RS4

8 Products

Audi RS4 B9 331KW 2017- Wagner Competition Pakket: Intercooler + Watercooler

WA700001162

Audi RS4 B9 331KW/450hp from 2017 The intercooler upgrade kit 200001162 The 2.9 liter V6 biturbo engine (VW EA839) of the Audi RS4 and RS5 models is equipped with an indirect charge air cooling circuit. The cooling process of the charge air is consequently realized by a water-cooled charge air cooler, which is replaced by the WagnerTuning high-performance charge air cooler. The WAGNERTUNING high-performance charge air cooler has a new type of performance mesh with the dimensions 222 mm x 200 mm x 120 mm. This was developed specifically for the high demands of the RS4/RS5 engine and offers 185% more external mesh volume compared to the original intercooler. The ratio between internal and external cooling surface used here generates maximum heat transfer and at the same time allows the best possible internal airflow. The cast aluminum end boxes were designed in CAD and optimized with the help of CFD simulations. The result is excellent cooling properties at lowest backpressure. Thus, this kit is also suitable for racing. An optimal cooling of the charged air with a significant increase in performance! All WAGNERTUNING intercoolers are equipped with a heat-conducting anti-corrosion coating, so that a lasting cooling effect is ensured. The installation of the system is also uncomplicated and plug & play with the help of our installation instructions. Advantages of this product:- significantly better cooling performance- less back pressure- more power and torque for your engine- mechanical relief of the turbocharger- 100% pressure resistance- 100% plug and play- up to 4 years warranty Not approved in the area of the STVO. The water cooler upgrade kit 400001012 The 2.9L V6 biturbo engine of the Audi RS4 / RS5 is equipped with an indirect charge air cooling circuit. Consequently, the cooling process of the charge air is not realized (as usual) with the ambient air as a cooling medium, but with the help of a separate cooling water circuit. A reduction in the cooling water temperature can therefore be directly equated with improved charge air cooling performance. This is exactly where the advantages of the WAGNERTUNING Upgrade water cooler come into play. The newly developed competition racing mesh of the WAGNERTUNING high-performance water cooler increases the cooling volume of the standard water cooler by a total of 55%. The ratio between inner and outer cooling surface generates maximum heat transfer and at the same time allows the adjacent components (e.g. the engine water cooler behind it) sufficient air flow for its heat exchange. Furthermore, the water coolers are equipped with a heat-conducting anti-corrosion coating to ensure a long-lasting cooling effect. The installation of the system is also uncomplicated and plug & play with the help of our installation instructions. Scope of delivery:1x frontal water cooler (low temperature circuit)1x set water hoses1x mounting material1x installation instruction

€3,416.00

Intercooler Audi RS4 2.7 [B5] Wagner Competition kit Evo 2 Gen.2 met carbon luchtleiders

WA200001140.KKIT

RS4 B5 2.7L 280KW/381PS 1997-2001 Volume: 147% additional load volume The high performance intercooler has the following net dimensions (255 mm x 260 mm x 120 mm) and thus offers a 43% larger flow area, as well as 147% more charge air volume compared to the original intercooler. The newly developed Competition high-performance mesh offers the highest cooling characteristics at the cutting edge of tube-fin technology. The end boxes of the intercooler are made of cast aluminum and were optimized using flow analyses in the CAD system. The intercooler kit was developed directly for extremely high performance levels of the Audi RS4, therefore the connection diameters were also increased to Ø65mm on both sides.A maximum cooling of the charged air with a significant increase in performance!This kit also includes air guides made of visually appealing carbon.The assembly takes place at the original mounting points. However, major modifications to the vehicle are necessary in order to install these intercoolers (see installation instructions). All our products are subject to constant qualitative monitoring. Scope of delivery:2 intercoolers (right, left)2 carbon air ducts (right, left)2 air grilles without fog light mounts (right, left)4 silicone hoses8 hose clamps1 mounting material

€2,328.00

Intercooler Audi RS4 2.7 [B5] Wagner Competition kit Evo 2 Gen.2 zonder carbon luchtleiders

