WAGNER Intercoolers zijn leverbaar als Performance en Competition. Het verschil zit in het type gebruikte gaas. Bij de Performance is dat "Bar & Plate" en bij de Competition "Tube Fin".
Daarnaast zijn er nog 3 verschillende volumes: EVO1, EVO2 en EVO3.
EVO1 is ontwikkeld om gebruikt te worden in combinatie met de originele turbolader met als resultaat een zeer efficiënte koeling van de inlaatlucht. EVO2 en EVO3 hebben een grotere volume en gaan prima samen met de toename van inlaatlucht na een turbolader upgrade. Afhankelijk van het systeem worden ook de in- en uitlaat diameters vergroot.
Deze intercoolers worden met de benodigde siliconen slangen geleverd.
BMW M4 F82/83 317-368KW S55 mot. 2014-2018 zonder roetfilter (Zie beschrijving omvang Comp kit.)
BMW M3 F80 S55 engine 317-331KW/431-450HP (2014-2018)BMW M4 F82 S55 engine 317-368KW/431-500HP (2014-2018)BMW M4 F83 S55 engine 317-331KW/431-450HP (2014-2018) The intercooler upgrade kit: The WAGNERTUNING high performance intercooler features a new Competition mesh (Tube Fin) with dimensions of 287 mm x 185 mm x 115 mm. This was developed specifically for the high demands of the BMW M3/M4 and offers 114% more external net volume compared to the original intercooler. The ratio between internal and external cooling surface used here generates maximum heat transfer and at the same time allows the best possible internal airflow. The cast aluminum end boxes were designed in CAD and optimized with the help of CFD simulations. The result is excellent cooling properties at lowest backpressure. Thus, this kit is also suitable for racing. An optimal cooling of the charged air with a significant increase in performance! All WAGNERTUNING intercoolers are equipped with a heat-conducting anti-corrosion coating, so that a lasting cooling effect is ensured. The installation of the system is also uncomplicated and plug & play with the help of our installation instructions. Advantages of this product:- significantly better cooling performance- less back pressure- more power and torque for your engine- mechanical relief of the turbocharger- 100% pressure resistance- 100% plug and play- up to 4 years warranty Not approved in the area of the STVO. The water cooler upgrade kit: The 3.0 liter S55B30 turbo engine of the BMW M3/M4 models is equipped with an indirect charge air cooling circuit. Accordingly, the cooling process of the charge air is not carried out (as usual) with the ambient air as a cooling medium, but is realized with the help of a separate cooling water circuit. A reduction in the cooling water temperature can therefore be directly equated with improved charge air cooling performance. This is exactly where the advantages of the WAGNERTUNING Upgrade water coolers come into play. The newly developed Competition - racing meshes of the WAGNERTUNING high-performance water coolers increase the radiator volume of the standard water coolers by 89% for the frontal and by 94% for the lateral. The ratio between inner and outer cooling surface generates a maximum heat transfer and at the same time allows the adjacent components (e.g. the engine water cooler behind it) sufficient air flow for its heat exchange. Furthermore, with the help of the increased amount of cooling water, the entire system thermics can be kept at a lower level over a longer period of time. All WAGNERTUNING water coolers are equipped with a heat-conducting anti-corrosion coating, so that a lasting cooling effect is ensured. The installation of the system is also uncomplicated and plug & play with the help of our installation instructions. Scope of delivery:1x frontal water cooler (low-temperature circuit)1x lateral water cooler (low temperature circuit)1x carbon air duct for the lateral water cooler1x mounting material1x installation instruction The Downpipe Kit: Downpipe kit with 200CPSI racing catalytic converter for BMW M3/M4 F80/82/83 without OPF! high quality stainless steel casting 1.4301 (SS304)complete Ø3Inch (76mm) with adapter to original AGACAD designed and flow optimized2 lambda probe connectionsRacing metal catalytic converter (200 CPSI with high quality EURO 6 coating)100% accurate fit, easy to replace with stock partless thermal load for the turbochargermore power due to dynamic pressure reductionmuch more torque Not approved in the area of the STVO.Error display in the DME possible.
BMW M4 F82/83 317-368KW S55 mot. 2014-2018 zonder roetfilter (Zie beschrijving omvang Comp kit.)
BMW M3 F80 S55 engine 317-331KW/431-450HP (2014-2018)BMW M4 F82 S55 engine 317-368KW/431-500HP (2014-2018)BMW M4 F83 S55 engine 317-331KW/431-450HP (2014-2018) The intercooler upgrade kit: The WAGNERTUNING high performance intercooler features a new Competition mesh (Tube Fin) with dimensions of 287 mm x 185 mm x 115 mm. This was developed specifically for the high demands of the BMW M3/M4 and offers 114% more external net volume compared to the original intercooler. The ratio between internal and external cooling surface used here generates maximum heat transfer and at the same time allows the best possible internal airflow. The cast aluminum end boxes were designed in CAD and optimized with the help of CFD simulations. The result is excellent cooling properties at lowest backpressure. Thus, this kit is also suitable for racing. An optimal cooling of the charged air with a significant increase in performance! All WAGNERTUNING intercoolers are equipped with a heat-conducting anti-corrosion coating, so that a lasting cooling effect is ensured. The installation of the system is also uncomplicated and plug & play with the help of our installation instructions. Advantages of this product:- significantly better cooling performance- less back pressure- more power and torque for your engine- mechanical relief of the turbocharger- 100% pressure resistance- 100% plug and play- up to 4 years warranty Not approved in the area of the STVO. The water cooler upgrade kit: The 3.0 liter S55B30 turbo engine of the BMW M3/M4 models is equipped with an indirect charge air cooling circuit. Accordingly, the cooling process of the charge air is not carried out (as usual) with the ambient air as a cooling medium, but is realized with the help of a separate cooling water circuit. A reduction in the cooling water temperature can therefore be directly equated with improved charge air cooling performance. This is exactly where the advantages of the WAGNERTUNING Upgrade water coolers come into play. The newly developed Competition - racing meshes of the WAGNERTUNING high-performance water coolers increase the radiator volume of the standard water coolers by 89% for the frontal and by 94% for the lateral. The ratio between inner and outer cooling surface generates a maximum heat transfer and at the same time allows the adjacent components (e.g. the engine water cooler behind it) sufficient air flow for its heat exchange. Furthermore, with the help of the increased amount of cooling water, the entire system thermics can be kept at a lower level over a longer period of time. All WAGNERTUNING water coolers are equipped with a heat-conducting anti-corrosion coating, so that a lasting cooling effect is ensured. The installation of the system is also uncomplicated and plug & play with the help of our installation instructions. Scope of delivery:1x frontal water cooler (low-temperature circuit)1x lateral water cooler (low temperature circuit)1x carbon air duct for the lateral water cooler1x mounting material1x installation instruction The Charge Pipe Kit:Ø57mm Charge Pipe Kit for BMW F87 M2 Competition / F80 M3 / F82 F83 M4 with S55 engine Important product features:- Compared to the OEM Charge Pipes, the WAGNER system has a larger flow diameter and no, as found in the OEM product, countless internal cross-section changes.- this results in a 40% lower back pressure, which relieves the turbocharger and at the same time provides a better response (see Flow Bench graphic below)- our WAGNER Charge Pipes are completely made of aluminum and, in contrast to the OEM product, do not burst under load (high pressure and/or age-related)- the special structure powder coating serves not only the corrosion protection, but also the OEM optics Scope of delivery:2 aluminum charge air pipe (black coated)2 silicone adapters (black)4 stainless steel hose clamps1 Mounting material
