Intercooler BMW 3-serie 335(x)i, 335is N54/N55 E9.. 2006- Wagner Performance kit Evo 1
The intercooler EVO 1 has the following net dimensions (520x210x130/staged 11,750cm³) and thus offers an 85% larger flow area, as well as 60% more charge air volume compared to the original intercooler. The Performance high performance mesh is a high quality bar and plate mesh with very good cooling properties. Due to the high material content, the performance version has a weight of 9.0kg. The end boxes of the intercooler are made of cast aluminum and were optimized with the help of flow analyses in the CFD system. The EVO 1 intercooler kit is suitable for the first power stages of the BMW 35i engines. This intercooler causes less back pressure than the stock intercooler. In addition, all our intercoolers have an anti-corrosion coating with heat conduction properties. This guarantees long-lasting and optimal cooling with a significant increase in performance. Complete ready-to-install kit, simply replace with stock intercooler - plug and play. The original charge air hoses can still be used. Tested up to 6 bar and pressure stable. All our products are subject to constant qualitative monitoring. The Performance Intercooler Kit EVO 1 fits the following vehicles with N54 & N55 engines. BMW 135i E82/E88 2006-2013BMW 1erM E82 2011-2013BMW 335 (x)i E90/E91/E92/93 2006-2011BMW 335is E92 2009-2013BMW Z4 20i E89 2011-2016BMW Z4 28i E89 2001-2016BMW Z4 35i E89 2009-2016BMW Z4 35is E89 2010-2016 Scope of delivery:1 intercooler1 mounting material1 assembly instruction
Intercooler BMW 3-serie 335d E90/91/92/93 (2005-2013) Wagner Competition kit Evo 2
Vehicle modifications may be required (see installation manual.) Volume: 13.6L which is 65% more than the original intercooler Packaging:1 Intercooler 520mm x 210mm x 150mm3 Silicone hoses1 Alu Adapter1 Air TubeMounting materialsAssembly Manual
Intercooler BMW 3-serie 335d E90/91/92/93 (2005-2013) Wagner Competition kit Evo 3
The high performance intercooler has the net dimensions 510mm x 303mm x 180mm (stepped 20.65L) and thus offers a 133% larger flow area, as well as 183% more charge air volume compared to the original intercooler. The Competition high performance mesh is a high quality Tube Fin mesh with internal turbulators. Despite its size, the total weight of the intercooler is only 13.2kg. The end boxes of the intercooler are made of cast aluminum and have been optimized using flow analysis in the CFD system. The intercooler kit EVO3 was developed directly for the high demands of the large tuning stages on the BMW 135i and 335i. The original click connections were eliminated and the connection diameters at the inlet and outlet were expanded to Ø70mm. Therefore, the kit includes two reinforced silicone hoses. The result is excellent cooling properties with the lowest back pressure. In addition, all our intercoolers have an anti-corrosion coating with heat conduction properties. This guarantees long-lasting and optimum cooling with a significant increase in performance. Complete ready-to-install kit, simply replace with stock intercooler - due to the extreme size, minor adjustments to the radiator support are necessary. Tested up to 6 bar and pressure stable. All our products are subject to constant qualitative monitoring. Suitable for racing. The intercooler kit EVO III Competition is suitable for the following vehicles: BMW 335d E90/91/92/93 (2005-2013) (without ACC)*. *Adjustments to the vehicle are necessary. OEM intercooler:V = 7,29 LA = 66300 mm² WAGNERTUNING intercooler:V = 20,65 LA = 154530 mm² Scope of delivery:1 intercooler (black coated)3 silicone hoses1 aluminum adapter (black anodized)1 aluminum charge air pipe ( black anodized)1 mounting material1 assembly instruction
Intercooler BMW 3-serie E46 318d, 320d, 330d 2003-2006 Wagner Competition kit
BMW E46 318d ( 85kw/116HP ) 2001-2005BMW E46 320d/Cd/td ( 100-110KW/136-150HP ) 1998-2006BMW E46 330d/Cd/xd ( 135-150KW/184-204HP ) 1999-2006 Not suitable for 320td Compact with the M bumper cover r. (BMW part no.: 51 11 7 894750 or 51 71 7 895 094, depending on XENON) The WAGNERTUNING high-performance intercooler has a new type of Competition mesh (Tube Fin) with the dimensions 550 mm x 168 [139] mm x 120 [100] mm [stepped]. This corresponds to an external net volume of 10.7 liters. Thus, the WagnerTuning Competition intercooler for the BMW E46 offers a 31% larger frontal inflow area and 205% more external net volume compared to the original intercooler. The cast aluminum end boxes were designed in CAD and optimized using CFD simulations (for ideal internal airflow). The result is excellent cooling characteristics with the lowest back pressure. Thus, this kit is just right for racing. An optimal cooling of the charged air with a significant increase in performance! An anti-corrosion coating with excellent heat conduction properties protects the WAGNERTUNING intercooler from any environmental influences, as a result of which a lasting and optimal cooling effect can be guaranteed. The assembly takes place at the original mounting points and is easy to perform (plug and play). All our products are subject to constant quality control. Inlet diameter Ø63 mm (OEM click connection); Outlet diameter Ø63 mm (OEM click connection). OEM intercooler:540 mm x 130 mm x 50 mmV = 3,51 LA = 702 cm² WAGNERTUNING intercooler:550 mm x 168 [139] mm x 120 [100] mm [stepped]V = 10,7LA = 919 cm² Scope of delivery:1 intercooler1 mounting material1 installation instruction
Intercooler BMW 3-serie E8..316d N47D20 2009-2013 (alleen LCI-model) Wagner Performance kit
