Competition intercooler kit for Audi A4 B9/A5 F5 suitable for the following vehicles: Audi A4 B9 3.0.0TDI 160-200KW/218-272hp (2015-2018).Audi A4 B9 45TDI 170KW/231hp (2019+)Audi A4 B9 50TDI 210KW/286hp (2019+)Audi A5 F5 3.0TDI 160-210KW/218-286hp (2017-2018)Audi A5 F5 45TDI 170KW/231hp (2019+)Audi A5 F5 50TDI 210KW/286hp (2019+). The Competition high-performance intercooler has the following mesh dimensions (550mm x 445mm x 70mm = 17,130cc), providing a 134% larger flow area, as well as 105% more charge air volume compared to the original intercooler. The Competition high performance mesh is a high quality Tube Fin mesh with internal turbulators. Despite its size, the total weight of the intercooler is only 9.5kg. The end boxes of the intercooler are made of cast aluminum and have been optimized using flow analysis in the CFD system. The connection diameters are Ø62mm at the intercooler inlet and Ø67mm at the intercooler outlet. The result is excellent cooling properties at lowest backpressure. In addition, all our intercoolers have an anti-corrosion coating with heat conduction properties. This guarantees long-lasting and optimum cooling with a significant increase in performance. Complete ready-to-install kit, simply replace with stock intercooler - plug and play. Tested and pressure stable up to 6 bar. All our products are subject to constant qualitative monitoring. Suitable for racing. Dimensions original intercooler:720mm x 145mm x 80mmV=8,35 LiterA=1044 cm² Dimensions WAGNERTUNING intercooler:550mm x 445mm x 70mmV=17,13 LiterA=2447 cm² Scope of delivery:1 intercooler (black coated)1 silicone hose (black)1 mounting material1 assembly instruction

Suitable for the following models:Audi A6 4G (allroad) 3.0 BiTDI 230KW/313HP 2011-2014Audi A6 4G (allroad) 3,0 BiTDI 235-240KW/320-326HP 2014-Audi A7 4G 3.0 BiTDI 230KW/313HP 2011-2014Audi A7 4G 3,0 BiTDI 235-240KW/320-326HP 2014- The high performance intercooler has the following mesh dimensions (610mm x 440mm x 65mm = 17.446L), providing 178% more flow area, as well as 158% more charge air volume compared to the original intercooler. The Competition high performance mesh is a high quality Tube Fin mesh with internal turbulators. As a result, the weight of the intercooler, despite its size, is only 9.1kg. The cast aluminum end boxes were created in CAD and optimized for the best possible internal airflow using CFD simulations. An air guide integrated in the end box allows a homogeneous filling of the Competition high performance mesh. The port diameters were increased to Ø67mm, so this kit comes with reinforced silicone hoses. Overall, this intercooler has far less back pressure than the stock intercooler. In addition, all our intercoolers have an anti-corrosion coating with excellent heat conduction properties. This guarantees permanent and optimal cooling with a significant increase in performance. The complete ready-to-install kit, simply replace with the stock intercooler. Tested up to 6 bar and pressure stable. All our products are subject to constant qualitative monitoring. Suitable for racing. Scope of delivery:1 intercooler2 intercooler hoses [67mm inlet and outlet].4 hose clamps1 mounting material1 assembly instruction

Fits the following models:Audi A6 4G (allroad) 3.0 TDI 150KW/204Pk 2010-2014Audi A6 4G (allroad) 3.0 TDI 160KW/218Pk 2014-Audi A6 4G (allroad) 3.0 TDI 180KW/245Pk 2010-2014Audi A6 4G (allroad) 3.0 TDI 200KW/272PkS 2014-Audi A7 4G 3.0 TDI 150KW/204Pk 2010-2014Audi A7 4G 3.0 TDI 160KW/218Pk 2014-Audi A7 4G 3.0 TDI 180KW/245Pk 2010-2014Audi A7 4G 3.0 TDI 200KW/272PkS 2014-   Notes:May require modification for A6 2.7T V6 with automatic transmission Information:Volume: 2x4.25L (90% more cargo volume)Weight: 2x4.2kg Packaging:2x Intercooler (left/right) 220x215x902x carbon air guide (left/right)1x mounting materialAssembly manual

