Wagner Tuning | Car Fantasy

Products of Wagner Tuning

WAGNER Intercoolers zijn leverbaar als Performance en Competition. Het verschil zit in het type gebruikte gaas. Bij de Performance is dat "Bar & Plate" en bij de Competition "Tube Fin".

Daarnaast zijn er nog 3 verschillende volumes: EVO1, EVO2 en EVO3.

EVO1 is ontwikkeld om gebruikt te worden in combinatie met de originele turbolader met als resultaat een zeer efficiënte koeling van de inlaatlucht. EVO2 en EVO3 hebben een grotere volume en gaan prima samen met de toename van inlaatlucht na een turbolader upgrade. Afhankelijk van het systeem worden ook de in- en uitlaat diameters vergroot.
Deze intercoolers worden met de benodigde siliconen slangen geleverd.

687 Products

Downpipe Audi A3 8V 1.8 TSI 132kw met roetfilter/GPF (niet voor quattro) met sportkat. 200CPI

WA500001041

Fits the following VAG 1.8-2.0TSI (132-206kw) 2WD models with particulate filter/GPF Audi A3 8V 1.8 TSI 132KW/180HP (not for QUATTRO model)Seat Leon III ST 1.8 TSI 132KW/180HPSeat Leon III Cupra / R 2.0 TSI 195KW/265HP - 228KW/310HP (not for 4x4)Skoda Octavia III 1.8 TSI 132KW/180HPSkoda Octavia III RS 2.0 TSI 162KW/220HPVW Golf VII GTI 2.0 TSI 162KW/220HP - 195KW/265HP - made of high quality stainless steel SS304- diameter after the cat. Ø 76mm- CAD-Designed & Flow-optimized- 2 Lambda connections- Sport metal catalytic converter (200 CPI with EU6 jacket)- 100% fit, easy to replace against the original part- less thermal stress for the turbocharger- power increase due to reduced back pressure- considerable torque increase- including reduction in relation to the original exhaust Installation of the WAGNER Downpipe may require an ECU remapping to prevent an error med in the engine management system.NOT EC APPROVED

€1,037.00

Downpipe kit BMW 1-serie F20/21 M 140i 3.0B 58 16-18 incl. 1x 200CPI sportkat. model zonder roetfilt

WA500001027.200CPSI

Suitable for BMW B58 engine: BMW F20/21 M140i 3.0L 250KW/340HP 2016 - 2018BMW F22/23 M240i 3.0L 250KW/340HP 2016 - 2018BMW F30/31/34 340i 3.0L 240KW/326HP 2015 - 2018BMW F32/33/36 440i 3.0L 240KW/326HP 2015 - 2018BMW G30/31/38 540i 3.0L 250KW/340HP 2017 - 2018BMW G32 GT 640i 3.0L 250KW/340HP 2017 - 2018BMW G12 740i 3.0L 240KW/326HP 2015 - 2018BMW X3 G01 M40i 3.0L 265KW/360HP 2017 - 2018BMW X4 G02 M40i 3.0L 260KW/354HP 2017 - 2018 This kit replaces the following original BMW part number: 18328631625 - manufactured from high quality stainless steel 1.4301 (SS304)- diameter Ø 76mm incl adapter for connection to original exhaust- CAD-Designed & Flow-optimized- 2 Lambda sensor connections- 1 Sport metal catalytic converter (200 CPI, EURO 6 jacket)- 100% fit, easy to replace against the original part- Less thermal stress for the turbocharger- Power increase due to reduced back pressure- considerable torque increase NOT for model with particulate filter/GPFInstallation of the WAGNER Downpipe may require an ECU remapping to prevent an error med in the engine management system.NOT EC APPROVED

€1,108.00

Downpipe kit BMW 2-serie F22/23 2016-2018 incl. 1x 200CPI sportkat. model zonder roetfilter/GPF

WA500001027.200CPSIa

€1,108.00

Downpipe kit BMW 2-serie F22/F23 220i 2.0 135kW mot. N20 2014- incl. 1x 200CPI sportkat.

WA500001011a

The Y-pipe kit is suitable for the following vehicles with the N20 engine: BMW 125i F20 / F21BMW 220i F22 / F23BMW 228i F22 / F23BMW 320i (x) F30 / F31 / F34BMW 328i (x) F30 / F31 / F34BMW 420i F32 / F33BMW 428i (x) F32 / F33 / F36 replaces original BMW part number: 18327645666 BJ. as of 10/2012 diameter of 76mmcomplete high quality stainless steel 1.4301 (SS304)CAD-Designed2 lambda probe connectionsRacing main catalyst (200 Cell/inch)100% accurate fit, easy to replace with stock partless thermal load for the turbochargerMore power due to dynamic pressure reductionconnection diameter 105mmmuch more torque Not approved in the area of the STVO.

€925.00

Downpipe kit BMW 2-serie F22/F23 220i 2.0 135kW mot. N20 2014- zonder hoofd-kat.

WA500001016a

Fits the following models with N20 engine BMW 125i F20 / F21BMW 220i F22 / F23BMW 228i F22 / F23BMW 320i (x) F30 / F31 / F34BMW 328i (x) F30 / F31 / F34BMW 420i F32 / F33BMW 428i (x) F32 / F33 / F36 replaces original BMW part number 18327645666 as of 10/2012 - diameter: Ø 76mm- manufactured from high-grade stainless steel SS304- CAD-Designed- 2 Lambda connections- without main catalytic converter- 100% fit, easy to replace against the original part- less thermal stress for the turbocharger- power increase due to reduced back pressure- considerable increase in torque- connection diameter Ø 105mm When installing the WAGNER Downpipe, an ECU remapping may be required to prevent an error feeding into the engine management system.NOT EC APPROVED

€458.00

Downpipe kit BMW 3-serie E90/91/92/93 335i 3.0 225kw mot.N55 2006-2011 incl. 1x 200CPI sportkat.

WA500001005a

Fits the following models: BMW 135i E82/E88BMW 335(x)i E90/E91/E92/E93 - diameter: Ø 76mm- manufactured from high-grade stainless steel SS304- CAD-Designed- lambda connections- Race main catalytic converter (200 Cells/inch, EU6 coating)- 100% fit, easy to replace against the original part- less thermal stress for the turbocharger- power increase due to reduced back pressure- significant increase in torque When installing the WAGNER Downpipe, an ECU remapping may be required to prevent an error feeding into the engine management system.NOT EC APPROVED

€925.00

Downpipe kit BMW 3-serie F30/31/34 320i(x) 2.0 135kw mot. N20 10/2012- incl. 1x 200CPI sportkat.