BMW N54 mot.335(x)i E90/91/92/93, 335is E92 Competition Pakket: Intercooler EVO 3 + Downpipe
BMW 335 (x)i E90/E91/E92/93 2006-2011BMW 335is E92 2009-2013BMW 135i E82/E88 2008-2013BMW 1 series M E82 2011-2013 Intercooler Upgrade Kit: The high performance intercooler features mesh dimensions of 510mm x 303mm x 180mm (stepped 20.65L), providing a 162% larger flow area, as well as 182% more intercooler volume compared to the original intercooler. The Competition high performance mesh is a high quality Tube Fin mesh with internal turbulators. Despite its size, the total weight of the intercooler is only 13.2kg. The end boxes of the intercooler are made of cast aluminum and have been optimized using flow analysis in the CFD system. The intercooler kit EVO3 was developed directly for the high demands of the large tuning stages on the BMW 135i and 335i. The original click connections were eliminated and the connection diameters at the inlet and outlet were expanded to Ø70mm. Therefore, the kit includes two reinforced silicone hoses. The result is excellent cooling properties with the lowest back pressure. In addition, all our intercoolers have an anti-corrosion coating with heat conduction properties. This guarantees long-lasting and optimum cooling with a significant increase in performance. Complete ready-to-install kit, simply replace with stock intercooler - due to the extreme size, minor adjustments to the radiator support are necessary. Tested up to 6 bar and pressure stable. All our products are subject to constant qualitative monitoring. Suitable for racing. Scope of delivery:1 intercooler2 silicone hoses1 aluminum adapter1 mounting material1 assembly instruction The Wagner-Tuning Y-pipe kit BMW E8x E9x N54 engine: Diameter of 70mmcompletely high quality stainless steel 1.4301 (SS304)without pre-cat2 lambda probe connections per sidewith flexible compensation100% accurate fit, easy to replace with stock partless thermal load for the turbochargermore power due to dynamic pressure reductionmuch more torquefits all BMW Biturbo N54 engines (except Z4)
BMW N55 mot. 335i(x) F30/31/34 -6/2013 Performance Pakket: Intercooler EVO 1 + Downpipe incl. kat
BMW M135i F20 / F21 until Bj.: 06/2013BMW 335i(x) F30 / F31 / F34 until Bj.: 06/2013BMW 435i(x) F32 / F33 until Bj.: 06/2013
BMW N55 mot. M235i(x) F22/23, M2 F87 7/2013+ Competition Pakket: Intercooler EVO 2 + Downpipe
The Competition package for the BMW F-series consists of the intercooler upgrade kit, the N55 Y-pipe kit without catalytic converter and fits the following vehicles. BMW M135i(x) F20 / F21 from year of construction: 07/2013BMW M235i(x) F22 / F23BMW M2 F87BMW M2 F87 272KW/370PS (2016+)BMW 335i(x) F30 / F31 / F34 from year of construction: 07/2013BMW 435i(x) F32 / F36 from year of manufacture: 07/2013 Intercooler Upgrade Kit: The high performance intercooler has the following mesh dimensions (520x215x145/staged 13,840cc / OEM 510x130x110mm, 7,293cc), providing 85% more flow area and 90% more intercooler volume compared to the original intercooler. The Competition high-performance mesh offers very good cooling properties and is also very lightweight. The end boxes of the intercooler are made of cast aluminum and were optimized using flow analyses in the CAD system. The intercooler kit EVO 2 was developed directly for the BMW 335i. The installation is done by replacing the OEM intercooler and is easy to perform. The original charge air hoses can still be used. An optimal cooling of the charged air with a significant increase in performance! The Competition version has a weight of 8.6kg.All our products are subject to constant qualitative monitoring. Scope of delivery:1 intercooler1 mounting material1 assembly instruction Y-pipe kit N55 without catalytic converter: replaces original BMW part number: 18328602882diameter of 76mm (3)complete high quality stainless steel 1.4301 (SS304)CAD-Designed2 lambda probe connectionswithout main catalyst100% accurate fit, easy to replace with stock partless thermal load for the turbochargermore power due to back pressure reductionconnection diameter 118mmmuch more torque
Ford Focus MK3 ST250 Wagner Competition Pakket: Intercooler + Downpipe incl. kat.
Ford Focus MK3 ST250 2,0L 184KW/250HP (2012+)
Intercooler Subaru Impreza WRX STi 2014- Wagner Competition Kit
Subaru WRX Sti 2,5 Turbo 221KW/300HP (2014-)* Not suitable for vehicles with strut brace. The Competition high-performance intercooler has the following net dimensions (530mm x 205mm x 95mm= 10,300cm³) and thus offers a 20% larger inflow area and 86% more charge air volume compared to the original intercooler. A new type of Competition high-performance mesh (Tube Fin) is used here, which was developed directly for the demands of the Subaru WRX STi. The cast aluminum end boxes were created in CAD and optimized for the best possible internal airflow using CFD simulations. The intercooler inlets and outlets were not modified. The intercooler back pressure is identical to the stock intercooler. An anti-corrosion coating with heat conduction properties protects our intercoolers from environmental influences. This guarantees permanent and optimal cooling with a significant increase in performance. Installation is done by replacing the OEM intercooler and is easy to perform (plug and play). All our products are subject to constant qualitative monitoring. Dimensions original intercooler:530mm x 170mm x 61,5mmV=5,54 litersA=901 cm² Dimensions WAGNERTUNING intercooler:530mm x 205mm x 95mmV=10,30 LiterA=1086 cm² Scope of delivery:1 intercooler (black coated)1 air duct1 silicone hose (black)1 mounting material1 assembly instruction Not approved in the area of the STVO.
Intercooler A5 F5 2016- 2.0 TFSI, 35TFSI, 40TFSI, 45TFSI Wagner Competition kit
Competition intercooler kit for Audi A4 B9/A5 F5 suitable for the following vehicles: Audi A4 B9 2,0TFSI ultra 140KW/190hp (2015-2018)Audi A4 B9 2,0TFSI 185KW/252hp (2015-2018)Audi A4 B9 35TFSI 110KW/150hp (2018+)Audi A4 B9 40TFSI 140KW/190hp (2018+)Audi A4 B9 45TFSI 180KW/245hp (2019+)Audi A5 F5 2.0TFSI ultra 140KW/190hp (2016-2018)Audi A5 F5 2.0TFSI 185KW/252hp (2016-2018)Audi A5 F5 35TFSI 110KW/150hp (2018+)Audi A5 F5 40TFSI 140KW/190hp (2018+)Audi A5 F5 45TFSI 180KW/245hp (2019+). The Competition high-performance intercooler has the following mesh dimensions (550mm x 445mm x 70mm = 17,130cc), providing a 134% larger flow area, as well as 105% more charge air volume compared to the original intercooler. The Competition high performance mesh is a high quality Tube Fin mesh with internal turbulators. Despite its size, the total weight of the intercooler is only 9.5kg. The end boxes of the intercooler are made of cast aluminum and have been optimized using flow analysis in the CFD system.The connection diameters are Ø62mm at the intercooler inlet and Ø67mm at the intercooler outlet.The result is excellent cooling properties at lowest backpressure. In addition, all our intercoolers have an anti-corrosion coating with heat conduction properties. This guarantees long-lasting and optimum cooling with a significant increase in performance. Complete ready-to-install kit, simply replace with stock intercooler - plug and play. Tested and pressure stable up to 6 bar. All our products are subject to constant qualitative monitoring. Suitable for racing. Dimensions original intercooler:720mm x 145mm x 80mmV=8,35 LiterA=1044 cm² Dimensions WAGNERTUNING intercooler:550mm x 445mm x 70mmV=17,13 LiterA=2447 cm² Scope of delivery:1 intercooler (black coated)1 silicone hose (black)1 mounting material1 assembly instruction
Intercooler Audi A1 8X 2010- 1.4 TSI, 2.0 TFSI, 1.6 TDi, 2.0TDi Wagner Competition Kit