Audi A6 C8 45TDI 170KW/231HP 2018=>Audi A6 C8 50TDI 210KW/286HP 2018=>Audi A7 C8 45TDI 170KW/231HP 2018=>Audi A7 C8 50TDI 210KW/286HP 2018=> The Competition high performance intercooler has the following mesh dimensions (550mm x 445mm x 70mm = 17,130cc), providing a 134% larger flow area, as well as 105% more charge air volume compared to the original intercooler. The Competition high performance mesh is a high quality Tube Fin mesh with internal turbulators. Despite its size, the total weight of the intercooler is only 9.5kg. The end boxes of the intercooler are made of cast aluminum and have been optimized using flow analysis in the CFD system.The connection diameters are Ø62mm at the intercooler inlet and Ø67mm at the intercooler outlet.The result is excellent cooling properties at lowest backpressure. In addition, all our intercoolers have an anti-corrosion coating with heat conduction properties. This guarantees long-lasting and optimum cooling with a significant increase in performance. Complete ready-to-install kit, simply replace with stock intercooler - plug and play. Tested and pressure stable up to 6 bar. All our products are subject to constant qualitative monitoring. Suitable for racing. Dimensions original intercooler:720mm x 145mm x 80mmV=8,35 LiterA=1044 cm² Dimensions WAGNERTUNING intercooler:550mm x 445mm x 70mmV=17,13 LiterA=2447 cm² Scope of delivery:1 intercooler (black coated)1 silicone hose (black)1 mounting material1 assembly instruction

Audi A6 C8 55TFSI 250KW/340HP 2019=>Audi A7 C8 55TFSI 250KW/340HP 2019=> The Competition high-performance intercooler has the following mesh dimensions (550mm x 445mm x 70mm = 17,130cc), providing a 134% larger flow area, as well as 105% more charge air volume compared to the original intercooler. The Competition high performance mesh is a high quality Tube Fin mesh with internal turbulators. Despite its size, the total weight of the intercooler is only 9.5kg. The end boxes of the intercooler are made of cast aluminum and have been optimized using flow analysis in the CFD system.The connection diameters are Ø62mm at the intercooler inlet and Ø67mm at the intercooler outlet.The result is excellent cooling properties at lowest backpressure. In addition, all our intercoolers have an anti-corrosion coating with heat conduction properties. This guarantees long-lasting and optimum cooling with a significant increase in performance. Complete ready-to-install kit, simply replace with stock intercooler - plug and play. Tested and pressure stable up to 6 bar. All our products are subject to constant qualitative monitoring. Suitable for racing. Dimensions original intercooler:720mm x 145mm x 80mmV=8,35 LiterA=1044 cm² Dimensions WAGNERTUNING intercooler:550mm x 445mm x 70mmV=17,13 LiterA=2447 cm² Scope of delivery:1 intercooler (black coated)1 mounting material1 assembly instruction

Fits the following models: Audi S4 [B5] 2.7 Biturbo 195KW/265PK 1997-2001Audi A6 [C5] 2.7 Biturbo 169-184KW/230-250PK 1997-2005 Notes:May require modification for A6 2.7T V6 with automatic transmission Information:Volume: 2x4.25L (90% more cargo volume)Weight: 2x4.2kg Packaging:2x Intercooler (left/right) 220x215x902x carbon air guide (left/right)1x mounting materialAssembly manual

Fits the following models: Audi S4 [B5] 2.7 Biturbo 195KW/265HP 1997-2001Audi A6 [C5] 2.7 Biturbo 169-184KW/230-250HP 1997-2005 Notes:May require modification for A6 2.7T V6 with automatic transmission Information:Volume: 2x4.25L (90% more cargo volume)Weight: 2x4.2kg Packaging:2x Intercooler (left/right) 220x215x901x mounting materialMounting manual

