Wagner Intercoolers

WAGNER Intercoolers zijn leverbaar als Performance en Competition. Het verschil zit in het type gebruikte gaas. Bij de Performance is dat "Bar & Plate" en bij de Competition "Tube Fin".

Daarnaast zijn er nog 3 verschillende volumes: EVO1, EVO2 en EVO3.

EVO1 is ontwikkeld om gebruikt te worden in combinatie met de originele turbolader met als resultaat een zeer efficiënte koeling van de inlaatlucht. EVO2 en EVO3 hebben een grotere volume en gaan prima samen met de toename van inlaatlucht na een turbolader upgrade. Afhankelijk van het systeem worden ook de in- en uitlaat diameters vergroot.
Deze intercoolers worden met de benodigde siliconen slangen geleverd.

Audi

BMW

Cupra

Fiat

Ford

Honda

Hyundai

KTM

Kia

Lamborghini

Mercedes

Mini

Mitsubishi

Nissan

Opel

Porsche

Renault

Seat

Skoda

Subaru

Suzuki

Toyota

Volkswagen

479 Products

Intercooler Audi RS3 [8P] 2.5 2011- Wagner Competition kit Evo 3

WA200001059.S

RS3 8P Sportback 250KW/340HP (2011-2013) The EVO3 intercooler kit for Audi RS3 8P is a further development of the previously known EVO2 intercooler kit. The high performance intercooler has the following net dimensions (515mm x 367[274]mm x 95mm), providing a 120% larger flow area and 142% more charge air volume compared to the original intercooler. The newly developed Competition high-performance mesh grants sufficient airflow to the adjacent components, such as the water cooler, and is also very lightweight. The end boxes of the charge air cooler are made of cast aluminum and were optimized under flow analyses in the CAD system. With the help of incorporated air baffles, in the entrance, is provided for a uniform filling of the intercooler. The result is excellent cooling properties with minimal back pressure. Thus, this kit is exactly the right thing for racing. The intercooler and the original crossmember form a stable unit and weighs only 11.2kg thanks to the new Competition high-performance mesh. The assembly is done at the original mounting points and is easy to perform(1:1 exchange). An optimal cooling of the charged air with a significant increase in performance! The connection diameter is 68mm on both sides. OEM intercooler: cooling surface 856cm² / charge air volume 6,8LWT EVO 1 Performance: cooling surface 856cm² / charge air volume 9,4LWT EVO 2 Competition: cooling surface 1391cm² / charge air volume 13,2LWT EVO 3 Competition: cooling surface 1890cm² / charge air volume 16,5L All our products are subject to constant qualitative monitoring. Scope of delivery:1 intercooler together with the cross bar1 mounting material1 set of license plate holder1 installation instruction

€1,464.00

Intercooler Audi RS3 [8P] 2.5 2011- Wagner Competition kit Evo 2

WA200001033

RS3 8P Sportback 250KW/340HP(2011-2013) The high performance intercooler has the following mesh dimensions (535mm x 260mm x 95mm), providing a 62.5% larger flow area and 94% more charge air volume compared to the original intercooler. The new Competition high-performance mesh still grants sufficient airflow to the adjacent components, such as the water cooler, and is also very lightweight. The end boxes of the intercooler are made of cast aluminum and were optimized under flow analyses in the CAD system. This intercooler has hevorragende cooling properties and is just right for racing. The intercooler and the original crossmember form a stable unit and weighs less than 10kg thanks to the new Competition high-performance mesh. The assembly is done at the original mounting points and is easy to perform(1:1 exchange). An optimal cooling of the charged air with a significant increase in performance! All our products are subject to constant qualitative monitoring. Scope of delivery:1 intercooler together with the cross bar1 license plate holder 20° inclined1 assembly instruction Remark:special coatingsuitable for racing

€1,464.00

Intercooler Audi RS3 [8P] 2.5 2011- Wagner Competition kit Evo 3.X voor upgrade 600PK+

WA200001059.X

RS3 8P Sportback 250KW/340HP (2011-2013) The EVO3 intercooler kit for Audi RS3 8P is a further development of the previously known EVO2 intercooler kit. The high performance intercooler has the following net dimensions (515mm x 367[274]mm x 95mm), providing a 120% larger flow area and 142% more charge air volume compared to the original intercooler. The newly developed Competition high-performance mesh grants sufficient airflow to the adjacent components, such as the water cooler, and is also very lightweight. The end boxes of the charge air cooler are made of cast aluminum and were optimized under flow analyses in the CAD system. With the help of incorporated air baffles, in the entrance, a uniform filling of the intercooler is ensured. The result is excellent cooling properties with minimal back pressure. Thus, this kit is exactly the right thing for racing. The intercooler and the original crossmember form a stable unit and weighs only 11.2kg thanks to the new Competition high-performance mesh. The assembly is done at the original mounting points and is easy to perform(1:1 exchange). An optimal cooling of the charged air with a significant increase in performance! The connection diameter is 68mm on both sides. OEM intercooler: cooling surface 856cm² / charge air volume 6,8LWT EVO 1 Performance: cooling surface 856cm² / charge air volume 9,4LWT EVO 2 Competition: cooling surface 1391cm² / charge air volume 13,2LWT EVO 3 Competition: cooling surface 1890cm² / charge air volume 16,5L All our products are subject to constant qualitative monitoring. Scope of delivery:1 intercooler together with the cross bar1 mounting material1 set of license plate holder1 installation instruction