WA500001011c

€925.00

Downpipe kit BMW 3-serie F30/31/34 328i(x) 2.0 180kw mot. N20 10/2012- incl. 1x 200CPI sportkat.

WA500001011d

€925.00

Downpipe kit BMW 3-serie F30/31/34 335i(x) 3.0 235kw mot. N55 2011-6/2013 incl. 1x 200CPI sportkat.

WA500001010a

Fits the following models: BMW M135i(x) F20 / F21 up to year of manufacture 06/2013BMW 335i(x) F30 / F31 / F34 up to model year 06/2013BMW 435i(x) F32 / F33 up to 06/2013 replaces original BMW number: 18328603875 - diameter: Ø 76mm- made of high quality stainless steel SS304- CAD-Designed- 2 Lambda connections- 1x sports catalytic converter: 1x 200CPI- 100% fit, easy to replace against the original part- less thermal load for the turbocharger- power increase due to reduced back pressure- considerable increase in torque- connection diameter Ø 105mm When installing the WAGNER Downpipe, an ECU remapping may be required to prevent an error feeding into the engine management system.NOT EC APPROVED

€925.00

Downpipe kt Audi RS3 8P 2.5 TFSI QUATTRO incl. 2x 100CPI Wagner sportkat.

WA500001003

Fit for: AUDI TTRS 8j/RS3 [8[] with catalytic converter. - Diameter: from 90mm to 2x 70mm- Made of high quality stainless steel 1.4301 (SS304)- Without pre-cat.- 1 Lambda Probe Connection- 2 main Sport Catalysts (100 Cells/inch)- 100% fit, easy to replace against the original part- less thermal stress for the turbocharger- Power increase due to reduced back pressure- considerable torque increase- compatible with the original main catalytic converters. Installation of the WAGNER Downpipe may require an ECU remapping to prevent an error med in the engine management system. NOT EC APPROVED

€1,505.00

Ford Focus MK3 ST250 Wagner Competition Pakket: Intercooler + Downpipe incl. kat.

WA700001058

Ford Focus MK3 ST250 2,0L 184KW/250HP (2012+)

€1,607.00

Ford Focus ST MK3 Wagner Downpipe kit incl. 1x 200CPI sportkat.

WA500001025

Fit for: Ford Focus ST MK3 ST 2.0 Ecoboost 184kW 2012=>ST 2.0 Ecoboost 184kW 2015=> - made of high quality stainless steel 1.4301 (SS304)- diameter before and after cat. Ø 76 mm- CAD-Designed & Flow-optimized- 2 Lambda probe connections- 1 Sport metal catalytic converter (200 CPI, EURO 6 jacket)- 100% fit, easy to replace against the original part- Less thermal load for the turbocharger- Power increase due to reduced back pressure- considerable increase in torque- weight of approx. 5.7 kg When installing the WAGNER Downpipe, an ECU remapping may be required to prevent an error feeding into the engine management system.NOT EC APPROVED

€925.00

Honda Civic FK7 1,5 VTec Turbo Wagner Downpipe kit incl. 1x 300CPSI sportkat.

WA500001029

Fits the following model: Honda Civic FK7 1.5VTec Turbo - made of high quality stainless steel 1.4301 (SS304)- diameter before cat. Ø 85MM, after cat. Ø 76mm- CAD-Designed & Flow-optimized- 2 Lambda probe connections- 1 Sport metal catalytic converter (300 CPI, EURO 6 jacket)- incl. 1x Ø 76mm "after" cat. pipe- 100% fit, easy to replace against original part- Less thermal stress for the turbocharger- Power increase due to reduced back pressure- considerable increase in torque When installing the WAGNER Downpipe, an ECU remapping may be necessary to prevent an error med in the engine management system.NOT EC APPROVED

€1,393.00

Honda Civic Type R FK2 Wagner Downpipe kit incl. 1x 200CPI sportkat. zonder O2 Eliminator

WA500001021.NOO2

Fits the following models Honda Civic Type R type FK2 - made of high quality stainless steel SS304- diameter before cat. Ø 102mm after cat. Ø 76mm- CAD-Designed & Flow-optimized- 2 Lambda connections- Sport metal catalytic converter (200 CPI with EU6 jacket)- 100% fit, easy to replace against the original part- less thermal stress for the turbocharger- power increase due to reduced back pressure- considerable torque increase- weight approx. 5,1kg NOT EG APPROVED

€925.00

Honda Civic Type R FK2 Wagner Downpipe kit incl. 1x 200CPI sportkat.+ O2 Eliminator 300CPI

WA500001021.O300

Fits the following models Honda Civic Type R type FK2 - manufactured from high-grade stainless steel SS304- CAD-Designed & Flow-optimized- 2 Lambda connections- Sport metal catalytic converter (200 CPI with EU6 jacket)- 100% fit, easy to replace against the original part- less thermal stress for the turbocharger- power increase due to reduced back pressure- considerable torque increase- weight approx. 5,1kg NOT EG APPROVED

€986.00

Honda Civic Type R FK2 Wagner Downpipe kit incl. 1x 200CPI sportkat.+ O2 Eliminator 600CPI

WA500001021.O600

€986.00

Intercooler Subaru Impreza WRX STi 2014- Wagner Competition Kit

WA200001115

Subaru WRX Sti 2,5 Turbo 221KW/300HP (2014-)* Not suitable for vehicles with strut brace. The Competition high-performance intercooler has the following net dimensions (530mm x 205mm x 95mm= 10,300cm³) and thus offers a 20% larger inflow area and 86% more charge air volume compared to the original intercooler. A new type of Competition high-performance mesh (Tube Fin) is used here, which was developed directly for the demands of the Subaru WRX STi. The cast aluminum end boxes were created in CAD and optimized for the best possible internal airflow using CFD simulations. The intercooler inlets and outlets were not modified. The intercooler back pressure is identical to the stock intercooler. An anti-corrosion coating with heat conduction properties protects our intercoolers from environmental influences. This guarantees permanent and optimal cooling with a significant increase in performance. Installation is done by replacing the OEM intercooler and is easy to perform (plug and play). All our products are subject to constant qualitative monitoring. Dimensions original intercooler:530mm x 170mm x 61,5mmV=5,54 litersA=901 cm² Dimensions WAGNERTUNING intercooler:530mm x 205mm x 95mmV=10,30 LiterA=1086 cm² Scope of delivery:1 intercooler (black coated)1 air duct1 silicone hose (black)1 mounting material1 assembly instruction Not approved in the area of the STVO.

