WAGNER Intercoolers zijn leverbaar als Performance en Competition. Het verschil zit in het type gebruikte gaas. Bij de Performance is dat "Bar & Plate" en bij de Competition "Tube Fin".
Daarnaast zijn er nog 3 verschillende volumes: EVO1, EVO2 en EVO3.
EVO1 is ontwikkeld om gebruikt te worden in combinatie met de originele turbolader met als resultaat een zeer efficiënte koeling van de inlaatlucht. EVO2 en EVO3 hebben een grotere volume en gaan prima samen met de toename van inlaatlucht na een turbolader upgrade. Afhankelijk van het systeem worden ook de in- en uitlaat diameters vergroot.
Deze intercoolers worden met de benodigde siliconen slangen geleverd.
Intercooler BMW X6 E71/F16 Wagner Competition kit
Competition intercooler kit for BMW X5 and X6 models from the E-series or F-series. The high performance intercooler has the net dimensions 535mm x 332mm x 150mm (stepped 19.2L) and thus offers a 113.5% larger flow area, as well as 120% more charge air volume compared to the original intercooler. The Competition high performance mesh is a high quality Tube Fin mesh with internal turbulators. Despite its size, the total weight of the intercooler is only 12.5kg. The end boxes of the intercooler are made of cast aluminum and have been optimized using flow analysis in the CFD system. This intercooler causes far less back pressure than the stock intercooler. In addition, all our intercoolers have an anti-corrosion coating with heat conduction properties. This guarantees a durable and optimal cooling with a significant increase in performance. Complete ready-to-install kit, simply replace with stock intercooler - plug and play. The original charge air hoses can still be used. Tested up to 6 bar and pressure stable. All our products are subject to constant qualitative monitoring. The Competition intercooler fits in the following vehicles: BMW X5 E70 3.0d / 3.0sd (2006-2010).BMW X5 E70 LCI 30dX / 35dX / 35iX / 40dX / 40iX (2009-2013)BMW X6 E71 30dX / 35dX / 35iX / 40dX / 40iX (2007-2014)BMW X5 F15 25d / 25dX / 28iX / 30dX / 35dX / 35i / 35iX / 40dX / 40eX (2012-2018)BMW X6 F16 28iX / 30dX / 35i / 35iX / 40dX (2013-2018) Scope of delivery:1 intercooler1 mounting material1 assembly instruction
Intercooler BMW Z4 E89 2009 35i, 35is Wagner Performance kit Evo 1
The intercooler EVO 1 has the following net dimensions (520x210x130/staged 11,750cm³) and thus offers an 85% larger flow area, as well as 60% more charge air volume compared to the original intercooler. The Performance high performance mesh is a high quality bar and plate mesh with very good cooling properties. Due to the high material content, the performance version has a weight of 9.0kg. The end boxes of the intercooler are made of cast aluminum and were optimized with the help of flow analyses in the CFD system. The EVO 1 intercooler kit is suitable for the first power stages of the BMW 35i engines. This intercooler causes less back pressure than the stock intercooler. In addition, all our intercoolers have an anti-corrosion coating with heat conduction properties. This guarantees long-lasting and optimal cooling with a significant increase in performance. Complete ready-to-install kit, simply replace with stock intercooler - plug and play. The original charge air hoses can still be used. Tested up to 6 bar and pressure stable. All our products are subject to constant qualitative monitoring. The Performance Intercooler Kit EVO 1 fits the following vehicles with N54 & N55 engines. BMW 135i E82/E88 2006-2013BMW 1erM E82 2011-2013BMW 335 (x)i E90/E91/E92/93 2006-2011BMW 335is E92 2009-2013BMW Z4 18i (N20) E89 2011-2016BMW Z4 20i (N20) E89 2011-2016BMW Z4 28i (N20) E89 2001-2016BMW Z4 35i E89 2009-2016BMW Z4 35is E89 2010-2016 Scope of delivery:1 intercooler1 mounting material1 assembly instruction
Intercooler BMW Z4 E89 2009- 35i, 35is Wagner Competition kit Evo 2
The Competition intercooler has the following net dimensions (520mm x 210mm x 150mm / stepped = 13,572 cc) and thus offers an 85% larger inflow area and 90% more charge air volume compared to the original intercooler. The newly developed Competition high-performance mesh still grants sufficient airflow to the adjacent components, such as the water cooler, and is also very light (7.4kg). CAD-developed free-form cast aluminum end boxes for the best possible internal airflow. Overall, this intercooler has far less back pressure than the stock intercooler. In addition, all our intercoolers have an anti-corrosion coating with heat conduction properties. This guarantees optimal cooling with a significant increase in performance. Installation is done by replacing the OEM intercooler and is easy to perform. All our products are subject to constant qualitative monitoring. The Competition Intercooler Kit EVO II fits the following vehicles: BMW Z4 35i E89 2009+BMW Z4 35is E89 2010+ Scope of delivery:1 intercooler1 silicone hose inlet, reinforced version1 silicone hose outlet, reinforced version1 set of 12mm stainless steel Norma clamps1 mounting material
Intercooler BMW Z4 E89 2009- 35i, 35is Wagner Competition kit Evo 3
Competition Intercooler Kit EVO3 for BMW E89 Z4 35i(s). The high performance intercooler features mesh dimensions of 510mm x 303mm x 180mm (stepped 20.65L), providing a 162% larger flow area, as well as 182% more intercooler volume compared to the original intercooler. The Competition high performance mesh is a high quality Tube Fin mesh with internal turbulators. Despite its size, the total weight of the intercooler is only 13.2kg. The end boxes of the intercooler are made of cast aluminum and have been optimized using flow analysis in the CFD system. The intercooler kit EVO3 was developed directly for the high demands of the large tuning levels on the BMW Z4 35i(s). The original click connections were eliminated and the connection diameters at the inlet and outlet were expanded to Ø70mm. Therefore, the kit includes two reinforced silicone hoses. The result is excellent cooling properties with the lowest back pressure. In addition, all our intercoolers have an anti-corrosion coating with heat conduction properties. This guarantees long-lasting and optimum cooling with a significant increase in performance. Complete ready-to-install kit, simply replace with stock intercooler - due to the extreme size, minor adjustments to the radiator support are necessary. Tested up to 6 bar and pressure stable. All our products are subject to constant qualitative monitoring. Suitable for racing. The intercooler kit EVO III Competition fits the following vehicles with N54 & N55 engines: BMW Z4 35i E89 2009+BMW Z4 35is E89 2010+ Scope of delivery:1 intercooler2 silicone hoses1 mounting material1 assembly instruction