€1,657.00

Intercooler Audi RS3 [8P] 2.5 2011- Wagner Competition Kit Gen.2 EVO1

WA200001019

Product video: http://www.youtube.com/watch?v=JGpgXoWxs3c&feature=youtu.be The high performance intercooler has the following external mesh dimensions (535mm x 160mm x 110mm), providing 40% more charge air volume compared to the original intercooler. The newly developed Competition high-performance mesh offers the highest cooling properties at the cutting edge of tube-fin technology. The weight of the intercooler is 6.7kg. CAD designed freeform cast aluminum end boxes for best possible internal airflow. Overall this intercooler has far less back pressure than the stock intercooler. In addition, all our intercoolers have an anti-corrosion coating with heat conduction properties. This guarantees optimal cooling with a significant increase in performance. The installation is done by replacing the OEM intercooler - plug & play - the original intercooler hoses can still be used. All our products are subject to constant qualitative monitoring. The Competition Gen.2 Intercooler Upgrade Kit EVO 1 fits the following vehicles. Audi TTRS 8J 250KW/340HP (2009-2014)Audi TTRS plus 8J 265KW/360HP (2009-2014)Audi RS3 8P Sportback 250KW/340HP (2011-2013) Scope of delivery:1 intercooler1 assembly instruction

€600.00

Intercooler Audi RS3 [8V] 2.5 ACC 2015- Wagner ACC houder

WA001002132

RS3 2.5 TFSI 270kw/367HP 2015- ACC holder for model with Adaptive Cruise Control (ACC)Only fits in combination with EVO 3 Competition kit 200001081 Packing:1x aluminum holder (black coated)mounting materialAssembly manual

€122.00

Intercooler Audi RS3 [8V] 2.5 met ACC 2015- voor upgrade 600PK+ Wagner Competition kit Evo 3.X

WA200001081.ACC.X

EVO 3.X with a new network variant for models from 600 hp Audi RS3 8V Sportback 270KW/367HP 04/2015-04/2016 (*not compatible for vehicles with Adaptive Cruise Control)Audi RS3 8V Sportback/Sedan 294KW/400HP 08/2017+ The high-performance intercooler has the following net dimensions (515mm x 367mm x 95mm [stepped] = 16.5L) and thus offers an 84% larger inflow area and 101% more charge air volume compared to the original intercooler. The newly developed Competition high-performance network provides the adjacent components, such as the water cooler, with sufficient airflow. It is a high quality tube fin mesh with internal turbulators. The end boxes of the intercooler are made of cast aluminum and have been optimized using flow analyzes in the CFD system. With the help of integrated air baffles in the inlet, the charge air cooler is filled evenly. The result is excellent cooling properties with the lowest back pressure. This kit is therefore ideal for racing. In addition, all of our intercoolers have an anti-corrosion coating with thermal conductivity properties. This guarantees permanent and optimal cooling with a significant increase in performance. The intercooler and the crossbar form a stable unit and, thanks to the new Competition high-performance network, weigh only 14.3kg. The assembly takes place at the original attachment points and is easy to carry out (1:1 exchange). Tested up to 6 bar and stable under pressure. All of our products are subject to constant quality monitoring.OEM intercooler:Cooling surface 102400mm² LCharge air volume 8.2LInlet and outlet Ø68mm WT EVO 3 Competition:Cooling surface 189,000mm²Charge air volume 16.5LInlet and outlet Ø68mm Note:v- optional with additional bracket for facelift models with Adaptive Cruise Control ACC (recalibration of the ACC may be necessary) Scope of delivery:1 intercooler together with the crossbeam1 mounting material1 installation instructions1 TÜV parts certificate