€803.00

Intercooler A5 F5 2016- 2.0 TFSI, 35TFSI, 40TFSI, 45TFSI Wagner Competition kit

WA200001126a

Competition intercooler kit for Audi A4 B9/A5 F5 suitable for the following vehicles: Audi A4 B9 2,0TFSI ultra 140KW/190hp (2015-2018)Audi A4 B9 2,0TFSI 185KW/252hp (2015-2018)Audi A4 B9 35TFSI 110KW/150hp (2018+)Audi A4 B9 40TFSI 140KW/190hp (2018+)Audi A4 B9 45TFSI 180KW/245hp (2019+)Audi A5 F5 2.0TFSI ultra 140KW/190hp (2016-2018)Audi A5 F5 2.0TFSI 185KW/252hp (2016-2018)Audi A5 F5 35TFSI 110KW/150hp (2018+)Audi A5 F5 40TFSI 140KW/190hp (2018+)Audi A5 F5 45TFSI 180KW/245hp (2019+). The Competition high-performance intercooler has the following mesh dimensions (550mm x 445mm x 70mm = 17,130cc), providing a 134% larger flow area, as well as 105% more charge air volume compared to the original intercooler. The Competition high performance mesh is a high quality Tube Fin mesh with internal turbulators. Despite its size, the total weight of the intercooler is only 9.5kg. The end boxes of the intercooler are made of cast aluminum and have been optimized using flow analysis in the CFD system.The connection diameters are Ø62mm at the intercooler inlet and Ø67mm at the intercooler outlet.The result is excellent cooling properties at lowest backpressure. In addition, all our intercoolers have an anti-corrosion coating with heat conduction properties. This guarantees long-lasting and optimum cooling with a significant increase in performance. Complete ready-to-install kit, simply replace with stock intercooler - plug and play. Tested and pressure stable up to 6 bar. All our products are subject to constant qualitative monitoring. Suitable for racing. Dimensions original intercooler:720mm x 145mm x 80mmV=8,35 LiterA=1044 cm² Dimensions WAGNERTUNING intercooler:550mm x 445mm x 70mmV=17,13 LiterA=2447 cm² Scope of delivery:1 intercooler (black coated)1 silicone hose (black)1 mounting material1 assembly instruction

€1,057.00

Intercooler Audi A1 8X 2010- 1.4 TSI, 2.0 TFSI, 1.6 TDi, 2.0TDi Wagner Competition Kit

WA200001061

The Competition high-performance intercooler has the following net dimensions (590mm x 170mm x 100mm = 10,030cm³) and thus offers a 70% larger inflow area and 112% more charge air volume compared to the original intercooler. The Competition high-performance network offers very good cooling properties. The weight of the intercooler is 6.6kg. CAD designed free-form cast aluminum end boxes for the best possible internal airflow. Overall, this intercooler has less back pressure than the series cooler. In addition, all of our intercoolers have an anti-corrosion coating with thermal conductivity properties. This guarantees optimal cooling with a significant increase in performance. Complete, ready-to-install kit, simply replace with the standard intercooler - plug and play. Tested up to 6 bar and stable under pressure. All of our products are subject to constant quality monitoring. Suitable for racing. The connection diameter is 55mm on both sides. The competition intercooler kit for VAG 1.4 TSI fits in the following vehicles: Audi A1 1.4 TSI 136KW/185PS (2010+) Audi A1 Quattro 2.0TFSI 188KW/256PS (2012) Limited Edition Audi A1 1.6TDI 66-77KW/90-105HP (2011-2014) Audi A1 2.0TDI 105KW/143PS (2011-2014) Skoda Fabia RS 1.4 TSI 132KW/180PS (2010+) Skoda Fabia 1.6TDI 66-77KW/90-105HP (2010-2014) VW Polo 6R GTI 1.4 TSI 132KW/180PS (2010-2014) VW Polo 6R WRC 2.0 TSI 162KW/220PS (2013-2014) VW Polo 6C GTI 1.8 TSI 141KW/192PS (2015+) With slight adjustment work also suitable for the following models Seat Ibiza / Cupra 1.4 TSI /1.8TSI (explanation is on the last page of the installation instructions) Seat Ibiza 1.6/2.0TDI 66-105KW/90-143PS (2009-2015) (explanation is on the last page of the installation instructions) Scope of delivery: 1 intercooler1 assembly instructions

€874.00

Intercooler Audi A1 GB 2018- [GB] 40TFSI 147kw Wagner Competition kit

WA200001152

COMPETITION CHARGE AIR COOLER KIT for VW Polo AW GTI 2,0TSI (147KW/200PS) from 2018. The WAGNERTUNING high-performance charge air cooler features a new type of Competition mesh (Tube Fin) with dimensions of 600 mm x 167 [101] mm x 125 [90] mm [stepped]. This corresponds to an external net volume of 11.14 liters. Thus, the WagnerTuning Competition intercooler for the Polo GTI offers a 24% larger frontal inflow area and 73% more external net volume compared to the original intercooler. The cast aluminum end boxes were designed in CAD and optimized using CFD simulations (for ideal internal airflow). The result is excellent cooling characteristics with the lowest back pressure. Thus, this kit is just right for racing. An optimal cooling of the charged air with a significant increase in performance! An anti-corrosion coating with excellent heat conduction properties protects the WAGNERTUNING intercooler from any environmental influences, as a result of which a lasting and optimal cooling effect can be guaranteed. The assembly takes place at the original mounting points and is easy to perform (plug and play). All our products are subject to constant qualitative monitoring. Inlet diameter Ø60 mm ; outlet diameter Ø60 mm OEM intercooler:700 mm x 115 mm x 80 mmV = 6,44 LA = 805 cm² WAGNERTUNING intercooler:600 mm x 167 [101] mm x 125 [90] mm [stepped]V = 11,14 LA = 1002 cm² Scope of delivery:1 intercooler2 silicone hose1 mounting material1 installation instruction