Intercooler BMW Z4 G29 2019- M40i Inlaat spruitstuk met geintegr. intercooler EVO 1 + brandstofrail
BMW 4-series G22/G23/G26 M440i Advantages of this product:- significantly better cooling performance (up to 20°C cooler IAT)- maximum mechanical discharge of the turbocharger (35% less back pressure)- more power and torque for your engine- 100% pressure resistance- 100% Plug and Play (no modifications)- preprocessed port fuel injection (fuel rail optionally available)- three 1/8 NPT ports for measuring additional parameters- six preprocessed NOS or WMI ports- this intake manifold is suitable for all performance levels- up to 4 years warranty
Intercooler BMW Z4 G29 2019- M40i Inlaat spruitstuk met geintergreerde Wagner intercooler EVO 1
BMW 4-series G22/G23/G26 M440i Advantages of this product:- significantly better cooling performance (up to 20°C cooler IAT)- maximum mechanical discharge of the turbocharger (35% less back pressure)- more power and torque for your engine- 100% pressure resistance- 100% Plug and Play (no modifications)- preprocessed port fuel injection (fuel rail optionally available)- three 1/8 NPT ports for measuring additional parameters- six preprocessed NOS or WMI ports- this intake manifold is suitable for all performance levels- up to 4 years warranty
Intercooler BMW Z4 G29 2019- M40i Wagner Competition Watercooler Kit
BMW Z4 G29 M40i 3.0L 250KW/340PS from 2019- (for OPF Model only) Dimensions:OEM Cooler:576 mm x 495 mm x 27 mmV = 7.70 LiterA = 2851 cm² Wagnertuning cooler:524 mm x 468 mm x 68 mmV = 16.70 LiterA = 2454 cm² Watch this video for a video impression: https://www.youtube.com/watch?v=mrbZqrNhHBU
Intercooler Cupra Formentor VZ 2.0TSI 180/228kW Wagner Competition kit
Cupra Formentor VZ 2.0TSI 180kW / 245HPCupra Formentor VZ 2.0TSI 228kW / 310HP Volume: 17.7L ( OEM 9L)Weight: 9.2kg Packaging:Intercooler 620mm x 440mm x 65mm2 silicone hoses4 hose clampsmounting material
Intercooler Cupra Formentor VZ5 2.5TFSi Wagner Competition kit
Cupra Formentor VZ5 2.5TFSi Volume: 17.7L ( OEM 9L)Weight: 9.2kg Packaging:Intercooler 620mm x 440mm x 65mm2 silicone hoses4 hose clampsmounting material
Intercooler FIat Abarth 500 1,4 Turbo 99 kW/135 Pk (2008-) Wagner Competition kit
Competition intercooler kit for Fiat 500 Abarth The WAGNERTUNING high performance intercooler has a new competition net (Tube Fin) with the dimensions 600 mm x 204,6 mm x 80 mm (9.8 liters), which was developed especially for the demands of the Fiat 500 Abarth. This high performance net offers an 85% larger flow area, as well as 131% more net volume compared to the original intercoolers. The cast aluminum end boxes were designed in CAD and optimized using CFD simulations (for ideal internal airflow). For the best possible heat exchange, the WAGNERTUNING high performance intercooler is installed in the front of the vehicle, replacing the two original side coolers. Together with the WAGNERTUNING silicone hoses, the newly developed elliptical hose connection at the outlet of this charge air cooler allows a maximum possible reduction of the charge air distance. As a result, and due to the generally lower back pressure of the charge air system (see diagram), the general response behavior could be significantly improved. An anti-corrosion coating with heat conduction properties protects the WAGNERTUNING intercooler from any environmental influences, as a result of which a permanent and optimal cooling effect can be guaranteed. The installation is done by replacing the original intercooler and is easy to perform (plug and play). All our products are subject to constant qualitative monitoring. Dimensions of the original intercooler (2x):190 mm x 175 mm x 64 mmV = 4,3 litersA = 665 cm² Dimensions of the WAGNERTUNING intercooler:600 mm x 204.6 mm x 80 mmV = 9.8 litersA = 1227 cm² Scope of delivery:1 intercooler (black coated)1 crossbar (black coated)2 silicone hoses (black)1 mounting material1 assembly instruction
Intercooler Fiat Abarth 500 1,4 Turbo 99 kW/135 Pk AUTOMAAT (2008-) Wagner Competition kit
Competition intercooler kit for Fiat 500 Abarth The WAGNERTUNING high performance intercooler has a new competition net (Tube Fin) with the dimensions 600 mm x 204,6 mm x 80 mm (9.8 liters), which was developed especially for the demands of the Fiat 500 Abarth. This high performance net offers an 85% larger flow area, as well as 131% more net volume compared to the original intercoolers. The cast aluminum end boxes were designed in CAD and optimized using CFD simulations (for ideal internal airflow). For the best possible heat exchange, the WAGNERTUNING high performance intercooler is installed in the front of the vehicle, replacing the two original side coolers. Together with the WAGNERTUNING silicone hoses, the newly developed elliptical hose connection at the outlet of this charge air cooler allows a maximum possible reduction of the charge air distance. As a result, and due to the generally lower back pressure of the charge air system (see diagram), the general response behavior could be significantly improved. An anti-corrosion coating with heat conduction properties protects the WAGNERTUNING intercooler from any environmental influences, as a result of which a permanent and optimal cooling effect can be guaranteed. The installation is done by replacing the original intercooler and is easy to perform (plug and play). All our products are subject to constant qualitative monitoring. Dimensions of the original intercooler (2x):190 mm x 175 mm x 64 mmV = 4,3 litersA = 665 cm² Dimensions of the WAGNERTUNING intercooler:600 mm x 204.6 mm x 80 mmV = 9.8 litersA = 1227 cm² Scope of delivery:1 intercooler (black coated)1 crossbar (black coated)2 silicone hoses (black)1 mounting material1 assembly instruction