€2,166.00

Intercooler Audi RS3 [8V] 2.5 met ACC 2015- Wagner Competition kit Evo 3

WA200001081.ACC.S

EVO 3 Standard version for models up to 600hp. Audi RS3 8V Sportback 270KW/367HP 04/2015-04/2016 (*not compatible for vehicles with Adaptive Cruise Control)Audi RS3 8V Sportback/Sedan 294KW/400HP 08/2017+. The high performance intercooler has the following net dimensions (515mm x 367mm x 95mm [stepped] = 16.5L), providing 84% more flow area, and 101% more charge air volume compared to the original intercooler. The newly developed Competition high-performance mesh grants sufficient airflow to the adjacent components, such as the water cooler. It is a high quality Tube Fin mesh with internal turbulators. The end boxes of the charge air cooler are made of cast aluminum and have been optimized under flow analyses in the CFD system. With the help of incorporated air baffles, in the inlet, a uniform filling of the intercooler is ensured. The result is excellent cooling properties with minimal backpressure. Thus, this kit is ideal for racing. In addition, all our intercoolers have an anti-corrosion coating with heat conduction properties. This guarantees permanent and optimal cooling with a significant increase in performance. The intercooler and the crossbar form a stable unit and weighs, thanks to the new Competition high-performance mesh, only 14.3kg. The assembly is done at the original mounting points and is easy to perform (1:1 exchange). Tested up to 6 bar and pressure stable. All our products are subject to constant qualitative monitoring.OEM intercooler:Cooling surface 102400mm² LCharge air volume 8,2LInlet and outlet Ø68mm WT EVO 3 Competition:Cooling surface 189.000mm²Charge air volume 16,5LInlet and outlet Ø68mm Remark:v- optional with additional bracket for facelift models with Adaptive Cruise Control ACC (possible recalibration of ACC necessary) Scope of delivery:1 intercooler together with the crossmember1 mounting material1 installation instruction1 TÜV parts certificate

€1,932.00

Intercooler Audi RS3 [8V] 2.5 zonder ACC 2015- voor upgrade 600PK+ Wagner Competition kit Evo 3.X

WA200001081.NOACC.X

€2,095.00

Intercooler Audi RS3 [8V] 2.5 zonder ACC 2015- Wagner Competition kit Evo 1

WA200001107

Audi RS3 8V Sportback 270KW/367HP 04/2015?- 04/2016Audi RS3 8V Sportback/Sedan 294KW/400HP 08/2017+ The Competition high-performance intercooler has the following net dimensions (660x180x110 = 13,070cm³), offering a 14% larger flow area, as well as 57% more charge air volume compared to the original intercooler. The Competition high performance mesh is a high quality Tube Fin mesh with internal turbulators. Despite its size, the total weight of the intercooler is only 8.3kg. The end boxes of the intercooler are made of cast aluminum and have been optimized using flow analysis in the CFD system. The result is excellent cooling properties with the lowest backpressure. In addition, all our charge air coolers have an anti-corrosion coating with heat conduction properties. This guarantees permanent and optimal cooling with a significant increase in performance. Complete ready-to-install kit, simply replace with stock intercooler - plug and play. Tested and pressure stable up to 6 bar. All our products are subject to constant qualitative monitoring. Suitable for racing. Dimensions original intercooler:640mm x 163mm x 80mmV=8,3 litersA=1043 cm² Dimensions WAGNERTUNING intercooler:660mm x 180mm x 110mmV=13,07 LiterA=1188 cm² Scope of delivery:1 intercooler (black coated)1 assembly instruction

€1,037.00

Intercooler Audi RS3 [8V] 2.5 zonder ACC 2015- Wagner Competition kit Evo 3

WA200001081.NOACC.S

€1,861.00

Intercooler Audi RS4 2.7 [B5] Wagner Competition kit Evo 2 Gen.2 met carbon luchtleiders

WA200001140.KKIT

RS4 B5 2.7L 280KW/381PS 1997-2001 Volume: 147% additional load volume The high performance intercooler has the following net dimensions (255 mm x 260 mm x 120 mm) and thus offers a 43% larger flow area, as well as 147% more charge air volume compared to the original intercooler. The newly developed Competition high-performance mesh offers the highest cooling characteristics at the cutting edge of tube-fin technology. The end boxes of the intercooler are made of cast aluminum and were optimized using flow analyses in the CAD system. The intercooler kit was developed directly for extremely high performance levels of the Audi RS4, therefore the connection diameters were also increased to Ø65mm on both sides.A maximum cooling of the charged air with a significant increase in performance!This kit also includes air guides made of visually appealing carbon.The assembly takes place at the original mounting points. However, major modifications to the vehicle are necessary in order to install these intercoolers (see installation instructions). All our products are subject to constant qualitative monitoring. Scope of delivery:2 intercoolers (right, left)2 carbon air ducts (right, left)2 air grilles without fog light mounts (right, left)4 silicone hoses8 hose clamps1 mounting material

€2,328.00

Intercooler Audi RS4 2.7 [B5] Wagner Competition kit Evo 2 Gen.2 zonder carbon luchtleiders

WA200001140.SINGLE

€1,739.00

Intercooler Audi RS4 2.7 [B5] Wagner Competition Kit Gen.2 met carbon luchtleiders

WA200001139.KKIT

RS4 B5 2.7L 280KW/381HP 1997-2001 Volume: 2x6L (89% additional cargo volume)Weight: 2x5.2kg The high performance intercoolers have the following mesh dimensions (255mm x265mm x 90mm), providing a 46% larger flow area, and 89% more charge air volume compared to the original intercoolers. The newly developed Competition high-performance mesh offers improved cooling characteristics on the latest Tube-Fin technology. The end boxes of the intercooler are made of cast aluminum and were optimized using flow analyses in the CAD system. The intercooler kit was developed directly for the high demands of the Audi RS4. An optimal cooling of the charged air with a significant increase in performance! In direct comparison to the Performance Gen.1 intercooler, enormous improvements could be shown again. This kit also includes air guides made of visually appealing carbon. The installation is done at the original mounting points and is very easy to perform. Inlet Ø55mm - Outlet Ø65mm All our products are subject to constant qualitative monitoring. Scope of delivery:2 intercoolers (right, left)2 carbon air ducts (right, left)2 air grilles without fog light mounts (right, left)4 silicone hoses8 hose clamps1 mounting material