€925.00

Intercooler Audi A3 8P 2003- 1.6 TDI, 2.0TDI Wagner Competition kit Gen.2

WA200001057

Audi A3 1.6 TDI 77KW/105PS (2009-2013)Audi A3 2.0 TDI 103-125KW/140-170PS (2008-2013) This WAGNERTUNING Competition Intercooler Kit for the VAG 1.6 / 2.0 TDI Engine with Common-Rail Injection fits the following cars.Engine code: CBAA,CBAB, CBAC, CBDB, CBDC, CBBB, CAYC, CLCA,CLCB, CFHC,CFHF, CEGA, CFFB,CFGB, CLJA, CAYB, CFJA, CFJB, CFHC, CJAA, CFGC ? Audi A3 1.6 TDI 77KW/105PS (2009-2013)? Audi A3 2.0 TDI 103-125KW/140-170PS (2008-2013)? Audi TT 2.0 TDI 125KW/170PS (2008-2014) ? VW Golf 6 1.6 TDI 77KW/105PS (2009-2013)? VW Golf 6 2.0 TDI 81-103KW/110-140PS (2008-2012)? VW Golf 6 GTD 125KW/170PS (2009-2012)? VW Jetta 6 1.6TDI 77KW/105PS(2010-2013)? VW Jetta 6 2.0 TDI 103KW/140PS(2010-2013) ?? VW EOS 2.0 TDI 103KW/140PS (2009-2014)? VW Passat B6 (Typ 3C) 1.6 TDI 77KW/105PS (2009-2010)? VW Passat B6 (Typ 3C) 2.0 TDI 103KW - 125KW /140PS - 170PS (2008-2010)? VW Passat B7 2.0TDI 103KW - 130KW /140PS - 177PS (2010-2014) ?? VW Passat CC 2.0 TDI 103KW - 130KW /140PS - 177PS (2008-2016) ?? VW Scirocco 3 2.0 TDI 103KW/140PS (2008-2014)? VW Scirocco 3 2.0 TDI 125KW/170PS (2009-2014)? VW Caddy 2.0 TDI 103KW/140PS (2012-2015)? VW Caddy 2.0 TDI 125KW/170PS (2012-2015)? VW Touran 1.6 TDI 66-77KW/90-105PS (2010-2015)? VW Touran 2.0 TDI 103KW/140PS (2010-2015)? VW Touran 2.0 TDI 125-130KW/170-177PS (2010-2013)? VW Beetle 1.6 TDI 77KW/105PS (2011-2014) ?? VW Beetle 2.0 TDI 81-103KW/110-140PS (2012-2014) ? Skoda Octavia 1.6 TDI 77KW/105PS (2009-2013)? Skoda Octavia 2.0 TDI 103KW/140PS (2010-2013)? Skoda Octavia RS 2.0 TDI 125KW/170PS (2008-2013)? Skoda Superb 1.6 TDI 77KW/105PS (2010-2013)? Skoda Superb 2.0 TDI 103KW/140PS (2010-2013)? Skoda Superb 2.0 TDI 125KW/170PS (2010-2013) ? Seat Leon 1.6 TDI 77KW/105PS (2010-2012)? Seat Leon 2.0 TDI 103KW/140PS (2010-2012)? Seat Leon FR 2.0 TDI 125KW/170PS (2009-2011) Volume: 17.4LWeight: 9.3kg Packaging:Intercooler 610mm x 440mm x 65mm2 silicone hoses4 hose clampsAssembly manual

€996.00

Intercooler Audi A3 8P 2003- 1.8 TFSI, 2.0TFSI Wagner Competition kit Gen.2

WA200001034

The revised Competition Gen.2 intercooler kit for the VAG models with the 2.0T(F)SI 1st & 2nd generation engine. The Competition intercooler has the following mesh dimensions (610mm x 440mm x 65mm / 17.45L), providing a 10% larger flow area and 50% more intercooler volume compared to the original Audi S3 intercooler. The newly developed Competition high-performance mesh still grants enough airflow to the adjacent components, such as the water cooler, and is also very light (S3 OEM 8kg / WAGNERTUNING 9.2kg) . CAD developed freeform end boxes with incorporated cast aluminum air baffle for best possible internal air distribution. The CNC machined hose connections were enlarged to Ø67mm , so this kit comes with matching silicone hoses. Overall this intercooler has far from less back pressure than the stock cooler. In addition, all our intercoolers have an anti-corrosion coating with heat conduction properties. This guarantees optimal cooling with a significant increase in performance.Installation is done by replacing the OEM intercooler and is easy to perform.All our products are subject to constant qualitative monitoring.Available with TÜV parts certificate for many vehicles. The WAGNERTUNING Competition intercooler kit for the VAG 2,0TFSI / TSI engine is suitable for the following vehicles: ? Audi A3 8P 1,8 TFSI 118KW/160PS (2007-2012)? Audi A3 8P 2,0 TFSI 147KW/200PS (2004-2012)? Audi S3 8P 195KW/265PS (2006-2012)? Audi TT 8J 1.8 TSI 118KW/160PS (2008-2014)? Audi TT 8J 2,0 TFSI 147-155KW/200-211PS (2006-2014) (not MKB. CETA; CESA)? Audi TTS 8J 200KW/272PS (2008-2014) (not MKB. CETA; CESA) ? Volkswagen Golf 5 GTI (incl.ED 30) 147-169KW/200-230PS (2004-2008)? Volkswagen Golf 6 GTI (incl.ED 35) (Convertible) 155-173KW/211-235PS (2009-2013)? Volkswagen Golf 6 R (incl. convertible) 199KW/270PS (2009-2013)? Volkswagen Scirocco 3 2.0 TSI 147-162KW/200-220PS (2008-2015)? Volkswagen Scirocco 3 R 195-206KW/265-280PS (2009-2015)? Volkswagen EOS 2.0 TFSI 147KW/200PS (2006-2009)? Volkswagen EOS 2.0 TFSI 155KW/211PS (2009-2014)? Volkswagen Jetta 5 2.0 TFSI 147KW/200PS (2005-2010)? Volkswagen Jetta 6 2.0 TSI 147-155KW/200-211PS (2010-2014)? Volkswagen Passat B6 1.8 TSI 118KW/160PS (2007-2010)? Volkswagen Passat B6 2.0 TSI 147KW/200PS (2005-2010)? Volkswagen Passat B7 1.8 TSI 118KW/160PS (2010-2012)? Volkswagen Passat B7 2.0 TSI 155KW/211PS (2010-2014)? Volkswagen Passat CC 1.8 TSI 118KW/160PS (2008-2012)? Volkswagen Passat CC 2.0 TFSI 147KW/200PS (2008-2010)? Volkswagen Passat CC 2.0 TSI 155KW/211PS (2010-2014)? Volkswagen Beetle 2.0 TSI 147-162KW/200-220PS (2011-) ? Skoda Octavia 1Z 1.8 TSI 118KW/160PS (2008-2013)? Skoda Octavia 1Z MK2 RS 147KW/200PS (2005-2009)? Skoda Octavia 1Z MK2 RS 155KW/211PS (2009-2013)? Skoda Suberb 3T 2.0 TSI 147KW/200PS (2010-2013) ? Seat Leon 1P 1,8 TFSI 118KW/160PS (2009-2012)* ?? Seat Leon 1P 2,0 TFSI 136KW/185PS (2005-2006)* ?? Seat Leon 1P FR 147KW/200PS (2006-2009)* ?? Seat Leon 1P FR 155KW/211PS (2009-2012)* ?? Seat Leon 1P Cupra 177KW/241PS (2007-2011)* ?? Seat Leon 1P Cupra R 195KW/265PS (2009-2012)* ?? Seat Leon 1P Copa Edition 210KW/286PS (2008)* ?? Seat Leon 1P Cupra R310 LE 228KW/310PS (2009-2012)* ?? Seat Leon 1P Cupra R310 WCE 228KW/310PS (2009-2012)* ? * slight modifications to the vehicle necessary Scope of delivery:1 intercooler2 silicone hoses4 hose clamps1 aluminum adapter1 assembly instruction