Intercooler Ford F 150 (2015-2016) Wagner Competition kit
Intercooler Upgrade Kit for Ford (USA) F-150 3.5l ecoboost (2015-2016) / F-150 2.7 liter Ecoboost The high performance intercooler has the following mesh dimensions (500x388x125/stepped), providing a 62% larger flow area, as well as 108% more intercooler volume compared to the original intercooler. The new Competition high-performance mesh still grants sufficient airflow to the adjacent components, such as the water cooler, and is also very lightweight. The end boxes of the charge air cooler are made of cast aluminum and were optimized under flow analyses in the CAD system. Due to the lower back pressure of 50%, this intercooler is the best choice when it comes to low intake temperatures. Easy installation and quality are convincing. An optimal cooling of the supercharged air with a significant increase in performance! All our products are subject to constant qualitative monitoring.OEM intercooler:Cooling surface 1200cm²Charge air volume 9,6L WAGNERTUNING intercooler:Cooling surface 1940cm²Charge air volume 19,9L Scope of delivery:1 intercooler1 silicone hose1 mounting material
Intercooler Ford F 150 (2017-) Wagner Competition kit
Intercooler upgrade kit for Ford (USA) F-150 3.5l Ecoboost (2017 -) with 10 speed automatic transmission. The high performance intercooler has the following mesh dimensions (500x388x125/stepped), providing a 62% larger flow area, as well as 108% more charge air volume compared to the original intercooler. The new Competition high-performance mesh still grants sufficient airflow to the adjacent components, such as the water cooler, and is also very lightweight. The end boxes of the charge air cooler are made of cast aluminum and were optimized under flow analyses in the CAD system. Due to the lower back pressure of 50%, this intercooler is the best choice when it comes to low intake temperatures. Easy assembly and quality are convincing. The kit includes additional mounting material to relocate the original oil cooler. An optimal cooling of the charged air with a significant increase in performance!All our products are subject to constant qualitative monitoring. OEM intercooler:Cooling surface 1200cm²Charge air volume 9,6L WAGNERTUNING intercooler:Cooling surface 1940cm²Charge air volume 19,9L Scope of delivery:1 intercooler1 silicone hose1 mounting material
Intercooler Ford F 150 Raptor (2017-) Wagner Competition kit
Intercooler upgrade kit for Ford (USA) F-150 Raptor 3.5l Ecoboost with 10 speed automatic transmission. The high performance intercooler has the following mesh dimensions (500mmx388mmnx125mm/stepped), providing 62% more flow area, as well as 108% more charge air volume compared to the original intercooler. The new Competition high-performance mesh still grants enough airflow to the adjacent components, such as the water cooler, and is also very lightweight. The end boxes of the charge air cooler are made of cast aluminum and were optimized under flow analyses in the CAD system. The lower back pressure of 50% makes this intercooler the best choice when it comes to low intake temperatures. Easy assembly and quality are convincing. The kit includes additional mounting material to relocate the original oil cooler and to adapt the original fan frame. An optimal cooling of the charged air with a significant increase in performance! All our products are subject to constant qualitative monitoring. OEM intercooler:Cooling surface 120.000mm²Charge air volume 9,6L WAGNERTUNING intercooler:Cooling surface 194.000mm²Charge air volume 19,9L Scope of delivery:1 intercooler1 silicone hose1 mounting material
![Intercooler Ford Fiesta ST 180 ST 200 1,6L EcoBoot [MK7] Wagner Competition intercooler](https://carfantasy.nl/media/aa/d6/d2/1719321071/200001070.jpg?ts=1727536631 "200001070")
![Intercooler Ford Fiesta ST 180 ST 200 1,6L EcoBoot [MK7] Wagner Competition intercooler](https://carfantasy.nl/media/61/9c/2a/1720401825/200001070_4.jpg?ts=1727536631 "200001070_4")
Intercooler Ford Fiesta ST 180 ST 200 1,6L EcoBoot [MK7] Wagner Competition intercooler
Intercooler Upgrade Kit for Ford Fiesta ST180 ST200 1,6l EcoBoost The high performance intercooler has the following net dimensions 670mm x270mm x70mm /stepped = 9,6Liter. This results in a 100% larger flow area, as well as 113% more charge air volume compared to the original intercooler. The new Competition high performance mesh still allows enough airflow to the adjacent components, such as the water cooler. The weight of the intercooler is 6.8kg. This unique intercooler kit impresses with CAD developed freeform end boxes made of cast aluminum for best possible internal airflow and a pressure resistance of up to 6bar (tested). An easy assembly and top quality that will convince you. In addition, all our intercoolers have an anti-corrosion coating with heat conduction properties. All this guarantees optimal cooling with a significant increase in performance. You get here a complete ready-to-install kit, simply replace against series intercoolers. All our products are subject to constant qualitative monitoring. Suitable for racing. The connection diameter is 65mm on both sides. Dimensions original intercooler:690x130x50V=4,5literA=900qcm Dimensions WAGNERTUNING EVO1 intercooler:670x270x70/steppedV=9,6LiterA=1800qcm Scope of delivery:1 intercooler black coated1 mounting material1 installation instruction