BMW 116d E81/E82/E87/E88 85KW/1116HP (2009-2013) LCI model onlyBMW 118d E81/E82/E87/E88 90-105KW/122-143HP (2003-2013) incl. LCI modelBMW 120d E81/E82/E87/E88 120KW/163HP (2003-2007) BMW 316d E90/E91/E92/E93 85KW/116HP (2009-2012) LCI model onlyBMW 318d E90/E91/E92/E93 90-105KW/122-143HP (2005-2013) incl. LCI modelBMW 320d E90/E91/E92/E93 110-120KW/150-163HP (2003-2007) BMW X1 16d E84 85KW/1116HP (2012-2014)BMW X1 18d(x) E84 105KW/143HP (2010-2014 Packaging:Intercooler 520mm x 200mm x 120mmAssembly Manual
Intercooler BMW 3-serie E9.. 318d N47D20 2003-2013 Wagner Performance kit
BMW 116d E81/E82/E87/E88 85KW/1116HP (2009-2013) LCI model onlyBMW 118d E81/E82/E87/E88 90-105KW/122-143HP (2003-2013) incl. LCI modelBMW 120d E81/E82/E87/E88 120KW/163HP (2003-2007) BMW 316d E90/E91/E92/E93 85KW/116HP (2009-2012) LCI model onlyBMW 318d E90/E91/E92/E93 90-105KW/122-143HP (2005-2013) incl. LCI modelBMW 320d E90/E91/E92/E93 110-120KW/150-163HP (2003-2007) BMW X1 16d E84 85KW/1116HP (2012-2014)BMW X1 18d(x) E84 105KW/143HP (2010-2014 Packaging:Intercooler 520mm x 200mm x 120mmAssembly Manual
Intercooler BMW 3-serie E9.. 320d N47 2008-2012 Wagner Performance kit
BMW 120d (130KW/177HP) E81/E82/E87/E88 (2007-2013)BMW 123d (150KW/204HP) E81/E82/E87/E88 (2007-2013)BMW 320d (120-135KW/163-184HP) E90/E91/E92/E93 (2008-2012)BMW X1 20d(x) E84 130-135KW/177-184HP (2009-2015)BMW X1 23d(x) E84 150KW/204HP (2009-2012) Packaging:Intercooler 520mm x 200mm x 100mmInstallation manual
Intercooler BMW 3-serie E9.. 320d N47D20 2003-2007 Wagner Performance kit
BMW 116d E81/E82/E87/E88 85KW/1116HP (2009-2013) LCI model onlyBMW 118d E81/E82/E87/E88 90-105KW/122-143HP (2003-2013) incl. LCI modelBMW 120d E81/E82/E87/E88 120KW/163HP (2003-2007) BMW 316d E90/E91/E92/E93 85KW/116HP (2009-2012) LCI model onlyBMW 318d E90/E91/E92/E93 90-105KW/122-143HP (2005-2013) incl. LCI modelBMW 320d E90/E91/E92/E93 110-120KW/150-163HP (2003-2007) BMW X1 16d E84 85KW/1116HP (2012-2014)BMW X1 18d(x) E84 105KW/143HP (2010-2014 Packaging:Intercooler 520mm x 200mm x 120mmAssembly Manual
Intercooler BMW 3-serie F3.. 2011- 316i, 320i(x), 328i(x), 335i(x), 316d, 318d(x)... Competition kit
316i F30 / F31 / F34 100KW/136HP (from 2011)320i(x) F30 / F31 / F34 135KW/184HP (2011+)328i(x) F30 / F31 / F34 180KW/245HP (2011+)335i(x) F30 / F31 / F34 235KW/320HP (2011+)316d F30 / F31 / F34 85KW/116HP (2012+)?318d(x) F30 / F31 / F34 105KW/143HP (2012+)?320d(x) F30 / F31 / F34 135KW/184HP (2011+)--> also applicable for facelift model 320D 120kw, but the OEM ventilation grills have to be removed?325d F30 / F31 / F34 160KW/218HP (2013+)?330d(x) F30 / F31 / F34 190KW/258HP (2012+)?335d(x) F30 / F31 / F34 230KW/313HP (2013+) The high performance intercooler has the following net dimensions (520x215x145/staged 13.840cm³ / OEM 510x130x110mm, 7.293cm³) and thus offers a 68% larger flow area, as well as 90% more charge air volume compared to the original intercooler. The Competition high performance mesh is a high quality Tube Fin mesh with internal turbulators. Despite its size, the total weight of the intercooler is only 8.6kg. The end boxes of the intercooler are made of cast aluminum and have been optimized using flow analysis in the CFD system. The intercooler kit EVO 2 was developed directly for the high demands of the BMW 135i and 335i. Overall, this intercooler has far less backpressure than the standard intercooler. In addition, all our intercoolers have an anti-corrosion coating with heat conduction properties. This guarantees long-lasting and optimal cooling with a significant increase in performance. Complete ready-to-install kit, simply replace with stock intercooler - plug and play. The original charge air hoses can still be used. Tested up to 6 bar and pressure stable. All our products are subject to constant qualitative monitoring. Suitable for racing. The Competition Intercooler Kit EVO 2 is also plug and play suitable for the following vehicles: ? BMW 114i F20 / F21 75KW/102HP (2012-2015)? BMW 116i F20 / F21 100KW/136HP (2011-2015)? BMW 116i F20 / F21 80KW/109HP (2015+)? BMW 118i F20 / F21 125KW/170HP (2011-2015)? BMW 118i F20 / F21 100KW/136HP (2015+)? BMW 120i F20 / F21 130KW/177HP (2014-06/2016)? BMW 125i F20 / F21 160KW/218HP (2012-06/2016)? BMW M135i(x) F20 / F21 235-240KW/320-326HP (2011-2016)? BMW 114d F20 / F21 70KW/95HP (2012+)? BMW 116d F20 / F21 85KW/116HP (2011+)? BMW 118d(x) F20 / F21 105-110KW/143-150HP (2011+)? BMW 120d(x) F20 / F21 135-140KW/184-190HP (2011+)? BMW 125d F20 / F21 160-165KW/218-224HP (2012+) ? BMW 218i F22 100KW/136HP (2015+)? BMW 220i F22 135KW/184HP (2014-06/2016)? BMW 228i(x) F22 180KW/245HP (2014-06/2016)? BMW M235i(x) F22 240KW/326HP (2014-2016)? BMW M2 F87 272KW/370HP (2016+)? BMW 218d F22 103-110KW/143-150HP (2014+)? BMW 220d(x) F22 135-140KW/184-190HP (2014+)? BMW 225d F22 165KW/224HP (2014+) ? BMW 316i F30 / F31 / F34 100KW/136HP (2011-2015)? BMW 318i F30 / F31 / F34 100KW/136HP (2015+)? BMW 320i(x) F30 / F31 / F34 135KW/184HP (2011-2015)? BMW 328i(x) F30 / F31 / F34 180KW/245HP (2011-2015)? BMW 335i(x) F30 / F31 / F34 225KW/306HP (2011-2015)? BMW 316d F30 / F31 / F34 85KW/116HP (2012+)? BMW 318d(x) F30 / F31 / F34 105KW/143HP (2012+)? BMW 320d(x) F30 / F31 / F34 135-140KW/184-190HP (2011+)? BMW 325d F30 / F31 / F34 160KW/218HP (2013+)? BMW 328(x)d F30 / F31 / F34 135KW/184HP (2013+)? BMW 330d(x) F30 / F31 / F34 190KW/258HP (2012+)? BMW 335d(x) F30 / F31 / F34 230KW/313HP (2013+) ? BMW 418i F32 / F36 100KW/134HP (2016-)? BMW 420i(x) F32 / F36 135KW/184HP (2013-2015)? BMW 428i(x) F32 / F36 180KW/245HP (2013-2016)? BMW 435i(x) F32 / F36 225KW/306HP (2013-2016)? BMW 418d F32 / F36 105-110KW/1143-150HP (2014+)? BMW 420d(x) F32 / F36 135-140KW/184-190HP (2013+)? BMW 425d F32 / F36 160-165KW/218-224HP (2014+)? BMW 430d(x) F32 / F36 190KW/258HP (2013+)? BMW 435d(x) F32 / F36 230KW/313HP (2013+) Scope of delivery:1 intercooler1 mounting material1 assembly instruction
Intercooler BMW 3-serie F3.. 2011- 316i, 320i, 328i, 335i, 316d, 318d, 320d, 325d... Competition kit