€996.00

Intercooler Audi A3 8V 2012- 1.8TSI, 2.0TSI Wagner Competition kit

WA200001048

The Competition intercooler has the following net dimensions (640mm x 410mm x 65mm) and thus has 17 liters of external charge air volume (OEM 9 liters). The newly developed Competition high-performance mesh (Tube Fine) grants the adjacent components, such as the water cooler, still enough air flow and is also very light. The intercooler has a total weight of only 8.9kg. The cast aluminum end boxes were created in CAD and optimized for the best possible internal airflow using CFD simulations. An air guide integrated in the end box allows a homogeneous filling of the Competition high performance mesh. The intercooler's inlets and outlets were enlarged to Ø 70mm, so this kit comes with reinforced silicone hoses. Overall, this intercooler has far less back pressure than the stock intercooler. In addition, all our intercoolers have an anti-corrosion coating with heat conduction properties. This guarantees permanent and optimal cooling with a significant increase in performance. The assembly is done by replacing the OEM intercooler and is easy to perform. All our products are subject to constant qualitative monitoring. The WAGNERTUNING Competition intercooler kit for the VAG 1,8TSI - 2,0TSI engine is suitable for the following vehicles: - VW Golf 7+7.5 GTI 2,0 TSI 162-228KW/220-310PS (incl. Facelift- Performance and Clubsport[S] models)- VW Golf 7+7.5 R 2,0 TSI 221-228KW/300-310PS (incl. Facelift models)- VW Arteon 2,0 TSI 140-206KW/190-280PS- Skoda Superb 3V 2,0TSI 162KW/220PS- Skoda Superb 3V 2,0TSI 206KW/280PS With further modifications (see notes) on the vehicle, also suitable for:- Audi A3 8V 1,8TSI 132KW/180PS*- Audi A3 8V 2,0TSI 140KW/190PS*- Audi S3 8V 2,0TSI 221-228KW/300-310PS*- Audi TT 8S 2.0TFSI 169KW / 230PS*- Audi TTS 8S 2.0TSI 228KW/310PS*- Seat Leon 5F Cupra 2,0TSI 195-272KW/265-370PS* (incl. Cupra ST 265-370 & Cupra R)- Skoda Octavia 5E 1,8TSI 132KW/180PS* (incl. Cupra ST 265-370/265-370PS*)- Skoda Octavia 5E RS 2,0TSI 162-180KW/220-245PS* (incl. Cupra ST 265-370PS*) Due to the additional adjustments, the installation effort increases to a total of approx. 5-6hrs: Scope of delivery:1 intercooler2 silicone hoses2 hose clamps1 mounting material1 assembly instruction

€996.00

Intercooler Audi A4 B8 2007- 1.8TFSI, 2.0TFSI: incl. Allroad Wagner Competition kit

WA200001045

The high performance intercooler has the following net dimensions (610mm x 440mm x 65mm = 17.446L), providing 178% more flow area, as well as 158% more intercooler volume compared to the original intercooler. The Competition high performance mesh is a high quality Tube Fin mesh with internal turbulators. As a result, the weight of the intercooler, despite its size, is only 9.1kg. The cast aluminum end boxes were created in CAD and optimized for best possible internal airflow using CFD simulations. An air guide integrated in the end box allows a homogeneous filling of the Competition high performance mesh. The port diameters were increased to Ø67mm, so this kit comes with reinforced silicone hoses. Overall, this intercooler has far less back pressure than the stock intercooler. In addition, all our intercoolers have an anti-corrosion coating with excellent heat conduction properties. This guarantees permanent and optimal cooling with a significant increase in performance. The complete ready-to-install kit, simply replace with the stock intercooler. Tested up to 6 bar and pressure stable. All our products are subject to constant qualitative monitoring. Suitable for racing. The Competition Intercooler Upgrade Kit is suitable for the following vehicles: Audi A4 B8 1,8 TFSI 2008-2013 (MKB:CABA, CDHA, CABB, CABD, CDHB)*.Audi A4 B8 2,0 TFSI 2008-2013 (MKB: CDNB; CAEA; CDNC; CAEB; CFKA)*Audi A4 B8 Allroad 2,0 TFSI 2008-2013 (MKB: CDNB; CAEA; CDNC; CAEB; CFKA)*Audi A5 B8 1,8 TFSI 2008-2013 (MKB:CABA, CDHA, CABB, CABD, CDHB)*Audi A5 B8 2.0 TFSI 2008-2013 (MKB: CDNB; CAEA; CDNC; CAEB; CFKA)*Audi A5 B8 Sportback 1,8 TFSI 2008-2013 (MKB:CABA, CDHA, CABB, CDHB)*Audi A5 B8 Sportback 2,0 TFSI 2008-2013 (MKB: CDNB; CAEA; CDNC; CAEB; CFKA)* * Not suitable in B8.5 Facelift models* For vehicles with dynamic steering, the additional cooling loop must be relocated to a different position. Instructions for this can be found in our installation instructions. Scope of delivery:1 intercooler2 charge air hoses4 hose clamps1 mounting material1 assembly instruction

€905.00

Intercooler Audi A4 B8 2007- 2.0TD: incl. Allroad Wagner Competition kit

WA200001052

The Competition Intercooler Upgrade Kit is suitable for: Audi A4 B8 2,0 TDI 2008-2013 (100-130KW/136-170PS)*Audi A4 B8 Allroad 2,0 TDI 2008-2010 (100-130KW/136-170PS)*Audi A5 2,0 TDI 2008-2012 (100-130KW/136-170PS)*Audi A5 Sportback 2,0 TDI 2008-2012 (100-130KW/136-170PS)* * Not suitable in B8.5 Facelift models* For vehicles with dynamic steering, the additional cooling loop must be relocated to a different position. Please refer to our installation instructions for instructions. The high performance intercooler has the following net dimensions (610mm x 440mm x 65mm = 17,446L) and thus offers a 178% larger flow area, as well as 158% more charge air volume compared to the original intercooler. The Competition high performance mesh is a high quality Tube Fin mesh with internal turbulators. As a result, the weight of the intercooler, despite its size, is only 9.1kg. The cast aluminum end boxes were created in CAD and optimized for the best possible internal airflow using CFD simulations. An air guide integrated in the end box allows a homogeneous filling of the Competition high performance mesh. The port diameters were increased to Ø67mm, so this kit comes with reinforced silicone hoses. Overall, this intercooler has far less back pressure than the stock intercooler. In addition, all our intercoolers have an anti-corrosion coating with excellent heat conduction properties. This guarantees permanent and optimal cooling with a significant increase in performance. The complete ready-to-install kit, simply replace with the stock intercooler. Tested up to 6 bar and pressure stable. All our products are subject to constant qualitative monitoring. Suitable for racing. Scope of delivery:1 intercooler2 charge air hoses4 hose clamps1 mounting material1 assembly instruction