![Intercooler Ford Fiesta ST [MK8] Wagner Competition kit](https://carfantasy.nl/media/fe/f1/77/1719668905/200001149.jpg?ts=1727536631 "200001149")
![Intercooler Ford Fiesta ST [MK8] Wagner Competition kit](https://carfantasy.nl/media/60/7c/fb/1720303193/200001149_3.jpg?ts=1727536631 "200001149_3")
Intercooler Ford Fiesta ST [MK8] Wagner Competition kit
COMPETITION CHARGE AIR COOLER KIT for Ford Fiesta ST MK8 The WAGNERTUNING high-performance charge air cooler has a new type of Competition mesh (Tube Fin) with the dimensions 620 mm x 390 mm x 56 mm. This corresponds to an external net volume of 13.5 liters. Thus, the WagnerTuning Competition intercooler for the Ford Ford Fiesta ST offers a 150% larger frontal inflow area and 86% more external net volume compared to the original intercooler. The cast aluminum end boxes were designed in CAD and optimized using CFD simulations (for ideal internal airflow). With the help of an air guide incorporated inside the cooler inlet, a uniform filling of the intercooler network is ensured. The result is outstanding cooling properties with minimal backpressure. In addition, the newly developed Competition high-performance mesh still provides sufficient airflow to the adjacent components, such as the water cooler, and is also very lightweight. Thus, this kit is just right for racing. An optimal cooling of the charged air with a significant increase in performance! An anti-corrosion coating with excellent heat conduction properties protects the WAGNERTUNING intercooler from any environmental influences, as a result of which a lasting and optimal cooling effect can be guaranteed. The assembly takes place at the original mounting points and is easy to perform (plug and play). All our products are subject to constant qualitative monitoring. Inlet diameter Ø67 mm (OEM click connection); outlet diameter Ø61 mm (OEM click connection) OEM intercooler:690 mm x 140 mm x 75 mmV = 7,25 LA = 966 cm² WAGNERTUNING intercooler:620 mm x 390 mm x 56 mmV = 13,5LA = 2418 cm² Scope of delivery:1 intercooler1 mounting material1 installation instruction
![Intercooler Ford Focus 1,6 Ecoboost [MK3] Wagner Competition kit](https://carfantasy.nl/media/cb/f1/1d/1719593357/200001104_3-2.jpg?ts=1727536631 "200001104_3-2")
![Intercooler Ford Focus 1,6 Ecoboost [MK3] Wagner Competition kit](https://carfantasy.nl/media/23/cf/cd/1719705303/200001104_1-2.jpg?ts=1727536631 "200001104_1-2")
Intercooler Ford Focus 1,6 Ecoboost [MK3] Wagner Competition kit
Comp. intercooler kit Ford Focus MK3 1,6 Ecoboost The Competition high performance intercooler has the following net dimensions (640mm x 200mm x 110mm = 14.080cm³) and thus offers a 21% larger flow area as well as 235% more charge air volume compared to the original intercooler. The Competition high-performance mesh offers very good cooling properties. The weight of the intercooler is 10.3kg. CAD designed freeform cast aluminum end boxes for best possible internal airflow. Overall, this intercooler has much less back pressure than the stock intercooler. In addition, all our intercoolers have an anti-corrosion coating with heat conduction properties. This guarantees optimal cooling with a significant increase in performance. Complete ready-to-install kit, simply replace with stock intercooler - plug and play. Tested up to 6 bar and pressure stable. All our products are subject to constant qualitative monitoring. Suitable for racing. The connection diameter is Ø50mm on both sides. Dimensions original intercooler:660mm x 160mm x 40mmV=4,2 litersA=1056cm² Dimensions WAGNERTUNING intercooler:640mm x 200mm x 110mmV=14,08 LiterA=1280 cm² Scope of delivery:1 intercooler1 mounting material1 assembly instruction
![Intercooler Ford Focus RS [MK2] Wagner Performance kit](https://carfantasy.nl/media/37/25/22/1719227713/200001028-1.jpg?ts=1727536631 "200001028-1")
![Intercooler Ford Focus RS [MK2] Wagner Performance kit](https://carfantasy.nl/media/fa/e1/b0/1720391576/200001028-temp.jpg?ts=1727536631 "200001028-Temp")
Intercooler Ford Focus RS [MK2] Wagner Performance kit
Ford Focus RS MK 2 2009-2010Ford Focus RS 500 MK 2 2009-2010 The Performance High Performance Intercooler has the following mesh dimensions (730mm x 300mm x 70mm = 15.3 liters), providing 100% more flow area, as well as 125% more charge air volume compared to the original intercooler. The performance intercooler offers very good cooling characteristics. The weight of the intercooler is 10.7kg. CAD designed cast aluminum freeform end boxes for best possible internal airflow. Overall, these intercoolers have less back pressure than the stock intercooler. In addition, all our intercoolers have anti-corrosion coating with heat conduction properties. This guarantees optimal cooling with a significant increase in performance. Complete ready-to-install kit,simply replace with stock intercooler. Tested and pressure stable up to 6 bar. All our products are subject to constant qualitative monitoring. Scope of delivery:1 intercooler1 Carbon air guide1 mounting material1 assembly instruction
![Intercooler Ford Focus RS [MK3] Wagner Competition kit](https://carfantasy.nl/media/b4/51/ed/1719340454/200001090.jpg?ts=1727536631 "200001090")
![Intercooler Ford Focus RS [MK3] Wagner Competition kit](https://carfantasy.nl/media/9a/43/39/1719155699/200001090_1.jpg?ts=1727536631 "200001090_1")
Intercooler Ford Focus RS [MK3] Wagner Competition kit