The Competition high-performance intercooler has the following net dimensions (590mm x 170mm x 100mm = 10,030cm³) and thus offers a 70% larger inflow area and 112% more charge air volume compared to the original intercooler. The Competition high-performance network offers very good cooling properties. The weight of the intercooler is 6.6kg. CAD designed free-form cast aluminum end boxes for the best possible internal airflow. Overall, this intercooler has less back pressure than the series cooler. In addition, all of our intercoolers have an anti-corrosion coating with thermal conductivity properties. This guarantees optimal cooling with a significant increase in performance. Complete, ready-to-install kit, simply replace with the standard intercooler - plug and play. Tested up to 6 bar and stable under pressure. All of our products are subject to constant quality monitoring. Suitable for racing. The connection diameter is 55mm on both sides. The competition intercooler kit for VAG 1.4 TSI fits in the following vehicles: Audi A1 1.4 TSI 136KW/185PS (2010+) Audi A1 Quattro 2.0TFSI 188KW/256PS (2012) Limited Edition Audi A1 1.6TDI 66-77KW/90-105HP (2011-2014) Audi A1 2.0TDI 105KW/143PS (2011-2014) Skoda Fabia RS 1.4 TSI 132KW/180PS (2010+) Skoda Fabia 1.6TDI 66-77KW/90-105HP (2010-2014) VW Polo 6R GTI 1.4 TSI 132KW/180PS (2010-2014) VW Polo 6R WRC 2.0 TSI 162KW/220PS (2013-2014) VW Polo 6C GTI 1.8 TSI 141KW/192PS (2015+) With slight adjustment work also suitable for the following models Seat Ibiza / Cupra 1.4 TSI /1.8TSI (explanation is on the last page of the installation instructions) Seat Ibiza 1.6/2.0TDI 66-105KW/90-143PS (2009-2015) (explanation is on the last page of the installation instructions) Scope of delivery: 1 intercooler1 assembly instructions
![Intercooler Audi A1 GB 2018- [GB] 40TFSI 147kw Wagner Competition kit](https://carfantasy.nl/media/fb/a1/a4/1719305625/200001152r4qutlhbf4h7v.jpg?ts=1727536612 "200001152r4QuTlhbf4h7v")
![Intercooler Audi A1 GB 2018- [GB] 40TFSI 147kw Wagner Competition kit](https://carfantasy.nl/media/00/24/eb/1719256729/200001152_193nrla1fw1h67.jpg?ts=1727536612 "200001152_193NRLa1FW1H67")
Intercooler Audi A1 GB 2018- [GB] 40TFSI 147kw Wagner Competition kit
COMPETITION CHARGE AIR COOLER KIT for VW Polo AW GTI 2,0TSI (147KW/200PS) from 2018. The WAGNERTUNING high-performance charge air cooler features a new type of Competition mesh (Tube Fin) with dimensions of 600 mm x 167 [101] mm x 125 [90] mm [stepped]. This corresponds to an external net volume of 11.14 liters. Thus, the WagnerTuning Competition intercooler for the Polo GTI offers a 24% larger frontal inflow area and 73% more external net volume compared to the original intercooler. The cast aluminum end boxes were designed in CAD and optimized using CFD simulations (for ideal internal airflow). The result is excellent cooling characteristics with the lowest back pressure. Thus, this kit is just right for racing. An optimal cooling of the charged air with a significant increase in performance! An anti-corrosion coating with excellent heat conduction properties protects the WAGNERTUNING intercooler from any environmental influences, as a result of which a lasting and optimal cooling effect can be guaranteed. The assembly takes place at the original mounting points and is easy to perform (plug and play). All our products are subject to constant qualitative monitoring. Inlet diameter Ø60 mm ; outlet diameter Ø60 mm OEM intercooler:700 mm x 115 mm x 80 mmV = 6,44 LA = 805 cm² WAGNERTUNING intercooler:600 mm x 167 [101] mm x 125 [90] mm [stepped]V = 11,14 LA = 1002 cm² Scope of delivery:1 intercooler2 silicone hose1 mounting material1 installation instruction
Intercooler Audi A3 8P 2003- 1.6 TDI, 2.0TDI Wagner Competition kit Gen.2
Audi A3 1.6 TDI 77KW/105PS (2009-2013)Audi A3 2.0 TDI 103-125KW/140-170PS (2008-2013) This WAGNERTUNING Competition Intercooler Kit for the VAG 1.6 / 2.0 TDI Engine with Common-Rail Injection fits the following cars.Engine code: CBAA,CBAB, CBAC, CBDB, CBDC, CBBB, CAYC, CLCA,CLCB, CFHC,CFHF, CEGA, CFFB,CFGB, CLJA, CAYB, CFJA, CFJB, CFHC, CJAA, CFGC ? Audi A3 1.6 TDI 77KW/105PS (2009-2013)? Audi A3 2.0 TDI 103-125KW/140-170PS (2008-2013)? Audi TT 2.0 TDI 125KW/170PS (2008-2014) ? VW Golf 6 1.6 TDI 77KW/105PS (2009-2013)? VW Golf 6 2.0 TDI 81-103KW/110-140PS (2008-2012)? VW Golf 6 GTD 125KW/170PS (2009-2012)? VW Jetta 6 1.6TDI 77KW/105PS(2010-2013)? VW Jetta 6 2.0 TDI 103KW/140PS(2010-2013) ?? VW EOS 2.0 TDI 103KW/140PS (2009-2014)? VW Passat B6 (Typ 3C) 1.6 TDI 77KW/105PS (2009-2010)? VW Passat B6 (Typ 3C) 2.0 TDI 103KW - 125KW /140PS - 170PS (2008-2010)? VW Passat B7 2.0TDI 103KW - 130KW /140PS - 177PS (2010-2014) ?? VW Passat CC 2.0 TDI 103KW - 130KW /140PS - 177PS (2008-2016) ?? VW Scirocco 3 2.0 TDI 103KW/140PS (2008-2014)? VW Scirocco 3 2.0 TDI 125KW/170PS (2009-2014)? VW Caddy 2.0 TDI 103KW/140PS (2012-2015)? VW Caddy 2.0 TDI 125KW/170PS (2012-2015)? VW Touran 1.6 TDI 66-77KW/90-105PS (2010-2015)? VW Touran 2.0 TDI 103KW/140PS (2010-2015)? VW Touran 2.0 TDI 125-130KW/170-177PS (2010-2013)? VW Beetle 1.6 TDI 77KW/105PS (2011-2014) ?? VW Beetle 2.0 TDI 81-103KW/110-140PS (2012-2014) ? Skoda Octavia 1.6 TDI 77KW/105PS (2009-2013)? Skoda Octavia 2.0 TDI 103KW/140PS (2010-2013)? Skoda Octavia RS 2.0 TDI 125KW/170PS (2008-2013)? Skoda Superb 1.6 TDI 77KW/105PS (2010-2013)? Skoda Superb 2.0 TDI 103KW/140PS (2010-2013)? Skoda Superb 2.0 TDI 125KW/170PS (2010-2013) ? Seat Leon 1.6 TDI 77KW/105PS (2010-2012)? Seat Leon 2.0 TDI 103KW/140PS (2010-2012)? Seat Leon FR 2.0 TDI 125KW/170PS (2009-2011) Volume: 17.4LWeight: 9.3kg Packaging:Intercooler 610mm x 440mm x 65mm2 silicone hoses4 hose clampsAssembly manual
Intercooler Audi A3 8P 2003- 1.8 TFSI, 2.0TFSI Wagner Competition kit Gen.2
The revised Competition Gen.2 intercooler kit for the VAG models with the 2.0T(F)SI 1st & 2nd generation engine. The Competition intercooler has the following mesh dimensions (610mm x 440mm x 65mm / 17.45L), providing a 10% larger flow area and 50% more intercooler volume compared to the original Audi S3 intercooler. The newly developed Competition high-performance mesh still grants enough airflow to the adjacent components, such as the water cooler, and is also very light (S3 OEM 8kg / WAGNERTUNING 9.2kg) . CAD developed freeform end boxes with incorporated cast aluminum air baffle for best possible internal air distribution. The CNC machined hose connections were enlarged to Ø67mm , so this kit comes with matching silicone hoses. Overall this intercooler has far from less back pressure than the stock cooler. In addition, all our intercoolers have an anti-corrosion coating with heat conduction properties. This guarantees optimal cooling with a significant increase in performance.Installation is done by replacing the OEM intercooler and is easy to perform.All our products are subject to constant qualitative monitoring.Available with TÜV parts certificate for many vehicles. The WAGNERTUNING Competition intercooler kit for the VAG 2,0TFSI / TSI engine is suitable for the following vehicles: ? Audi A3 8P 1,8 TFSI 118KW/160PS (2007-2012)? Audi A3 8P 2,0 TFSI 147KW/200PS (2004-2012)? Audi S3 8P 195KW/265PS (2006-2012)? Audi TT 8J 1.8 TSI 118KW/160PS (2008-2014)? Audi TT 8J 2,0 TFSI 147-155KW/200-211PS (2006-2014) (not MKB. CETA; CESA)? Audi TTS 8J 200KW/272PS (2008-2014) (not MKB. CETA; CESA) ? Volkswagen Golf 5 GTI (incl.ED 30) 147-169KW/200-230PS (2004-2008)? Volkswagen Golf 6 GTI (incl.ED 35) (Convertible) 155-173KW/211-235PS (2009-2013)? Volkswagen Golf 6 R (incl. convertible) 199KW/270PS (2009-2013)? Volkswagen Scirocco 3 2.0 TSI 147-162KW/200-220PS (2008-2015)? Volkswagen Scirocco 3 R 195-206KW/265-280PS (2009-2015)? Volkswagen EOS 2.0 TFSI 147KW/200PS (2006-2009)? Volkswagen EOS 2.0 TFSI 155KW/211PS (2009-2014)? Volkswagen Jetta 5 2.0 TFSI 147KW/200PS (2005-2010)? Volkswagen Jetta 6 2.0 TSI 147-155KW/200-211PS (2010-2014)? Volkswagen Passat B6 1.8 TSI 118KW/160PS (2007-2010)? Volkswagen Passat B6 2.0 TSI 147KW/200PS (2005-2010)? Volkswagen Passat B7 1.8 TSI 118KW/160PS (2010-2012)? Volkswagen Passat B7 2.0 TSI 155KW/211PS (2010-2014)? Volkswagen Passat CC 1.8 TSI 118KW/160PS (2008-2012)? Volkswagen Passat CC 2.0 TFSI 147KW/200PS (2008-2010)? Volkswagen Passat CC 2.0 TSI 155KW/211PS (2010-2014)? Volkswagen Beetle 2.0 TSI 147-162KW/200-220PS (2011-) ? Skoda Octavia 1Z 1.8 TSI 118KW/160PS (2008-2013)? Skoda Octavia 1Z MK2 RS 147KW/200PS (2005-2009)? Skoda Octavia 1Z MK2 RS 155KW/211PS (2009-2013)? Skoda Suberb 3T 2.0 TSI 147KW/200PS (2010-2013) ? Seat Leon 1P 1,8 TFSI 118KW/160PS (2009-2012)* ?? Seat Leon 1P 2,0 TFSI 136KW/185PS (2005-2006)* ?? Seat Leon 1P FR 147KW/200PS (2006-2009)* ?? Seat Leon 1P FR 155KW/211PS (2009-2012)* ?? Seat Leon 1P Cupra 177KW/241PS (2007-2011)* ?? Seat Leon 1P Cupra R 195KW/265PS (2009-2012)* ?? Seat Leon 1P Copa Edition 210KW/286PS (2008)* ?? Seat Leon 1P Cupra R310 LE 228KW/310PS (2009-2012)* ?? Seat Leon 1P Cupra R310 WCE 228KW/310PS (2009-2012)* ? * slight modifications to the vehicle necessary Scope of delivery:1 intercooler2 silicone hoses4 hose clamps1 aluminum adapter1 assembly instruction