€905.00

Intercooler Audi A4 B8 2007- 2.7 TDi, 3.0TDI: incl. Allroad Wagner Competition kit

WA200001054

The Competition Intercooler Upgrade Kit is suitable for: A4 B8 2,7 TDI (140KW/190hp)*A4 B8 3,0 TDI (176KW/240hp)*A4 B8 3,0 TDI (180KW/245hp)*A4 B8 Allroad 2,7 TDI (140KW/190hp)*A4 B8 Allroad 3.0 TDI (176KW/240hp)*A4 B8 Allroad 3.0 TDI (180KW/245hp)*A5 2.7 TDI (140KW/190hp)*A5 3.0 TDI (176KW/240hp)*A5 3.0 TDI (180KW/245hp)*A5 Sportback 2.7 TDI (140KW/190hp)*A5 Sportback 3.0 TDI (176KW/240hp)*A5 Sportback 3.0 TDI (180KW/245hp)* * For B8.5 Facelift models Part number: 200001123* For vehicles with dynamic steering, the additional cooling loop must be relocated to a different position. Please refer to our installation instructions for instructions. The high performance intercooler has the following net dimensions (610mm x 440mm x 65mm = 17,446L) and thus offers a 178% larger flow area, as well as 158% more charge air volume compared to the original intercooler. The Competition high performance mesh is a high quality Tube Fin mesh with internal turbulators. As a result, the weight of the intercooler, despite its size, is only 9.1kg. The cast aluminum end boxes were created in CAD and optimized for the best possible internal airflow using CFD simulations. An air guide integrated in the end box allows a homogeneous filling of the Competition high performance mesh. The port diameters were increased to Ø67mm, so this kit comes with reinforced silicone hoses. Overall, this intercooler has far less back pressure than the stock intercooler. In addition, all our intercoolers have an anti-corrosion coating with excellent heat conduction properties. This guarantees long-lasting and optimal cooling with a significant increase in performance. The complete ready-to-install kit, simply replace with the stock intercooler. Tested up to 6 bar and pressure stable. All our products are subject to constant qualitative monitoring. Suitable for racing. Scope of delivery:1 intercooler2 charge air hoses4 hose clamps1 mounting material1 assembly instruction

€905.00

Intercooler Audi A4 B8 Facelift 2013- 1.8 TFSI, 2.0 TFSI: incl. Allroad Wagner Competition kit

WA200001132

The high performance intercooler has the following net dimensions (610mm x 440mm x 65mm = 17.446L), providing 178% more flow area, as well as 158% more intercooler volume compared to the original intercooler. The Competition high performance mesh is a high quality Tube Fin mesh with internal turbulators. As a result, the weight of the intercooler, despite its size, is only 9.1kg. The cast aluminum end boxes were created in CAD and optimized for best possible internal airflow using CFD simulations. An air guide integrated in the end box allows a homogeneous filling of the Competition high performance mesh. The port diameters were increased to Ø67mm, so this kit comes with reinforced silicone hoses. Overall, this intercooler has far less back pressure than the stock intercooler. In addition, all our intercoolers have an anti-corrosion coating with excellent heat conduction properties. This guarantees permanent and optimal cooling with a significant increase in performance. The complete ready-to-install kit, simply replace with the stock intercooler. Tested up to 6 bar and pressure stable. All our products are subject to constant qualitative monitoring. Suitable for racing. The Competition Intercooler Upgrade Kit is suitable for the following vehicles: Audi A4 B8.5 1,8 TFSI 2013-2015 (MKB:CJEB/CJED/CJEE)*.Audi A4 B8.5 2.0 TFSI 2013-2015 (MKB:CNCD/CNCE)*Audi A4 B8.5 Allroad 2.0 TFSI 2013-2015 (MKB: CNCD/CNCE)*Audi A5 B8.5 1.8 TFSI 2015- (MKB: CJEB/CJED/CJEE)*Audi A5 B8.5 2.0 TFSI 2013 (MKB: CNCD/CNCE)*Audi A5 B8.5 Sportback 1.8 TFSI 2015- (MKB: CJEB/CJED/CJEE)*Audi A5 B8.5 Sportback 2.0 TFSI 2013- (MKB: CNCD/CNCE)* * For vehicles with dynamic steering, the additional cooling loop must be relocated to a different position. You will find notes on this in our installation instructions. Scope of delivery:1 intercooler2 charge air hoses1 aluminum tube5 hose clamps1 mounting material1 assembly instruction

€996.00

Intercooler Audi A4 B8 Facelift 2013- 2.0 TDI: incl Allroad Wagner Competition kit

WA200001134

The high performance intercooler has the following net dimensions (610mm x 440mm x 65mm = 17.446L), providing 178% more flow area, as well as 158% more intercooler volume compared to the original intercooler. The Competition high performance mesh is a high quality Tube Fin mesh with internal turbulators. As a result, the weight of the intercooler, despite its size, is only 9.1kg. The cast aluminum end boxes were created in CAD and optimized for best possible internal airflow using CFD simulations. An air guide integrated in the end box allows a homogeneous filling of the Competition high performance mesh. The port diameters were increased to Ø67mm, so this kit comes with reinforced silicone hoses. Overall, this intercooler has far less back pressure than the stock intercooler. In addition, all our intercoolers have an anti-corrosion coating with excellent heat conduction properties. This guarantees permanent and optimal cooling with a significant increase in performance. The complete ready-to-install kit, simply replace with the stock intercooler. Tested up to 6 bar and pressure stable. All our products are subject to constant qualitative monitoring. Suitable for racing. The Competition Intercooler Upgrade Kit is suitable for the following vehicles: Audi A4 B8.5 2.0 TDI 2013-2015 (MKB: CJCA, CJCB, CMFA, CGLC, CGLD, CJCC, CMGB, CJCD)*.Audi A4 B8.5 Allroad 2.0 TDI 2013-2015 (MKB: CJCA, CJCB, CMFA, CGLC, CGLD, CJCC, CMGB, CJCD)*Audi A5 B8.5 2.0 TDI 2013- (MKB: CJCA, CJCB, CMFA, CGLC, CGLD, CJCC, CMGB, CJCD)*Audi A5 B8.5 Sportback 2.0 TDI 2013- (MKB: CJCA, CJCB, CMFA, CGLC, CGLD, CJCC, CMGB, CJCD)* * For vehicles with dynamic steering, the additional cooling loop must be relocated to a different position. Please refer to our installation instructions for instructions. Scope of delivery:1 intercooler2 charge air hoses1 aluminum tube5 hose clamps1 mounting material1 assembly instruction