?316i F30 / F31 / F34 100KW/136HP (2011+)?320i(x) F30 / F31 / F34 135KW/184HP (2011+)?328i(x) F30 / F31 / F34 180KW/245HP (2011+)?335i(x) F30 / F31 / F34 235KW/320HP (2011+)?316d F30 / F31 / F34 85KW/116HP (2012+)?318d(x) F30 / F31 / F34 105KW/143HP (2012+)?320d(x) F30 / F31 / F34 135KW/184HP (2011+)?325d F30 / F31 / F34 160KW/218HP (2013+)?330d(x) F30 / F31 / F34 190KW/258HP (2012+)?335d(x) F30 / F31 / F34 230KW/313HP (2013+) The high performance intercooler has the following net dimensions (520x210x130/stepped 11.750cm³ / OEM 510x130x110mm, 7.293cm³) and thus offers a 64% larger flow area, as well as 60% more charge air volume compared to the original intercooler. The Competition high performance mesh is a high quality Tube Fin mesh with internal turbulators. As a result, the total weight of the intercooler is only 6.6kg. The end boxes of the intercooler are made of cast aluminum and have been optimized using flow analysis in the CFD system. The intercooler kit EVO1 is suitable for the first power stages of BMW engines. This intercooler causes less back pressure than the stock intercooler. In addition, all our intercoolers have an anti-corrosion coating with heat conduction properties. This guarantees a durable and optimal cooling with a significant increase in performance. Complete ready-to-install kit, simply replace with stock intercooler - plug and play. The original charge air hoses can still be used. Tested up to 6 bar and pressure stable. All our products are subject to constant qualitative monitoring. From now on with TÜV parts certificate for many vehicles! The Competition Intercooler Kit EVO 1 is plug and play suitable for the following vehicles: ? BMW 114i F20 / F21 75KW/102HP (2012-2015)? BMW 116i F20 / F21 100KW/136HP (2011-2015)? BMW 116i F20 / F21 80KW/109HP (2015+)? BMW 118i F20 / F21 125KW/170HP (2011-2015)? BMW 118i F20 / F21 100KW/136HP (2015+)? BMW 120i F20 / F21 130KW/177HP (2014-06/2016)? BMW 125i F20 / F21 160KW/218HP (2012-06/2016)? BMW M135i(x) F20 / F21 235-240KW/320-326HP (2011-2016)? BMW 114d F20 / F21 70KW/95HP (2012+)? BMW 116d F20 / F21 85KW/116HP (2011+)? BMW 118d(x) F20 / F21 105-110KW/143-150HP (2011+)? BMW 120d(x) F20 / F21 135-140KW/184-190HP (2011+)? BMW 125d F20 / F21 160-165KW/218-224HP (2012+) ? BMW 218i F22 / F23 100KW/136HP (2015+)? BMW 220i F22 / F23 135KW/184HP (2014-06/2016)? BMW 228i(x) F22 / F23 180KW/245HP (2014-06/2016)? BMW M235i(x) F22/F23 240KW/326HP (2014-2016)? BMW M2 F87 272KW/370HP (2016+)? BMW 218d F22 / F23 103-110KW/143-150HP (2014+)? BMW 220d(x) F22 / F23 135-140KW/184-190HP (2014+)? BMW 225d F22 / F23 165KW/224HP (2014+) ? BMW 316i F30 / F31 / F34 100KW/136HP (2011-2015)? BMW 318i F30 / F31 / F34 100KW/136HP (2015+)? BMW 320i(x) F30 / F31 / F34 135KW/184HP (2011-2015)? BMW 328i(x) F30 / F31 / F34 180KW/245HP (2011-2015)? BMW 335i(x) F30 / F31 / F34 225KW/306HP (2011-2015)? BMW 316d F30 / F31 / F34 85KW/116HP (2012+)? BMW 318d(x) F30 / F31 / F34 105KW/143HP (2012+)? BMW 320d(x) F30 / F31 / F34 135-140KW/184-190HP (2011+)? BMW 325d F30 / F31 / F34 160KW/218HP (2013+)? BMW 328(x)d F30 / F31 / F34 135KW/184HP (2013+)? BMW 330d(x) F30 / F31 / F34 190KW/258HP (2012+)? BMW 335d(x) F30 / F31 / F34 230KW/313HP (2013+) ? BMW 418i F32 / F33 / F36 100KW/134HP (2016-)? BMW 420i(x) F32 / F33 / F36 135KW/184HP (2013-2015)? BMW 428i(x) F32 / F33 / F36 180KW/245HP (2013-2016)? BMW 435i(x) F32 / F33 / F36 225KW/306HP (2013-2016)? BMW 418d F32 / F33 / F36 105-110KW/1143-150HP (2014+)? BMW 420d(x) F32 / F33 / F36 135-140KW/184-190HP (2013+)? BMW 425d F32 / F33 / F36 160-165KW/218-224HP (2014+)? BMW 430d(x) F32 / F33 / F36 190KW/258HP (2013+)? BMW 435d(x) F32 / F33 / F36 230KW/313HP (2013+) Scope of delivery:1 intercooler1 mounting material1 assembly instruction
Intercooler BMW 3-serie F3.. 2011- 320i, 330i, 340i LCI vanaf 09/2014- Competition Watercooler kit
Competition water cooler kit for BMW B48 & B58 engine Plug and Play suitable for the following models: BMW 1 series F20/F21 LCI from 09/2015 - 120i, 125i, M140(x)iBMW 2 series F22/F23 LCI from 09/2016 - 220i, 230i, M240iBMW 3 series F30/F31/F34/F35 LCI from 09/2014 - 320i, 330i, 340iBMW 4 Series F32/F33/F36 LCI from 05/2016 - 420i, 430i, 440i The 2.0 liter B48B20 and 3.0 liter B58B30M0 turbo engine of the specified BMW models is equipped with an indirect charge air cooling circuit. As a result, the charge air cooling process is not carried out (as usual) using the ambient air as a cooling medium, but with the aid of a separate cooling water circuit. A reduction in the cooling water temperature can therefore be directly equated with improved charge air cooling performance. This is exactly where the advantages of the WAGNERTUNING Upgrade water cooler come into play. The newly developed competition racing mesh of the WAGNERTUNING high performance water cooler increases the cooling volume of the standard water cooler by 117%. The ratio between inner and outer cooling surface generates a maximum heat transfer and at the same time allows the adjacent components (e.g. the engine water cooler behind it) sufficient air flow for its heat exchange. Furthermore, with the help of the increased amount of cooling water, the entire system thermics can be kept at a lower level over a longer period of time. All WAGNERTUNING water coolers are equipped with a heat-conducting anti-corrosion coating, so that a lasting cooling effect is ensured. The installation of the system is also uncomplicated and plug & play with the help of our installation instructions. Dimensions OEM water cooler:576 mm x 495 mm x 27 mmV = 7.70 litersA = 2851 cm² WT water cooler dimensions:524 mm x 468 mm x 68 mmV = 16.70 litersA = 2454 cm²
Intercooler BMW 3-serie F30/31 M340i B58.1 Hybrid Carbon inlaatspruitsuk met watercooler