Intercooler Audi A3 8V 2012- 1.8TSI, 2.0TSI Wagner Competition kit
The Competition intercooler has the following net dimensions (640mm x 410mm x 65mm) and thus has 17 liters of external charge air volume (OEM 9 liters). The newly developed Competition high-performance mesh (Tube Fine) grants the adjacent components, such as the water cooler, still enough air flow and is also very light. The intercooler has a total weight of only 8.9kg. The cast aluminum end boxes were created in CAD and optimized for the best possible internal airflow using CFD simulations. An air guide integrated in the end box allows a homogeneous filling of the Competition high performance mesh. The intercooler's inlets and outlets were enlarged to Ø 70mm, so this kit comes with reinforced silicone hoses. Overall, this intercooler has far less back pressure than the stock intercooler. In addition, all our intercoolers have an anti-corrosion coating with heat conduction properties. This guarantees permanent and optimal cooling with a significant increase in performance. The assembly is done by replacing the OEM intercooler and is easy to perform. All our products are subject to constant qualitative monitoring. The WAGNERTUNING Competition intercooler kit for the VAG 1,8TSI - 2,0TSI engine is suitable for the following vehicles: - VW Golf 7+7.5 GTI 2,0 TSI 162-228KW/220-310PS (incl. Facelift- Performance and Clubsport[S] models)- VW Golf 7+7.5 R 2,0 TSI 221-228KW/300-310PS (incl. Facelift models)- VW Arteon 2,0 TSI 140-206KW/190-280PS- Skoda Superb 3V 2,0TSI 162KW/220PS- Skoda Superb 3V 2,0TSI 206KW/280PS With further modifications (see notes) on the vehicle, also suitable for:- Audi A3 8V 1,8TSI 132KW/180PS*- Audi A3 8V 2,0TSI 140KW/190PS*- Audi S3 8V 2,0TSI 221-228KW/300-310PS*- Audi TT 8S 2.0TFSI 169KW / 230PS*- Audi TTS 8S 2.0TSI 228KW/310PS*- Seat Leon 5F Cupra 2,0TSI 195-272KW/265-370PS* (incl. Cupra ST 265-370 & Cupra R)- Skoda Octavia 5E 1,8TSI 132KW/180PS* (incl. Cupra ST 265-370/265-370PS*)- Skoda Octavia 5E RS 2,0TSI 162-180KW/220-245PS* (incl. Cupra ST 265-370PS*) Due to the additional adjustments, the installation effort increases to a total of approx. 5-6hrs: Scope of delivery:1 intercooler2 silicone hoses2 hose clamps1 mounting material1 assembly instruction
Intercooler Audi A4 B8 2007- 1.8TFSI, 2.0TFSI: incl. Allroad Wagner Competition kit
The high performance intercooler has the following net dimensions (610mm x 440mm x 65mm = 17.446L), providing 178% more flow area, as well as 158% more intercooler volume compared to the original intercooler. The Competition high performance mesh is a high quality Tube Fin mesh with internal turbulators. As a result, the weight of the intercooler, despite its size, is only 9.1kg. The cast aluminum end boxes were created in CAD and optimized for best possible internal airflow using CFD simulations. An air guide integrated in the end box allows a homogeneous filling of the Competition high performance mesh. The port diameters were increased to Ø67mm, so this kit comes with reinforced silicone hoses. Overall, this intercooler has far less back pressure than the stock intercooler. In addition, all our intercoolers have an anti-corrosion coating with excellent heat conduction properties. This guarantees permanent and optimal cooling with a significant increase in performance. The complete ready-to-install kit, simply replace with the stock intercooler. Tested up to 6 bar and pressure stable. All our products are subject to constant qualitative monitoring. Suitable for racing. The Competition Intercooler Upgrade Kit is suitable for the following vehicles: Audi A4 B8 1,8 TFSI 2008-2013 (MKB:CABA, CDHA, CABB, CABD, CDHB)*.Audi A4 B8 2,0 TFSI 2008-2013 (MKB: CDNB; CAEA; CDNC; CAEB; CFKA)*Audi A4 B8 Allroad 2,0 TFSI 2008-2013 (MKB: CDNB; CAEA; CDNC; CAEB; CFKA)*Audi A5 B8 1,8 TFSI 2008-2013 (MKB:CABA, CDHA, CABB, CABD, CDHB)*Audi A5 B8 2.0 TFSI 2008-2013 (MKB: CDNB; CAEA; CDNC; CAEB; CFKA)*Audi A5 B8 Sportback 1,8 TFSI 2008-2013 (MKB:CABA, CDHA, CABB, CDHB)*Audi A5 B8 Sportback 2,0 TFSI 2008-2013 (MKB: CDNB; CAEA; CDNC; CAEB; CFKA)* * Not suitable in B8.5 Facelift models* For vehicles with dynamic steering, the additional cooling loop must be relocated to a different position. Instructions for this can be found in our installation instructions. Scope of delivery:1 intercooler2 charge air hoses4 hose clamps1 mounting material1 assembly instruction
Intercooler Audi A4 B8 2007- 2.0TD: incl. Allroad Wagner Competition kit
The Competition Intercooler Upgrade Kit is suitable for: Audi A4 B8 2,0 TDI 2008-2013 (100-130KW/136-170PS)*Audi A4 B8 Allroad 2,0 TDI 2008-2010 (100-130KW/136-170PS)*Audi A5 2,0 TDI 2008-2012 (100-130KW/136-170PS)*Audi A5 Sportback 2,0 TDI 2008-2012 (100-130KW/136-170PS)* * Not suitable in B8.5 Facelift models* For vehicles with dynamic steering, the additional cooling loop must be relocated to a different position. Please refer to our installation instructions for instructions. The high performance intercooler has the following net dimensions (610mm x 440mm x 65mm = 17,446L) and thus offers a 178% larger flow area, as well as 158% more charge air volume compared to the original intercooler. The Competition high performance mesh is a high quality Tube Fin mesh with internal turbulators. As a result, the weight of the intercooler, despite its size, is only 9.1kg. The cast aluminum end boxes were created in CAD and optimized for the best possible internal airflow using CFD simulations. An air guide integrated in the end box allows a homogeneous filling of the Competition high performance mesh. The port diameters were increased to Ø67mm, so this kit comes with reinforced silicone hoses. Overall, this intercooler has far less back pressure than the stock intercooler. In addition, all our intercoolers have an anti-corrosion coating with excellent heat conduction properties. This guarantees permanent and optimal cooling with a significant increase in performance. The complete ready-to-install kit, simply replace with the stock intercooler. Tested up to 6 bar and pressure stable. All our products are subject to constant qualitative monitoring. Suitable for racing. Scope of delivery:1 intercooler2 charge air hoses4 hose clamps1 mounting material1 assembly instruction
Intercooler Audi A4 B8 2007- 2.7 TDi, 3.0TDI: incl. Allroad Wagner Competition kit
The Competition Intercooler Upgrade Kit is suitable for: A4 B8 2,7 TDI (140KW/190hp)*A4 B8 3,0 TDI (176KW/240hp)*A4 B8 3,0 TDI (180KW/245hp)*A4 B8 Allroad 2,7 TDI (140KW/190hp)*A4 B8 Allroad 3.0 TDI (176KW/240hp)*A4 B8 Allroad 3.0 TDI (180KW/245hp)*A5 2.7 TDI (140KW/190hp)*A5 3.0 TDI (176KW/240hp)*A5 3.0 TDI (180KW/245hp)*A5 Sportback 2.7 TDI (140KW/190hp)*A5 Sportback 3.0 TDI (176KW/240hp)*A5 Sportback 3.0 TDI (180KW/245hp)* * For B8.5 Facelift models Part number: 200001123* For vehicles with dynamic steering, the additional cooling loop must be relocated to a different position. Please refer to our installation instructions for instructions. The high performance intercooler has the following net dimensions (610mm x 440mm x 65mm = 17,446L) and thus offers a 178% larger flow area, as well as 158% more charge air volume compared to the original intercooler. The Competition high performance mesh is a high quality Tube Fin mesh with internal turbulators. As a result, the weight of the intercooler, despite its size, is only 9.1kg. The cast aluminum end boxes were created in CAD and optimized for the best possible internal airflow using CFD simulations. An air guide integrated in the end box allows a homogeneous filling of the Competition high performance mesh. The port diameters were increased to Ø67mm, so this kit comes with reinforced silicone hoses. Overall, this intercooler has far less back pressure than the stock intercooler. In addition, all our intercoolers have an anti-corrosion coating with excellent heat conduction properties. This guarantees long-lasting and optimal cooling with a significant increase in performance. The complete ready-to-install kit, simply replace with the stock intercooler. Tested up to 6 bar and pressure stable. All our products are subject to constant qualitative monitoring. Suitable for racing. Scope of delivery:1 intercooler2 charge air hoses4 hose clamps1 mounting material1 assembly instruction