Competition Intercooler Kit Ford Focus RS MK3 The Competition high performance intercooler has the following net dimensions (630mm x 215mm x 125mm = 16.931cm³) and thus offers a 10% larger flow area and 72% more charge air volume compared to the original intercooler. The newly developed Competition high-performance mesh is very light, so the complete intercooler weighs only 9.2kg. The end boxes of the intercooler are made of cast aluminum and were optimized under flow analyses in the CAD system. With the help of incorporated air baffles, in the inlet, a uniform filling of the intercooler is ensured. The connection diameters at the inlet and outlet were expanded to 70mm. Therefore, the kit includes two reinforced silicone hoses. The result is excellent cooling properties at lowest backpressure. Thus, this kit is just right for racing. The assembly is done at the original mounting points and is easy to perform(1:1 exchange). An optimal cooling of the charged air with a significant increase in performance! All our products are subject to constant qualitative monitoring. Dimensions original intercooler:615mm x200mm x 80mmV=9,84 litersA=1230 cm² Dimensions WAGNERTUNING intercooler:630mm x 215mm x125mmV=16,9 LiterA=1355 cm² Scope of delivery:1 intercooler2 silicone hoses1 mounting material1 assembly instruction
Intercooler Ford Focus ST 2.3 [MK4} Wagner Performance kit
OEM Intercooler:V=5.5 Liter WAGNERTUNING Intercooler:720mm x 201mm x 130mmV=15.4 Liter Packaging:1 Intercooler2 silicone hoses4 clamps1 assembly manual1 mounting material
Intercooler Ford Focus ST 2005-2010 [MK2} Wagner Performance kit
-Ford Focus ST MK 2 2008-2010-For facelift models of the Ford Focus ST MK 2 My. 2005-2008 The performance high performance intercooler has the following net dimensions (730mm x 300mm x 70mm = 15.3 liters) and thus offers a 100% larger inflow area, as well as 125% more charge air volume compared to the original intercooler. The performance intercooler offers very good cooling characteristics. The weight of the intercooler is 10.7kg. CAD designed cast aluminum freeform end boxes for best possible internal airflow. Overall, these intercoolers have less back pressure than the stock intercooler. In addition, all our intercoolers have anti-corrosion coating with heat conduction properties. Extended connection diameter to 66mm and including reinforced silicone hoses. This guarantees optimal cooling with a significant increase in performance. Complete ready to install kit,easily replace with stock intercooler. Tested up to 6 bar and pressure stable. All our products are subject to constant qualitative monitoring. Scope of delivery:1 intercooler2 silicone hoses2 hose clamps1 mounting material1 assembly instruction
![Intercooler Ford Focus ST250 [MK3] Wagner Competition intercooler](https://carfantasy.nl/media/5e/27/8f/1720077125/01aqs9o1meduyci.jpg?ts=1727536631 "01AqS9o1MEduYci")
![Intercooler Ford Focus ST250 [MK3] Wagner Competition intercooler](https://carfantasy.nl/media/26/bc/1d/1720597855/06.jpg?ts=1727536631 "06")
Intercooler Ford Focus ST250 [MK3] Wagner Competition intercooler
The Competition high-performance intercooler has the following net dimensions (640mm x 200mm x 110mm = 14,080cm³) and thus offers a 24% larger inflow area and 60% more charge air volume compared to the original intercooler. The Competition high-performance mesh offers very good cooling properties. The weight of the intercooler is 10.5kg. CAD designed freeform cast aluminum end boxes for best possible internal airflow. Overall, this intercooler has much less back pressure than the stock intercooler. In addition, all our intercoolers have an anti-corrosion coating with heat conduction properties. This guarantees optimal cooling with a significant increase in performance. Complete ready-to-install kit, simply replace with stock intercooler - plug and play. Tested up to 6 bar and pressure stable. All our products are subject to constant qualitative monitoring. Suitable for racing. The connection diameter is 65mm on both sides. The Competition intercooler kit fits in the following vehicles: Ford Focus MK3 ST250 2.0L 184KW/250HP (2012+). Scope of delivery:1 intercooler1 mounting material1 assembly instruction
Intercooler Ford Mondeo MK4 2,5T 162KW/220PK (2007-2010) Wagner Competition kit
The Competition high-performance intercooler has the following net dimensions (640mm x 200mm x 110mm = 14,080cm³) and thus offers a 24% larger inflow area and 60% more charge air volume compared to the original intercooler. The Competition high-performance mesh offers very good cooling properties. The weight of the intercooler is 10.5kg. CAD designed freeform cast aluminum end boxes for best possible internal airflow. Overall, this intercooler has much less back pressure than the stock intercooler. In addition, all our intercoolers have an anti-corrosion coating with heat conduction properties. This guarantees optimal cooling with a significant increase in performance. Complete ready-to-install kit, simply replace with stock intercooler - plug and play. Tested up to 6 bar and pressure stable. All our products are subject to constant qualitative monitoring. Suitable for racing. The connection diameter is 65mm on both sides. The Competition intercooler kit fits in the following vehicles: Ford Mondeo MK4 2,5T 162KW/220HP (2007-2010). Scope of delivery:1 intercooler1 mounting material1 assembly instruction
Intercooler Ford Mustang 2.3L Generation 6 Competition Wagner intercooler Evo 2
Intercooler Upgrade Kit EVO 2 for Ford Mustang 2.3l EcoBoost 2015+ (including facelift). The high performance intercooler has the following net dimensions (535mm x392mm x95mm = 19.9L). This results in a 175% larger flow area, as well as 226% more charge air volume compared to the original intercooler. The new Competition high performance mesh still allows enough airflow to the adjacent components, such as the water cooler. The total weight of the intercooler is, despite its size, only 14.2kg. The cast aluminum end boxes were created in CAD and optimized for the best possible internal airflow using CFD simulations. An air guide integrated into the end box allows for homogeneous filling of the Competition high performance mesh. The inlets and outlets of the intercooler were enlarged to Ø 70mm. In addition, this kit includes a matching carbon air guide to ensure optimum flow to the intercooler. The high performance intercooler has a pressure resistance of up to 6bar (tested). Thus, this kit is also suitable for racing. In addition, all our intercoolers are coated with an anti-corrosion coating with excellent heat conduction properties. This guarantees a durable and optimal cooling with a significant increase in performance. An easy installation and top quality that will convince you. You will receive here a complete ready-to-install kit, simply replace against the series intercooler. All our products are subject to constant qualitative monitoring. Suitable for racing. Dimensions original intercooler:525mm x 145mm x 80mmV= 6,1 LiterA= 76100mm² Scope of delivery:1 intercooler black1 carbon air duct1 mounting material1 installation instruction