The 3.0 Liter B58 turbo engine of the BMW M models is equipped with an indirect charge-air cooling circuit. The cooling of the charged air is thus achieved by a water-cooled intercooler integrated directly into the intake manifold. The new WAGNERTUNING hybrid-carbon intake manifold with integrated intercooler has a special core, which was specially developed for the high demands of the B58 engine and offers 50% more external core volume compared to the original intercooler.The calculated ratio of inner to outer cooling surface generates maximum heat transfer and at the same time the best possible internal airflow.Using CFD simulations, the CNC-machined endtanks were designed for optimal airflow conditions.The result is excellent cooling with minimal back pressure. Therefore, this kit is also perfect for racing use.Optimal cooling of the charged air with a significant performance increase! All WAGNERTUNING radiators have a heat-conducting anti-corrosion coating for long-lasting cooling.The plug-and-play installation of the system is simple and easy to perform (an installation instruction is also included). Benefits of this product: - significantly improved cooling performance (up to 20°C cooler AIT)- maximum mechanical removal of the turbocharger- more power and torque for your engine- 100% pressure resistance- 100% Plug and Play (no modifications)- pre-engineered port fuel injection (fuel rail optionally available)- 1/8 NPT ports for measuring additional parameters- this intake manifold is suitable for all performance levels
Intercooler BMW 3-serie F30/31/32/34/35/36 335i & 435i N55 Motor Wagner Competition kit Evo 3
The high performance intercooler has the net dimensions 510mm x 345mm x 180mm (stepped 23,56L) and thus offers a 165% larger flow area, as well as 223% more charge air volume compared to the original intercooler. The Competition high performance mesh is a high quality Tube Fin mesh with internal turbulators. Despite its size, the total weight of the intercooler is only 13.8kg. The end boxes of the intercooler are made of cast aluminum and have been optimized using flow analysis in the CFD system. The intercooler kit EVO3 was developed directly for the high demands of the large tuning stages on the BMW M135i and M235i. The original click connections were eliminated and the connection diameters at the inlet were expanded to Ø65mm and outlet to Ø76mm. Therefore, the kit includes two reinforced silicone hoses, as well as an aluminum charge air pipe in Ø76mm. The result is excellent cooling properties at lowest backpressure. In addition, all our intercoolers have an anti-corrosion coating with heat conduction properties. This guarantees durable and optimal cooling with a significant increase in performance. Complete ready-to-install kit, including modified crossmember, easy to replace with stock parts - due to the extreme size, minor adjustments to the radiator support are necessary. Tested up to 6 bar and pressure stable. All our products are subject to constant qualitative monitoring. Suitable for racing. Dimensions original intercooler:510mm x 130mm x 110mmV=7,3 litersA=663 cm² Dimensions WAGNERTUNING intercooler:510mm x 345mm x 180mm [stepped].V=23,56 LiterA=1759,5 cm² The intercooler kit EVO III Competition fits in the following cars with N55 engine: BMW F30 / F31 / F34 / F35 335i 225KW/306HP (2012-2015).BMW F32 / F36 435i 225KW/306HP (2013-2016)Not suitable for xDrive models. Scope of delivery:1 intercooler1 Ø76mm charge air pipe1 external air duct2 silicone hoses1 aluminum adapter1 crossbar1 mounting material1 assembly instruction Not approved in the STVO area.
Intercooler BMW 3-serie G20/G21 M340i Inlaat spruitstuk met geintergreerde Wagner intercooler EVO 1
Benefits of this product: - Significantly improved cooling performance (up to 20° cooler intake air temperatures)- Maximum mechanical and thermal relief of the turbocharger (35% less back pressure)- more power and torque for your engine- 100% pressure resistant- 100% plug and play (no modifications)- pre-prepared injection in the intake manifold (fuel rail optionally available)- three 1/8 NPT ports for measuring additional parameters- six prepared NOS or WMI ports- this intake manifold is suitable for all power levels
Intercooler BMW 4-serie F3.. 418i, 420i(x), 428i(x), 435i(x), 418d, 420d(x), 425d.. Competition kit
? BMW 420i(x) F32 / F36 135KW/184HP (2013-2015)? BMW 428i(x) F32 / F36 180KW/245HP (2013-2016)? BMW 435i(x) F32 / F36 225KW/306HP (2013-2016)? BMW 418d F32 / F36 105-110KW/143-150HP (2014+)? BMW 420d(x) F32 / F36 135-140KW/184-190HP (2013+)? BMW 425d F32 / F36 160-165KW/218-224HP (2014+)? BMW 430d(x) F32 / F36 190KW/258HP (2013+)? BMW 435d(x) F32 / F36 230KW/313HP (2013+) The high performance intercooler has the following net dimensions (520x215x145/staged 13,840cm³ / OEM 510x130x110mm, 7,293cm³) and thus offers a 68% larger flow area, as well as 90% more charge air volume compared to the original intercooler. The Competition high performance mesh is a high quality Tube Fin mesh with internal turbulators. Despite its size, the total weight of the intercooler is only 8.6kg. The end boxes of the intercooler are made of cast aluminum and have been optimized using flow analysis in the CFD system. The intercooler kit EVO 2 was developed directly for the high demands of the BMW 135i and 335i. Overall, this intercooler has far less backpressure than the standard intercooler. In addition, all our intercoolers have an anti-corrosion coating with heat conduction properties. This guarantees long-lasting and optimal cooling with a significant increase in performance. Complete ready-to-install kit, simply replace with stock intercooler - plug and play. The original charge air hoses can still be used. Tested up to 6 bar and pressure stable. All our products are subject to constant qualitative monitoring. Suitable for racing. The Competition Intercooler Kit EVO 2 is