Intercooler Audi A4 B8 Facelift 2013- 1.8 TFSI, 2.0 TFSI: incl. Allroad Wagner Competition kit
The high performance intercooler has the following net dimensions (610mm x 440mm x 65mm = 17.446L), providing 178% more flow area, as well as 158% more intercooler volume compared to the original intercooler. The Competition high performance mesh is a high quality Tube Fin mesh with internal turbulators. As a result, the weight of the intercooler, despite its size, is only 9.1kg. The cast aluminum end boxes were created in CAD and optimized for best possible internal airflow using CFD simulations. An air guide integrated in the end box allows a homogeneous filling of the Competition high performance mesh. The port diameters were increased to Ø67mm, so this kit comes with reinforced silicone hoses. Overall, this intercooler has far less back pressure than the stock intercooler. In addition, all our intercoolers have an anti-corrosion coating with excellent heat conduction properties. This guarantees permanent and optimal cooling with a significant increase in performance. The complete ready-to-install kit, simply replace with the stock intercooler. Tested up to 6 bar and pressure stable. All our products are subject to constant qualitative monitoring. Suitable for racing. The Competition Intercooler Upgrade Kit is suitable for the following vehicles: Audi A4 B8.5 1,8 TFSI 2013-2015 (MKB:CJEB/CJED/CJEE)*.Audi A4 B8.5 2.0 TFSI 2013-2015 (MKB:CNCD/CNCE)*Audi A4 B8.5 Allroad 2.0 TFSI 2013-2015 (MKB: CNCD/CNCE)*Audi A5 B8.5 1.8 TFSI 2015- (MKB: CJEB/CJED/CJEE)*Audi A5 B8.5 2.0 TFSI 2013 (MKB: CNCD/CNCE)*Audi A5 B8.5 Sportback 1.8 TFSI 2015- (MKB: CJEB/CJED/CJEE)*Audi A5 B8.5 Sportback 2.0 TFSI 2013- (MKB: CNCD/CNCE)* * For vehicles with dynamic steering, the additional cooling loop must be relocated to a different position. You will find notes on this in our installation instructions. Scope of delivery:1 intercooler2 charge air hoses1 aluminum tube5 hose clamps1 mounting material1 assembly instruction
Intercooler Audi A4 B8 Facelift 2013- 2.0 TDI: incl Allroad Wagner Competition kit
The high performance intercooler has the following net dimensions (610mm x 440mm x 65mm = 17.446L), providing 178% more flow area, as well as 158% more intercooler volume compared to the original intercooler. The Competition high performance mesh is a high quality Tube Fin mesh with internal turbulators. As a result, the weight of the intercooler, despite its size, is only 9.1kg. The cast aluminum end boxes were created in CAD and optimized for best possible internal airflow using CFD simulations. An air guide integrated in the end box allows a homogeneous filling of the Competition high performance mesh. The port diameters were increased to Ø67mm, so this kit comes with reinforced silicone hoses. Overall, this intercooler has far less back pressure than the stock intercooler. In addition, all our intercoolers have an anti-corrosion coating with excellent heat conduction properties. This guarantees permanent and optimal cooling with a significant increase in performance. The complete ready-to-install kit, simply replace with the stock intercooler. Tested up to 6 bar and pressure stable. All our products are subject to constant qualitative monitoring. Suitable for racing. The Competition Intercooler Upgrade Kit is suitable for the following vehicles: Audi A4 B8.5 2.0 TDI 2013-2015 (MKB: CJCA, CJCB, CMFA, CGLC, CGLD, CJCC, CMGB, CJCD)*.Audi A4 B8.5 Allroad 2.0 TDI 2013-2015 (MKB: CJCA, CJCB, CMFA, CGLC, CGLD, CJCC, CMGB, CJCD)*Audi A5 B8.5 2.0 TDI 2013- (MKB: CJCA, CJCB, CMFA, CGLC, CGLD, CJCC, CMGB, CJCD)*Audi A5 B8.5 Sportback 2.0 TDI 2013- (MKB: CJCA, CJCB, CMFA, CGLC, CGLD, CJCC, CMGB, CJCD)* * For vehicles with dynamic steering, the additional cooling loop must be relocated to a different position. Please refer to our installation instructions for instructions. Scope of delivery:1 intercooler2 charge air hoses1 aluminum tube5 hose clamps1 mounting material1 assembly instruction
Intercooler Audi A4 B9 2015- 2.0 TFSI, 35TFSI, 40TFSI, 45TFSI Wagner Competition kit
Competition intercooler kit for Audi A4 B9/A5 F5 suitable for the following vehicles: Audi A4 B9 2,0TFSI ultra 140KW/190hp (2015-2018)Audi A4 B9 2,0TFSI 185KW/252hp (2015-2018)Audi A4 B9 35TFSI 110KW/150hp (2018+)Audi A4 B9 40TFSI 140KW/190hp (2018+)Audi A4 B9 45TFSI 180KW/245hp (2019+)Audi A5 F5 2.0TFSI ultra 140KW/190hp (2016-2018)Audi A5 F5 2.0TFSI 185KW/252hp (2016-2018)Audi A5 F5 35TFSI 110KW/150hp (2018+)Audi A5 F5 40TFSI 140KW/190hp (2018+)Audi A5 F5 45TFSI 180KW/245hp (2019+). The Competition high-performance intercooler has the following mesh dimensions (550mm x 445mm x 70mm = 17,130cc), providing a 134% larger flow area, as well as 105% more charge air volume compared to the original intercooler. The Competition high performance mesh is a high quality Tube Fin mesh with internal turbulators. Despite its size, the total weight of the intercooler is only 9.5kg. The end boxes of the intercooler are made of cast aluminum and have been optimized using flow analysis in the CFD system.The connection diameters are Ø62mm at the intercooler inlet and Ø67mm at the intercooler outlet.The result is excellent cooling properties at lowest backpressure. In addition, all our intercoolers have an anti-corrosion coating with heat conduction properties. This guarantees long-lasting and optimum cooling with a significant increase in performance. Complete ready-to-install kit, simply replace with stock intercooler - plug and play. Tested and pressure stable up to 6 bar. All our products are subject to constant qualitative monitoring. Suitable for racing. Dimensions original intercooler:720mm x 145mm x 80mmV=8,35 LiterA=1044 cm² Dimensions WAGNERTUNING intercooler:550mm x 445mm x 70mmV=17,13 LiterA=2447 cm² Scope of delivery:1 intercooler (black coated)1 silicone hose (black)1 mounting material1 assembly instruction
Intercooler Audi A4 B9 2015- 3.0 TDI, 45TDI, 50TDI Wagner Competition kit
Competition intercooler kit for Audi A4 B9/A5 F5 suitable for the following vehicles: Audi A4 B9 3.0.0TDI 160-200KW/218-272hp (2015-2018).Audi A4 B9 45TDI 170KW/231hp (2019+)Audi A4 B9 50TDI 210KW/286hp (2019+)Audi A5 F5 3.0TDI 160-210KW/218-286hp (2017-2018)Audi A5 F5 45TDI 170KW/231hp (2019+)Audi A5 F5 50TDI 210KW/286hp (2019+). The Competition high-performance intercooler has the following mesh dimensions (550mm x 445mm x 70mm = 17,130cc), providing a 134% larger flow area, as well as 105% more charge air volume compared to the original intercooler. The Competition high performance mesh is a high quality Tube Fin mesh with internal turbulators. Despite its size, the total weight of the intercooler is only 9.5kg. The end boxes of the intercooler are made of cast aluminum and have been optimized using flow analysis in the CFD system. The connection diameters are Ø62mm at the intercooler inlet and Ø67mm at the intercooler outlet. The result is excellent cooling properties at lowest backpressure. In addition, all our intercoolers have an anti-corrosion coating with heat conduction properties. This guarantees long-lasting and optimum cooling with a significant increase in performance. Complete ready-to-install kit, simply replace with stock intercooler - plug and play. Tested and pressure stable up to 6 bar. All our products are subject to constant qualitative monitoring. Suitable for racing. Dimensions original intercooler:720mm x 145mm x 80mmV=8,35 LiterA=1044 cm² Dimensions WAGNERTUNING intercooler:550mm x 445mm x 70mmV=17,13 LiterA=2447 cm² Scope of delivery:1 intercooler (black coated)1 silicone hose (black)1 mounting material1 assembly instruction
Intercooler Audi A5 8T/8F 2007- 1.8TFSI, 2.0TFSI Wagner Competition kit