WA200001140.SINGLE

RS4 B5 2.7L 280KW/381PS 1997-2001 Volume: 147% additional load volume The high performance intercooler has the following net dimensions (255 mm x 260 mm x 120 mm) and thus offers a 43% larger flow area, as well as 147% more charge air volume compared to the original intercooler. The newly developed Competition high-performance mesh offers the highest cooling characteristics at the cutting edge of tube-fin technology. The end boxes of the intercooler are made of cast aluminum and were optimized using flow analyses in the CAD system. The intercooler kit was developed directly for extremely high performance levels of the Audi RS4, therefore the connection diameters were also increased to Ø65mm on both sides.A maximum cooling of the charged air with a significant increase in performance!This kit also includes air guides made of visually appealing carbon.The assembly takes place at the original mounting points. However, major modifications to the vehicle are necessary in order to install these intercoolers (see installation instructions). All our products are subject to constant qualitative monitoring. Scope of delivery:2 intercoolers (right, left)2 carbon air ducts (right, left)2 air grilles without fog light mounts (right, left)4 silicone hoses8 hose clamps1 mounting material

€1,739.00

Intercooler Audi RS4 2.7 [B5] Wagner Competition Kit Gen.2 met carbon luchtleiders

WA200001139.KKIT

RS4 B5 2.7L 280KW/381HP 1997-2001 Volume: 2x6L (89% additional cargo volume)Weight: 2x5.2kg The high performance intercoolers have the following mesh dimensions (255mm x265mm x 90mm), providing a 46% larger flow area, and 89% more charge air volume compared to the original intercoolers. The newly developed Competition high-performance mesh offers improved cooling characteristics on the latest Tube-Fin technology. The end boxes of the intercooler are made of cast aluminum and were optimized using flow analyses in the CAD system. The intercooler kit was developed directly for the high demands of the Audi RS4. An optimal cooling of the charged air with a significant increase in performance! In direct comparison to the Performance Gen.1 intercooler, enormous improvements could be shown again. This kit also includes air guides made of visually appealing carbon. The installation is done at the original mounting points and is very easy to perform. Inlet Ø55mm - Outlet Ø65mm All our products are subject to constant qualitative monitoring. Scope of delivery:2 intercoolers (right, left)2 carbon air ducts (right, left)2 air grilles without fog light mounts (right, left)4 silicone hoses8 hose clamps1 mounting material

€2,095.00

Intercooler Audi RS4 2.7 [B5] Wagner Competition Kit Gen.2 zonder carbon luchtleiders

WA200001139.SINGLE

RS4 B5 2.7L 280KW/381HP 1997-2001 Volume: 2x6L (89% additional cargo volume)Weight: 2x5.2kg The high performance intercoolers have the following mesh dimensions (255mm x265mm x 90mm), providing a 46% larger flow area, and 89% more charge air volume compared to the original intercoolers. The newly developed Competition high-performance mesh offers improved cooling characteristics on the latest Tube-Fin technology. The end boxes of the intercooler are made of cast aluminum and were optimized using flow analyses in the CAD system. The intercooler kit was developed directly for the high demands of the Audi RS4. An optimal cooling of the charged air with a significant increase in performance! In direct comparison to the Performance Gen.1 intercooler, enormous improvements could be shown again. This kit also includes air guides made of visually appealing carbon. The installation is done at the original mounting points and is very easy to perform. Inlet Ø55mm - Outlet Ø65mm All our products are subject to constant qualitative monitoring. Scope of delivery:2 intercoolers (right, left)2 carbon air ducts (right, left)2 air grilles without fog light mounts (right, left)4 silicone hoses8 hose clamps1 mounting material