- Audi Q2 40TFSI 140KW/190HP Please note!!! vehicle modifications required The Competition intercooler has the following net dimensions (640mm x 410mm x 65mm) and thus has 17 liters of external charge air volume (OEM 9 liters). The newly developed Competition high-performance mesh (Tube Fine) still provides sufficient airflow to the adjacent components, such as the water cooler, and is also very light. The intercooler has a total weight of only 8.9kg. The cast aluminum end boxes were created in CAD and optimized for the best possible internal airflow using CFD simulations. An air guide integrated in the end box allows a homogeneous filling of the Competition high performance mesh. The intercooler's inlets and outlets were enlarged to Ø 70mm, so this kit comes with reinforced silicone hoses. Overall, this intercooler has far less back pressure than the stock intercooler. In addition, all our intercoolers have an anti-corrosion coating with heat conduction properties. This guarantees permanent and optimal cooling with a significant increase in performance. The assembly is done by replacing the OEM intercooler and is easy to perform. All our products are subject to constant qualitative monitoring. The WAGNERTUNING Competition intercooler kit for the VAG 1,8TSI - 2,0TSI engine is suitable for the following vehicles: - VW Golf 7+7.5 GTI 2,0 TSI 162-228KW/220-310HP (incl. Facelift- Performance and Clubsport[S], as well as TCR models)- VW Golf 7+7.5 R 2,0 TSI 221-228KW/300-310HP (incl. Facelift models)- VW Arteon 2,0 TSI 140-206KW/190-280HP- Skoda Superb 3V 2,0TSI 162KW/220HP- Skoda Superb 3V 2,0TSI 206KW/280HP With further modifications (see notes) on the vehicle, also suitable for: - Audi A3 8V 1,8TSI 132KW/180HP*- Audi A3 8V 2,0TSI 140KW/190HP*- Audi S3 8V 2,0TSI 221-228KW/300-310HP*- Audi TT 8S 2.0TFSI 169KW/230HP*- Audi TTS 8S 2.0TSI 228KW/310HP*- Seat Leon 5F Cupra 2,0TSI 195-272KW/265-370HP* (incl. Cupra ST 265-370 & Cupra R)- Skoda Octavia 5E 1,8TSI 132KW/180HP* (incl. Cupra ST 265-370/265-370PS*)- Skoda Octavia 5E RS 2,0TSI 162-180KW/220-245HP* (incl. Cupra ST 265-370PS*) Due to the additional adjustments, the installation effort increases to a total of approx. 5-6hrs: Scope of delivery:1 intercooler2 silicone hoses2 hose clamps1 mounting material1 assembly instruction1 TÜV parts certificate

Q5 2.0TFSI (CDNB; CNBC) 2009-2015 132KW/180HPQ5 2.0TFSI (CDNC) 2008-2012 155KW/211HPQ5 2.0TFSI (CNCD) 2012-2015 165KW/225HP The high performance intercooler has the following mesh dimensions (610mm x 440mm x 65mm = 17.446L), providing 178% more flow area, as well as 158% more charge air volume compared to the original intercooler. The Competition high performance mesh is a high quality Tube Fin mesh with internal turbulators. As a result, the weight of the intercooler, despite its size, is only 9.1kg. The cast aluminum end boxes were created in CAD and optimized for the best possible internal airflow using CFD simulations. An air guide integrated in the end box allows a homogeneous filling of the Competition high performance mesh. The port diameters were increased to Ø67mm, so this kit comes with reinforced silicone hoses. Overall, this intercooler has far less back pressure than the stock intercooler. In addition, all our intercoolers have an anti-corrosion coating with excellent heat conduction properties. This guarantees long-lasting and optimal cooling with a significant increase in performance. The complete ready-to-install kit, simply replace with the stock intercooler. Tested up to 6 bar and pressure stable. All our products are subject to constant qualitative monitoring. Suitable for racing. Anti-corrosion coating with heat conduction properties.Optimal cooling with a significant increase in performance.Complete ready-to-install kit, 100% accurate fit.Simply exchange against series intercooler. Scope of delivery:1 intercooler2 charge air hoses4 hose clamps1 mounting material1 assembly instruction