also plug and play suitable for the following vehicles: ? BMW 114i F20 / F21 75KW/102HP (2012-2015)? BMW 116i F20 / F21 100KW/136HP (2011-2015)? BMW 116i F20 / F21 80KW/109HP (2015+)? BMW 118i F20 / F21 125KW/170HP (2011-2015)? BMW 118i F20 / F21 100KW/136HP (2015+)? BMW 120i F20 / F21 130KW/177HP (2014-06/2016)? BMW 125i F20 / F21 160KW/218HP (2012-06/2016)? BMW M135i(x) F20 / F21 235-240KW/320-326HP (2011-2016)? BMW 114d F20 / F21 70KW/95HP (2012+)? BMW 116d F20 / F21 85KW/116HP (2011+)? BMW 118d(x) F20 / F21 105-110KW/143-150HP (2011+)? BMW 120d(x) F20 / F21 135-140KW/184-190HP (2011+)? BMW 125d F20 / F21 160-165KW/218-224HP (2012+) ? BMW 218i F22 100KW/136HP (2015+)? BMW 220i F22 135KW/184HP (2014-06/2016)? BMW 228i(x) F22 180KW/245HP (2014-06/2016)? BMW M235i(x) F22 240KW/326HP (2014-2016)? BMW M2 F87 272KW/370HP (2016+)? BMW 218d F22 103-110KW/143-150HP (2014+)? BMW 220d(x) F22 135-140KW/184-190HP (2014+)? BMW 225d F22 165KW/224HP (2014+) ? BMW 316i F30 / F31 / F34 100KW/136HP (2011-2015)? BMW 318i F30 / F31 / F34 100KW/136HP (2015+)? BMW 320i(x) F30 / F31 / F34 135KW/184HP (2011-2015)? BMW 328i(x) F30 / F31 / F34 180KW/245HP (2011-2015)? BMW 335i(x) F30 / F31 / F34 225KW/306HP (2011-2015)? BMW 316d F30 / F31 / F34 85KW/116HP (2012+)? BMW 318d(x) F30 / F31 / F34 105KW/143HP (2012+)? BMW 320d(x) F30 / F31 / F34 135-140KW/184-190HP (2011+)? BMW 325d F30 / F31 / F34 160KW/218HP (2013+)? BMW 328(x)d F30 / F31 / F34 135KW/184HP (2013+)? BMW 330d(x) F30 / F31 / F34 190KW/258HP (2012+)? BMW 335d(x) F30 / F31 / F34 230KW/313HP (2013+) ? BMW 418i F32 / F36 100KW/134HP (2016-)? BMW 420i(x) F32 / F36 135KW/184HP (2013-2015)? BMW 428i(x) F32 / F36 180KW/245HP (2013-2016)? BMW 435i(x) F32 / F36 225KW/306HP (2013-2016)? BMW 418d F32 / F36 105-110KW/1143-150HP (2014+)? BMW 420d(x) F32 / F36 135-140KW/184-190HP (2013+)? BMW 425d F32 / F36 160-165KW/218-224HP (2014+)? BMW 430d(x) F32 / F36 190KW/258HP (2013+)? BMW 435d(x) F32 / F36 230KW/313HP (2013+) Scope of delivery:1 intercooler1 mounting material1 assembly instruction
Intercooler BMW 4-serie F3.. 418i, 420i, 428i, 435i, 418d, 420d, 425d.. Wagner Competition kit Evo 1
? BMW 420i(x) F32 / F33 / F36 135KW/184HP (2013-2015)? BMW 428i(x) F32 / F33 / F36 180KW/245HP (2013-2016)? BMW 435i(x) F32 / F33 / F36 225KW/306HP (2013-2016)? BMW 418d F32 / F33 / F36 105-110KW/143-150HP (2014+)? BMW 420d(x) F32 / F33 / F36 135-140KW/184-190HP (2013+)? BMW 425d F32 / F33 / F36 160-165KW/218-224HP (2014+)? BMW 430d(x) F32 / F33 / F36 190KW/258HP (2013+)? BMW 435d(x) F32 / F33 / F36 230KW/313HP (2013+) The high performance intercooler has the following net dimensions (520x210x130/stepped 11.750cm³ / OEM 510x130x110mm, 7.293cm³) and thus offers a 64% larger flow area, as well as 60% more charge air volume compared to the original intercooler. The Competition high performance mesh is a high quality Tube Fin mesh with internal turbulators. As a result, the total weight of the intercooler is only 6.6kg. The end boxes of the intercooler are made of cast aluminum and have been optimized using flow analysis in the CFD system. The intercooler kit EVO1 is suitable for the first power stages of BMW engines. This intercooler causes less back pressure than the stock intercooler. In addition, all our intercoolers have an anti-corrosion coating with heat conduction properties. This guarantees a durable and optimal cooling with a significant increase in performance. Complete ready-to-install kit, simply replace with stock intercooler - plug and play. The original charge air hoses can still be used. Tested up to 6 bar and pressure stable. All our products are subject to constant qualitative monitoring. From now on with TÜV parts certificate for many vehicles! The Competition Intercooler Kit EVO 1 is plug and play suitable for the following vehicles: ? BMW 114i F20 / F21 75KW/102HP (2012-2015)? BMW 116i F20 / F21 100KW/136HP (2011-2015)? BMW 116i F20 / F21 80KW/109HP (2015+)? BMW 118i F20 / F21 125KW/170HP (2011-2015)? BMW 118i F20 / F21 100KW/136HP (2015+)? BMW 120i F20 / F21 130KW/177HP (2014-06/2016)? BMW 125i F20 / F21 160KW/218HP (2012-06/2016)? BMW M135i(x) F20 / F21 235-240KW/320-326HP (2011-2016)? BMW 114d F20 / F21 70KW/95HP (2012+)? BMW 116d F20 / F21 85KW/116HP (2011+)? BMW 118d(x) F20 / F21 105-110KW/143-150HP (2011+)? BMW 120d(x) F20 / F21 135-140KW/184-190HP (2011+)? BMW 125d F20 / F21 160-165KW/218-224HP (2012+) ? BMW 218i F22 / F23 100KW/136HP (2015+)? BMW 220i F22 / F23 135KW/184HP (2014-06/2016)? BMW 228i(x) F22 / F23 180KW/245HP (2014-06/2016)? BMW M235i(x) F22/F23 240KW/326HP (2014-2016)? BMW M2 F87 272KW/370HP (2016+)? BMW 218d F22 / F23 103-110KW/143-150HP (2014+)? BMW 220d(x) F22 / F23 135-140KW/184-190HP (2014+)? BMW 225d F22 / F23 165KW/224HP (2014+) ? BMW 316i F30 / F31 / F34 100KW/136HP (2011-2015)? BMW 318i F30 / F31 / F34 100KW/136HP (2015+)? BMW 320i(x) F30 / F31 / F34 135KW/184HP (2011-2015)? BMW 328i(x) F30 / F31 / F34 180KW/245HP (2011-2015)? BMW 335i(x) F30 / F31 / F34 225KW/306HP (2011-2015)? BMW 316d F30 / F31 / F34 85KW/116HP (2012+)? BMW 318d(x) F30 / F31 / F34 105KW/143HP (2012+)? BMW 320d(x) F30 / F31 / F34 135-140KW/184-190HP (2011+)? BMW 325d F30 / F31 / F34 160KW/218HP (2013+)? BMW 328(x)d F30 / F31 / F34 135KW/184HP (2013+)? BMW 330d(x) F30 / F31 / F34 190KW/258HP (2012+)? BMW 335d(x) F30 / F31 / F34 230KW/313HP (2013+) ? BMW 418i F32 / F33 / F36 100KW/134HP (2016-)? BMW 420i(x) F32 / F33 / F36 135KW/184HP (2013-2015)? BMW 428i(x) F32 / F33 / F36 180KW/245HP (2013-2016)? BMW 435i(x) F32 / F33 / F36 225KW/306HP (2013-2016)? BMW 418d F32 / F33 / F36 105-110KW/1143-150HP (2014+)? BMW 420d(x) F32 / F33 / F36 135-140KW/184-190HP (2013+)? BMW 425d F32 / F33 / F36 160-165KW/218-224HP (2014+)? BMW 430d(x) F32 / F33 / F36 190KW/258HP (2013+)? BMW 435d(x) F32 / F33 / F36 230KW/313HP (2013+) Scope of delivery:1 intercooler1 mounting material1 assembly instruction