Intercooler Ford Mustang 2.3L Generation 6 Wagner Competition intercooler Evo 2 + slangen kit
Intercooler Upgrade Kit EVO 2 for Ford Mustang 2.3l EcoBoost 2015+ (including facelift). The high performance intercooler has the following net dimensions (535mm x392mm x95mm = 19.9L). This results in a 175% larger flow area, as well as 226% more charge air volume compared to the original intercooler. The new Competition high performance mesh still allows enough airflow to the adjacent components, such as the water cooler. The total weight of the intercooler is, despite its size, only 14.2kg. The cast aluminum end boxes were created in CAD and optimized for the best possible internal airflow using CFD simulations. An air guide integrated into the end box allows for homogeneous filling of the Competition high performance mesh. The inlets and outlets of the intercooler were enlarged to Ø 70mm. In addition, this kit includes a matching carbon air guide to ensure optimum flow to the intercooler. The high performance intercooler has a pressure resistance of up to 6bar (tested). Thus, this kit is also suitable for racing. In addition, all our intercoolers are coated with an anti-corrosion coating with excellent heat conduction properties. This guarantees a durable and optimal cooling with a significant increase in performance. An easy installation and top quality that will convince you. You will receive here a complete ready-to-install kit, simply replace against the series intercooler. All our products are subject to constant qualitative monitoring. Suitable for racing. Dimensions original intercooler:525mm x 145mm x 80mmV= 6,1 LiterA= 76100mm² Scope of delivery:1 intercooler black1 carbon air duct1 mounting material1 installation instruction
Intercooler Ford Ranger 3,2TDCi 2015-2019 Wagner Competition kit
COMPETITION CHARGE AIR COOLER KIT for Ford Ranger : Ford Ranger PX2 3.2TDCi (147kw/200HP) 2015+. The WAGNERTUNING high performance charge air cooler features a new type of Competition mesh (Tube Fin) with dimensions of 660 mm x 282 [254] mm x 120 [65] mm [stepped]. This corresponds to an external net volume of 21.3 liters. Thus, the WagnerTuning Competition intercooler for the Ford Ranger offers a 32% larger frontal inflow area and 279% more external net volume compared to the original intercooler. The cast aluminum end boxes were designed in CAD and optimized using CFD simulations (for ideal internal airflow). With the help of an air guide incorporated inside the cooler inlet, a uniform filling of the intercooler network is ensured. The result is outstanding cooling properties with minimal backpressure. In addition, the newly developed Competition high-performance network still provides sufficient air flow to the adjacent components, such as the water cooler, and is also very light. An optimal cooling of the charged air with a significant increase in performance! An anti-corrosion coating with excellent heat conduction properties protects the WAGNERTUNING intercooler from any environmental influences, as a result of which a lasting and optimal cooling effect can be guaranteed. The assembly takes place at the original mounting points and is easy to perform (plug and play). All our products are subject to constant qualitative monitoring. Inlet diameter Ø60 mm ; outlet diameter Ø60 mm OEM intercooler:670 mm x 210 mm x 40 mmV = 5,62 LA = 1407 cm² WAGNERTUNING intercooler:660 mm x 282 [254] mm x 120 [65] mm [staggered]V = 21,3LA = 1861 cm² Scope of delivery:1 intercooler2 silicone hoses1 mounting material1 installation instruction
Intercooler Ford Ranger PX2 2,2TDCi (96-125KW/130-170PK) 2019+ Wagner Competition kit
COMPETITION CHARGE AIR COOLER KIT for Ford Ranger : The WAGNERTUNING high-performance charge air cooler has a new type of Competition mesh (Tube Fin) with dimensions of 660 mm x 282 [254] mm x 120 [65] mm [stepped]. This corresponds to an external net volume of 21.3 liters. Thus, the WagnerTuning Competition intercooler for the Ford Ranger offers a 32% larger frontal inflow area and 279% more external net volume compared to the original intercooler. The cast aluminum end boxes were designed in CAD and optimized using CFD simulations (for ideal internal airflow). With the help of an air guide incorporated inside the cooler inlet, a uniform filling of the intercooler network is ensured. The result is outstanding cooling properties with minimal backpressure. In addition, the newly developed Competition high-performance network still provides sufficient air flow to the adjacent components, such as the water cooler, and is also very light. An optimal cooling of the charged air with a significant increase in performance! An anti-corrosion coating with excellent heat conduction properties protects the WAGNERTUNING intercooler from any environmental influences, as a result of which a lasting and optimal cooling effect can be guaranteed. The assembly takes place at the original mounting points and is easy to perform (plug and play). All our products are subject to constant qualitative monitoring. Inlet diameter Ø60 mm ; outlet diameter Ø60 mm OEM intercooler:670 mm x 210 mm x 40 mmV = 5,62 LA = 1407 cm² WAGNERTUNING intercooler:660 mm x 282 [254] mm x 120 [65] mm [staggered]V = 21,3LA = 1861 cm² Scope of delivery:1 intercooler2 silicone hoses1 mounting material1 installation instruction