The high performance intercooler has the following net dimensions (610mm x 440mm x 65mm = 17.446L), providing 178% more flow area, as well as 158% more intercooler volume compared to the original intercooler. The Competition high performance mesh is a high quality Tube Fin mesh with internal turbulators. As a result, the weight of the intercooler, despite its size, is only 9.1kg. The cast aluminum end boxes were created in CAD and optimized for best possible internal airflow using CFD simulations. An air guide integrated in the end box allows a homogeneous filling of the Competition high performance mesh. The port diameters were increased to Ø67mm, so this kit comes with reinforced silicone hoses. Overall, this intercooler has far less back pressure than the stock intercooler. In addition, all our intercoolers have an anti-corrosion coating with excellent heat conduction properties. This guarantees permanent and optimal cooling with a significant increase in performance. The complete ready-to-install kit, simply replace with the stock intercooler. Tested up to 6 bar and pressure stable. All our products are subject to constant qualitative monitoring. Suitable for racing. The Competition Intercooler Upgrade Kit is suitable for the following vehicles: Audi A4 B8 1,8 TFSI 2008-2013 (MKB:CABA, CDHA, CABB, CABD, CDHB)*.Audi A4 B8 2,0 TFSI 2008-2013 (MKB: CDNB; CAEA; CDNC; CAEB; CFKA)*Audi A4 B8 Allroad 2,0 TFSI 2008-2013 (MKB: CDNB; CAEA; CDNC; CAEB; CFKA)*Audi A5 B8 1,8 TFSI 2008-2013 (MKB:CABA, CDHA, CABB, CABD, CDHB)*Audi A5 B8 2.0 TFSI 2008-2013 (MKB: CDNB; CAEA; CDNC; CAEB; CFKA)*Audi A5 B8 Sportback 1,8 TFSI 2008-2013 (MKB:CABA, CDHA, CABB, CDHB)*Audi A5 B8 Sportback 2,0 TFSI 2008-2013 (MKB: CDNB; CAEA; CDNC; CAEB; CFKA)* * Not suitable in B8.5 Facelift models* For vehicles with dynamic steering, the additional cooling loop must be relocated to a different position. Instructions for this can be found in our installation instructions. Scope of delivery:1 intercooler2 charge air hoses4 hose clamps1 mounting material1 assembly instruction
intercooler Audi A5 8T/8F 2007- 2.0TD Wagner Competition kit
The Competition Intercooler Upgrade Kit is suitable for: Audi A4 B8 2,0 TDI 2008-2013 (100-130KW/136-170HP)*Audi A4 B8 Allroad 2,0 TDI 2008-2010 (100-130KW/136-170HP)*Audi A5 2,0 TDI 2008-2012 (100-130KW/136-170HP)*Audi A5 Sportback 2,0 TDI 2008-2012 (100-130KW/136-170HP)* * Not suitable in B8.5 Facelift models* For vehicles with dynamic steering, the additional cooling loop must be relocated to a different position. Please refer to our installation instructions for instructions. The high performance intercooler has the following net dimensions (610mm x 440mm x 65mm = 17,446L) and thus offers a 178% larger flow area, as well as 158% more charge air volume compared to the original intercooler. The Competition high performance mesh is a high quality Tube Fin mesh with internal turbulators. As a result, the weight of the intercooler, despite its size, is only 9.1kg. The cast aluminum end boxes were created in CAD and optimized for the best possible internal airflow using CFD simulations. An air guide integrated in the end box allows a homogeneous filling of the Competition high performance mesh. The port diameters were increased to Ø67mm, so this kit comes with reinforced silicone hoses. Overall, this intercooler has far less back pressure than the stock intercooler. In addition, all our intercoolers have an anti-corrosion coating with excellent heat conduction properties. This guarantees permanent and optimal cooling with a significant increase in performance. The complete ready-to-install kit, simply replace with the stock intercooler. Tested up to 6 bar and pressure stable. All our products are subject to constant qualitative monitoring. Suitable for racing. Scope of delivery:1 intercooler2 charge air hoses4 hose clamps1 mounting material1 assembly instruction
Intercooler Audi A5 8T/8F 2007- 2.7 TDi, 3.0TDI Wagner Competition kit
The Competition Intercooler Upgrade Kit suitable for: Audi A4 B8 2,7 TDI (140KW/190HP MKB:CAMA, CGKA)*Audi A4 B8 3,0 TDI (176KW/240HP MKB:CAPA, CCWA)*Audi A4 B8 Allroad 2,7 TDI (140KW/190HP MKB:CAMA, CGKA)*Audi A4 B8 Allroad 3,0 TDI (176KW/240HP MKB:CAPA, CCWA)*Audi A5 B8 2,7 TDI (140KW/190HP MKB:CAMA, CGKA)*Audi A5 B8 3,0 TDI (176KW/240HP MKB:CAPA, CCWA)*Audi A5 Sportback 2,7 TDI (140KW/190HP MKB:CAMA, CGKA)*Audi A5 Sportback 3,0 TDI (176KW/240HP MKB:CAPA, CCWA)* * For B8.5 Facelift models Part number: 200001123* For vehicles with dynamic steering, the additional cooling loop must be relocated to a different position. Please refer to our installation instructions for instructions. The high performance intercooler has the following net dimensions (610mm x 440mm x 65mm = 17,446L) and thus offers a 178% larger flow area, as well as 158% more charge air volume compared to the original intercooler. The Competition high performance mesh is a high quality Tube Fin mesh with internal turbulators. As a result, the weight of the intercooler, despite its size, is only 9.1kg. The cast aluminum end boxes were created in CAD and optimized for best possible internal airflow using CFD simulations. An air guide integrated in the end box allows a homogeneous filling of the Competition high performance mesh. The port diameters were increased to Ø67mm, so this kit comes with reinforced silicone hoses. Overall, this intercooler has far less back pressure than the stock intercooler. In addition, all our intercoolers have an anti-corrosion coating with excellent heat conduction properties. This guarantees permanent and optimal cooling with a significant increase in performance. The complete ready-to-install kit, simply replace with the stock intercooler. Tested up to 6 bar and pressure stable. All our products are subject to constant qualitative monitoring. Suitable for racing. Scope of delivery:1 intercooler2 charge air hoses4 hose clamps1 mounting material1 assembly instruction
Intercooler Audi A5 8T/8F Facelift 2013- 1.8 TFSI, 2.0 TFSI Wagner Competition kit
The high performance intercooler has the following net dimensions (610mm x 440mm x 65mm = 17.446L), providing 178% more flow area, as well as 158% more intercooler volume compared to the original intercooler. The Competition high performance mesh is a high quality Tube Fin mesh with internal turbulators. As a result, the weight of the intercooler, despite its size, is only 9.1kg. The cast aluminum end boxes were created in CAD and optimized for best possible internal airflow using CFD simulations. An air guide integrated in the end box allows a homogeneous filling of the Competition high performance mesh. The port diameters were increased to Ø67mm, so this kit comes with reinforced silicone hoses. Overall, this intercooler has far less back pressure than the stock intercooler. In addition, all our intercoolers have an anti-corrosion coating with excellent heat conduction properties. This guarantees permanent and optimal cooling with a significant increase in performance. The complete ready-to-install kit, simply replace with the stock intercooler. Tested up to 6 bar and pressure stable. All our products are subject to constant qualitative monitoring. Suitable for racing. The Competition Intercooler Upgrade Kit is suitable for the following vehicles: Audi A4 B8.5 1,8 TFSI 2013-2015 (MKB:CJEB/CJED/CJEE)*.Audi A4 B8.5 2.0 TFSI 2013-2015 (MKB:CNCD/CNCE)*Audi A4 B8.5 Allroad 2.0 TFSI 2013-2015 (MKB: CNCD/CNCE)*Audi A5 B8.5 1.8 TFSI 2015- (MKB: CJEB/CJED/CJEE)*Audi A5 B8.5 2.0 TFSI 2013 (MKB: CNCD/CNCE)*Audi A5 B8.5 Sportback 1.8 TFSI 2015- (MKB: CJEB/CJED/CJEE)*Audi A5 B8.5 Sportback 2.0 TFSI 2013- (MKB: CNCD/CNCE)* * For vehicles with dynamic steering, the additional cooling loop must be relocated to a different position. You will find notes on this in our installation instructions. Scope of delivery:1 intercooler2 charge air hoses1 aluminum tube5 hose clamps1 mounting material1 assembly instruction
Intercooler Audi A5 8T/8F Facelift 2013- 2.0 TDI Wagner Competition kit