€2,095.00

Intercooler Audi RS4 2.7 [B5] Wagner Competition Kit Gen.2 zonder carbon luchtleiders

WA200001139.SINGLE

€1,505.00

Intercooler Audi RS4 2.9 TFSI [B9] Wagner Competition Watercooler Kit

WA400001012.OEM

Competition water cooler kit for Audi RS4 B9 / RS5 F5 Plug and Play suitable for the following models: Audi RS4 B9 331KW/450hp from 2017Audi RS5 F5 331KW/450hp from 2017 The 2.9L V6 biturbo engine of the Audi RS4 / RS5 is equipped with an indirect charge air cooling circuit. As a result, the cooling process of the charge air is not realized (as usual) with the ambient air as a cooling medium, but is carried out with the help of a separate cooling water circuit. A reduction in the cooling water temperature can therefore be directly equated with improved charge air cooling performance. This is exactly where the advantages of the WAGNERTUNING Upgrade water cooler come into play.The newly developed competition racing mesh of the WAGNERTUNING high-performance water cooler increases the cooling volume of the standard water cooler by a total of 55%. The ratio between inner and outer cooling surface generates maximum heat transfer and at the same time allows the adjacent components (e.g. the engine water cooler behind it) sufficient air flow for its heat exchange. Furthermore, the water coolers are equipped with a heat-conducting anti-corrosion coating to ensure a long-lasting cooling effect. The installation of the system is also uncomplicated and plug & play with the help of our installation instructions. Dimensions OEM water cooler:720 mm x 485 mm x 25 mmV = 8.73 litersA = 3492 cm² WT water cooler dimensions:690 mm x 490 mm x 40 mmV = 13.52 litersA = 3381 cm

€1,271.00

Intercooler Audi RS4 2.9 TFSI [B9] Wagner Competition Watercooler Kit WT

WA400001012.WT

Plug and Play suitable for the following models: Audi RS4 B9 331KW/450HP from 2017Audi RS5 F5 331KW/450HP as of 2017 The 2.9L V6 biturbo engine of the Audi RS4 / RS5 is equipped with an indirect charge air cooling circuit. As a result, the cooling process of the charge air is not realized (as usual) with the ambient air as a cooling medium, but is carried out with the help of a separate cooling water circuit. A reduction in the cooling water temperature can therefore be directly equated with improved charge air cooling performance. This is exactly where the advantages of the WAGNERTUNING Upgrade water cooler come into play.The newly developed competition racing mesh of the WAGNERTUNING high-performance water cooler increases the cooling volume of the standard water cooler by a total of 55%. The ratio between inner and outer cooling surface generates maximum heat transfer and at the same time allows the adjacent components (e.g. the engine water cooler behind it) sufficient air flow for its heat exchange. Furthermore, the water coolers are equipped with a heat-conducting anti-corrosion coating to ensure a long-lasting cooling effect. The installation of the system is also uncomplicated and plug & play with the help of our installation instructions. Dimensions OEM water cooler:720 mm x 485 mm x 25 mmV = 8.73 litersA = 3492 cm² WT water cooler dimensions:690 mm x 490 mm x 40 mmV = 13.52 litersA = 3381 cm

€1,271.00

Intercooler Audi RS4 2.9 TFSI [B9] Wagner Performance Kit

WA200001162

The 2.9 liter V6 biturbo engine (VW EA839) of the Audi RS4/RS5 models is equipped with an indirect charge air cooling circuit. The cooling process of the charge air is consequently realized by a water-cooled intercooler, which is replaced by the WagnerTuning high-performance intercooler. The WAGNERTUNING high-performance charge air cooler has a new type of performance mesh with the dimensions 222 mm x 200 mm x 120 mm. This was developed specifically for the high demands of the RS4/RS5 engine and offers 185% more external mesh volume compared to the original intercooler. The ratio between internal and external cooling surface used here generates maximum heat transfer and at the same time allows the best possible internal airflow. The cast aluminum end boxes were designed in CAD and optimized with the help of CFD simulations. The result is excellent cooling properties at lowest backpressure. Thus, this kit is also suitable for racing. An optimal cooling of the charged air with a significant increase in performance! All WAGNERTUNING intercoolers are equipped with a heat-conducting anti-corrosion coating, so that a lasting cooling effect is ensured. The installation of the system is also uncomplicated and plug & play with the help of our installation instructions. Advantages of this product:- significantly better cooling performance- less back pressure- more power and torque for your engine- mechanical relief of the turbocharger- 100% pressure resistance- 100% plug and play- up to 4 years warranty Mains dimensions OEM intercooler:220 mm x 100 mm x 85 mmV = 1.87 liters Mains dimensions WT intercooler:222 mm x 200 mm x 120 mmV = 5.33 liters Scope of delivery:1 intercooler2 silicone hoses air6 cooling water hoses1 mounting material1 installation instruction Not approved in the area of the STVO.