€996.00

Intercooler Audi A4 B9 2015- 2.0 TFSI, 35TFSI, 40TFSI, 45TFSI Wagner Competition kit

WA200001126

€1,057.00

Intercooler Audi A4 B9 2015- 3.0 TDI, 45TDI, 50TDI Wagner Competition kit

WA200001127

Competition intercooler kit for Audi A4 B9/A5 F5 suitable for the following vehicles: Audi A4 B9 3.0.0TDI 160-200KW/218-272hp (2015-2018).Audi A4 B9 45TDI 170KW/231hp (2019+)Audi A4 B9 50TDI 210KW/286hp (2019+)Audi A5 F5 3.0TDI 160-210KW/218-286hp (2017-2018)Audi A5 F5 45TDI 170KW/231hp (2019+)Audi A5 F5 50TDI 210KW/286hp (2019+). The Competition high-performance intercooler has the following mesh dimensions (550mm x 445mm x 70mm = 17,130cc), providing a 134% larger flow area, as well as 105% more charge air volume compared to the original intercooler. The Competition high performance mesh is a high quality Tube Fin mesh with internal turbulators. Despite its size, the total weight of the intercooler is only 9.5kg. The end boxes of the intercooler are made of cast aluminum and have been optimized using flow analysis in the CFD system. The connection diameters are Ø62mm at the intercooler inlet and Ø67mm at the intercooler outlet. The result is excellent cooling properties at lowest backpressure. In addition, all our intercoolers have an anti-corrosion coating with heat conduction properties. This guarantees long-lasting and optimum cooling with a significant increase in performance. Complete ready-to-install kit, simply replace with stock intercooler - plug and play. Tested and pressure stable up to 6 bar. All our products are subject to constant qualitative monitoring. Suitable for racing. Dimensions original intercooler:720mm x 145mm x 80mmV=8,35 LiterA=1044 cm² Dimensions WAGNERTUNING intercooler:550mm x 445mm x 70mmV=17,13 LiterA=2447 cm² Scope of delivery:1 intercooler (black coated)1 silicone hose (black)1 mounting material1 assembly instruction

€1,057.00

Intercooler Audi A5 8T/8F 2007- 1.8TFSI, 2.0TFSI Wagner Competition kit

WA200001045a

€905.00

intercooler Audi A5 8T/8F 2007- 2.0TD Wagner Competition kit

WA200001052a

The Competition Intercooler Upgrade Kit is suitable for: Audi A4 B8 2,0 TDI 2008-2013 (100-130KW/136-170HP)*Audi A4 B8 Allroad 2,0 TDI 2008-2010 (100-130KW/136-170HP)*Audi A5 2,0 TDI 2008-2012 (100-130KW/136-170HP)*Audi A5 Sportback 2,0 TDI 2008-2012 (100-130KW/136-170HP)* * Not suitable in B8.5 Facelift models* For vehicles with dynamic steering, the additional cooling loop must be relocated to a different position. Please refer to our installation instructions for instructions. The high performance intercooler has the following net dimensions (610mm x 440mm x 65mm = 17,446L) and thus offers a 178% larger flow area, as well as 158% more charge air volume compared to the original intercooler. The Competition high performance mesh is a high quality Tube Fin mesh with internal turbulators. As a result, the weight of the intercooler, despite its size, is only 9.1kg. The cast aluminum end boxes were created in CAD and optimized for the best possible internal airflow using CFD simulations. An air guide integrated in the end box allows a homogeneous filling of the Competition high performance mesh. The port diameters were increased to Ø67mm, so this kit comes with reinforced silicone hoses. Overall, this intercooler has far less back pressure than the stock intercooler. In addition, all our intercoolers have an anti-corrosion coating with excellent heat conduction properties. This guarantees permanent and optimal cooling with a significant increase in performance. The complete ready-to-install kit, simply replace with the stock intercooler. Tested up to 6 bar and pressure stable. All our products are subject to constant qualitative monitoring. Suitable for racing. Scope of delivery:1 intercooler2 charge air hoses4 hose clamps1 mounting material1 assembly instruction

€905.00

Intercooler Audi A5 8T/8F 2007- 2.7 TDi, 3.0TDI Wagner Competition kit

WA200001054a

The Competition Intercooler Upgrade Kit suitable for: Audi A4 B8 2,7 TDI (140KW/190HP MKB:CAMA, CGKA)*Audi A4 B8 3,0 TDI (176KW/240HP MKB:CAPA, CCWA)*Audi A4 B8 Allroad 2,7 TDI (140KW/190HP MKB:CAMA, CGKA)*Audi A4 B8 Allroad 3,0 TDI (176KW/240HP MKB:CAPA, CCWA)*Audi A5 B8 2,7 TDI (140KW/190HP MKB:CAMA, CGKA)*Audi A5 B8 3,0 TDI (176KW/240HP MKB:CAPA, CCWA)*Audi A5 Sportback 2,7 TDI (140KW/190HP MKB:CAMA, CGKA)*Audi A5 Sportback 3,0 TDI (176KW/240HP MKB:CAPA, CCWA)* * For B8.5 Facelift models Part number: 200001123* For vehicles with dynamic steering, the additional cooling loop must be relocated to a different position. Please refer to our installation instructions for instructions. The high performance intercooler has the following net dimensions (610mm x 440mm x 65mm = 17,446L) and thus offers a 178% larger flow area, as well as 158% more charge air volume compared to the original intercooler. The Competition high performance mesh is a high quality Tube Fin mesh with internal turbulators. As a result, the weight of the intercooler, despite its size, is only 9.1kg. The cast aluminum end boxes were created in CAD and optimized for best possible internal airflow using CFD simulations. An air guide integrated in the end box allows a homogeneous filling of the Competition high performance mesh. The port diameters were increased to Ø67mm, so this kit comes with reinforced silicone hoses. Overall, this intercooler has far less back pressure than the stock intercooler. In addition, all our intercoolers have an anti-corrosion coating with excellent heat conduction properties. This guarantees permanent and optimal cooling with a significant increase in performance. The complete ready-to-install kit, simply replace with the stock intercooler. Tested up to 6 bar and pressure stable. All our products are subject to constant qualitative monitoring. Suitable for racing. Scope of delivery:1 intercooler2 charge air hoses4 hose clamps1 mounting material1 assembly instruction