The high performance intercooler has the following net dimensions (610mm x 440mm x 65mm = 17.446L), providing 178% more flow area, as well as 158% more intercooler volume compared to the original intercooler. The Competition high performance mesh is a high quality Tube Fin mesh with internal turbulators. As a result, the weight of the intercooler, despite its size, is only 9.1kg. The cast aluminum end boxes were created in CAD and optimized for best possible internal airflow using CFD simulations. An air guide integrated in the end box allows a homogeneous filling of the Competition high performance mesh. The port diameters were increased to Ø67mm, so this kit comes with reinforced silicone hoses. Overall, this intercooler has far less back pressure than the stock intercooler. In addition, all our intercoolers have an anti-corrosion coating with excellent heat conduction properties. This guarantees permanent and optimal cooling with a significant increase in performance. The complete ready-to-install kit, simply replace with the stock intercooler. Tested up to 6 bar and pressure stable. All our products are subject to constant qualitative monitoring. Suitable for racing. The Competition Intercooler Upgrade Kit is suitable for the following vehicles: Audi A4 B8.5 2.0 TDI 2013-2015 (MKB: CJCA, CJCB, CMFA, CGLC, CGLD, CJCC, CMGB, CJCD)*.Audi A4 B8.5 Allroad 2.0 TDI 2013-2015 (MKB: CJCA, CJCB, CMFA, CGLC, CGLD, CJCC, CMGB, CJCD)*Audi A5 B8.5 2.0 TDI 2013- (MKB: CJCA, CJCB, CMFA, CGLC, CGLD, CJCC, CMGB, CJCD)*Audi A5 B8.5 Sportback 2.0 TDI 2013- (MKB: CJCA, CJCB, CMFA, CGLC, CGLD, CJCC, CMGB, CJCD)* * For vehicles with dynamic steering, the additional cooling loop must be relocated to a different position. Please refer to our installation instructions for instructions. Scope of delivery:1 intercooler2 charge air hoses1 aluminum tube5 hose clamps1 mounting material1 assembly instruction
Intercooler Audi A5 8T/8F Facelift 2013- 3.0 TDI Wagner Competition kit
The Competition Intercooler Upgrade Kit suitable for: Audi A4 B8.5 3,0 TDI (150KW/204HP MKB: CLAB)*Audi A4 B8.5 3,0 TDI (180KW/245HP MKB: CDUC, CKVC)*Audi A4 B8.5 Allroad 3,0 TDI (150KW/204HP MKB: CLAB)*Audi A4 B8.5 Allroad 3,0 TDI (180KW/245HP MKB: CDUC, CKVC)*Audi A5 B8.5 3,0 TDI (150KW/204HP MKB: CLAB)*Audi A5 B8.5 3,0 TDI (180KW/245HP MKB: CDUC, CKVC)*Audi A5 Sportback 3,0 TDI (150KW/204HP MKB: CLAB)*Audi A5 Sportback 3,0 TDI (180KW/245HP MKB: CDUC, CKVC)* * For vehicles with dynamic steering, the additional cooling loop must be relocated to a different position. You will find instructions in our installation manual. WAGNERTUNING Competition net with high cooling capacity at low weight (9,1kg)CAD designed freeform end boxes made of cast aluminum for best possible internal airflow178% more cooling surface and 158% more volume (net dimensions 610mm x 440mm x 65mm)enormously less backpressure than the series cooleranti-corrosion coating with heat conduction propertiesoptimal cooling with significant power increasecompletely ready-to-install kit, 100% accurate fiteasy to exchange against series intercoolerThe connection diameter is 67mm on both sides. Scope of delivery:1 intercooler2 charge air hoses4 hose clamps1 mounting material1 assembly instruction
Intercooler Audi A5 F5 2016- 3.0 TDI, 45TDI, 50TDI Wagner Competition kit
Competition intercooler kit for Audi A4 B9/A5 F5 suitable for the following vehicles: Audi A4 B9 3.0.0TDI 160-200KW/218-272hp (2015-2018).Audi A4 B9 45TDI 170KW/231hp (2019+)Audi A4 B9 50TDI 210KW/286hp (2019+)Audi A5 F5 3.0TDI 160-210KW/218-286hp (2017-2018)Audi A5 F5 45TDI 170KW/231hp (2019+)Audi A5 F5 50TDI 210KW/286hp (2019+). The Competition high-performance intercooler has the following mesh dimensions (550mm x 445mm x 70mm = 17,130cc), providing a 134% larger flow area, as well as 105% more charge air volume compared to the original intercooler. The Competition high performance mesh is a high quality Tube Fin mesh with internal turbulators. Despite its size, the total weight of the intercooler is only 9.5kg. The end boxes of the intercooler are made of cast aluminum and have been optimized using flow analysis in the CFD system. The connection diameters are Ø62mm at the intercooler inlet and Ø67mm at the intercooler outlet. The result is excellent cooling properties at lowest backpressure. In addition, all our intercoolers have an anti-corrosion coating with heat conduction properties. This guarantees long-lasting and optimum cooling with a significant increase in performance. Complete ready-to-install kit, simply replace with stock intercooler - plug and play. Tested and pressure stable up to 6 bar. All our products are subject to constant qualitative monitoring. Suitable for racing. Dimensions original intercooler:720mm x 145mm x 80mmV=8,35 LiterA=1044 cm² Dimensions WAGNERTUNING intercooler:550mm x 445mm x 70mmV=17,13 LiterA=2447 cm² Scope of delivery:1 intercooler (black coated)1 silicone hose (black)1 mounting material1 assembly instruction
Intercooler Audi A6 / A7 4G 2010-2018 3.0 BiTDI Wagner Competition kit Evo 1
Suitable for the following models:Audi A6 4G (allroad) 3.0 BiTDI 230KW/313HP 2011-2014Audi A6 4G (allroad) 3,0 BiTDI 235-240KW/320-326HP 2014-Audi A7 4G 3.0 BiTDI 230KW/313HP 2011-2014Audi A7 4G 3,0 BiTDI 235-240KW/320-326HP 2014- The high performance intercooler has the following mesh dimensions (610mm x 440mm x 65mm = 17.446L), providing 178% more flow area, as well as 158% more charge air volume compared to the original intercooler. The Competition high performance mesh is a high quality Tube Fin mesh with internal turbulators. As a result, the weight of the intercooler, despite its size, is only 9.1kg. The cast aluminum end boxes were created in CAD and optimized for the best possible internal airflow using CFD simulations. An air guide integrated in the end box allows a homogeneous filling of the Competition high performance mesh. The port diameters were increased to Ø67mm, so this kit comes with reinforced silicone hoses. Overall, this intercooler has far less back pressure than the stock intercooler. In addition, all our intercoolers have an anti-corrosion coating with excellent heat conduction properties. This guarantees permanent and optimal cooling with a significant increase in performance. The complete ready-to-install kit, simply replace with the stock intercooler. Tested up to 6 bar and pressure stable. All our products are subject to constant qualitative monitoring. Suitable for racing. Scope of delivery:1 intercooler2 intercooler hoses [67mm inlet and outlet].4 hose clamps1 mounting material1 assembly instruction
Intercooler Audi A6 / A7 4G 2010-2018 3.0 TDi Wagner Competition kit
Fits the following models:Audi A6 4G (allroad) 3.0 TDI 150KW/204Pk 2010-2014Audi A6 4G (allroad) 3.0 TDI 160KW/218Pk 2014-Audi A6 4G (allroad) 3.0 TDI 180KW/245Pk 2010-2014Audi A6 4G (allroad) 3.0 TDI 200KW/272PkS 2014-Audi A7 4G 3.0 TDI 150KW/204Pk 2010-2014Audi A7 4G 3.0 TDI 160KW/218Pk 2014-Audi A7 4G 3.0 TDI 180KW/245Pk 2010-2014Audi A7 4G 3.0 TDI 200KW/272PkS 2014- Notes:May require modification for A6 2.7T V6 with automatic transmission Information:Volume: 2x4.25L (90% more cargo volume)Weight: 2x4.2kg Packaging:2x Intercooler (left/right) 220x215x902x carbon air guide (left/right)1x mounting materialAssembly manual
Intercooler Audi A6 / A7 C8 2018- Wagner Competition kit 3.0 TDI
Audi A6 C8 45TDI 170KW/231HP 2018=>Audi A6 C8 50TDI 210KW/286HP 2018=>Audi A7 C8 45TDI 170KW/231HP 2018=>Audi A7 C8 50TDI 210KW/286HP 2018=> The Competition high performance intercooler has the following mesh dimensions (550mm x 445mm x 70mm = 17,130cc), providing a 134% larger flow area, as well as 105% more charge air volume compared to the original intercooler. The Competition high performance mesh is a high quality Tube Fin mesh with internal turbulators. Despite its size, the total weight of the intercooler is only 9.5kg. The end boxes of the intercooler are made of cast aluminum and have been optimized using flow analysis in the CFD system.The connection diameters are Ø62mm at the intercooler inlet and Ø67mm at the intercooler outlet.The result is excellent cooling properties at lowest backpressure. In addition, all our intercoolers have an anti-corrosion coating with heat conduction properties. This guarantees long-lasting and optimum cooling with a significant increase in performance. Complete ready-to-install kit, simply replace with stock intercooler - plug and play. Tested and pressure stable up to 6 bar. All our products are subject to constant qualitative monitoring. Suitable for racing. Dimensions original intercooler:720mm x 145mm x 80mmV=8,35 LiterA=1044 cm² Dimensions WAGNERTUNING intercooler:550mm x 445mm x 70mmV=17,13 LiterA=2447 cm² Scope of delivery:1 intercooler (black coated)1 silicone hose (black)1 mounting material1 assembly instruction