€2,328.00

Intercooler Audi RS5 2.9 TFSI [F5] Wagner Competition Watercooler Kit

WA400001012.OEMa

€1,271.00

Intercooler Audi RS5 2.9 TFSI [F5] Wagner Competition Watercooler Kit WT

WA400001012.WTa

€1,271.00

Intercooler Audi RS5 2.9 TFSI [F5] Wagner Performance Kit

WA200001162a

€2,328.00

Intercooler Audi RS6 [4F] C8 [2019-] Wagner Competition kit

WA200001180

Concerns 2 collo Standard intercoolerV = 13.4 LA = 1490 cm² WAGNERTUNING Intercooler:V = 18.9 L (+41%)A = 1802 cm² (+21%) Scope of delivery;2x intercooler2x carbon guides4 silicone hosesmounting materialinstallation manual

€4,057.00

Intercooler Audi RS6 [C5] incl. US model [2002-] Wagner Competition Gen.2 kit met carbon luchtleider

WA200001011.KKIT

4.2 V8 331KW/450HP 2002-2004 Volume: 2x 6.15L (98% more cargo volume)Weight: 2x 6.2kg The high performance intercoolers have the following net dimensions (255x230x105), providing 39% larger flow area, and 98% more charge air volume compared to the original intercooler. The newly developed Competition high-performance mesh offers the highest cooling characteristics at the cutting edge of tube-fin technology. The end boxes of the intercooler are made of cast aluminum and were optimized using flow analyses in the CAD system. The intercooler kit was developed directly for the RS6 C5. An optimal cooling of the supercharged air with a significant increase in performance!This kit also includes air guides made of visually appealing carbon. The assembly takes place at the original mounting points and is very easy to perform. All our products are subject to constant qualitative monitoring. Scope of delivery:2 intercoolers (right, left)2 carbon air guides (right, left)2 air grilles without fog light mounts (right, left)1 silicone hose kit with hose clamps1 mounting material1 Mounting Material

€1,739.00

Intercooler Audi RS6 [C5] incl. US model [2002-] Wagner Competition Gen.2 kit zonder carbon luchtlei

WA200001011.SINGLE

4.2 V8 331KW/450PS 2002-2004 Volume: 2x 6.15L (98% more cargo volume)Weight: 2x 6.2kg The high performance intercoolers have the following net dimensions (255x230x105), providing 39% larger flow area, and 98% more charge air volume compared to the original intercooler. The newly developed Competition high-performance mesh offers the highest cooling characteristics at the cutting edge of tube-fin technology. The end boxes of the intercooler are made of cast aluminum and were optimized using flow analyses in the CAD system. The intercooler kit was developed directly for the RS6 C5. An optimal cooling of the supercharged air with a significant increase in performance!This kit also includes air guides made of visually appealing carbon. The assembly takes place at the original mounting points and is very easy to perform. All our products are subject to constant qualitative monitoring. Scope of delivery:2 intercoolers (right, left)

€1,159.00

Intercooler Audi RS6 [C6] 4F [2005-] Wagner Competition kit

WA200001146.NOACC

Audi RS6 C6 4F 426KW/580HP (2008-2010) OEM intercoolerV = 4.88 LA = 637 cm² WAGNERTUNINGV = 8.73 L (+79%)A = 637 cm² Scope of delivery:2 intercooler black coated (right/left)1 water cooler black coated1 cross bar black coated4 water hoses1 mounting material1 installation instruction

€2,908.00

Intercooler Audi RS6 [C6] 4F [2005-] Wagner Competition kit + ACC module

WA200001146.ACC

€2,908.00

Intercooler Audi RS6+ [C5] incl. US model [2002-] Wagner Competition Gen.2 kit met carbon luchtleide

WA200001010.KKIT

4.2 V8 352W/480HP 2004- Volume: 2x6.15L (98% more volume)Weight: 2x6.2kg (For all RS6 models with auxiliary water cooler behind the intercoolers) The high performance intercoolers have the following net dimensions (255x230x105), providing a 39% larger flow area, as well as 98% more charge air volume compared to the original intercooler. The newly developed Competition high-performance mesh offers the highest cooling characteristics at the cutting edge of tube-fin technology. The end boxes of the intercooler are made of cast aluminum and were optimized using flow analyses in the CAD system. The intercooler kit was developed directly for the RS6 C5. An optimal cooling of the charged air with a significant increase in performance!This kit also includes air guides made of visually appealing carbon. The assembly takes place at the original mounting points and is very easy to perform. All our products are subject to constant qualitative monitoring. Scope of delivery:2 intercoolers (right, left)2 carbon air guides (right, left)2 air grilles without fog light mounts (right, left)1 silicone hose kit with hose clamps1 bracket for the auxiliary water cooler1 mounting material1 Mounting Material