Audi SQ5 3.0BiTDI 8R 230KW/313HP 2012-2015 (CGQB)Audi SQ5 3.0BiTDI Competition 8R 240KW/326HP 2015- (CVUB)Audi SQ5 3.0BiTDI Plus 8R 250KW/340HP 2015- (DEHA)Audi Q5 3.0TDI 8R 180KW/245HP 2011-2014 (CDUD)Audi Q5 3.0TDI 8R 190KW/258HP 2013- (CTBA) The high performance intercooler has the following mesh dimensions (610mm x 440mm x 65mm = 17.446L), providing 178% more flow area, as well as 158% more charge air volume compared to the original intercooler. The Competition high performance mesh is a high quality Tube Fin mesh with internal turbulators. As a result, the weight of the intercooler, despite its size, is only 9.1kg. The cast aluminum end boxes were created in CAD and optimized for the best possible internal airflow using CFD simulations. An air guide integrated in the end box allows a homogeneous filling of the Competition high performance mesh. The port diameters were increased to Ø67mm, so this kit comes with reinforced silicone hoses. Overall, this intercooler has far less back pressure than the stock intercooler. In addition, all our intercoolers have an anti-corrosion coating with excellent heat conduction properties. This guarantees long-lasting and optimal cooling with a significant increase in performance. The complete ready-to-install kit, simply replace with the stock intercooler. Tested up to 6 bar and pressure stable. All our products are subject to constant qualitative monitoring. Suitable for racing.   OEM intercooler: cooling surface 1207,5cm² / charge air volume 9,05LWT Competition LLK: cooling surface 2684cm² / charge air volume 17,4L All our products are subject to constant qualitative monitoring. Scope of delivery:1 intercooler2 intercooler hoses [67mm inlet and outlet]4 hose clamps1 mounting material1 assembly instruction

RS3 8P Sportback 250KW/340HP (2011-2013) The EVO3 intercooler kit for Audi RS3 8P is a further development of the previously known EVO2 intercooler kit. The high performance intercooler has the following net dimensions (515mm x 367[274]mm x 95mm), providing a 120% larger flow area and 142% more charge air volume compared to the original intercooler. The newly developed Competition high-performance mesh grants sufficient airflow to the adjacent components, such as the water cooler, and is also very lightweight. The end boxes of the charge air cooler are made of cast aluminum and were optimized under flow analyses in the CAD system. With the help of incorporated air baffles, in the entrance, is provided for a uniform filling of the intercooler. The result is excellent cooling properties with minimal back pressure. Thus, this kit is exactly the right thing for racing. The intercooler and the original crossmember form a stable unit and weighs only 11.2kg thanks to the new Competition high-performance mesh. The assembly is done at the original mounting points and is easy to perform(1:1 exchange). An optimal cooling of the charged air with a significant increase in performance! The connection diameter is 68mm on both sides. OEM intercooler: cooling surface 856cm² / charge air volume 6,8LWT EVO 1 Performance: cooling surface 856cm² / charge air volume 9,4LWT EVO 2 Competition: cooling surface 1391cm² / charge air volume 13,2LWT EVO 3 Competition: cooling surface 1890cm² / charge air volume 16,5L All our products are subject to constant qualitative monitoring. Scope of delivery:1 intercooler together with the cross bar1 mounting material1 set of license plate holder1 installation instruction

RS3 8P Sportback 250KW/340HP(2011-2013) The high performance intercooler has the following mesh dimensions (535mm x 260mm x 95mm), providing a 62.5% larger flow area and 94% more charge air volume compared to the original intercooler. The new Competition high-performance mesh still grants sufficient airflow to the adjacent components, such as the water cooler, and is also very lightweight. The end boxes of the intercooler are made of cast aluminum and were optimized under flow analyses in the CAD system. This intercooler has hevorragende cooling properties and is just right for racing. The intercooler and the original crossmember form a stable unit and weighs less than 10kg thanks to the new Competition high-performance mesh. The assembly is done at the original mounting points and is easy to perform(1:1 exchange). An optimal cooling of the charged air with a significant increase in performance! All our products are subject to constant qualitative monitoring. Scope of delivery:1 intercooler together with the cross bar1 license plate holder 20° inclined1 assembly instruction Remark:special coatingsuitable for racing  