Intercooler BMW 4-serie F30/31/32/34/35/36 335i & 435i N55 Motor Wagner Competition kit Evo 3
The high performance intercooler has the net dimensions 510mm x 345mm x 180mm (stepped 23,56L) and thus offers a 165% larger flow area, as well as 223% more charge air volume compared to the original intercooler. The Competition high performance mesh is a high quality Tube Fin mesh with internal turbulators. Despite its size, the total weight of the intercooler is only 13.8kg. The end boxes of the intercooler are made of cast aluminum and have been optimized using flow analysis in the CFD system. The intercooler kit EVO3 was developed directly for the high demands of the large tuning stages on the BMW M135i and M235i. The original click connections were eliminated and the connection diameters at the inlet were expanded to Ø65mm and outlet to Ø76mm. Therefore, the kit includes two reinforced silicone hoses, as well as an aluminum charge air pipe in Ø76mm. The result is excellent cooling properties at lowest backpressure. In addition, all our intercoolers have an anti-corrosion coating with heat conduction properties. This guarantees durable and optimal cooling with a significant increase in performance. Complete ready-to-install kit, including modified crossmember, easy to replace with stock parts - due to the extreme size, minor adjustments to the radiator support are necessary. Tested up to 6 bar and pressure stable. All our products are subject to constant qualitative monitoring. Suitable for racing. Dimensions original intercooler:510mm x 130mm x 110mmV=7,3 litersA=663 cm² Dimensions WAGNERTUNING intercooler:510mm x 345mm x 180mm [stepped].V=23,56 LiterA=1759,5 cm² The intercooler kit EVO III Competition fits in the following cars with N55 engine: BMW F30 / F31 / F34 / F35 335i 225KW/306HP (2012-2015).BMW F32 / F36 435i 225KW/306HP (2013-2016)Not suitable for xDrive models. Scope of delivery:1 intercooler1 Ø76mm charge air pipe1 external air duct2 silicone hoses1 aluminum adapter1 crossbar1 mounting material1 assembly instruction Not approved in the area of the STVO.
Intercooler BMW 4-serie F32/33/36 M440i B58.1 Hybrid Carbon inlaatspruitsuk met watercooler
The 3.0 Liter B58 turbo engine of the BMW M models is equipped with an indirect charge-air cooling circuit. The cooling of the charged air is thus achieved by a water-cooled intercooler integrated directly into the intake manifold. The new WAGNERTUNING hybrid-carbon intake manifold with integrated intercooler has a special core, which was specially developed for the high demands of the B58 engine and offers 50% more external core volume compared to the original intercooler.The calculated ratio of inner to outer cooling surface generates maximum heat transfer and at the same time the best possible internal airflow.Using CFD simulations, the CNC-machined endtanks were designed for optimal airflow conditions.The result is excellent cooling with minimal back pressure. Therefore, this kit is also perfect for racing use.Optimal cooling of the charged air with a significant performance increase! All WAGNERTUNING radiators have a heat-conducting anti-corrosion coating for long-lasting cooling.The plug & play installation of the system is simple and easy to perform (an installation instruction is also included). Benefits of this product: - significantly improved cooling performance (up to 20°C cooler AIT)- maximum mechanical removal of the turbocharger- more power and torque for your engine- 100% pressure resistance- 100% Plug and Play (no modifications)- pre-engineered port fuel injection (fuel rail optionally available)- 1/8 NPT ports for measuring additional parameters- this intake manifold is suitable for all performance levels
Intercooler BMW 4-serie F32/F33/F36 420i, 430, 440i LCI vanaf 05/2016- Competition Watercooler kit
Competition water cooler kit for BMW B48 & B58 engine Plug and Play suitable for the following models: BMW 1 series F20/F21 LCI from 09/2015 - 120i, 125i, M140(x)iBMW 2 series F22/F23 LCI from 09/2016 - 220i, 230i, M240iBMW 3 series F30/F31/F34/F35 LCI from 09/2014 - 320i, 330i, 340iBMW 4 Series F32/F33/F36 LCI from 05/2016 - 420i, 430i, 440i The 2.0 liter B48B20 and 3.0 liter B58B30M0 turbo engine of the specified BMW models is equipped with an indirect charge air cooling circuit. As a result, the charge air cooling process is not carried out (as usual) using the ambient air as a cooling medium, but with the aid of a separate cooling water circuit. A reduction in the cooling water temperature can therefore be directly equated with improved charge air cooling performance. This is exactly where the advantages of the WAGNERTUNING Upgrade water cooler come into play. The newly developed competition racing mesh of the WAGNERTUNING high performance water cooler increases the cooling volume of the standard water cooler by 117%. The ratio between inner and outer cooling surface generates a maximum heat transfer and at the same time allows the adjacent components (e.g. the engine water cooler behind it) sufficient air flow for its heat exchange. Furthermore, with the help of the increased amount of cooling water, the entire system thermics can be kept at a lower level over a longer period of time. All WAGNERTUNING water coolers are equipped with a heat-conducting anti-corrosion coating, so that a lasting cooling effect is ensured. The installation of the system is also uncomplicated and plug & play with the help of our installation instructions. Dimensions OEM water cooler:576 mm x 495 mm x 27 mmV = 7.70 litersA = 2851 cm² WT water cooler dimensions:524 mm x 468 mm x 68 mmV = 16.70 litersA = 2454 cm²
Intercooler BMW 4-serie G22/G23/G26 M440i Inlaat spruitstuk met geintergreerde intercooler EVO 1