€1,861.00

Intercooler Audi RS6+ [C5] incl. US model [2002-] Wagner Competition Gen.2 kit zonder carbon luchtle

WA200001010.SINGLE

4.2 V8 352W/480HP 2004- Volume: 2x6.15L (98% more volume)Weight: 2x6.2kg (For all RS6 models with auxiliary water cooler behind the intercoolers) The high performance intercoolers have the following net dimensions (255x230x105), providing a 39% larger flow area, as well as 98% more charge air volume compared to the original intercooler. The newly developed Competition high-performance mesh offers the highest cooling characteristics at the cutting edge of tube-fin technology. The end boxes of the intercooler are made of cast aluminum and were optimized using flow analyses in the CAD system. The intercooler kit was developed directly for the RS6 C5. An optimal cooling of the charged air with a significant increase in performance!This kit also includes air guides made of visually appealing carbon. The installation is done at the original mounting points and is very easy to perform. All our products are subject to constant qualitative monitoring. Scope of delivery:2 intercoolers (right, left)1 bracket for the auxiliary water cooler1 mounting material1 Mounting Material

€1,271.00

Intercooler Audi RSQ3 [8U] 2.5 2011- Wagner Competition kit Evo 2

WA200001082

RS3 2.5 RS TFSI 228/250/270kw/310/340/367HP (2013-) Volume: 15.6LWeight: 11.2kg The high performance intercooler has the following mesh dimensions (600mm x 260mm x 100mm), providing 87% larger flow area and 70% more charge air volume compared to the original intercooler. The newly developed Competition high-performance mesh grants sufficient airflow to the adjacent components, such as the water cooler, and is also very lightweight. The end boxes of the charge air cooler are made of cast aluminum and were optimized under flow analyses in the CAD system. With the help of incorporated air baffles, in the entrance, a uniform filling of the intercooler is ensured. The result is excellent cooling properties with low back pressure. Thus, this kit is exactly the right thing for racing. The intercooler and the original crossmember form a stable unit and weighs only 11.2kg thanks to the new Competition high-performance mesh. The assembly is done at the original mounting points and is easy to perform(1:1 exchange). An optimal cooling of the charged air with a significant increase in power! 66mm inlet and outlet. OEM intercooler: cooling surface 832cm² / charge air volume 9,15LWT EVO 2 Competition: cooling surface 1560cm² / charge air volume 15,6L All our products are subject to constant qualitative monitoring. Scope of delivery:1 intercooler together with the cross bar1 mounting material1 installation instruction Remark: only for racing

€1,861.00

Intercooler Audi RSQ3 [F3] 2.5 2019- Wagner Competition kit Evo 1

WA200001107a

Audi RSQ3 F3 294KW/400HP 10/2019+ Competition's high-performance intercooler has the following net dimensions (660x180x110 = 13,070cm³) and thus offers a 14% larger intake area and 57% more charge air volume compared to the original intercooler. Competition's high-quality mesh is a high-performance tubular fin with internal turbulators. Despite its size, the total weight of the intercooler is only 8.3 kg. The end tanks of the intercooler are cast aluminum and were optimized using flow analysis in the CFD system. The result is excellent cooling properties with minimal back pressure. In addition, all our charge air coolers have a corrosion-resistant coating with heat-conducting properties. This guarantees permanent and optimal cooling with a significant performance increase. Fully installation-ready kit, simply replace with series intercooler - plug and play. Tested and pressure stable up to 6 bar. All our products are under constant quality control. Suitable for racing. Dimensions original intercooler:640mm x 163mm x 80mmV=8.3 literA=1043 cm² Dimensions WAGNERTUNING intercooler:660mm x 180mm x 110mmV=13.07 literA=1188 cm² Scope of delivery:1 intercooler (black coated)1 mounting instruction

€1,037.00

Intercooler Audi RSQ3 [F3] 294KW/400PS 10/2019- Wagner Competition kit Evo 3

WA200001167

Audi RSQ3 F3 294KW/400HP 10/2019+ The high performance intercooler has the following mesh dimensions (515mm x 367mm x 95mm [stepped] = 16,500cm³), providing 84% more flow area, as well as 101% more charge air volume compared to the original intercooler. The newly developed Competition high-performance network grants sufficient airflow to the adjacent components, such as the water cooler. It is a high quality Tube Fin net with internal turbulators. The end boxes of the charge air cooler are made of cast aluminum and were optimized under flow analyses in the CFD system. With the help of incorporated air baffles, in the inlet, a uniform filling of the intercooler is ensured. The result is excellent cooling properties with minimal back pressure. Thus, this kit is suitable for racing. In addition, all our intercoolers have an anti-corrosion coating with heat conduction properties. This guarantees permanent and optimal cooling with a significant increase in performance. The intercooler and the original crossmember form a stable unit and weighs, thanks to the new Competition high-performance mesh, only 11.7kg. The installation is done at the original mounting points and is easy to perform (see installation instructions for slight adjustments). Tested and pressure stable up to 6 bar. All our products are subject to constant qualitative monitoring. OEM intercooler:Cooling surface 1024cm² / charge air volume 8,2LInlet and outlet Ø68mm WT EVO 3 Competition:Cooling surface 1890cm² / charge air volume 16,5LInlet and outlet Ø68mm Scope of delivery:1 intercooler together with the cross bar1 mounting material