Intercooler Honda Civic FK2 Type R 2015- Wagner Competition kit
Competition Intercooler Kit Honda Civic Type R FK2 The high performance intercooler has the following net dimensions (650mm x 175mm x 110mm) and thus offers a 23% larger flow area as well as 101% more charge air volume compared to the original intercooler. The newly developed Competition high-performance mesh grants sufficient airflow to the adjacent components, such as the water cooler, and is also very lightweight. The end boxes of the charge air cooler are made of cast aluminum and were optimized under flow analyses in the CAD system. With the help of incorporated air baffles, in the entrance, a uniform filling of the intercooler is ensured. The result is excellent cooling properties with minimal back pressure. Thus, this kit is exactly the right thing for racing. The assembly is done at the original mounting points and is easy to perform(1:1 exchange). An optimal cooling of the charged air with a significant increase in performance! All our products are subject to constant qualitative monitoring. Inlet 65mm Outlet 70mm OEM intercooler:Cooling surface 924cm²Charge air volume 6,2L WAGNERTUNING intercooler:Cooling surface 1137,5cm²Charge air volume 12,5LWeight 10kg Scope of delivery:1 intercooler2 silicone hose4 hose clamps
Intercooler Honda Civic FK7 1.5VTec Turbo 2017- Wagner Competition kit
Competition Intercooler Kit for Honda Civic FK7 1,5VTec Turbo Honda Civic FK7 1.5VTec Turbo 132KW/182HP (2017+). The Competition high-performance intercooler has the following mesh dimensions (715mm x 162mm x 122mm / stepped = 12,700cc), providing a 42% larger flow area, as well as 144% more intercooler volume compared to the original intercooler. The Competition high performance mesh is a high quality Tube Fin mesh with internal turbulators. Despite its size, the total weight of the intercooler is only 7.5kg. The end boxes of the intercooler are made of cast aluminum and have been optimized using flow analysis in the CFD system. The intercooler kit was developed directly for the large tuning stages and is therefore optionally offered with Ø60mm piping. The result is excellent cooling properties at lowest backpressure. In addition, all our intercoolers have an anti-corrosion coating with heat conduction properties. This guarantees long-lasting and optimum cooling with a significant increase in performance. Complete ready-to-install kit, simply replace with stock intercooler - plug and play. Tested and pressure stable up to 6 bar. All our products are subject to constant qualitative monitoring. Suitable for racing. Dimensions original intercooler:710mm x 114mm x 64mmV=5,2 litersA=809 cm² Dimensions WAGNERTUNING intercooler:715mm x 162mm x 122mmV=12,7 LiterA=1154 cm² Scope of delivery:1 intercooler (black coated)2 adapter plates for OEM connection2 gasket rings1 assembly instruction
Intercooler Honda Civic FK7 1.5VTec Turbo 2017- Wagner Competition kit + slangen kit
Competition Intercooler Kit for Honda Civic FK7 1,5VTec Turbo Honda Civic FK7 1.5VTec Turbo 132KW/182HP (2017+). The Competition high-performance intercooler has the following mesh dimensions (715mm x 162mm x 122mm / stepped = 12,700cc), providing a 42% larger flow area, as well as 144% more intercooler volume compared to the original intercooler. The Competition high performance mesh is a high quality Tube Fin mesh with internal turbulators. Despite its size, the total weight of the intercooler is only 7.5kg. The end boxes of the intercooler are made of cast aluminum and have been optimized using flow analysis in the CFD system. The intercooler kit was developed directly for the large tuning stages and is therefore optionally offered with Ø60mm piping. The result is excellent cooling properties at lowest backpressure. In addition, all our intercoolers have an anti-corrosion coating with heat conduction properties. This guarantees long-lasting and optimum cooling with a significant increase in performance. Complete ready-to-install kit, simply replace with stock intercooler - plug and play. Tested and pressure stable up to 6 bar. All our products are subject to constant qualitative monitoring. Suitable for racing. Dimensions original intercooler:710mm x 114mm x 64mmV=5,2 litersA=809 cm² Dimensions WAGNERTUNING intercooler:715mm x 162mm x 122mmV=12,7 LiterA=1154 cm² Scope of delivery:1 intercooler (black coated)2 adapter plates for OEM connection2 gasket rings1 assembly instruction
Intercooler Honda Civic FK8 Type R Wagner Competition kit
COMPETITION INTERCOOLER KIT HONDA CIVIC TYPE R FK8 The WAGNERTUNING high performance intercooler has a new competition net (Tube Fin) with the dimensions 670 mm x 183,4 mm x 125 mm (15.4 liters), which was developed especially for the demands of the Honda Civic Type R FK8. This high performance mesh offers a 91% larger flow area, as well as 140% more mesh volume compared to the original intercooler. The cast aluminum end boxes were designed in CAD and optimized using CFD simulations (for ideal internal airflow). With the help of an integrated air baffle inside the cooler inlet, a uniform filling of the intercooler is ensured. The result is outstanding cooling properties with minimal backpressure. In addition, the newly developed Competition high-performance mesh still provides sufficient airflow to the adjacent components, such as the water cooler, thanks to the use of a specially manufactured air baffle, and is also very lightweight. Thus, this kit is just right for racing. An optimal cooling of the charged air with a significant increase in performance! An anti-corrosion coating with excellent heat conduction properties protects the WAGNERTUNING intercooler from any environmental influences, as a result of which a lasting and optimal cooling effect can be guaranteed. The assembly takes place at the original mounting points and is easy to perform (plug and play). All our products are subject to constant qualitative monitoring. Inlet diameter Ø65 mm ; outlet diameter Ø70 mm OEM intercooler:V = 6,4 LA = 640 cm² WAGNERTUNING intercooler:V = 15,4 LA = 1226 cm² Scope of delivery:1 intercooler1 air baffle2 silicone hose1 mounting material1 installation instruction