RS3 8P Sportback 250KW/340HP (2011-2013) The EVO3 intercooler kit for Audi RS3 8P is a further development of the previously known EVO2 intercooler kit. The high performance intercooler has the following net dimensions (515mm x 367[274]mm x 95mm), providing a 120% larger flow area and 142% more charge air volume compared to the original intercooler. The newly developed Competition high-performance mesh grants sufficient airflow to the adjacent components, such as the water cooler, and is also very lightweight. The end boxes of the charge air cooler are made of cast aluminum and were optimized under flow analyses in the CAD system. With the help of incorporated air baffles, in the entrance, a uniform filling of the intercooler is ensured. The result is excellent cooling properties with minimal back pressure. Thus, this kit is exactly the right thing for racing. The intercooler and the original crossmember form a stable unit and weighs only 11.2kg thanks to the new Competition high-performance mesh. The assembly is done at the original mounting points and is easy to perform(1:1 exchange). An optimal cooling of the charged air with a significant increase in performance! The connection diameter is 68mm on both sides. OEM intercooler: cooling surface 856cm² / charge air volume 6,8LWT EVO 1 Performance: cooling surface 856cm² / charge air volume 9,4LWT EVO 2 Competition: cooling surface 1391cm² / charge air volume 13,2LWT EVO 3 Competition: cooling surface 1890cm² / charge air volume 16,5L All our products are subject to constant qualitative monitoring. Scope of delivery:1 intercooler together with the cross bar1 mounting material1 set of license plate holder1 installation instruction

Product video: http://www.youtube.com/watch?v=JGpgXoWxs3c&feature=youtu.be The high performance intercooler has the following external mesh dimensions (535mm x 160mm x 110mm), providing 40% more charge air volume compared to the original intercooler. The newly developed Competition high-performance mesh offers the highest cooling properties at the cutting edge of tube-fin technology. The weight of the intercooler is 6.7kg. CAD designed freeform cast aluminum end boxes for best possible internal airflow. Overall this intercooler has far less back pressure than the stock intercooler. In addition, all our intercoolers have an anti-corrosion coating with heat conduction properties. This guarantees optimal cooling with a significant increase in performance. The installation is done by replacing the OEM intercooler - plug & play - the original intercooler hoses can still be used. All our products are subject to constant qualitative monitoring. The Competition Gen.2 Intercooler Upgrade Kit EVO 1 fits the following vehicles. Audi TTRS 8J 250KW/340HP (2009-2014)Audi TTRS plus 8J 265KW/360HP (2009-2014)Audi RS3 8P Sportback 250KW/340HP (2011-2013) Scope of delivery:1 intercooler1 assembly instruction

RS3 2.5 TFSI 270kw/367HP 2015- ACC holder for model with Adaptive Cruise Control (ACC)Only fits in combination with EVO 3 Competition kit 200001081 Packing:1x aluminum holder (black coated)mounting materialAssembly manual

EVO 3.X with a new network variant for models from 600 hp Audi RS3 8V Sportback 270KW/367HP 04/2015-04/2016 (*not compatible for vehicles with Adaptive Cruise Control)Audi RS3 8V Sportback/Sedan 294KW/400HP 08/2017+ The high-performance intercooler has the following net dimensions (515mm x 367mm x 95mm [stepped] = 16.5L) and thus offers an 84% larger inflow area and 101% more charge air volume compared to the original intercooler. The newly developed Competition high-performance network provides the adjacent components, such as the water cooler, with sufficient airflow. It is a high quality tube fin mesh with internal turbulators. The end boxes of the intercooler are made of cast aluminum and have been optimized using flow analyzes in the CFD system. With the help of integrated air baffles in the inlet, the charge air cooler is filled evenly. The result is excellent cooling properties with the lowest back pressure. This kit is therefore ideal for racing. In addition, all of our intercoolers have an anti-corrosion coating with thermal conductivity properties. This guarantees permanent and optimal cooling with a significant increase in performance. The intercooler and the crossbar form a stable unit and, thanks to the new Competition high-performance network, weigh only 14.3kg. The assembly takes place at the original attachment points and is easy to carry out (1:1 exchange). Tested up to 6 bar and stable under pressure. All of our products are subject to constant quality monitoring.OEM intercooler:Cooling surface 102400mm² LCharge air volume 8.2LInlet and outlet Ø68mm WT EVO 3 Competition:Cooling surface 189,000mm²Charge air volume 16.5LInlet and outlet Ø68mm Note:v- optional with additional bracket for facelift models with Adaptive Cruise Control ACC (recalibration of the ACC may be necessary) Scope of delivery:1 intercooler together with the crossbeam1 mounting material1 installation instructions1 TÜV parts certificate