Benefits of this product: - Significantly improved cooling performance (up to 20° cooler intake air temperatures)- Maximum mechanical and thermal relief of the turbocharger (35% less back pressure)- more power and torque for your engine- 100% pressure resistant- 100% plug and play (no modifications)- pre-prepared injection in the intake manifold (fuel rail optionally available)- three 1/8 NPT ports for measuring additional parameters- six prepared NOS or WMI ports- this intake manifold is suitable for all power levels
Intercooler BMW 5-serie F07/F10/F11 520i, 528i Wagner Competition kit
The Wagner Tuning Competition intercooler has the following net dimensions (500mm x 254mm x 110[55]mm / stepped = 11.3 cm³) and thus offers an 83% larger inflow area and 62% more charge air volume compared to the original intercooler. The newly developed Competition high-performance mesh still provides sufficient airflow to the adjacent components, such as the water cooler, and is also very light (7.4 kg). CAD designed freeform end boxes with cast aluminum internal baffles for best possible internal airflow. Overall, this intercooler has less back pressure than the stock intercooler. In addition, all our intercoolers have an anti-corrosion coating with heat conduction properties. This guarantees optimal cooling with a significant increase in performance. Installation is done by replacing the OEM intercooler and is easy to perform. All our products are subject to constant qualitative monitoring. The Competition intercooler kit fits the following vehicles with the N20 engine: BMW F07/F10/F11 520i 2010+BMW F07/F10/F11 528i 2010+ Scope of delivery:1 intercooler1 assembly instruction
Intercooler BMW 5-serie F07/F10/F11 535i(x), 518d, 520d, 525d(x), 530d(x).. Performance intercooler
The performance intercooler has the following mesh dimensions (570mm x 302mm x 100mm / stepped = 14.2 liters), providing a 92% larger flow area and 97% more charge air volume compared to the original intercooler. The performance high-flow network still grants sufficient airflow to the adjacent components, such as the water cooler. CAD-developed free-form end boxes with cast aluminum internal baffles for best possible internal airflow. Overall, this intercooler has far less backpressure than the stock cooler. The weight of the performance intercooler is 11.7kg. In addition, all of our intercoolers have an anti-corrosion coating with heat conduction properties. This guarantees optimal cooling with a significant increase in performance. Installation is done by replacing the OEM intercooler and is easy to do. All our products are subject to constant qualitative monitoring. The performance intercooler kit fits the following vehicles: BMW F07/F10/F11/F18 535i (x) (2009-2016).BMW F10/F11 518d (2013-2016)BMW F07/F10/F11 520d (x) (2010-2016)BMW F10/F11 525d (x) (2010-2016)BMW F07/F10/F11 530d (x) (2010-2016)BMW F07/F10/F11 535d (x) (2010-2016)BMW F06/F12/F13 640i (x) (2010-2016)BMW F06/F12/F13 640d (x) (2010-2016)BMW F01/F02 740i (2007-2012)BMW F01/F02 730d (x) (2007-2015)BMW F01/F02 740d (x) (2007-2015) Scope of delivery:1 intercooler1 mounting material1 assembly instruction
Intercooler BMW 5-serie G30/G31/F90 2017- 520d-540d Wagner Competition kit
Competition intercooler kit for BMW G30/31 520-540d G32 620-640d The Competition high performance intercooler has the following net dimensions (570mm x 236mm x 150mm / stepped = 16,160cm³) and thus offers a 70% larger flow area, as well as 112% more charge air volume compared to the original intercooler. The Competition high performance mesh is a high quality Tube Fin mesh with internal turbulators. Despite its size, the total weight of the intercooler is only 10.5kg. The end boxes of the intercooler are made of cast aluminum and have been optimized using flow analysis in the CFD system. The result is excellent cooling properties with the lowest backpressure. In addition, all our charge air coolers have an anti-corrosion coating with heat conduction properties. This guarantees long-lasting and optimal cooling with a significant increase in performance. Completely ready to install kit, simply replace with stock intercooler - plug and play. The original charge air hoses can still be used. Tested up to 6 bar and pressure stable. All our products are subject to constant qualitative monitoring. Dimensions original intercooler:545mm x 145mm x 96mmV=7,6 litersA=790 cm² Dimensions WAGNERTUNING intercooler:570mm x 236mm x 150mm / steppedV=16,2 LiterA=1345 cm² Scope of delivery:1 intercooler (black coated)1 assembly instruction
Intercooler BMW 5-seriie E60/E61 525d, 530d, 535d Wagner Performance kit
The performance intercooler has the following mesh dimensions (530mm x 244[134]mm x 150[50]mm / stepped = 13.5 liters), providing 87% more flow area and 95% more charge air volume compared to the original intercooler. The performance intercooler offers very good cooling characteristics. The weight of the intercooler is 9.8kg. CAD designed cast aluminum freeform end boxes for best possible internal airflow. Overall this intercooler has far less back pressure than the stock intercooler. In addition, all our intercoolers have an anti-corrosion coating with heat conduction properties. This guarantees optimal cooling with a significant increase in performance. Installation is done by replacing the OEM intercooler and is easy to do. The original charge air hoses can still be used. All our products are subject to constant qualitative monitoring. Scope of delivery:1 intercooler1 assembly instruction The performance intercooler kit is also suitable for the following vehicles: BMW 525d 2004-2010 E60/61 130-145KW/177-197HP**.BMW 530d 2003-2010 E60/61 160-173KW/218-235HP**BMW 535d 2004-2010 E60/E61 200-210KW/272-286HPBMW 635d 2006-2010 E63/E64 200-210KW/272-286HP **Adjustment to module carrier necessary.