Intercooler Audi A6 / A7 C8 2018- Wagner Competition kit 3.0 TFSI
Audi A6 C8 55TFSI 250KW/340HP 2019=>Audi A7 C8 55TFSI 250KW/340HP 2019=> The Competition high-performance intercooler has the following mesh dimensions (550mm x 445mm x 70mm = 17,130cc), providing a 134% larger flow area, as well as 105% more charge air volume compared to the original intercooler. The Competition high performance mesh is a high quality Tube Fin mesh with internal turbulators. Despite its size, the total weight of the intercooler is only 9.5kg. The end boxes of the intercooler are made of cast aluminum and have been optimized using flow analysis in the CFD system.The connection diameters are Ø62mm at the intercooler inlet and Ø67mm at the intercooler outlet.The result is excellent cooling properties at lowest backpressure. In addition, all our intercoolers have an anti-corrosion coating with heat conduction properties. This guarantees long-lasting and optimum cooling with a significant increase in performance. Complete ready-to-install kit, simply replace with stock intercooler - plug and play. Tested and pressure stable up to 6 bar. All our products are subject to constant qualitative monitoring. Suitable for racing. Dimensions original intercooler:720mm x 145mm x 80mmV=8,35 LiterA=1044 cm² Dimensions WAGNERTUNING intercooler:550mm x 445mm x 70mmV=17,13 LiterA=2447 cm² Scope of delivery:1 intercooler (black coated)1 mounting material1 assembly instruction
Intercooler Audi A6 C5 1997-2011 2.7 Wagner BiTurbo Competition Gen.2 kit met carbon luchtleider
Fits the following models: Audi S4 [B5] 2.7 Biturbo 195KW/265PK 1997-2001Audi A6 [C5] 2.7 Biturbo 169-184KW/230-250PK 1997-2005 Notes:May require modification for A6 2.7T V6 with automatic transmission Information:Volume: 2x4.25L (90% more cargo volume)Weight: 2x4.2kg Packaging:2x Intercooler (left/right) 220x215x902x carbon air guide (left/right)1x mounting materialAssembly manual
Intercooler Audi A6 C5 1997-2011 2.7 Wagner BiTurbo Competition Gen.2 kit zonder carbon luchtleiders
Fits the following models: Audi S4 [B5] 2.7 Biturbo 195KW/265HP 1997-2001Audi A6 [C5] 2.7 Biturbo 169-184KW/230-250HP 1997-2005 Notes:May require modification for A6 2.7T V6 with automatic transmission Information:Volume: 2x4.25L (90% more cargo volume)Weight: 2x4.2kg Packaging:2x Intercooler (left/right) 220x215x901x mounting materialMounting manual
Intercooler Audi Q2 2.0 TFSI 140kw/190pk Wagner Competition kit
- Audi Q2 40TFSI 140KW/190HP Please note!!! vehicle modifications required The Competition intercooler has the following net dimensions (640mm x 410mm x 65mm) and thus has 17 liters of external charge air volume (OEM 9 liters). The newly developed Competition high-performance mesh (Tube Fine) still provides sufficient airflow to the adjacent components, such as the water cooler, and is also very light. The intercooler has a total weight of only 8.9kg. The cast aluminum end boxes were created in CAD and optimized for the best possible internal airflow using CFD simulations. An air guide integrated in the end box allows a homogeneous filling of the Competition high performance mesh. The intercooler's inlets and outlets were enlarged to Ø 70mm, so this kit comes with reinforced silicone hoses. Overall, this intercooler has far less back pressure than the stock intercooler. In addition, all our intercoolers have an anti-corrosion coating with heat conduction properties. This guarantees permanent and optimal cooling with a significant increase in performance. The assembly is done by replacing the OEM intercooler and is easy to perform. All our products are subject to constant qualitative monitoring. The WAGNERTUNING Competition intercooler kit for the VAG 1,8TSI - 2,0TSI engine is suitable for the following vehicles: - VW Golf 7+7.5 GTI 2,0 TSI 162-228KW/220-310HP (incl. Facelift- Performance and Clubsport[S], as well as TCR models)- VW Golf 7+7.5 R 2,0 TSI 221-228KW/300-310HP (incl. Facelift models)- VW Arteon 2,0 TSI 140-206KW/190-280HP- Skoda Superb 3V 2,0TSI 162KW/220HP- Skoda Superb 3V 2,0TSI 206KW/280HP With further modifications (see notes) on the vehicle, also suitable for: - Audi A3 8V 1,8TSI 132KW/180HP*- Audi A3 8V 2,0TSI 140KW/190HP*- Audi S3 8V 2,0TSI 221-228KW/300-310HP*- Audi TT 8S 2.0TFSI 169KW/230HP*- Audi TTS 8S 2.0TSI 228KW/310HP*- Seat Leon 5F Cupra 2,0TSI 195-272KW/265-370HP* (incl. Cupra ST 265-370 & Cupra R)- Skoda Octavia 5E 1,8TSI 132KW/180HP* (incl. Cupra ST 265-370/265-370PS*)- Skoda Octavia 5E RS 2,0TSI 162-180KW/220-245HP* (incl. Cupra ST 265-370PS*) Due to the additional adjustments, the installation effort increases to a total of approx. 5-6hrs: Scope of delivery:1 intercooler2 silicone hoses2 hose clamps1 mounting material1 assembly instruction1 TÜV parts certificate
Intercooler Audi Q5 2.0TFSI Wagner Competition kit
Q5 2.0TFSI (CDNB; CNBC) 2009-2015 132KW/180HPQ5 2.0TFSI (CDNC) 2008-2012 155KW/211HPQ5 2.0TFSI (CNCD) 2012-2015 165KW/225HP The high performance intercooler has the following mesh dimensions (610mm x 440mm x 65mm = 17.446L), providing 178% more flow area, as well as 158% more charge air volume compared to the original intercooler. The Competition high performance mesh is a high quality Tube Fin mesh with internal turbulators. As a result, the weight of the intercooler, despite its size, is only 9.1kg. The cast aluminum end boxes were created in CAD and optimized for the best possible internal airflow using CFD simulations. An air guide integrated in the end box allows a homogeneous filling of the Competition high performance mesh. The port diameters were increased to Ø67mm, so this kit comes with reinforced silicone hoses. Overall, this intercooler has far less back pressure than the stock intercooler. In addition, all our intercoolers have an anti-corrosion coating with excellent heat conduction properties. This guarantees long-lasting and optimal cooling with a significant increase in performance. The complete ready-to-install kit, simply replace with the stock intercooler. Tested up to 6 bar and pressure stable. All our products are subject to constant qualitative monitoring. Suitable for racing. Anti-corrosion coating with heat conduction properties.Optimal cooling with a significant increase in performance.Complete ready-to-install kit, 100% accurate fit.Simply exchange against series intercooler. Scope of delivery:1 intercooler2 charge air hoses4 hose clamps1 mounting material1 assembly instruction
Intercooler Audi Q5 3.0 TDI Wagner Competition kit
Audi SQ5 3.0BiTDI 8R 230KW/313HP 2012-2015 (CGQB)Audi SQ5 3.0BiTDI Competition 8R 240KW/326HP 2015- (CVUB)Audi SQ5 3.0BiTDI Plus 8R 250KW/340HP 2015- (DEHA)Audi Q5 3.0TDI 8R 180KW/245HP 2011-2014 (CDUD)Audi Q5 3.0TDI 8R 190KW/258HP 2013- (CTBA) The high performance intercooler has the following mesh dimensions (610mm x 440mm x 65mm = 17.446L), providing 178% more flow area, as well as 158% more charge air volume compared to the original intercooler. The Competition high performance mesh is a high quality Tube Fin mesh with internal turbulators. As a result, the weight of the intercooler, despite its size, is only 9.1kg. The cast aluminum end boxes were created in CAD and optimized for the best possible internal airflow using CFD simulations. An air guide integrated in the end box allows a homogeneous filling of the Competition high performance mesh. The port diameters were increased to Ø67mm, so this kit comes with reinforced silicone hoses. Overall, this intercooler has far less back pressure than the stock intercooler. In addition, all our intercoolers have an anti-corrosion coating with excellent heat conduction properties. This guarantees long-lasting and optimal cooling with a significant increase in performance. The complete ready-to-install kit, simply replace with the stock intercooler. Tested up to 6 bar and pressure stable. All our products are subject to constant qualitative monitoring. Suitable for racing. OEM intercooler: cooling surface 1207,5cm² / charge air volume 9,05LWT Competition LLK: cooling surface 2684cm² / charge air volume 17,4L All our products are subject to constant qualitative monitoring. Scope of delivery:1 intercooler2 intercooler hoses [67mm inlet and outlet]4 hose clamps1 mounting material1 assembly instruction