€1,505.00

Intercooler Audi RS4 2.9 TFSI [B9] Wagner Competition Watercooler Kit

WA400001012.OEM

Competition water cooler kit for Audi RS4 B9 / RS5 F5 Plug and Play suitable for the following models: Audi RS4 B9 331KW/450hp from 2017Audi RS5 F5 331KW/450hp from 2017 The 2.9L V6 biturbo engine of the Audi RS4 / RS5 is equipped with an indirect charge air cooling circuit. As a result, the cooling process of the charge air is not realized (as usual) with the ambient air as a cooling medium, but is carried out with the help of a separate cooling water circuit. A reduction in the cooling water temperature can therefore be directly equated with improved charge air cooling performance. This is exactly where the advantages of the WAGNERTUNING Upgrade water cooler come into play.The newly developed competition racing mesh of the WAGNERTUNING high-performance water cooler increases the cooling volume of the standard water cooler by a total of 55%. The ratio between inner and outer cooling surface generates maximum heat transfer and at the same time allows the adjacent components (e.g. the engine water cooler behind it) sufficient air flow for its heat exchange. Furthermore, the water coolers are equipped with a heat-conducting anti-corrosion coating to ensure a long-lasting cooling effect. The installation of the system is also uncomplicated and plug & play with the help of our installation instructions. Dimensions OEM water cooler:720 mm x 485 mm x 25 mmV = 8.73 litersA = 3492 cm² WT water cooler dimensions:690 mm x 490 mm x 40 mmV = 13.52 litersA = 3381 cm

€1,271.00

Intercooler Audi RS4 2.9 TFSI [B9] Wagner Competition Watercooler Kit WT

WA400001012.WT

Plug and Play suitable for the following models: Audi RS4 B9 331KW/450HP from 2017Audi RS5 F5 331KW/450HP as of 2017 The 2.9L V6 biturbo engine of the Audi RS4 / RS5 is equipped with an indirect charge air cooling circuit. As a result, the cooling process of the charge air is not realized (as usual) with the ambient air as a cooling medium, but is carried out with the help of a separate cooling water circuit. A reduction in the cooling water temperature can therefore be directly equated with improved charge air cooling performance. This is exactly where the advantages of the WAGNERTUNING Upgrade water cooler come into play.The newly developed competition racing mesh of the WAGNERTUNING high-performance water cooler increases the cooling volume of the standard water cooler by a total of 55%. The ratio between inner and outer cooling surface generates maximum heat transfer and at the same time allows the adjacent components (e.g. the engine water cooler behind it) sufficient air flow for its heat exchange. Furthermore, the water coolers are equipped with a heat-conducting anti-corrosion coating to ensure a long-lasting cooling effect. The installation of the system is also uncomplicated and plug & play with the help of our installation instructions. Dimensions OEM water cooler:720 mm x 485 mm x 25 mmV = 8.73 litersA = 3492 cm² WT water cooler dimensions:690 mm x 490 mm x 40 mmV = 13.52 litersA = 3381 cm

€1,271.00

Intercooler Audi RS4 2.9 TFSI [B9] Wagner Performance Kit

WA200001162

The 2.9 liter V6 biturbo engine (VW EA839) of the Audi RS4/RS5 models is equipped with an indirect charge air cooling circuit. The cooling process of the charge air is consequently realized by a water-cooled intercooler, which is replaced by the WagnerTuning high-performance intercooler. The WAGNERTUNING high-performance charge air cooler has a new type of performance mesh with the dimensions 222 mm x 200 mm x 120 mm. This was developed specifically for the high demands of the RS4/RS5 engine and offers 185% more external mesh volume compared to the original intercooler. The ratio between internal and external cooling surface used here generates maximum heat transfer and at the same time allows the best possible internal airflow. The cast aluminum end boxes were designed in CAD and optimized with the help of CFD simulations. The result is excellent cooling properties at lowest backpressure. Thus, this kit is also suitable for racing. An optimal cooling of the charged air with a significant increase in performance! All WAGNERTUNING intercoolers are equipped with a heat-conducting anti-corrosion coating, so that a lasting cooling effect is ensured. The installation of the system is also uncomplicated and plug & play with the help of our installation instructions. Advantages of this product:- significantly better cooling performance- less back pressure- more power and torque for your engine- mechanical relief of the turbocharger- 100% pressure resistance- 100% plug and play- up to 4 years warranty Mains dimensions OEM intercooler:220 mm x 100 mm x 85 mmV = 1.87 liters Mains dimensions WT intercooler:222 mm x 200 mm x 120 mmV = 5.33 liters Scope of delivery:1 intercooler2 silicone hoses air6 cooling water hoses1 mounting material1 installation instruction Not approved in the area of the STVO.

€2,328.00

Filter products