€1,861.00

Intercooler Audi S1 2.0 TSi vanaf 2014 Wagner Competition kit

WA200001077

2.0 TSI 170kw/231hp 2014-. The Competition high performance intercooler has the following mesh dimensions (620mm x 175mm x 110mm/stepped = 10,100cc), providing a 44% larger flow area and 68% more charge air volume compared to the original intercooler. The Competition high-performance mesh offers very good cooling properties. CAD designed free-form cast aluminum end boxes for best possible internal airflow. Overall, this intercooler has much less back pressure than the stock intercooler. In addition, all our intercoolers have an anti-corrosion coating with heat conduction properties. This guarantees optimum cooling with a significant increase in performance. Complete ready-to-install kit, simply replace with stock intercooler - plug and play. Tested up to 6 bar and pressure stable. All our products are subject to constant qualitative monitoring. Suitable for racing. 60mm inlet and outlet. Scope of delivery:1 intercooler1 mounting material1 installation instructions

€1,057.00

Intercooler Audi S2/RS2 B4 2.2L 1990-1995 Wagner Competition EVO1 Gen.2 kit

WA200001012

2.2L 162-169KW - 220-230 HP Volume: 8.7LWeight: 8.0 kg The high performance intercooler has the following net dimensions (500mm x 205mm x 85mm), offering a 10% larger flow area, as well as 45% more intercooler volume compared to the original RS 2 intercooler. The newly developed Competition high-performance mesh offers the highest cooling characteristics on the latest Tube-Fin technology. The end boxes of the intercooler are made of cast aluminum and were optimized using flow analyses in the CAD system. The intercooler kit was developed directly for the S2/RS2. An optimal cooling of the charged air with a significant increase in performance!The assembly is done by replacing the OEM intercooler and is easy to perform. All our products are subject to constant qualitative monitoring. Scope of delivery:1 Intercooler EVO1 Gen.21 Stainless steel adapter for Audi S2/RS2 crossmember1 mounting material *) in combination with adjacent RS2 technology Translated with www.DeepL.com/Translator (free version)

€498.00

Intercooler Audi S2/RS2 B4 2.2L 1990-1995 Wagner Competition EVO2 Gen.2 kit

WA200001014

2.2L 162-169KW - 220-230 HP Volume: 9.9LWeight: 8.0kg Version for short WAGNER intake manifold 160001001 The high performance intercooler has the following net dimensions (500mm x 220mm x 90mm V=9.9Liter), offering an 18% larger flow area, as well as 65% more intercooler volume compared to the original RS 2 intercooler. The newly developed Competition high-performance mesh offers the highest cooling characteristics at the cutting edge of tube-fin technology. The end boxes of the intercooler are made of cast aluminum and were optimized using flow analyses in the CAD system. The intercooler kit was developed directly for the S2/RS2 in conjunction with our short intake manifold. The installation is done by replacing the OEM intercooler and is easy to do. An optimal cooling of the supercharged air with a significant increase in performance! Intercooler EVO2 Gen.2 WAGNER S2/RS2Stainless steel cross barPiping for additional air slideSilicone hose from LLK to throttle valveSilicone adapter 50/70mm LLK inletSilicone hose for auxiliary water coolerMounting material

€1,007.00

Intercooler Audi S2/RS2 B4 2.2L 1990-1995 Wagner Intercooler EVO2 Gen.2

WA001001001-TF

2.2L 162-169KW - 220-230HP Version for S2/RS2 with short intake tubeIntercooler mesh dimensions: 500x220x90This is the intercooler from kit 200001014

€691.00

Intercooler Audi S3 8L 1999- 1.8 Wagner Performance kit

WA200001018

S3 [8L] 1.8T 1999-2001 154KW/210HP (APY, AMK, AUL)S3 [8L] 1.8T 2001-2003 165KW/225HP (BAM) Volume: 10.65LWeight: 9.7kg Maximum cooling of the charge air.More power through improved performance cooling network.The air header is made of cast aluminum (CAD optimized) and is extremely pressure resistant.60mm inlet/70mm outlet (ideal for larger throttle bodies).Plug & Play. No adjustment work necessary. Intercooler is mounted before the original water and air conditioning package. The high performance intercooler has the following net dimensions 600 x 355 x50, 10.650cm³ volume. An optimal cooling of the charged air with a significant increase in power!Original intercooler: 2pcs. 174mm x 183mm x 85mm, 2.700cm³ Scope of delivery:1 intercooler2 silicone hoses4 hose clamps1 mounting material1 assembly instruction