Intercooler BMW 6-serie E63/E64 2006- 635d Wagner Performance kit
635 d 2006-2010 E63/E64 200-210KW/272-286HP Volume: 13.5LWeight: 9.8kg Packaging:Intercooler 530mm x 244[134]mm x 150[50]mmAssembly Manual
Intercooler BMW 6-serie F06/F12/F13 2011- 640i(x), 640d(x) Wagner Performance intercooler
BMW F07/F10/F11/F18 535i (x) (2009-2016)BMW F10/F11 518d (2013-2016)BMW F07/F10/F11 520d (x) (2010-2016)BMW F10/F11 525d (x) (2010-2016)BMW F07/F10/F11 530d (x) (2010-2016)BMW F07/F10/F11 535d (x) (2010-2016)BMW F06/F12/F13 640i (x) (2010-2016)BMW F06/F12/F13 640d (x) (2010-2016)BMW F01/F02 740i (2007-2012)BMW F01/F02 730d (x) (2007-2015)BMW F01/F02 740d (x) (2007-2015) Packaging:Intercooler 570mm x 302mm x 100mmmounting hardwareMounting instructions
Intercooler BMW 6-serie G30/G31/G32 620d-640d Wagner Competition kit
Dimensions original Intercooler: 545mm x 145mm x 96mmV=7.6 LiterA=790 cm² Dimensions Wagnertuning Intercooler:570mm x 236mm x 150mm / stuccoedV=16,2 LiterA=1345 cm² Packaging:Intercooler 570mm x 236mm x 150mmmounting material
intercooler BMW 7-serie F01/F02 2007- 740i, 730d(x), 740d(x) Wagner Performance intercooler
BMW F07/F10/F11/F18 535i (x) (2009-2016)BMW F10/F11 518d (2013-2016)BMW F07/F10/F11 520d (x) (2010-2016)BMW F10/F11 525d (x) (2010-2016)BMW F07/F10/F11 530d (x) (2010-2016)BMW F07/F10/F11 535d (x) (2010-2016)BMW F06/F12/F13 640i (x) (2010-2016)BMW F06/F12/F13 640d (x) (2010-2016)BMW F01/F02 740i (2007-2012)BMW F01/F02 730d (x) (2007-2015)BMW F01/F02 740d (x) (2007-2015) Packaging:Intercooler 570mm x 302mm x 100mmmounting hardwareMounting instructions
Intercooler BMW M2 F87 2016+ Competition S55 zij-koeler Wagner Competition Watercooler side
Dimensions OEM side mounted radiator:250 mm x 165 mm x 40 mm / 9,8Inch x 6,5Inch x 1,6InchV = 1,65 LiterA = 412,5 cm² / 63,7Inch² Dimensions WT side mounted radiator:252 mm x 188 mm x 68 mm / 9,9Inch x 7,4Inch x 2,7InchV = 3,2 Liter (+94%)A = 473,8 cm² / 73,3Inch² (+14,9%)
Intercooler BMW M2 F87 272KW/370PK (2016+) Wagner Competition kit Evo 1
? BMW M235i(x) F22 240KW/326HP (2014-2016)? BMW M2 F87 272KW/370HP (2016+) Volume: 11.7LWeight: 6.6kg Packaging:Intercooler 520x210x130assembly manualmounting material
Intercooler BMW M2 F87 272KW/370PK (2016+) Wagner Competition kit Evo 2
? BMW M235i(x) F22 240KW/326HP (2014-2016)? BMW M2 F87 272KW/370HP (2016+) Volume: 11.7LWeight: 6.6kg Packaging:Intercooler 520x210x130assembly manualmounting material
Intercooler BMW M2 F87 Competition S55 hoofdcooler Wagner Competition Watercooler front
Frontal water cooler for BMW M2/M3/M4 S55 OEM water cooler dimensions(frontal):590 mm x 308 mm x 25 mmV = 4.5 litersA = 1817 cm² WT water cooler dimensions (frontal):568 mm x 468.4 mm x 32 mmV = 8.5 liters (+89%)A = 2660.5 cm² (+46.4%) Scope of delivery:1x frontal water cooler (low temperature circuit)1x installation manual
Intercooler BMW M2 F87 Competition S55 Wagner Competition kit
The 3.0 liter S55B30 turbo engine of the BMW M2 Competion / M3 / M4 models is equipped with an indirect charge air cooling circuit. The cooling process of the charge air is consequently realized by a water-cooled intercooler, which is replaced by the WagnerTuning high-performance intercooler. The WAGNERTUNING high performance intercooler has a new Competition net (Tube Fin) with the dimensions 287 mm x 185 mm x 115 mm. This was developed specifically for the high demands of the BMW M3/M4 and offers 114% more external net volume compared to the original intercooler. The ratio between internal and external cooling surface used here generates maximum heat transfer and at the same time allows the best possible internal air flow. The cast aluminum end boxes were designed in CAD and optimized with the help of CFD simulations. The result is excellent cooling properties at lowest backpressure. Thus, this kit is also suitable for racing. An optimal cooling of the charged air with a significant increase in performance! All WAGNERTUNING intercoolers are equipped with a heat-conducting anti-corrosion coating, so that a lasting cooling effect is ensured. The installation of the system is also uncomplicated and plug & play with the help of our installation instructions. Advantages of this product:- significantly better cooling performance- less back pressure- more power and torque for your engine- mechanical relief of the turbocharger- 100% pressure resistance- 100% plug and play- up to 4 years warranty Mains dimensions OEM intercooler:276 mm x 136 mm x 76 mmV = 2.85 liters Mains dimensions WT intercooler:287 mm x 185 mm x 115 mmV = 6.10 liters
Intercooler BMW M2 F87 Competition S55 Wagner Competition kit met WT-logo
(With minor adjustments inside the hood also suitable for the BMW M2 Competition). The 3.0 liter S55B30 turbo engine of the BMW M2 Competion / M3 / M4 models is equipped with an indirect charge air cooling circuit. The cooling process of the charge air is consequently realized by a water-cooled intercooler, which is replaced by the WagnerTuning high-performance intercooler. The WAGNERTUNING high performance intercooler has a new Competition net (Tube Fin) with the dimensions 287 mm x 185 mm x 115 mm. This was developed specifically for the high demands of the BMW M3/M4 and offers 114% more external net volume compared to the original intercooler. The ratio between internal and external cooling surface used here generates maximum heat transfer and at the same time allows the best possible internal air flow. The cast aluminum end boxes were designed in CAD and optimized with the help of CFD simulations. The result is excellent cooling properties at lowest backpressure. Thus, this kit is also suitable for racing. An optimal cooling of the charged air with a significant increase in performance! All WAGNERTUNING charge air coolers are equipped with a heat-conducting anti-corrosion coating, so that a lasting cooling effect is ensured. Advantages of this product:- significantly better cooling performance- less back pressure- more power and torque for your engine- mechanical relief of the turbocharger- 100% pressure resistance- 100% plug and play- up to 4 years warranty dimensions OEM intercooler:276 mm x 136 mm x 76 mmV = 2.85 liters dimensions WT intercooler:287 mm x 185 mm x 115 mmV = 6.10 liters
Intercooler BMW M2 F87 Competition S55 Wagner Competition Watercooler Kit
OEM water cooler dimensions (frontal):590 mm x 308 mm x 25 mmV = 4.5 litersA = 1817 cm² WT water cooler dimensions (frontal):568 mm x 468.4 mm x 32 mmV = 8.5 liters (+89%)A = 2660.5 cm² (+46.4%) OEM water cooler dimensions (lateral):250 mm x 165 mm x 40 mmV = 1.65 litersA = 412.5 cm² WT water cooler dimensions (lateral):252 mm x 188 mm x 68 mmV = 3.2 liters (+94%)A = 473.8 cm² (+14.9%) Scope of delivery:1x frontal water cooler (low-temperature circuit)1x lateral water cooler (low temperature circuit)1x carbon air duct for the lateral water cooler1x mounting material1x installation instruction
Intercooler BMW M3 Competition G80/81 353-375KW/480-510PS vanaf 2021+ Wagner Watercooler
Dimensions OEM cooler505 mm x 605 mm x 30 mmV = 9.16 litresA = 3055 cm² Dimensions Wagner cooler505 mm x 605 mm x 48 mmV = 14.67 litresA = 3055 cm²