kit. The high performance intercooler has the following net dimensions (515mm x 367[274]mm x 95mm), providing a 120% larger flow area and 142% more charge air volume compared to the original intercooler. The newly developed Competition high-performance mesh grants sufficient airflow to the adjacent components, such as the water cooler, and is also very lightweight. The end boxes of the charge air cooler are made of cast aluminum and were optimized under flow analyses in the CAD system. With the help of incorporated air baffles, in the entrance, is ensured a uniform filling of the intercooler. The result is excellent cooling properties with minimal back pressure. Thus, this kit is exactly the right thing for racing. The intercooler and the original crossmember form a stable unit and weighs only 11.2kg thanks to the new Competition high-performance mesh. The assembly is done at the original mounting points and is easy to perform(1:1 exchange). An optimal cooling of the charged air with a significant increase in performance! The connection diameter is 68mm on both sides. OEM intercooler: cooling surface 856cm² / charge air volume 6,8LWT EVO 1 Performance: cooling surface 856cm² / charge air volume 9,4LWT EVO 2 Competition: cooling surface 1391cm² / charge air volume 13,2LWT EVO 3 Competition: cooling surface 1890cm² / charge air volume 16,5L All our products are subject to constant qualitative monitoring. Scope of delivery:1 intercooler together with the cross bar1 mounting material1 set of license plate holder1 installation instruction

€1,515.00

Intercooler Audi TTRS [8J] 2.5L Wagner Competition Kit Gen.2 EVO1

WA200001019a

Product video: http://www.youtube.com/watch?v=JGpgXoWxs3c&feature=youtu.be The revised Competition Gen.2 intercooler kit EVO1 for Audi TTRS 8J and RS3 8P 2,5TFSI. The high performance intercooler has the following external mesh dimensions (535mm x 160mm x 110mm), providing 40% more charge air volume compared to the original intercooler. The newly developed Competition high-performance mesh offers the highest cooling properties at the cutting edge of tube-fin technology. The weight of the intercooler is 6.7kg. CAD designed freeform cast aluminum end boxes for best possible internal airflow. Overall this intercooler has far less back pressure than the stock intercooler. In addition, all our intercoolers have an anti-corrosion coating with heat conduction properties. This guarantees optimal cooling with a significant increase in performance. The installation is done by replacing the OEM intercooler - plug & play - the original intercooler hoses can still be used. All our products are subject to constant qualitative monitoring. The Competition Gen.2 Intercooler Upgrade Kit EVO 1 fits the following vehicles. Audi TTRS 8J 250KW/340PS (2009-2014)Audi TTRS plus 8J 265KW/360PS (2009-2014)Audi RS3 8P Sportback 250KW/340PS (2011-2013) Scope of delivery:1 intercooler1 assembly instruction

€600.00

Intercooler Audi TTRS [8S] 2.5L Wagner Competition kit Evo 3

WA200001136.S

TTRS [8S] 2.5L TSI 294KW/400HP 05/2016- The high performance intercooler has the following net dimensions (515mm x 367mm x 95mm [stepped] = 16,500cm³), providing an 84% larger flow area, as well as 101% more charge air volume compared to the original intercooler. The newly developed Competition high-performance mesh grants sufficient airflow to the adjacent components, such as the water cooler. It is a high quality Tube Fin mesh with internal turbulators. The end boxes of the charge air cooler are made of cast aluminum and were optimized under flow analyses in the CFD system. With the help of incorporated air baffles, in the inlet, a uniform filling of the intercooler is ensured. The result is excellent cooling properties with minimal back pressure. Thus, this kit is suitable for racing. In addition, all our intercoolers have an anti-corrosion coating with heat conduction properties. This guarantees permanent and optimal cooling with a significant increase in performance. The intercooler and the original crossmember form a stable unit and weighs, thanks to the new Competition high-performance mesh, only 11.7kg. The installation is done at the original mounting points and is easy to perform (see installation instructions for slight adjustments). Tested and pressure stable up to 6 bar. All our products are subject to constant qualitative monitoring. OEM intercooler:Cooling surface 1024cm² / charge air volume 8,2LInlet and outlet Ø68mm WT EVO 3 Competition:Cooling surface 1890cm² / charge air volume 16,5LInlet and outlet Ø68mm Scope of delivery:1 intercooler together with the cross bar1 mounting material1 installation instruction1 TÜV parts certificate For racing only

€1,861.00

Intercooler Audi TTRS [8S] 2.5L Wagner Competition kit Evo 3.X voor upgrade 600PK+

WA200001136.X

TTRS [8S] 2.5L TSI 294KW/400HP 05/2016- The high performance intercooler has the following net dimensions (515mm x 367mm x 95mm [stepped] = 16,500cm³), providing an 84% larger flow area, as well as 101% more charge air volume compared to the original intercooler. The newly developed Competition high-performance mesh grants sufficient airflow to the adjacent components, such as the water cooler. It is a high quality Tube Fin mesh with internal turbulators. The end boxes of the charge air cooler are made of cast aluminum and were optimized under flow analyses in the CFD system. With the help of incorporated air baffles, in the inlet, a uniform filling of the intercooler is ensured. The result is excellent cooling properties with minimal back pressure. Thus, this kit is suitable for racing. In addition, all our intercoolers have an anti-corrosion coating with heat conduction properties. This guarantees permanent and optimal cooling with a significant increase in performance. The intercooler and the original crossmember form a stable unit and weighs, thanks to the new Competition high-performance mesh, only 11.7kg. The installation is done at the original mounting points and is easy to perform (see installation instructions for slight adjustments). Tested and pressure stable up to 6 bar. All our products are subject to constant qualitative monitoring. OEM intercooler:Cooling surface 1024cm² / charge air volume 8,2LInlet and outlet Ø68mm WT EVO 3 Competition:Cooling surface 1890cm² / charge air volume 16,5LInlet and outlet Ø68mm Scope of delivery:1 intercooler together with the cross bar1 mounting material1 installation instruction1 TÜV parts certificate For racing only

€2,095.00

Filter products