Intercooler Hyundai Elantra Sport 1.6TGDi Wagner Competition kit
Hyundai Elantra Sport, GT-Line, GTS 1.6TGDI 150KW/204HP 2017+Hyundai Veloster Turbo 1,6TGDI 150KW/204HP 2018+ The WAGNERTUNING high performance intercooler has a new Competition - net (Tube Fin) with the dimensions of580 mm x 120 mm x 150 mm + 580 mm x 62 mm x 70 mm (stepped net: 12.96 liters), which was developed specifically for the demands of the Kia (Pro)Ceed GT. This high performance mesh thus offers a 60% larger flow area, as well as 118% more mesh volume compared to the original intercooler. The cast aluminum end boxes were designed in CAD and optimized using CFD simulations (for ideal internal airflow). The result is excellent cooling properties at lowest backpressure. In addition, the newly developed Competition high-performance mesh still provides sufficient airflow to the adjacent components, such as the water cooler, through the use of a specially manufactured air baffle. Thus, this kit is just right for racing. An optimal cooling of the charged air with a significant increase in performance! An anti-corrosion coating with excellent heat conduction properties protects the WAGNERTUNING intercooler from any environmental influences, as a result of which a lasting and optimal cooling effect can be guaranteed. The assembly takes place at the original mounting points and is easy to perform (plug and play). All our products are subject to constant qualitative monitoring. Inlet and outlet diameter: Ø65mm OEM intercooler:V = 5,94 LA = 660 cm² WAGNERTUNING intercooler:V = 12,96 L (+118%)A = 1055 cm² (+60%) Scope of delivery:1 intercooler2 silicone hoses1 air baffle1 mounting material1 installation instruction
Intercooler Hyundai I20N150kw 2021- Wagner Competition kit
Hyundai I20 N 150KW/204HP (2021-) Volume approx. 12.9L Packaging:Intercooler 580 mm x 181 mm x 70 mm + 580 mm x 120 mm x 80 mAssembly manualMounting material: 2 silicone hoses + 4 hose clampsAssembly manual
Intercooler Hyundai I30 N 2.0 T-GDI Wagner Competition kit Gen.2
Hyundai I30 N 184KW/250HP (2017-2019)Hyundai I30 N Performance 202KW/275HP (2017-2019)Hyundai I30 N Project C 202KW/275HP (2019) OEM intercooler:V = 7.1 LA = 79360 mm² WAGNERTUNING intercooler:V = 14.3 LA = 114492 mm²G = 9.3kg Packaging:Intercooler 580x150x135Assembly manualMounting material: 2 silicone hoses + 4 hose clampsAssembly manual
Intercooler Hyundai I301.6 T-GDi Competition kit
Competition Intercooler Kit Hyundai I30 1,6 T-GDI and Kia Cee'd GT 1,6T-GDI The high performance intercooler has the following mesh dimensions (300mm x 350mm x 125[65]mm), providing 100% larger flow area and 117% more charge air volume compared to the original intercooler. The newly developed Competition high-performance mesh is very light, so the complete intercooler weighs only 7.1kg. The end boxes of the intercooler are made of cast aluminum and were optimized under flow analyses in the CAD system. With the help of incorporated air baffles, in the inlet, a uniform filling of the intercooler is ensured. The connection diameters at the inlet and outlet expanded to 60/50mm. Therefore, the kit includes two reinforced silicone hoses. The result is excellent cooling properties with the lowest back pressure. Thus, this kit is just right for racing. The assembly is done at the original mounting points and is easy to perform(1:1 exchange). An optimal cooling of the charged air with a significant increase in performance! All our products are subject to constant qualitative monitoring. OEM intercooler: cooling surface 522cm² / charge air volume 4,7LWAGNERTUNING intercooler: cooling surface 1050cm² / charge air volume 10,2L Scope of delivery:1 intercooler2 silicone hoses4 hose clamps1 assembly instruction
Intercooler Hyundai Veloster 1.6TGDi Wagner Competition kit
Hyundai Elantra Sport, GT-Line, GTS 1.6TGDI 150KW/204HP 2017+Hyundai Veloster Turbo 1,6TGDI 150KW/204HP 2018+ The WAGNERTUNING high performance intercooler has a new Competition - net (Tube Fin) with the dimensions of580 mm x 120 mm x 150 mm + 580 mm x 62 mm x 70 mm (stepped net: 12.96 liters), which was developed specifically for the demands of the Kia (Pro)Ceed GT. This high performance mesh thus offers a 60% larger flow area, as well as 118% more mesh volume compared to the original intercooler. The cast aluminum end boxes were designed in CAD and optimized using CFD simulations (for ideal internal airflow). The result is excellent cooling properties at lowest backpressure. In addition, the newly developed Competition high-performance mesh still provides sufficient airflow to the adjacent components, such as the water cooler, through the use of a specially manufactured air baffle. Thus, this kit is just right for racing. An optimal cooling of the charged air with a significant increase in performance! An anti-corrosion coating with excellent heat conduction properties protects the WAGNERTUNING intercooler from any environmental influences, as a result of which a lasting and optimal cooling effect can be guaranteed. The assembly takes place at the original mounting points and is easy to perform (plug and play). All our products are subject to constant qualitative monitoring. Inlet and outlet diameter: Ø65mm OEM intercooler:V = 5,94 LA = 660 cm² WAGNERTUNING intercooler:V = 12,96 L (+118%)A = 1055 cm² (+60%) Scope of delivery:1 intercooler2 silicone hoses1 air baffle1 mounting material1 installation instruction