€803.00

Intercooler Audi S3 8P 2006- 2.0 Wagner Competition kit Gen.2

WA200001034aM

2.0 195KW/265HP 2006-2012 Volume: 17.4LWeight: 9.3kg The revised Competition Gen.2 intercooler kit for the VAG models with the 1st & 2nd generation 2.0T(F)SI engine. The Competition intercooler has the following net dimensions (610mm x 440mm x 65mm / 17.45L), providing a 10% larger flow area and 50% more intercooler volume compared to the original Audi S3 intercooler. The newly developed Competition high-performance mesh still grants enough airflow to the adjacent components, such as the water cooler, and is also very light (S3 OEM 8kg / WAGNERTUNING 9.2kg) . CAD developed freeform end boxes with incorporated cast aluminum air baffle for best possible internal air distribution.The CNC machined hose connections were enlarged to Ø67mm , so this kit comes with matching silicone hoses.Overall this intercooler has far from less back pressure than the stock cooler.In addition, all our intercoolers have an anti-corrosion coating with heat conduction properties. This guarantees optimal cooling with a significant increase in performance.Installation is done by replacing the OEM intercooler and is easy to perform.All our products are subject to constant qualitative monitoring.Available with TÜV parts certificate for many vehicles. The WAGNERTUNING Competition intercooler kit for the VAG 2,0TFSI / TSI engine is suitable for the following vehicles: ? Audi A3 8P 1,8 TFSI 118KW/160HP (2007-2012)? Audi A3 8P 2,0 TFSI 147KW/200HP (2004-2012)? Audi S3 8P 195KW/265HP (2006-2012)? Audi TT 8J 1.8 TSI 118KW/160HP (2008-2014)? Audi TT 8J 2,0 TFSI 147-155KW/200-211HP (2006-2014) (not MKB. CETA; CESA)? Audi TTS 8J 200KW/272HP (2008-2014) (not MKB. CETA; CESA) ? Volkswagen Golf 5 GTI (incl.ED 30) 147-169KW/200-230HP (2004-2008)? Volkswagen Golf 6 GTI (incl.ED 35) (Convertible) 155-173KW/211-235HP (2009-2013)? Volkswagen Golf 6 R (incl. Convertible) 199KW/270HP (2009-2013)? Volkswagen Scirocco 3 2.0 TSI 147-162KW/200-220HP (2008-2015)? Volkswagen Scirocco 3 R 195-206KW/265-280HP (2009-2015)? Volkswagen EOS 2.0 TFSI 147KW/200HP (2006-2009)? Volkswagen EOS 2.0 TFSI 155KW/211HP (2009-2014)? Volkswagen Jetta 5 2.0 TFSI 147KW/200HP (2005-2010)? Volkswagen Jetta 6 2.0 TSI 147-155KW/200-211HP (2010-2014)? Volkswagen Passat B6 1.8 TSI 118KW/160HP (2007-2010)? Volkswagen Passat B6 2.0 TSI 147KW/200HP (2005-2010)? Volkswagen Passat B7 1.8 TSI 118KW/160HP (2010-2012)? Volkswagen Passat B7 2.0 TSI 155KW/211HP (2010-2014)? Volkswagen Passat CC 1.8 TSI 188KW/160HP (2008-2012)? Volkswagen Passat CC 2.0 TFSI 147KW/200HP (2008-2010)? Volkswagen Passat CC 2.0 TSI 155KW/211HP (2010-2014)? Volkswagen Beetle 2.0 TSI 147-162KW/200-220HP (2011-) ? Skoda Octavia 1Z 1,8 TSI 118KW/160HP (2008-2013)? Skoda Octavia 1Z MK2 RS 147KW/200HP (2005-2009)? Skoda Octavia 1Z MK2 RS 155KW/211HP (2009-2013)? Skoda Suberb 3T 2.0 TSI 147KW/200HP (2010-2013) ? Seat Leon 1P 1,8 TFSI 118KW/160HP (2009-2012)* ?? Seat Leon 1P 2,0 TFSI 136KW/185HP (2005-2006)* ?? Seat Leon 1P FR 147KW/200HP (2006-2009)* ?? Seat Leon 1P FR 155KW/211HP (2009-2012)* ?? Seat Leon 1P Cupra 177KW/241HP (2007-2011)* ?? Seat Leon 1P Cupra R 195KW/265HP (2009-2012)* ?? Seat Leon 1P Copa Edition 210KW/286HP (2008)* ?? Seat Leon 1P Cupra R310 LE 228KW/310HP (2009-2012)* ?? Seat Leon 1P Cupra R310 WCE 228KW/310HP (2009-2012)* ? * slight modifications to the vehicle necessary Scope of delivery:1 intercooler2 silicone hoses4 hose clamps1 aluminum adapter1 assembly instruction

€996.00

Filter products