€905.00

Intercooler Audi A5 8T/8F Facelift 2013- 1.8 TFSI, 2.0 TFSI Wagner Competition kit

WA200001132a

The high performance intercooler has the following net dimensions (610mm x 440mm x 65mm = 17.446L), providing 178% more flow area, as well as 158% more intercooler volume compared to the original intercooler. The Competition high performance mesh is a high quality Tube Fin mesh with internal turbulators. As a result, the weight of the intercooler, despite its size, is only 9.1kg. The cast aluminum end boxes were created in CAD and optimized for best possible internal airflow using CFD simulations. An air guide integrated in the end box allows a homogeneous filling of the Competition high performance mesh. The port diameters were increased to Ø67mm, so this kit comes with reinforced silicone hoses. Overall, this intercooler has far less back pressure than the stock intercooler. In addition, all our intercoolers have an anti-corrosion coating with excellent heat conduction properties. This guarantees permanent and optimal cooling with a significant increase in performance. The complete ready-to-install kit, simply replace with the stock intercooler. Tested up to 6 bar and pressure stable. All our products are subject to constant qualitative monitoring. Suitable for racing. The Competition Intercooler Upgrade Kit is suitable for the following vehicles: Audi A4 B8.5 1,8 TFSI 2013-2015 (MKB:CJEB/CJED/CJEE)*.Audi A4 B8.5 2.0 TFSI 2013-2015 (MKB:CNCD/CNCE)*Audi A4 B8.5 Allroad 2.0 TFSI 2013-2015 (MKB: CNCD/CNCE)*Audi A5 B8.5 1.8 TFSI 2015- (MKB: CJEB/CJED/CJEE)*Audi A5 B8.5 2.0 TFSI 2013 (MKB: CNCD/CNCE)*Audi A5 B8.5 Sportback 1.8 TFSI 2015- (MKB: CJEB/CJED/CJEE)*Audi A5 B8.5 Sportback 2.0 TFSI 2013- (MKB: CNCD/CNCE)* * For vehicles with dynamic steering, the additional cooling loop must be relocated to a different position. You will find notes on this in our installation instructions. Scope of delivery:1 intercooler2 charge air hoses1 aluminum tube5 hose clamps1 mounting material1 assembly instruction

€996.00

Intercooler Audi A5 8T/8F Facelift 2013- 2.0 TDI Wagner Competition kit

WA200001134a

The high performance intercooler has the following net dimensions (610mm x 440mm x 65mm = 17.446L), providing 178% more flow area, as well as 158% more intercooler volume compared to the original intercooler. The Competition high performance mesh is a high quality Tube Fin mesh with internal turbulators. As a result, the weight of the intercooler, despite its size, is only 9.1kg. The cast aluminum end boxes were created in CAD and optimized for best possible internal airflow using CFD simulations. An air guide integrated in the end box allows a homogeneous filling of the Competition high performance mesh. The port diameters were increased to Ø67mm, so this kit comes with reinforced silicone hoses. Overall, this intercooler has far less back pressure than the stock intercooler. In addition, all our intercoolers have an anti-corrosion coating with excellent heat conduction properties. This guarantees permanent and optimal cooling with a significant increase in performance. The complete ready-to-install kit, simply replace with the stock intercooler. Tested up to 6 bar and pressure stable. All our products are subject to constant qualitative monitoring. Suitable for racing. The Competition Intercooler Upgrade Kit is suitable for the following vehicles: Audi A4 B8.5 2.0 TDI 2013-2015 (MKB: CJCA, CJCB, CMFA, CGLC, CGLD, CJCC, CMGB, CJCD)*.Audi A4 B8.5 Allroad 2.0 TDI 2013-2015 (MKB: CJCA, CJCB, CMFA, CGLC, CGLD, CJCC, CMGB, CJCD)*Audi A5 B8.5 2.0 TDI 2013- (MKB: CJCA, CJCB, CMFA, CGLC, CGLD, CJCC, CMGB, CJCD)*Audi A5 B8.5 Sportback 2.0 TDI 2013- (MKB: CJCA, CJCB, CMFA, CGLC, CGLD, CJCC, CMGB, CJCD)* * For vehicles with dynamic steering, the additional cooling loop must be relocated to a different position. Please refer to our installation instructions for instructions. Scope of delivery:1 intercooler2 charge air hoses1 aluminum tube5 hose clamps1 mounting material1 assembly instruction

€996.00

Intercooler Audi A5 8T/8F Facelift 2013- 3.0 TDI Wagner Competition kit

WA200001123a

The Competition Intercooler Upgrade Kit suitable for: Audi A4 B8.5 3,0 TDI (150KW/204HP MKB: CLAB)*Audi A4 B8.5 3,0 TDI (180KW/245HP MKB: CDUC, CKVC)*Audi A4 B8.5 Allroad 3,0 TDI (150KW/204HP MKB: CLAB)*Audi A4 B8.5 Allroad 3,0 TDI (180KW/245HP MKB: CDUC, CKVC)*Audi A5 B8.5 3,0 TDI (150KW/204HP MKB: CLAB)*Audi A5 B8.5 3,0 TDI (180KW/245HP MKB: CDUC, CKVC)*Audi A5 Sportback 3,0 TDI (150KW/204HP MKB: CLAB)*Audi A5 Sportback 3,0 TDI (180KW/245HP MKB: CDUC, CKVC)* * For vehicles with dynamic steering, the additional cooling loop must be relocated to a different position. You will find instructions in our installation manual. WAGNERTUNING Competition net with high cooling capacity at low weight (9,1kg)CAD designed freeform end boxes made of cast aluminum for best possible internal airflow178% more cooling surface and 158% more volume (net dimensions 610mm x 440mm x 65mm)enormously less backpressure than the series cooleranti-corrosion coating with heat conduction propertiesoptimal cooling with significant power increasecompletely ready-to-install kit, 100% accurate fiteasy to exchange against series intercoolerThe connection diameter is 67mm on both sides. Scope of delivery:1 intercooler2 charge air hoses4 hose clamps1 mounting material1 assembly instruction

€996.00

Filter products

Manufacturer Navigation

Manufacturer A-Z